Upgrade from ECC 6.0 to higher version
Hi friends,
We are interested to upgrade our existing version 6.0 to higher one.
I would like to know where I can get the details with advantage over 6.0
Thanks in advance,
Jayant Joshi
Hi Eduardo
I suggest you to look into the corresponding releasestrategy brochure from http://service.sap.com/releasestrategy (large, middle, small customers).
In the upgrade information center (http://service.sap.com/upgrade), you find (...) and an FAQ Document. This document deals with your release combination (4.6c -> ECC 6.0/higher)
regards
Andreas Rudolph
Edited by: Andreas Rudolph on Sep 14, 2009 10:43 AM
Similar Messages
-
Right SAPup version for upgrade from ECC 5.0 to ECC 6.0
Dear Expert!
I am upgrading from ECC 5.0 to ECC 6.0 , but i have a erro, with SAPup tool, I don't know to select right SAPup version, please show me about that, thank you very much!
Tru HangHi,
As anil you have to download the Upgrade guide, therer you could see the clear information -about SAPup.
they have mentioned the issues with SAPup and they have asked us to use new SAPup version due to the issues of Old SAPup version.
have a look at the below notes
821032 Corrections for SAPup release 7.00
1056649 Corrections for SAPup release 7.10
48184 Upgrade: Stopping a running R3up or SAPup
1070771 Do not use SAPup version 7.00/2, build 24.094 !
You can see lots of threads in SDN lot of threads talks about SAPup issues.
-Srini -
Upgrade from ECC 6.0 with no EHP to EHP 7
Hello,
We are planning an ERP upgrade from ECC 6.0, which has no enhancement package, to EHP 7.
Can this upgrade be done :
1. Directly to EHP7
OR
2. Do we need to first upgrade to a lower EHP, for example - to EHP 5 or 6 first, and then to EHP 7?
Thanks and Regards,
ReenaHi Reena
Yes, you can upgrade the system to ECC 6 EHP 6 or 7,
before that is any other SAP system are connected to ECC6 ?
If it is yes, Kindly refer the SAP Note, & you require to check those SAP version are supported to ECC 6 EHP 7 ?
1388258 - Version Interoperability within the SAP Business Suite
BR
SS -
Increased number of journal receivers after upgrade from ECC 5.0 to 6.0
After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan
After are upgrade from ECC 5.0 to ECC 6.0 on an iSeries machine we have noticed an increase in the number journal receivers being created by SAP approximately twice as many that were being created on are 5.0 system. I've checked all the attributes for the journal receivers and they were set the same on both versions. This hasn't caused use any issues but just wondering if anyone else has experienced this or knows the cause of this. Thanks, Jason Duncan
-
Impacts on MRS and MAM during upgradation from ECC 5.0 to 6.0
Hi Gurus,
I would like to know the impacts on MRS and MAM during the upgradation from ECC 5.0 to 6.0. The version of MRS we are using is MRSS 500, and the version of MAM is 3.0. please let me know your valuable comments.
Thanks in advance.
Regards
SatishHELLO,
Search the form you will get few links.
Also many companies have gone technical upgradation , but not functional upgradation.
Thanks
RK -
How to upgrade from IOS 4.21 to higher
Can anyone help, I need to upgrade my IOS on my IPOD from 4.21 to a higher version, preferrable the most current (IOS 7). I tried syncing to ITunes but there do not seem to be an available update. Is there any other way?
Thanks
RobertI suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists. -
I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!
Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Best Practice in Upgrade from ECC 5.0 to ECC 6.0
Dear All,
Can someone help in looking for Best practice in Upgrade from ECC 5.0 To ECC 6.0 Project from Functional FI and CO Side.
ThanksMoved to a different forum.
-
Upgrade from ECC 5.0 to ECC 6.0
Hello All,
I am preparing a pre-upgrade assessment for upgrade from ECC 5.0(SCP) to ECC 6.0.. I am suggesting the strategy Combined Upgrade and Unicode Conversion.
I need a template on how to prepare the pre-upgrade assessment for this upgrade..The template should also contain Impact analysis on the other application like BI 7.0, EP 7.0 and CRM 5.0..
How do I find out the Impact analysis on the other systems.Please do provide your suggestions on this.
Thank You,
Regards
Thilip KumarHi Sharad,
Thanks for your reply..Even I could not find any other added advantage that CUUC startegy can provide for systems with SCP..
@All- Sorry to ask too many questions in one thread.
One more question- What is the impact of ECC 6.0 upgrade on
1) Solution Manager 4.0
2) BI 7.0
3) EP 7.0
4) CRM 4.0
Any document in SMP which talks about the impact on SAP landscape?I could not find a tailor made documentabout Impact Analysis of ECC 6.0.
Regards
Thilip Kumar -
Advice on upgrade from Ecc 6.0 (No enhancement pack) to EHP 7
Dear Friends
Our customer is thinking about upgrading from ECC 6.0 (No enhancement) to EhP 7. Can anybody tell me what are major efforts, steps and approx. time and precautions to consider in this case.
thanks a lot in advance
VictorHi,
SAP Library for SAP ERP on the SAP Help Portal at http://help.sap.com/erp. Choose a
release and then choose Application Help. In SAP Library, choose Business Functions (SAP
enhancement package 7 for SAP ERP 6.0) -> Business Functions in SAP ERP -> Enterprise
Business Functions -> Accounting -> Financial Supply Chain Management -> SAP Treasury
and Risk Management.
