Upgrade from Final Cut Express to Final Cut Pro

Is there an upgrade path from Final Cut Express to Final Cut Pro?

Why do you want to upgrade?
Are there some features you particularly need?

Similar Messages

  • Upgrade from Final Cut Express to Pro 5.0

    I think I made a stupid mistake. I purchased Final Cut Pro 5.0 upgrade thinking I could upgrade from Final Cut Express. But when I am asked to enter the previous versions serial number, it does not accept it. Is there any way to do this or am I going to have to buy the full version of Final Cut Pro?
    Also, I have a G4 Powerbook with the following specs. Is it going to run the program if I do finally get it installed?
    CPU Speed: 867 MHz
    L2 Cache (per CPU): 256 KB
    Memory: 640 MB
    Bus Speed: 133 MHz
    NVIDIA GeForce4 MX

    To upgrade from FCE you need the Final Cut Pro 5 Upgrade from Final Cut Express. I just upgraded FCE and that worked fine for me.
    Hope this helps answer your question...

  • How can I upgrade from Final Cut Pro X 10.0.4  to 10.0.7

    I need to upgrade from Final Cut Pro X 10.0.4 to 10.0.7 but can not find how to do this. Can anybody help?
    Thanks.

         You might do some web searching on "FCPx  torrent ".  I would think that if you have a legitimate copy of FCPx there would be no legal/moral issue with pulling down a 10.0.7 version via bittorrent, but I'm not a lawyer. And of course there are other issues relating to such software but as Tom implies, you can't get an older version from Apple so you'll have to find somebody, somewhere with a 10.0.7 copy that you can install.

  • Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?

    Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
    I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?

    Apple's web page has the requirements:
    http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
    The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade.

  • How do I upgrade from Final Cut Pro 4.0 to 4.5

    How do I upgrade from Final Cut Pro 4.0 to 4.5?
    Please Help
    Leo

    Hi
    I got sorted apparently I had a recipt for the orignal 4.5 upgrade and this prevented the software updater looking for Final Cut Pro 4.5
    solution: I opened Library and went to Receipts and found FinalCutProHD4.5.Pkg I deleted this then I went to software update and bingo problem solved?
    thanks anyway
    Leo

  • How do I upgrade from final cut 5.1 to final cut 5.1.4?

    I wanted to upgrade from final cut studio 5.1 to 5.1.4 because it doesn't recognise my camera JVC HD111E or the format I have used 730p 25 frame. 5.1 codecs are extremely limited. However my Mac doesn't see that I need this update when I go to software update. Downloaded it from idisk public folder after advice from apple support but this won't install. Have tried other ways such as buying a Lumiere HD plug in but this doesn't work either. Please help!

    Welcome to the discussions, saiga. From Wales, eh? Lovely country, that.
    You've registered the software, right? And you've not moved any programs or renamed them? Have you tried re-installing FCP?
    Patrick

  • Upgrade from Solaris 11 Express to Solaris 11 Release (11/11); Guide MIA?

    Would there be an easy way to upgrade from Solaris 11 Express to Solaris 11 Release (11/11)? The FAQ for Solaris 11 Release has the following hopeful text:
    Can I upgrade to Oracle Solaris 11 from Oracle Solaris 11 Express or Oracle Solaris 11 Early Adopter?
    Yes. Customers can upgrade to Oracle Solaris 11 by using the package management tools. Refer to the Oracle Solaris 11
    Transition Guide (http://www.oracle.com/pls/topic/lookup?ctx=E23824&id=MF JAI) for more information
    But that link comes up with an error page 404, "topic not found".
    The one transition guide I can find is:
    http://download.oracle.com/docs/cd/E23824_01/html/E21799/index.html
    But that covers Solaris 10 jumpstart, not Solaris 11 Express or Early Adopter.
    The Solaris 11 documentation at:
    http://www.oracle.com/technetwork/server-storage/solaris11/documentation/index.html
    Also seems to mention only Solaris 10, not 11 Express or Early Adopter.
    I have already downloaded the full repo for Solaris 11 Release, and the live installer, but I'm hoping it's something as simple as pointing the ips manager to a new repository, or just loading the full repo I already have as a local source. I would also like to keep the dtrace and sun studio set up I have now in the Express version, without reinstalling them on a new release version on bare metal.
    If it keeps the features of the express version while ironing out a few kinks (gdm authentication bug, etc.), that would rock.
    Many Thanks,
    Gordon

