Upgrade from ECC 5.0 to ECC6.0

Hi All,
Can you please explain and list down the differences you observed from SAP ( SAles and Distribution ) point of view , while moving from ECC 5.0 TO ECC 6.0.
Thanks
Umesh S.

Hi,
If you want to compare difference between ECC 5.0 and ECC 6.0 functionally then you can use below link to compare both releases:
http://solutionbrowser.erp.sap.fmpmedia.com/
Thanks
Sunny

Similar Messages

  • Upgrade from ECC 6.0 with no EHP to EHP 7

    Hello,
    We are planning an ERP upgrade from ECC 6.0, which has no enhancement package, to EHP 7.
    Can this upgrade be done :
    1. Directly to EHP7
    OR
    2. Do we need to first upgrade to a lower EHP, for example - to EHP 5 or 6 first, and then to EHP 7?
    Thanks and Regards,
    Reena

    Hi Reena
    Yes, you can upgrade the system to ECC 6 EHP 6 or 7,
    before that is any other SAP system are connected to ECC6 ?
    If it is yes, Kindly refer the SAP Note, & you require to check those SAP version are supported to ECC 6 EHP 7 ?
    1388258 - Version Interoperability within the SAP Business Suite
    BR
    SS

  • Upgrading SAP ECC 5.0 to ECC6  phase GETSYNC_PREUP_FINI_D

    I'm in process of the Upgrading SAP ECC 5.0 to ECC6 And, now it is in upgrade phase GETSYNC_PREUP_FINI_D. But, phase in GETSYNC_PREUP_FINI_D the Upgrade already runs to 24 hours.
    ============================================
    The following START modes are available:
    -  Repeat phase GETSYNC_PREUP_FINI_D to continue
       the upgrade at the point it stopped.
    -  Initialize phase GETSYNC_PREUP_FINI_D to restart
       this phase from the beginning.
    -  Initialize and run another upgrade phase
       (caution, refer to your installation guide).
    -  Exit this program.
    > repeat
    >> 2008/10/22 11:49:04  UPGRADE/SWITCH: START OF PHASE GETSYNC_PREUP_FINI_D
    The parallel running J2EE upgrade needs some more time...
    Please be patient...
    ===============================================
    Database: MSSQL2005
    What could be the problem. I can skip it and go to the next stage???
    Please help me out solution.?
    Regards
    Marcelo P. Silva

    It seems that you have a combined upgrade - ABAP + Java in your system - is that right? If yes, did you start the Java upgrade in parallel?
    Markus

  • Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

    Dear Friends
    We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
    We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
    Could you please help us what needs to be done immediately after upgrade.
    Regards,
    Bharathi

    Dear Nils,
    Thanks for the support.
    Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
    Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
    1. Preparation
    2. Unicode Preconversion Phase in SAP Basis 4.6C
    3. Upgrade Process
    4. Unicode Conversion Phase
    5.  Unicode Conversion Completion Phase
    6. SAP Notes
    Regards,
    Bharathi

