Upgrade from CRM 6.0 to CRM 7.0 without upgrading MSA

Hi all,
we are currently running CRM 6.0 with the Mobile Client for a field sales group of 2000 users and we have some plans to move to the latest release being CRM 7.0. As upgrading MSA for 2000 users is extensive task we would like to know if it is possible to upgrade the backend to 7.0, but without upgrading the MSA to 7.0. Is there a way with some cheats and tricks to manipulate some tables in order to make it work with a CRM 7.0 backend system ?
Thanks,
Christophe

Hi Christophe,
We do not support the landscape which you are planning to move into. This sceanrio is not validated either.
Refer to SAP Notes
1226055 - SAP CRM 7.0 Mobile Client Component: Collective Note
1095553 - SAP CRM 2007 Mobile Client Component: Collective Note
These Notes give you information on Client-Server mapping which is officially supported by SAP.
Regards,
Ganga

Similar Messages

If i got an iphone 5 and synced it with my computer, can i get the contract from my iphone 4 to a iphone 5 without upgrading the contract? (So that i will still have the same contract)

If i got an iphone 5 and synced it with my computer,
can i get the contract from my iphone 4 to a iphone 5 without upgrading the contract?
(So that i will still have the same contract) (I have verizon.)

Ask Verizon.
You will have to activate the phone through them.

I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

http://support.apple.com/kb/TS2755

Is it okay to upgrade from os x 10.6.8 to yosemity without first getting the other operating systems?

is it okay to upgrade from os x 10.6.8 to yosemity without first getting the other operating systems?

Hey there jpenilla,
Welcome to Apple Support Communities.
Yes. The webpage below provides the answer to your question, about upgrading to Yosemite from OS X Snow Leopard (v10.6.8), and it provides additional information that you may find helpful.
Apple - OS X Yosemite - How to Upgrade
You can upgrade to OS X Yosemite from the following:
OS X Snow Leopard (v10.6.8)
OS X Lion (v10.7)
OS X Mountain Lion (v10.8)
OS X Mavericks (v10.9)
So long,
-Jason

How can I upgrade from Photoshop CS4 to Cs 5 or 6 without buying the creative cloud?

How can I upgrade from Photoshop CS4 to Cs 5 or 6 without buying the creative cloud?

Well CS5's ship has sailed.
CS6 can still be purchased on Perpetual License but it's not going to have all the bells & whistles that the current versions have. Just as long as you understand what you're getting.
Creative Suite 6
Nancy O.

Upgrade Oracle database 10.2.1.0 to 11gR2 without upgrading APEX

Hi,
How can we upgrade Oracle database 10.2.1.0 to 11gR2 without upgrading APEX? We currently have APEX 3.0 running in our 10g databases and don't want these APEX schemas to be upgraded to APEX 3.2.x during the database upgrade. We'll want to test everything before upgrading these APEX schemas manually to 4.1.1 later.
Thanks.
Andy

Pretty sure running the 11gR2 catalog upgrade won't touch your apex. Can't speak for using the upgrade utility, never used it.
Windows? Or *nix hosts? On windows fixing the oradim setups are more of challenge.

Upgrade from CRM2007 (6.0) to CRM 7.0

Hi community,
we are working on an upgrade from 6.0 to 7.0.
After checking modifications with TA SPAU, I'm checking our adaption in the WebUI.
Extending a WD Component with the workbench means, that a Z class is generated which inherits from the SAP standard class, then you can redefine the methods you need to adapt! Mostly we copied standard method and added our coding!
This means after upgrade I have to check all these redefined methods, because the overtaken SAP standard coding could probaby have changed due upgrade.
When I check table BSPWD_CMP_C_REPL I see that we habe about 90 classes which inherit from a SAP standard class.
So I think I have to check each reimplemtated method if the adapted coding is now different to standard method implementation?
Am I right with my suggestions?
I didn't start yet, because I'm still in hope that there's a transaction / programm supporting this job?
regards
Markus

