Upgrade from CRM 5.0 to 5.1 or 5.2 or 2007

Hi All,
Can we upgrade from SAP CRM 5.0 to SAP CRM 5.1 or SAP CRM 5.2 or 2007 ?
If yes, is there any upgrade path or documentation ?
Regards
Sandeep G

Hi Shalini
Thaks a lot for your swift reply.
Shalini, can you provide any documents to justify your statement, as i need this to pass on to a client. Further is PCUI available in 5.1 or 5.2?
Regards
Sandeep G

Similar Messages

  • Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

    Hello together,
    The system  of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
    In the Billing Due List a dump occurs when clicking on an item and then on conditions
    Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
    (Other classes are  new generated after the upgrade)
    During the Analysis we looked to the billing engine navigator:
    In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
    We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
    Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
    BR, Anne

    Hi Nawanit,
    we checked the key figure settings and categories. Everything is maintained correctly.
    Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
    BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
    "Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
    As far as we work with ECC 6.0, EHP4 this message makes no sense.
    Does anyone have another idea?
    Thanks
    Jan

  • Upgrading from CRM 3.1 to 5.0

    Hi experts!
    Can anyone of you tell me about risks and scope (what must be done) regarding upgrading from CRM 3.1 to 5.0? Do you have any links to good documentation?
    Thanks, Camilla

    Hello Camilla,
    For the moment, to upgrade to CRM5.0, it will be a rampup project : https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000654884&.
    Regarding the upgrade, have a look in the 'Upgrade Master Guide mySAP CRM 2005 (SAP CRM 5.0)'
    https://websmp106.sap-ag.de/~sapidb/011000358700005413872005E.
    Best Regards,
    Frédéric

  • Upgrade from CRM 5.0 to CRM 7.0 MY Worklist  Worklist

    Hello,
    we're upgrading from CRM 5.0 Interaction Center  to CRM 7.0. The client is using MYWORKLIST in CRM 5.0. In CRM 7.0 I found
    following three options for Worklist in Navigational Bar:
    CH-WORKLST
    CT-WORKLST
    ICM-WRKLST
    Please let me know which one is closer to MY_WORKLIST.
    Thanks,
    Saeed
    Edited by: Saeed Ahmad on Aug 19, 2010 7:52 PM

    Hi,
    We have resloved issue using  my activities from PRO* roles.
    Regards,
    Saeed
    Edited by: Saeed Ahmad on Oct 12, 2010 4:45 PM

  • Upgradation from CRM 4.0 to CRM 7.0 with respect to sales order.

    Hi All,
    Can you please tell me what are all the  'EEWB enchacement changes' to be carried out during upgrade from CRM 4.0 to CRM 7.0 with respect to sales order..
    Thanks & Regards
    Prasanna

    hi
    check out the upgradation Note available in the Master Lists for upgradation.

  • Reasons to upgrade from CRM 4.0 to CRM 7.0 ?

    Hi Experts,
    We have CRM 4.0 working on our client system. Why should they upgrade from CRM 4.0 to CRM 7.0 ?
    A few reasons that I can think of are :
    1)  SAP will not support CRM 4.0 -
    But they can get maintenance support from SAP although at a higher cost
    2) CRM WebClient - fast and easy to configure and maintain -
    but this is not so convincing a reason that they should upgrade   and then almost implement whole of CRM again. They already have Portal.
    3) Some new functionality added by SAP in the newer versions-----That is good but their business is working good with the existing functionality of CRM 4.0
    Please provide some compelling reasons so that we can ask our client to go for upgrade.
    Thanks in advance.
    Regards,
    Vikas

    Hi Vikas,
    Although your customer happy with the functions in CRM 4.0, and they are willing to pay extra money for extended maintenance fee. SAP will end the support of CRM 4.0 sooner for later.
    Other reasons I could mention:
    1. if there is Java stack then the support of jave stack and the jdk version 1.3.1 is ended.
    2. CRM architecture was changed since CRM 6.0 and and 7.0 provided New tools and assistants simplify, standardize, and reduce development effort significantly, i.e. less code development, more flexible customizing. From this prospective, 7.0 is the investment safe release for long-term
    3. Enhancement of existing functions, details can be found in CRM 7.0 Release notes
    4. If you use compoenent like TREX, definately you will be benefit from newer version, stable, faster etc.
    There should be a lot, and you can order upgrade value proposition service from SAP for formal evaluation.
    Cheers,
    Denny