  • TP version problem during upgrade from 4.7 sr2 to ECC6

    Hello All,
    i am doing an upgrade from 4.7 to ECC6 (ultimately i have to upgrade to EHP4). I am stuck in phase PREPARE module Initialization finished with status failed #. Below is the error i am getting. before pasting log file i tried my best to uprade TP level by upgrading the Patch level. but its not taking effact in to SAP system. If i check TP version in STMS >> system >> Check TP tool it shows me old version.
    below is the error log excerpt from file CHECKS.LOG
       #====================================================#
    Requests and information for module Initialization #
       #====================================================#
    ERROR:   The upgrade needs a patched version of R3trans which is
             build on 21.06.06 or later.
             The R3trans in your active SAP kernel is either older or
             the version could not be determined. Call it without
             any option to determine the build date.
             If the build date is too old, you have to replace it
             before you can continue the upgrade.
             Download the latest executable available from the SAP service
             market place and update it before you continue.
             Otherwise, the upgrade tools will be corrupted.
    INFO:    The version check of the disp+work in your active SAP kernel
            determined that it has a sufficient level.
             No update of disp+work is necessary.
    ERROR:   The upgrade needs a patched version of tp with version
             number 340.16.05 or higher.
             The tp in your active SAP kernel is either older or the
             version could not be determined. Call it without any option
             to determine the version.
             If the version is too old, you have to replace it before
             you can continue the upgrade.
             Download the latest executable available from the SAP service
             market place and update it before you continue.
             Otherwise, the upgrade tools will be corrupted.
    ERROR: To be able to use ASU Toolbox, your system requires
           the ST-PI software component with at least Support Package Level 8
          After the update is done, the module must be repeated!
           For more information, see the upgrade documentation
    INFO:       The upgrade strategy for the addon ABA_PLUS
                is described in note: 632429
    INFO:       The upgrade strategy for the addon APPINT
                is described in note: 632429
    INFO:       The upgrade strategy for the addon BP-R3PF
                is described in note: 632429
    INFO:       The upgrade strategy for the addon FINBASIS
                is described in note: 438521
    INFO:       The upgrade strategy for the addon LSO
                is described in note: 503468
    INFO:       The upgrade strategy for the addon LSOFE
                is described in note: 503907
    INFO:       The upgrade strategy for the addon PI
                is described in note: 700779
    INFO:       The upgrade strategy for the addon PI_BASIS
                is described in note: 555060
    INFO:       The upgrade strategy for the addon SLL_PI
                is described in note: 1306751
    INFO:       The upgrade strategy for the addon ST-A/PI
                is described in note: 69455
    INFO:       The upgrade strategy for the addon ST-PI
                is described in note: 539977
    INFO:       The upgrade strategy for the addon WP-PI
                is described in note: 632429
       #===========================================================#
    PREPARE module Initialization finished with status failed #
       #===========================================================#
    i downloaded the 47 kernel files SAPEXEDB_304-20001172.SAR and SAPEXE_304-20001172.SAR and installed the kernel file. if i check TP version from command level it shows me 340.16.62, but in SAP STMS it shows me 340.16.03. Can somebody explain what shoulkd i do?
    Can i know also if i can update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started?
    If somebody can tell me the exact number of CDs to use to upgrade from 4.7 SR2 to ECC6 EHp4, that would be very
    nice.
    Mani

    Hi Mani,
    ERROR: The upgrade needs a patched version of R3trans which is
    build on 21.06.06 or later.
    ERROR: The upgrade needs a patched version of tp with version
    number 340.16.05 or higher.
    show that the tp and R3trans used by the source 470 system are old.
    You should download the latest tp and R3trans for kernel 470, and
    replace the old tp and R3trans with the downloaded ones under the 470 kernel directory. The 470 kernel directory is specified by parameter DIR_EXECUTABLE which is usually /usr/sap/<SID>/SYS/exe/run.
    Please note that there is also a kernel directory under /<DIR_PUT>/<SID>/SYS/exe which is for the the target system 700. Please do not replace tp and R3trans under this directory with the ones downloaded for kernel 470.
    NO, you cannot update SAP Kernel from 4.7 sr2 to NW7.0 without upgrading even started. Kernel upgrade will be done by SAPup automatically.
    With Best Regards
    Julia

  • Best Practice in Upgrade from ECC 5.0 to ECC 6.0

    Dear All,
    Can someone help in looking for Best practice in Upgrade from ECC 5.0 To ECC 6.0 Project from Functional FI and CO Side.
    Thanks

    Moved to a different forum.