Hi Markus,
Things that are available in 7.0 may have been made available in 6.0 through custom enhancements. You should therefore validate each and every implementation to see if the requested functionality is still necessary. This makes sure you're not poluting the system with unnecessary enhancements. This is not a process you'd want to automate in my opinion. It requires a person (or 2) with
1) good knowledge of the framework
2) the enhancements brought in 7.0
3) the functionality as requested by the business
Hope this helps you!
Cheers, Roel

Upgrade from SCCM 2012 SP1 CU4 to R2 Fails - Unsupported Upgrade Path

Hi everybody,
I'm currently upgrading our SCCM infrastructure to SCCM 2012 R2 after have finished with the upgrade from SCCM 2012 RTM to SP1 CU4, thus far everything works fine, but when I try to update any
of the site servers, whether CAS or Primary, I'm getting the following error message in the Prerequisites Check:
I've gone through the system requirements and prerequisites over and over again and I can assure you that every possible update, supported OS, feature set, SQL Server, check list, etc,
etc, have been followed as per the official documentation available, however I'm stuck in this point, and surely enough I haven't been able to find out a similar case.Additionally I'm adding
the ConfigMgrPrereq log (the relevant portion of it) in case someone could kindly take a look at it.
<04-25-2014 02:06:46> ******* Start Prerequisite checking. *******
<04-25-2014 02:06:47> ********************************************
<04-25-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade,
minimum supported installed build version is [7804].
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Unsupported upgrade path;    Error;
Configuration Manager has detected that one or more sites in the hierarchy are installed with a version of Configuration Manager that is not supported for upgrade.
<04-25-2014 02:07:00> INFO: This rule only apply to primary site, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Active Replica MP;    Passed
<04-25-2014 02:07:00> INFO: This rule only applies to primary or secondary site in hierarchy, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Parent site replication status;    Passed
<04-25-2014 02:07:00> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:00> ===== INFO: Prerequisite Type & Server: SQL:INFPROSCCMCDB.usersad.everis.int
=====
<04-25-2014 02:07:00> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;
SQL Server sysadmin rights;    Passed
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;    SQL Server sysadmin rights
for reference site;    Passed
<04-25-2014 02:07:00> INFO: CheckLocalSys is Admin of <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Site server computer account administrative rights;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server security mode;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: OS version:601, ServicePack:1.
<04-25-2014 02:07:09> INFO: Target computer is a Windows server.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Unsupported site server operating system version for Setup;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Domain membership;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Pending system restart;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: Return code:0, Major:10, Minor:50, BuildNum:4000
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server version;    Passed
<04-25-2014 02:07:09> INFO: Get Sql edition:Enterprise Edition.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Edition;    Passed
<04-25-2014 02:07:09> INFO: Checking Tcp is enabled to Static port, SQL Server:INFPROSCCMCDB.usersad.everis.int,
Instance:.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Tcp Port;    Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is limited.
<04-25-2014 02:07:09> INFO: SQL Server memory is limited.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Configuration for SQL Server memory usage;    Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<04-25-2014 02:07:09> INFO: Installing the central administration site or primary site, requires SQL
Server to reserve a minimum of 8 gigabytes (GB) of memory.
<04-25-2014 02:07:09> WARN: SQL Server minimum memory is 8000 MB.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;    SQL Server process memory allocation;