Hope this helps.
Regards,
Jyoti -
Upgrade from ECC 6.0 to NW 7.10
Hi,
I'm trying to plan ahead for our upcoming hardware replacement (3 yr lease). We are also planning for an ECC 6.0 upgrade from 4.7 Enterprise (unicode). I know that the power 6 chip has a built in decimal floating point processing which I believe will be useable with Netweaver 7.10.
Is the upgrade from ECC 6.0(a NW7.00 product?) to NW 7.10 a full upgrade or is it more like a big hot pack?
The reason I'm interested is that I would like to think I could take advantage of the Decimal Floating point processor sooner than later. The other part of the equation is that we have a BI based on NW 7.00 now.
If I can avoid purchasing another i5OS and paying for a processor activation because there is now a math feature built into the processor , I'm all for it. I would like to start planning now if the upgrade to 7.10 isn't going to be too painful.Hi Craig,
From what I heard, there would not be another major ECC release in the near future. New functions have been and will be released in "Enhancement packages" - hopefully it is not another new term to you...
NetWeaver 7.1 has been released (Q3 2007? not Q3 2008 for sure). BI folks might know whether there will be a release 7.1 or not.
Best regards,
Victor -
Upgrade from ECC 5.00 to ECC 6.00
We are planning upgradation from ECC 5.00 to ECC 6.00. What will be the role of FICO consultant in detail.
check the customization setting after upgrade
run a Unit Test and Integration Test.
run the Report developed -
Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money for that
Hi All
Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.hi,
asking or teling ?
I think you need not as long as you are with official support . However please contact sap official support in you region -
SAP Upgrade from ECC 5.0 to ECC 6
Hello All,
We are planning for an upgrade from ECC 5 to ECC 6. As some obsolete statements like "Use of header line" is no more supported in ECC 6, do we need to manually change in all custom programs and FMs? Or is there available a tool to do so? or will SAP as part of the upgrade do the necessary. Because this is a huge effort
Thanks in advance for your response
AnirbanHi,
It has to be manually done for each and every program.
Probably your company can check if there are any third party vendor tools that does the conversion, but anyways someone has to manually check the programs and test all of them.
Regards,
Subramanian -
US Payroll upgrading from Ecc 5.0 to Ecc 6.o
Hi Experts
My client want to upgrade from Ecc 5.0 to Ecc 6.0 for all modules including US payroll.
please advise me what are the tables in i need to take care? means i need to have copy for double check?
Is any tables which was there in Ecc 5.0 and not available in Ecc 6.0?
I know that we need to have the backup of table T512w and T5uj tables, Apart from these table what other tables i need to check and have backup for double check?
Thanks in advance
RegardsUse following...Good luck...
Tables:
T52D2 This table is used to store processing class values
T512W In this table, we want to check if someone made changes to the wage types in the SAP name range. We will therefore compare the wage types (only for country code = 10) in the SAP name range (/, M, B*) between two systems.
T512T In this table, we want to check if someone made changes to the wage types in the SAP name range. We will therefore compare the wage types (only for country code = 10) in the SAP name range (/, M, B*) between two systems
T77S0 For table T77S0, we want to compare the switches that were changed in the SAP name range between two systems.
T511K/P For these tables, we want to check which constants in the SAP name range were changed that may be reset back to standard.
T591A For table T591A, we want to check which time constraints and subtypes have been changed, created and deleted
T52EL/Z For these tables we want to check if any posting attributes of wage types in the SAP name range have been altered.
T556U This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges.
T52D7 This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges. Customers are supposed to use name range /9** and 1*** - 9***. This table is used to group wage types.
T54C3 This table has a delivery class of E which means that SAP and the customer shares this table but with separate name ranges. Customers are supposed to use name range /9** and 1*** - 9***. This table is used cumulate wage types.
T52OCR This table is used to store off-cycle reasons.
Tax Reporter tables Verify the tax reporter configuration tables to make sure that the standard entries were not changed and overwritten.
Programs:
RPUMKG00 Re-generate all features
RPUBTCU0 Validate BSI connectivity for tax calculation
RHTTCP77 Table configuration needed for process models
RHSOBJCH Table configuration needed for process models
RPUCT700 Generate all payroll functions and operations
Arti
Maybe you are looking for
-
I have just purchased an epson xp-415 printer but when I print from ipad or ifone it does not allow me to upsize the photograph to a4 from 10*15. How do i do this?
-
OBI Mobile App Designer raises Internal Server Error
Hi, we are running OBIEE 11.1.1.7.1 on a 64-bit environment including OBI Mobile App Designer. We have the problem that two components (mapviewer and bisearch) are not starting automatically, which might cause the problem that we get a 500 Internal S
-
Multi room dvr not working in other rooms
My mr dvr is not working in any of my other rooms. It has never worked. I just don't have the time to sit on the phone with tech support. I have 3 other sd stb in other rooms and I have programs recorded on the dvr that are not in H. So shouldn't i b
-
Please advise me on external hard drive for PowerBook G4!
Hi, I have a PowerBook G4 12" and I'm constantly getting rid of photos and music as a result of getting the 'startup disk almost full' message. I don't have a large amount of music/photos, so I need a compatible external hard drive with only a reason
-
Logic 8 quits unexpectedly upon opening every time
either opening from a project file or the dock. Just doesn't open at all and I get a message that it has quit unexpectedly. couple notes: - I recently did a software update that included something for Logic - I recently installed new RAM... has been