  • Upgrade from ECC 5.0 to ECC 6.0

    Hello All,
    I am preparing a pre-upgrade assessment for upgrade from ECC 5.0(SCP) to ECC 6.0.. I am suggesting the strategy Combined Upgrade and Unicode Conversion.
    I need a template on how to prepare the pre-upgrade assessment for this upgrade..The template should also contain Impact analysis on the other application like BI 7.0, EP 7.0 and CRM 5.0..
    How do I find out the Impact analysis on the other systems.Please do provide your suggestions on this.
    Thank You,
    Regards
    Thilip Kumar

    Hi Sharad,
    Thanks for your reply..Even I could not find any other added advantage that CUUC startegy can provide for systems with SCP..
    @All- Sorry to ask too many questions in one thread.
    One more question- What is the impact of ECC 6.0 upgrade on
    1) Solution Manager 4.0
    2) BI 7.0
    3) EP 7.0
    4) CRM 4.0
    Any document in SMP which talks about the impact on SAP landscape?I could not find a tailor made documentabout Impact Analysis of ECC 6.0.
    Regards
    Thilip Kumar

  • Advice on upgrade from Ecc 6.0 (No enhancement pack) to EHP 7

    Dear Friends
    Our customer is thinking about upgrading  from  ECC 6.0 (No enhancement)  to EhP 7. Can anybody tell me what are major efforts, steps and approx. time and precautions to consider in this case.
    thanks a lot in advance
    Victor

    Hi,
    SAP Library for SAP ERP on the SAP Help Portal at http://help.sap.com/erp. Choose a
    release and then choose Application Help. In SAP Library, choose Business Functions (SAP
    enhancement package 7 for SAP ERP 6.0) -> Business Functions in SAP ERP -> Enterprise
    Business Functions -> Accounting -> Financial Supply Chain Management -> SAP Treasury
    and Risk Management.
    Hope this helps.
    Regards,
    Jyoti

  • Upgrade from ECC 6.0 to NW 7.10

    Hi,
    I'm trying to plan ahead for our upcoming hardware replacement (3 yr lease). We are also planning for an ECC 6.0 upgrade from 4.7 Enterprise (unicode). I know that the power 6 chip has a built in decimal floating point processing which I believe will be useable with Netweaver 7.10.
    Is the upgrade from ECC 6.0(a NW7.00 product?) to NW 7.10 a full upgrade or is it more like a big hot pack? 
    The reason I'm interested is that I would like to think I could take advantage of the Decimal Floating point processor sooner than later. The other part of the equation is that we have a BI based on NW 7.00 now.
    If I can avoid purchasing another i5OS and paying for a processor activation because there is now a math feature built into the processor , I'm all for it. I would like to start planning now if the upgrade to 7.10  isn't going  to be too painful.

    Hi Craig,
    From what I heard, there would not be another major ECC release in the near future. New functions have been and will be released in "Enhancement packages" - hopefully it is not another new term to you...
    NetWeaver 7.1 has been released (Q3 2007? not Q3 2008 for sure). BI folks might know whether there will be a release 7.1 or not.
    Best regards,
    Victor

  • Upgrade from ECC 5.00 to ECC 6.00

    We are planning upgradation from ECC 5.00 to ECC 6.00. What will be the role of FICO consultant in detail.

    check the customization setting after upgrade
    run a Unit Test and Integration Test.
    run the Report developed

  • Right SAPup version for upgrade from ECC 5.0 to ECC 6.0

    Dear Expert!
    I am upgrading from ECC 5.0 to ECC 6.0 , but i have a erro, with SAPup tool, I don't know to select right SAPup version, please show me about that, thank you very much!
    Tru Hang

    Hi,
    As anil you have to download the Upgrade guide, therer you could see the clear information -about SAPup.
    they have mentioned the issues with SAPup and they have asked us to use new SAPup version due to the issues of Old SAPup version.
    have a look at the below notes
    821032  Corrections for SAPup release 7.00
    1056649  Corrections for SAPup release 7.10
    48184  Upgrade: Stopping a running R3up or SAPup
    1070771  Do not use SAPup version 7.00/2, build 24.094 !
    You can see lots of threads in SDN lot of threads talks about SAPup issues.
    -Srini

  • Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money  for that

    Hi All
         Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.

    hi,
    asking or teling ?
    I think you need not as long as you are with official support . However please contact sap official support in you region