Warning;    Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by
using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio. For more information about how to set a fixed amount of memory, see
http://go.microsoft.com/fwlink/p/?LinkId=233759.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Case-insensitive collation on SQL Server;    Passed
<04-25-2014 02:07:09> INFO: Check Machine FQDN: <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFO: getaddrinfo returned success.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Validate FQDN of SQL Server Computer;    Passed
<04-25-2014 02:07:09> INFO:CheckSupportedFQDNFormat <INFPROSCCMCDB.usersad.everis.int>
<04-25-2014 02:07:09> INFO: NetBIOS <INFPROSCCMCDB>
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Primary FQDN;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:09> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:09> ===== INFO: Prerequisite Type & Server: SDK:INFPROSCCMCMS.usersad.everis.int
=====
<04-25-2014 02:07:09> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:09> INFO: The rule 'Administrative rights on site system' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: The rule 'Unsupported site server operating system version for Setup' has
been run on server 'INFPROSCCMCMS.usersad.everis.int', skipped.
<04-25-2014 02:07:09> INFO: The rule 'Domain membership' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> INFO: Windows Cluster not found on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Failover Cluster;    Passed
<04-25-2014 02:07:10> INFO: The rule 'Pending system restart' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:10> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Deployment Tools installed;    Passed
<04-25-2014 02:07:10> INFO: CheckAdkWinPeInstalled on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;    Windows Preinstallation Environment
installed;    Passed
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
SMS Provider machine has same domain as site server;    Passed
<04-25-2014 02:07:10> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:10> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:10> ***************************************************
<04-25-2014 02:07:10> ******* Prerequisite checking is completed. *******
<04-25-2014 02:07:10> ******************************************<04-25-2014 02:07:10> INFO: Updating
Prerequisite checking result into the registry
<04-25-2014 02:07:10> INFO: Connecting to INFPROSCCMCMS.usersad.everis.int registry
<04-25-2014 02:07:10> INFO: Setting registry values
If you wonder whether it might be related to this error:
-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade, minimum supported installed build version is [7804].
I confirm that this one site is a secondary one that's attached to a primary site and this log is from the CAS server, I managed to tall it and delete it from that site, but still appears listed
on the CAS management console, any idea how to force the removal of a secondary site that's attached to a primary from the CAS site when it has been removed already from said primary?
I've already tried the
Preinst /DELSITE XXX command but it only works when the site to remove it's attached to the local site and certainly not from a CAS
Finally, the version, build number and everything is correct, no idea what could be the problem, does anybody know a way to bypass this or force the re-evaluation of this rules, I've got
the impression that it's being cached somehow.
Any help would be highly appreciated,
Thank you.
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Hello again everybody,
I've finally managed to fix this up, in the end I had to delete those entries manually from the database as Garry suggested. After this was done the upgrade has gone through as expected with no further ado and has finalized already, now moving on to the
primary sites.
If anybody out there is facing the same issue, what I did was to delete those "stubborn" records executing the following statements over the CAS database:
DELETE
FROMServerDataWHERESiteCode='XXX'
DELETE
FROMSC_SiteDefinitionWHERESiteCode='XXX'
And this is pretty much about it. I'd recommend to take a proper backup first though as best practice.
Thank you all anyways for your answers and comments,
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