  • Collision Detection during Upgrade from CRM 4.0 to CRM 2007

    We are in the process of doing an upgrade from CRM 4.0 to CRM 2007. As part of this upgrade we are following the steps detailed in the mobile upgrade guide. we are currently working on the collision
    resolution issues in the mobile area. The latest issue on the UI layer is caused by changes on tiles like docactdocu2 or capsearch2 that were reverted to standard SAP.
    When solving the collisions we have been working on sub objects to these tiles. When changes to theses sub objects were finished not only the collision for the sub object was solved but no collision on the parent object was shown. But the result was that the parent objects have returned to SAP standard on vital objects like custom anchors and/or custom controllers are missing on these tiles resulting in build errors. You can easily see what happened in the version tree of these objects as no merge between the changed branch and the SAP branch took place.
    Returning to the tiles version from the changed branch is not possible though this function is offered in the version tree.
    Why is the collision resolution functionality not working as we would expect. Why can we not chsange the tile version to the changed branch.
    Has anyone else experienced these issues
    Regards
    Eddie

    Hi Shankar
    We resolved collisions on script level like "docactdocu2onLoad" by merging or accepting the change list (SAP) version. With the collision on script level being resolved the tile the script belongs to (in this case "docactdocu2") also vanished from the collision list.  The result was that the tile was reverted to the SAP version.
    With the change list being released we cannot go back to the custom version of the tile except by using the version tree. But the option "Copy to Open Version" offered by a right click on the version node wanted does not work.
    Any ideas
    Regards
    Eddie

  • Upgrade from CRM 2011 to CRM 2015

    Hello,
    Can we upgrade from crm 2011 to crm 2015 without going to crm 2013? If yes, Can you please let us know the steps involved, very briefly?
    Can I import organisation from crm 2011 to crm 2015?
    thanks,
    Red

    Hello,
    Unfortunately you can't. Recheck
    this article.
    Dynamics CRM MVP/ Technical Evangelist at
    SlickData LLC
    My blog

  • How to create new field while upgrading from CRM 4.0 to 7.0

    Hi ,
    How do we create new field on UI and store data into existing field in database?
    Is there any option in AET to skip the creation of new field in the database table ?
    Custom field is already created in GUI and database table while using CRM 4.0
    Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
    Using AET may create new field again in the database table.Please suggest.
    New filed needed to be created in Marketing Campaign Element Header data.
    Thanks
    Jayasri

    Hi Jayasri,
    As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
    These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
    For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
    For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
    I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
    Refer
    FAQ - SAP CRM Upgrade from release 4.0 to 7.0 
    Regards,
    Arjun

  • Error in GENSTATUS during upgrade from CRM 4.0 to CRM 2007

    Dear experts
    We have 12 errors in GENSTATUS after upgrading our CRM system from 4.0 to 2007. I don't know how to solve them - I had a look at SDN forum, OSS notes without success. Our system was previously connected to MSA but we want to turn it off part of this upgrade.
    Below are the generation errors. I couldn't solve any of them:
    CNBCCPSAP00070            CG          GNREP                  E              F              Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
    CNBCCPSAP00070            CG          LUTAB                   E              F              Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
    MSV_COUNTER               CG           GNREP                  E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    MSV_COUNTER               CG           LUTAB                   E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71                PUBLI                    E              F              Database access error using table SMOG_GFUGR
    F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
    F000000273CG CDF390E3E874144F8399B0F88E37F9F2      PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
    MSV_COUNTER               HT           GNREP                  E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    MSV_COUNTER               HT           LUTAB                   E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    0000000034HT B49F577F7D5BD3118A5F00A0C9AA8D71  PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK_IL2
    F000000273HT 42411AD9608668DAE10000000A1552B6    PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
    F000000272HT 42411ADC608668DAE10000000A1552B6    PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
    Thanks a lot in advance for your help
    Best regards
    Stephanie

    Hi Stephanie
    Did you find a resultion to your genstatus issue.
    We are in a similar issue currently - we have the following errors
    CNBCCPSAP00070            CG
    CNBCCPSAP00070            CG
    DOC_HEADER                CG
    S000000290CG 98FBC48FBE4A0040888E14E1C27C7262
    CAMPAIGN_WRITE            CG
    Look forward to your response on this
    Regards
    Eddie

  • B2b application upgrading from crm 5.0 to  7.0

    hi,
    I am a java developer.I am very new to sap and nwds and nwdi. I am having a custom crm B2B application built on java and struts, and a standard application.My sap BASIS team upgraded backend components from crm 5.0 to 7.0.Now they asked me to change the ear file. I don't know what to change and just asked them to deploy the old ear file using SDM.They deployed it using SDM.Though standard application is working proper,custom application is not working.So,what changes should I do now to make custom application work.And I don't have NWDI,what ever I want to do I have to do with NWDS.

    hi Jun Wu,
    First of all thanks for your reply..What basics sholud I need have, to get help from some body ??...Does SAP shouldn't be learned by people who doesn't know sap??