  • Increased number of journal receivers after upgrade from ECC 5.0 to 6.0

    After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan

    After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan

  • SAP Upgrade from ECC 5.0 to ECC 6

    Hello All,
    We are planning for an upgrade from ECC 5 to ECC 6. As some obsolete statements like "Use of header line" is no more supported in ECC 6, do we need to manually change in all custom programs and FMs? Or is there available a tool to do so? or will SAP as part of the upgrade do the necessary. Because this is a huge effort
    Thanks in advance for your response
    Anirban

    Hi,
    It has to be manually done for each and every program.
    Probably your company can check if there are any third party vendor tools that does the conversion, but anyways someone has to manually check the programs and test all of them.
    Regards,
    Subramanian

  • US Payroll upgrading from Ecc 5.0 to Ecc 6.o

    Hi Experts
    My client want to upgrade from Ecc 5.0 to Ecc 6.0 for all modules including US payroll.
    please advise me what are the tables in i need to take care? means i need to have copy for double check?
    Is any tables which was there in Ecc 5.0 and not available in Ecc 6.0?
    I know that we need to have the backup of table T512w and T5uj tables, Apart from these table what other tables i need to check and have backup for double check?
    Thanks in advance
    Regards

    Use following...Good luck...
    Tables:
    T52D2     This table is used to store processing class values
    T512W     In this table, we want to check if someone made changes to the wage types in the SAP name range. We will therefore compare the wage types (only for country code = 10) in the SAP name range (/, M, B*) between two systems.
    T512T     In this table, we want to check if someone made changes to the wage types in the SAP name range. We will therefore compare the wage types (only for country code = 10) in the SAP name range (/, M, B*) between  two systems
    T77S0     For table T77S0, we want to compare the switches that were changed in the SAP name range between  two systems.
    T511K/P     For these tables, we want to check which constants in the SAP name range were changed that may be reset back to standard.
    T591A     For table T591A, we want to check which time constraints and subtypes have been changed, created and deleted
    T52EL/Z     For these tables we want to check if any posting attributes of wage types in the SAP name range have been altered.
    T556U     This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges.
    T52D7     This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges. Customers are supposed to use name range /9** and 1*** - 9***. This table is used to group wage types.
    T54C3     This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges. Customers are supposed to use name range /9** and 1*** - 9***. This table is used cumulate wage types.
    T52OCR     This table is used to store off-cycle reasons.
    Tax Reporter tables     Verify the tax reporter configuration tables to make sure that the standard entries were not changed and overwritten.
    Programs:
    RPUMKG00     Re-generate all features
    RPUBTCU0     Validate BSI connectivity for tax calculation
    RHTTCP77     Table configuration needed for process models
    RHSOBJCH     Table configuration needed for process models
    RPUCT700     Generate all payroll functions and operations
    Arti

Maybe you are looking for

  • Re-create billing without reversing goods issue

    IHi experts, In VOV8 we use both Order related billing & Delivery related billing. We always encounter problem when we need to amend the Condition values in VK12 that system looks for reversing the Goods issue , then can change the price manually or

  • Problem in Service Tax Calculation in PO taxes tab [CIN].

    Dear Experts, For external services procurement, i have configured service pricing procedure for the pricing application - MS. Service basic prices and other pricing stipulations are maintained in Services tab [PO Item Level]. For service tax followi

  • Iphone recycle program

    does anyone know what the verizon or apple does with phones turned in when updating to a new phone? they provide $100 in gift card but what do they do with the phones?

  • Help with Downloading Oracle 9i

    Hello: This is kind of new to me and I am not a computer expert. I am installing Oracle 9i from the CD and here is the message I am getting: "Error in writing to directory c:\Document and Settings\Locals~1\Temp\OraInstall1024. Oracle Universal Instal

  • Data not access

    Dear Team  We are using windows server 2008 R2 enterprise and we stored all our signature data on this server and map to application server  but now we are not able to access that data untill not restart that server .that time we are able to ping or