R/3 upgrade from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0

Is there a reason to upgrade Solution Manager from 3.2 to 4.0 when upgrading R/3 from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0?
And when in current situation Unicode UTF8 is used, could that give problems during / after the upgrade?

Hello ALex,
There is not a must to upgrade also your solman 3.2 when you upgrade your satellites, only consider if you need the solman diagnostic or not and also that the new functionality in solman 4.0.
Which system is unicode, the satellite?
There is also not problems having a non-unicode solman with unicode satellites and the other, having a unicode-solman "linked" to unicode-satellites.
Hope this helps,
Dolores

ACS upgrade from 4.0.x to 4.1.x "Appliance upgrade in progress"

Hello friends,
We are in the process of upgrading ACS 4.0 to 4.1 in a SE appliance 1113.
We followed very carefuly the steps, and upgraded de Appliance management ACS 4.1. The second upgrade (Software for appliance 4.1) keeps showing "Appliance upgrade in progress..." (near 2 hours by now). I know that it can stick even finishing, but it seems it has not finished because we can not log in with the GUI Administrator account like we did when upgrading the management software (previous step).
Is this normal? what can be missing?, I attach the console text output below (IP adds obscured).
Note the management upgrade went fine.
Thanks.
Cisco Secure ACS: 4.1.1.23
ACS 4.0.1.49-CSAdmin-CSCsd96293_CSCse26719 Fix: (Patch: 4.0.1.49 Tue 01/09/2007
7:50:00.17)
Appliance Management Software: 4.1.1.23
Appliance Base Image: 4.0.1.2
CSA build 4.0.1.543.2: (Patch: 4_0_1_543)
Appliance upgrade in progress...
Session Timeout: 10
Last Reboot Time: Fri Jun 06 11:46:40 2008
Current Date & Time: 6/6/2008 13:17:40
Time Zone: (GMT-05:00) Bogota, Lima, Quito
NTP Server(s): 131.107.1.10
CPU Load Free Disk Free Physical Memory
0.00% 16.9 GB 765 MB
Appliance IP Configuration
DHCP Enabled. . . . . . . . . . .: No
IP Address. . . . . . . . . . . .: 172.16.x.y
Subnet Mask . . . . . . . . . . .: 255.255.255.0
Default Gateway . . . . . . . . .: 172.6.x2.y2
DNS Servers . . . . . . . . . . .: 172.16.x3.y3
CSAdmin running
CSAuth running
CSDbSync running
CSLog running
CSMon running
CSRadius running
CSTacacs running
CSAgent stopped
Appliance upgrade in progress...

Thanks Jagdeep, but the upgrade has not finished.
The documentation mentions (please read it carefully):
"IF YOU COMPLETE THE UPGRADE and the ACS console displays the message Appliance upgrade in progress, this indicates that the upgrade PROGRESS is hanging.
If this condition occurs, start an ACS console session and enter the command download [hostAddress], where hostAddress can be any IP address. This action releases the ACS console from the upgrade process."
What worries me is that it has not finished.
As I said in my post, we can not log in :( (the GUI gets blocked during the upgrade).
I appreciate the help. Many Thanks.

I recently upgraded from Snow Leopard to Mountain Lion. After the upgrade I was unable to log in to my accounts. After days of frustrating procedures (reinstalling, disk utility clean-up, verification, password resets on terminal window...)

I think I isolated the problem to a software issue. I called the software company and they directed me to a website with the following set of instructions:
Website: http://www.thursby.com/after-upgrading-i-cant-login.html
Instructions:
Support
FAQs
ADmtiMac v5 is not supported on OS X 10.7, Lion. If you have already upgraded to Lion, the incompatibility can cause a situation preventing you from logging in to any account. To remedy this situation, please follow these steps:
NOTE: If you do not feel comfortable performing these steps, please contact our Support Specialists for further help.
1. Restart the computer holding down the Command+S keys. This will start the system up in Single User mode.
2. At the prompt type the following commands (these commands will be listed above the prompt just in case you need to reference them):
   /sbin/fsck -fy {hit the return key}
/sbin/mount -uw /   {hit the return key}
3. Modify the /etc/authorization. At the prompt type
   vi /etc/authorization    {return}
This opens the file in the vi editor. Then type:
   /AMHomeDirMechanism   {return}
This searches for the first occurrence of AMHomeDirMechanism (case-sensitivity is important).
do this:
dd     (don't press return, this deletes the line the cursor is on)
n     (don't press return, this searches for the next occurrence of AMHomeDirMechanism)
until there are no more occurrences of AMHomeDirMechanism (vi will say "E486: Pattern not found: AMHomeDirMechanism"). Depending on the version, there will be 3 or 4 occurrences.
Then:
   :wq    {return} (This saves the file).
(NOTE: You may see "E138 Can't write ciminfo file $HOME/.viminfo!". If so, please hit the return key, then continue.)
   exit    {return}
This last line allows the boot to continue, and you should then be able to log in andINSTALL ADmitMac v6.
I did this and it did not work. Redoing this several times over, I noticed that the issue is that Drive is "Read-only". Changing permissions is above my "pay-grade" Any help will be appreciated it. I do not want to wipe out my hard drive and restart anew.