    Alan, Thank You, that worked with no problem at all. 11 Express was already using the correct repository, and only required a pkg command update, then other updates.
    So here's what I'm guessing:
    1. The Oracle Solaris maintained repository for Express and Early Adopter are now the same as Release, but they do require an updated pkg executable and pkg update command.
    2. The second form of the command mentioned in the update guide:
    # pkg set-publisher -g http://pkg.oracle.com/solaris/release
    -G http://internal.co.com/solaris solaris
    is for using a local copy of the repository within our lan or vpn wan.
    3. Updates should be fairly regular now that Solaris 11 is in release version.
    I think the new hash (SHA 256) fried some of our old gdm settings for our users, so we're creating new user accounts, and migrating the older accounts. We don't have too many, so it's not a problem for us. But that brings up another point:
    4. The graphical user manager in Express is now gone, and user and group management are now done with command line interface.
    That's fine with me as well. I always use ssh to connect to the machine and then run the screen command for administration. The graphical user manager was always kludgy in Express, and I couldn't get it to work correctly anyway.
    This is great stuff so far. Well done.
    Gordon

  • Printers not working after upgrading from windows 8 to windows 8.1 pro 64 bit

    did the upgrade from win 8 to win 8.1 pro 64bit.
    Printers were working fine but now are not recongnised and the spooler is not starting.
    I reset the spooler on numerous occasions to no avail and ive downloade the latest drivers for the printer but no luck.
    Please assist asap.
    I have a canon lbp 2900  and a hp officejet 6500

    I cant access any printers, not even the virtual printers.
    What I would do is use ProcMon to find out why that Event entry was written.  Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable.  Since IE9 there have been new .dll  involving printing
    which have not been reflected in any of our repair tools.  However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
    unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
    and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
    Robert Aldwinckle

  • Can't upgrade from Acrobat X Std to Acrobat X pro

    Hello,
    I have Acrobat X std I purchased and d/l without problem months ago.  Today tried to upgrade from Acrobat X standard to Acrobat X Pro.  All seemed well until I ran the installation after downloading the files using the download assistant.  The installer window shows Acrobat X Standard in the top bar.  It will only accept my old Acrobat X Standard serial number.  It will not accept the new activation key or serial number.  I have completely uninstalled Acrobat X, gone back to the download area under my orders, and re-downloaded the file.  Same thing happens all over again.  Of course no support or help on weekend and I leave on a trip tomorrow.  Anyone have any ideas?  Thanks in advance.

    OK, I got it loaded.  Not sure exactly, but I believe the tricks were to not use their automatic downloarder, delete it from my computer, to select the "overwrite" option when the manually downloaded installer found the previous files (which I had uninstalled, so not sure what the uninstaller left behind....) then of course once it ran, it prompted me for the Standard serial number, since that had been uninstalled.  Once I put that in, it all seems to work.  Sheesh.

  • How do I upgrade from Adobe XI Standard to Adobe XI Pro?

    I'm trying to upgrade my Standard addition of Acrobat 9 to the Pro version.  can someone tell me how to do this?
    Thanks!

    Hey rachelb79735362,
    Could you please clarify whether you wish to upgrade from Acrobat 9 or from Acrobat XI Std. to Pro version.
    Adobe does not offer upgrade options from Acrobat 9 Std. to Acrobat 9 Pro version.
    Also, with the launch of Acrobat DC version, you can simply upgrade from Acrobat XI Std. to Acrobat DC Pro version.
    Please refer the link mentioned below and upgrade to this new Acrobat DC version:
    http://success.adobe.com/en/na/sem/products/acrobat/acrobat.html?kw=upgrade
    Regards,
    Anubha

  • Installing upgrade from Acrobat XI Standard to Acrobat Xi Pro

    I am trying to install an upgrade from Acrobat 11 Standard to Acrobat 11 Pro.  I have purchased and upgrade license.  When I try to install the Pro upgrade, I get a message that a product with higher functions is already installed and it terminates the install.  Does anyone have any suggestions?