  • Upgrade from CRM 5.0 to CRM 2007

    Hi,
    We are planning to update from CRM 5.0 to CRM 2007. We are using CRM for Leads, Opportunities and Account & Contact Management with PCUI as front end. We do have some customized iViews for Sales People and Customers. Can any one, please provide me the step-by-step process to do technical and functional upgrade or point me towards the documentation on the same
    You will rewarded with the points. Thanks in advance. Please, Its URGENT...
    Cheers,
    Amit

    Amit,
    Based on your reply your work looks like the following:
    1.  Basis teams performs tech upgrade of your dev system
    2.  Security team grants temporary expanded access in dev system to access new UI and new UI tools
    3.  Dev/Config team takes standard delivered new UI screens and adjusts screen layouts
    4.  Dev/Config team adjusts any BADI's built in the previous release
    The data model of CRM has not changed.  If you stuck with the EEWB and used all the standard methods of enhancing the data model, you don't need to worry about data migration.  However if you did not play by the SAP standards you could have more work.
    As far as tracking your project you can use solution manager or build simple project tracking in MS project.
    If you did no coding period, and only configuration.  You should be able to complete all the configuration work in less than two weeks to get the screens as needed.  However that is based on having at least one to two weeks of learning the new UI tool.
    I would guess a config-only CRM implementation would only need two-three to finish all reconcilation work not including testing and training.
    Take care,
    Stephen

  • B2b application upgrade from crm 5.0 to 7.0

    hi,
    I am a java developer. I don't know to what to do with NWDI.Now i want to upgrade a custom application done in java  from crm 5.0 to 7.0 for .I have seen this http://scn.sap.com/community/crm/web-channel/blog/2012/10/22/how-to-upgrade-a-modified-crm-webchannel-or-e-commerce-application-based-on-java link. Where I can't understand any thing.Now I am having an ear file of that custom java code.I don't where to start. Please help me....
    Regards,
    Aravind.

    hi Jun Wu,
    First of all thanks for your reply..What basics sholud I need have, to get help from some body ??...Does SAP shouldn't be learned by people who doesn't know sap??

  • JAVA Upgrade from CRM 5.0 to CRM 2007

    Hi,
    I need help.  I'm trying to upgrade our CRM 5.0 to CMR2007 and encountered a problem during the JAVA Prepare Phase.
    Here is the error I received.
    The execution of  ended in error.                                                                               
    Could not load class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId.  
    com.sap.sdt.util.misc.LoaderException: Class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId not found using classpath.
    com.sap.sdt.ucp.pce.ctrl.PhaseLoaderException                          
    Could not load class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId.
    DETERMINE_SIDS                                                         
    INIT                                                                   
    PREPARE                                                                
    NetWeaver Upgrade                                                      
    SAPJup                                                                 
    Java Upgrade  
    Thanks,

    Hi Ramon,
    In subdirectory trc you should find a file SAPJup.TRC containing some more details on the exception that happened. Add the stack if you find it there.
    PhaseTypeDetermineSystemId is the first phase class to be loaded from package lib/sdt_j2ee.jar. So, you should check if this jar is around.
    Regards,
    Thomas

  • Upgrade from CRM 5.0 to CRM 7.0 - ISA

    Hi All,
    Currently we have CRM 5.0 implementing ISA applications, and soon we wil be upgrading to CRM 7.0.
    We have some customised ISA applications running on 5.0, so during this Upgrade process, what would be the techincal approach for the ISA applications to be able run fine with new CRM 7.0.
    Please guide me with your inputs about how to go on with this upgrade process.
    Thanks,
    Aman.

    There are changes in the flow and the files of CRM ISA 7.0...donot compare things with 5.0...we had to start from scratch...

Maybe you are looking for