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

Windows 2003 SP2 servers migrating from IIS 6.0 to IIS 7.5 without upgrading to Windows 2008 R2

I have 3 Windows 2003 SP2 servers running IIS 6.0 and my client wants to upgrade to IIS 7.5 without having to upgrade the OS to Windows 2008 R2. Is this possible?
Thanks

No I'm afraid not. The full versions of IIS depend on the OS, so IIS6 on 2003, IIS7 on 2008, IIS7.5 on 2008 R2.
The Express version of IIS can be installed on 2003 but that's for developers only so no use in your situation.
Also worth nothing in terms of upgrading, unless your 2003 installation is 64-bit then you can only do an in place upgrade to 2008 IIS7. There's no 32-bit option with 2008 R2, and no way to do an in place upgrade between 32-bit and 64-bit, so if you really
need to upgrade to IIS 7.5 then your only option would be to start with a new install and then migrate the websites from one server to another.

Can I upgrade from Mountain Lion to Yosemite if I didn't upgrade to Mavericks?

I didn't upgrade to Mavericks. Can I still upgrade to Yosemite from Mountain Lion? If not, where an I get a Mavericks?
Thanks!

Yes.

How do I upgrade from Leopard to Snow Leopard in the attempt to upgrade to Mavericks?

Upgrading to Snow Leopard on my desktop iMac? I eventually want to go up to Mavericks.

Assuming your system is able to run Mavericks, you will need to buy the Snow Leopard upgrade DVD directly from Apple. It is available on their on-line store, for example if you are in the US the link would be:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Once you have SL installed download and install SL Update Combo located at:
http://support.apple.com/kb/dl1399
which will get you to the most current verison of SL. Next run Sotware Update and install recommended updates. Once you have done these steps then you can download Mavericks and install.
Remember if you have any apps that are PPC based they will not run in Mavericks, you will need to upgrade or replace them.
Remember to have a solid backup of your system prior to updating. And it is recommended to have 4GB or more of RAM installed.

I cannot Upgrade from Windows Vista to Windows 7 using Windows Anytime Upgrade

A little while ago I bought an activation and serial key so I could upgrade my Windows Vista to Windows 7
My PC is FULLY compatible and I checked 3 times with Windows 7 Upgrade Advisor ,
I launched Windows Anytime Upgrade and there was no option to upgrade only to go to the website and comapre different versions of Vista
I was a bit fustrated and I have been looking for an answer all afternoon
If someone could help me that would be amazing
System Details
HP Pavillion Slimline
Windows Vista ( 32- Bit )
Dual Core Proccessor
2.5Ghz

What is needed to upgade to Windows 7 is an install disk. You can borrow one or download the one needed, depending on the key purchased. Windows Anytime Upgrade will only upgrade in the product line that is installed. Which version of Windows 7 did you purchase? And do you need/what 32bit or 64bit?
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Upgrade from SCM 5.0 to SCM 7.0 without Java Stack

Hello,
My query is we have a SCM 5.0 system which has a java stack in it. But now we are going to upgrade it to SCM 7.0. - Is SCM 7.0 has a java stack ?
If it doesn't have , can we upgrade SCM 5.0 to SCM 7.0 without Java Stack ? Is it posssible to upgrade without Java Stack or not ?
Is it possible that we can convert Java Stuff into ABAP web dyn pro ? If yes , how shall we can achieve it ? If not, how shall we proceed in an alternate way ?
Thanks for your help in advance.
Madhu

Hi Manoj,
Yes the system is running okay and I can login without problem. The question I have is that the upgrade program started with default system number 00 loaded, where I don't know how to change it to match our system setting. Our system is currently having system number 01.
Thanks,
Eric

Upgrade from CRM 6.0 to CRM 7.0 without upgrading MSA

Similar Messages

Maybe you are looking for