    I would recommend you uninstall Std, run http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over Acrobat folder parts (in Program Files>Adobe), reboot, and install. You will likely have to give the S/N for Std as the qualifying product for XI Pro.

  • After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?

    After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?

    After I upgrade from tiger to snow leopard, my macbook pro more often freezes. Any solution? Do I need to increase memory? If so, how?

  • Final Cut Studio 2: upgrade from Final Cut Express HD

    I'm guessing I know the answer to this question already, but I'm hoping someone will tell me I'm not correct. Is there an upgrade path from Final Cut Express HD 3.5.1 to Final Cut Studio 2? I don't see one listed on the software page in the Apple store. Seems ashame if there isn't. I'm sure there are other FCE HD owners out there who would like to upgrade rather than starting over for the tune of $1299.
    G5   Mac OS X (10.4.9)  

    And it's well worth it. you can recoup a little of
    your cost by uninstalling fce and selling it.
    What's required in order to sell it? Can the registration be transferred to a new owner?

  • Upgrading from Final Cut Express to Final Cut Pro

    I will be purchasing the new FCP version soon, along with the rest of the stuff in the Final Cut Studio package. Is there anything I might wish to save from Final Cut Express?
    Thanks,
    Will

    Though Motion has inherited most of the functionality of LiveType in the latest versions.
    x

  • Upgrading from Final Cut Express and have some questions

    Hi All,
    I just ordered Final Cut Studio, but I am working on a project in FCE right now and I'm wondering if I can just continue it with FCP, or would there be problems with that? I'm too advanced on the video part to just redo it, but I have barely started on the audio part so that one I could start over.
    Also, I'm hoping the software will come with a printed manual, but I'm not holding my breath since the price has recently gone down... in that case, is there a good book on Final Cut Studio that explains how to use the different elements?
    Thanks in advance for any hints.
    Florence

    I MAY HAVE BEEN TOO HASTY IN MY DISMISSAL OF THE FCP 7 "BOOKLET"!
    Last night I had another look at the FCP 7 booklet and have come to the conclusion it is not as useless as I at first thought.
    True, it is very basic and only deals with FCP7 BUT it is surprising how many of the "basics" I have forgotten or never knew.
    After 5 years with the app and having developed my own techniques and (bad) habits, I tend to think I know more about the app than I actually do!
    The booklet is really a mini-tutorial and comes with a very small amount of media you can work with, including a small section on sound editing, which you may or may not already know.
    As mentioned above, it only covers FCP 7, but (depending on your existing level of expertise) I think you may find it a useful read on your train journey to work.
    The booklet, "FCP 7 . . . . . Exploring Final Cut Pro", together with sample video files, can also be downloaded as a PDF from here:-
    http://documentation.apple.com/en/finalcutpro/
    Comprehensive PDF manuals for all the apps can be downloaded as well.
    Message was edited by: Ian R. Brown

Maybe you are looking for

  • Font type of screen field

    Hi experts              I added a new field to the screen but the font type of this field label is different from the font type of other field labels which are created by SAP.please tell me how to change my field label font. Thanks Regards Giri.

  • Does any 3.5mm headphone. Or2.5mm works on iphone?

    Hello Does any headphone work on iphone? And what headphone ineed 3.5mm or 2.5mm

  • Help! My ipad is disabled permanently (password problems) what can I do??

    So I came home, reached out to my iPad, just to find these words: "iPad is disabled; connect to iTunes" .... This is probably because a younger family member was fiddling with the password. ...Where do I go to fix this??

  • Post upgrade/new Mac, can't open 08 site in iWeb 09 :(

    So it's been a while and I'm finally getting back to my web page. In the interim I've got a new Macbook, on Leopard and iWeb 09 now. Trying to open the groundwork I did and of course getting no joy, appears I don't have the .sites2 file. Didn't know

  • Cannot detect Mighty mouse after waken from Sleep

    If i wake my book from sleep, the bluetooth app will not be able to detect the might mouse. And I also cannot switch off the blue tooth app at that time. I was trying to restart the bluetooth assistant but it fails. Any of you has such problem ?