Upgrade from EP7.0 from SP19 to SP21

Hi All
for compatibility with IE8 we are planning to upgrade our support pack from SP19 to sp21 .
please let me know if there is any documentation available for gap analysis, upgrade steps
regards
Mrigank

Hi Mrigank,
For installation steps, you can download the support package stack guide for SP21 from service market place.
service.sap.com/instguides --> SAP Netweaver --> NW 7.0 (2004s) --> Maintenance --> On the content area Support PAckage Stack Guide.
For GAP analysis you may have to search for SAP notes.
Regards,
Vinod

Similar Messages

Upgrade ESS/MSS EP 6.0 from SP19 to SP21

Hi!
Can anybody give us TIPS to update our ESS/MSS from SP19 to SP21 ??
Do we need to update the business packages, XSS Componenets, ....... ? in other words what do we need to be careful ?
We are working WEB AS 6.4
EP 6.0
SP19
We are planing just to update from SP19 to SP21
Thanks a lot
Xiomara

hi,
wen you have to go for an upgrade,
please go through the stack information(for previous and new).
service.sap.com/sp-stacks -> SAP support packages -> select the sp-stack like SAP ERP 6.0..
click on this, you can get the stack related information for all the dependent components . also, you can get the related notes also.
Regards
Reshma

JMS Receiver FCC Problem After Upgraded from SP19 to SP22 in XI3.0

Hello,
I am facing a problem in my Receiver JMS adapter in FCC just after the upgrading it from SP19 to SP22 in XI 3.0 by our basis consultant. Before that everything was working perfect in DEV.
I am getting the below mentioned error in CC monitoring.
> MP: Exception caught with cause com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.NullPointerException''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.NullPointerException'
This problem is happening in other scenario too in our DEV system.
But at the same time since we have not applied any upgrade in QA therefore same scenario is working fine.
Regards,
Sarvesh

Ok Friends...
I got the solution from SAP.. there was a problem in the SP22 for XI 3.0 which I donloaded from Service Market Place. Now I have applied the correct SP22 to my system and now it is working fine...
I hope this may help you...
Regards,
Sarvesh

ADS Update from SP19 to SP21

Hi!
We are planning to update all our SAP Land Scape.
We are working fine ADS on SP19. Do weI have to do something special in order to continue working as well on SP21 ??
Can anyone give me some advise with this work ??
Netweavwe 2004 SP19
Portal 6.0 SP19
WAS 6.4
Thank you very much for your cooperation

Hi
Check the following note
Note 727168 - Adobe Document Services: Patches
thanks
Gopal

Upgrade from SP11 to SP19

Hi,
We are planning to upgrade from SP11 to SP19. EP system is on UNIX.
And we dont have any KMC for Portal.
Can anyone forward me the documents or step-by-stp guides or links for this?
And i need information what are the advantages with SP19 for portal?
I can say thanks with points.
Here i am adding my mail id: <b>[email protected]</b>
Thanks in Advance,
Sanjeev

All the guides for upgrading to a new support package can be found in the SAP MarketPlace at <a href="http://service.sap.com/nw04maintenance">NW04 Maint</a>.
SP19 will have all the latest bug fixes, which is why you should apply it.
Cheers

Upgrading from EP 6.0 to 7.0

Hi ,
We are upgrading from EP6.0 to 7.0 ,We have many webdynpro applications written in 6.0 now if we upgrade to 7.0 do we have to make any changes to the applications , will the applications run on 7.0 with out any modifications??
Regards,
ravi.

Hai,
Some of the Controls added newly in Webdynpro 2004s. some UI elements like IFrame are depricated, but i seen all of my applications developed in 2004 are working in EP7.0 .
This thread discussing the differences between nw04 and nw04s
NW2004 vs. NW2004s
Regards,
Naga

Upgrading from EP60 to EP70

We are currently using EP 6.0 SP2 Patch 4 and we want to upgrade to EP 7.0. We have very minor customizations (a few iViews and style sheet changes).
Rather than patching our existing portal to the latest EP 6.0 patch level, migrating it to NW2004 and then upgrading to NW2004S, we would simply prefer to create a new EP 7.0 instance and transport our most recent EP 6.0 package to it. We would then manually recreate the custom iViews and any style sheet changes.
Will this work okay? I would appreciate feedback from anyone who has taken this route.
Regards,
Calvin

Hi,
I think it should work. Depending on how complex your security settings are you might also have to export and import these [securiting settings|http://help.sap.com/saphelp_nw70/helpdata/en/d6/7dd241d98eda6fe10000000a1550b0/frameset.htm].
If you are using KM content you will have to transport this as well.
Are you using some kind of SSO (to the backend or to the portal?) Then you will have to recreate the trusts between the systems.
All in all I would recommend to do the upgrade. Especially if you did not modify a lot then the upgrade from EP6 to EP7 works (almost) without problems.
Please let me know if I can help you further on this,
Holger.

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine until I deleted an app in error. When I downloaded it from iTunes, my account is no longer recognized by the app's host servers. Can I go back and re-sync one app from my old phone?

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
Shubhada

SAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH

Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0

Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
Steffan

Public Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
    strFileName = EplanSet!path & EplanSet!File
    If AcroAVDoc.Open(strFileName, vbNull) <> True Then
        Exit Function
    End If
    Set AcroAVDoc = AcroApp.GetActiveDoc
    Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions!

Upgrade from R/3 4.6C to ECC 6.00 : languages

Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French       for component EA-APPL
- French       for component EA-DFPS
- French       for component EA-FINSERV
- French       for component EA-GLTRADE
- French       for component EA-HR
- French       for component EA-IPPE
- French       for component EA-PS
- French       for component EA-RETAIL
- French       for component ECC-DIMP
- French       for component ERECRUIT
- French       for component FI-CA
- French       for component FI-CAX
- French       for component FINBASIS
- French       for component INSURANCE
- French       for component IS-CWM
- French       for component IS-H
- French       for component IS-M
- French       for component IS-OIL
- French       for component IS-PS-CA
- French       for component IS-UT
- French       for component LSOFE
- French       for component PI_BASIS
- French       for component SAP_ABA
- French       for component SAP_AP
- French       for component SAP_APPL
- French       for component SAP_BASIS
- French       for component SAP_BW
- French       for component SAP_HR
- French       for component SEM-BW
- French       for component ST-PI
- Dutch        for component EA-APPL
- Dutch        for component EA-DFPS
- Dutch        for component EA-FINSERV
- Dutch        for component EA-GLTRADE
- Dutch        for component EA-HR
- Dutch        for component EA-IPPE
- Dutch        for component EA-PS
- Dutch        for component EA-RETAIL
- Dutch        for component ECC-DIMP
- Dutch        for component ERECRUIT
- Dutch        for component FI-CA
- Dutch        for component FI-CAX
- Dutch        for component FINBASIS
- Dutch        for component INSURANCE
- Dutch        for component IS-CWM
- Dutch        for component IS-H
- Dutch        for component IS-M
- Dutch        for component IS-OIL
- Dutch        for component IS-PS-CA
- Dutch        for component IS-UT
- Dutch        for component LSOFE
- Dutch        for component PI_BASIS
- Dutch        for component SAP_ABA
- Dutch        for component SAP_AP
- Dutch        for component SAP_APPL
- Dutch        for component SAP_BASIS
- Dutch        for component SAP_BW
- Dutch        for component SAP_HR
- Dutch        for component SEM-BW
- Dutch        for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancel

Hi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel

Upgrade from EP7.0 from SP19 to SP21

Similar Messages

Maybe you are looking for