Upgrade from M58p to M90p - without reinstalling Windows? sysprep?

Hi,
I have a M58p which currently has Windows 8.1 installed. I have the opportunity to upgrade to a M90p but I dont wish to go through the hassle of re-installing Windows and Office plus other applications.
I have read on a few sites that I may be able to just take the HDD from one PC and plug into another and Windows will most likely install the new drivers and work away. A few have mentioned running "sysprep /generalize / shutdown" to reset the installation to a vanilla i.e. remove drivers etc before making the move.
Has anyone here done something similar to the above and did it go OK? Any issues worth noting? Does the sysprep help?
Thanks in advance for any replies.

Update just in case it helps others.
I tried sysprep /generalise /shutdown which started the sysprep tool but it reported after while that it could not complete the process and aborted.
I decided to shutdown and proceed regardless.
Swapped the HDD from the M58p to the M90p and it several minutes to complete the boot up and initialisation process before I got the Windows login screen.
Logged in and everything seemed ok - all drivers were installed correctly etc and pc has been running fine.
So, it looks like Windows 8.1 is pretty good at updating drivers etc after a motherboard upgrade - assuming not too much changes between the motherboards.

Similar Messages

Is there a way to upgrade from leopard to lion without buying snow leopard? Will there be a DVD or a bundle for that case?

I know you have to have snow leopard to download lion via app store. But isn't there a possibilty to buy a bundle or any other way of upgrading without paying double price? So far I can't find any information on the Apple website except you have to have Snow Leopard. I know this implies you gotta get snow leopard. Just wondering if I have to pay the full price.

There is a way but it's unlawful (Violates Apple EUA) - I did post a link in here but Apple deleted it ( To be fair the link did expound some convoluted set of circumstances under which it would be legal, but in reality it was a hack so fair play)
I have read that some "helpful" Apple Store will let you borrow a SL copy but I doubt if that's widespread.
The way to look at it is that Lion is priced as an upgrade from SL - not as a base product, which is why the $29 (or equiv) is actually pretty fair.
Regards,
Shawn

Is it possible any longer to upgrade from LR3 to LR5 without subscribing to Creative Cloud?

Is it possible any longer to upgrade from LR3.5 to LR5 without subscribing to Creative Cloud? I am not interested in a CC sub at this time.

You can click Buy on this page to purchase LR5 without subscribing:
http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html
First, though, download and install LR 5.6 from the Adobe Updates page and make sure LR5 will run on your computer:
http://www.adobe.com/downloads/updates

Will upgrading from Lion to Mountain Lion delete my Windows partition (bootcamp)?

On my other computer I upgraded from Snow Leopard to Mountain Lion, and the windows vista partition was completely deleted. I was wondering if I upgrade from Lion to Mountain Lion on my other mac with Windows 7 will it be affected, or in other words, is Mountain Lion Bootcamp compatable with WIndows 7. Should I save it to an external hard drive?
Thanks!

No OS X installer deletes a Windows partition automatically. There is no reason for a Mountain Lion installer to do so when upgrading from Lion.
Nevertheless, having backups is always a good idea no matter what. If you don't have them, then this is a good time for them.

Hi can you please advise how I can upgrade from cs5 to cs6 without monthly annual payments or this cloud stuff

Any assistance would be appreciated been trolling the net for ages no success.

I apologise, I had overlooked that; it should be possible, though.
Quote from
FAQ | Adobe Creative Suite
Owners of a CS5 or CS5.5 suite edition qualify for upgrade pricing to a CS6 suite edition. Owners of an individual CS5 or CS5.5 product qualify for upgrade pricing on that CS6 product. Any version earlier than CS5 will not be eligible for upgrade pricing.

How I can upgrade from Office2010SP1 to Office2010SP2 without MSO Cache?

hello,
I am planning to upgrade Office2010 SP2, however, clients do not have MSO Cache of Office2010.
Enviroment; Windows7 SP1, Office 2010 SP1/ clients - 1000over
I tried below;
* download full package of SP2 and installed using shutdown script - failed
* copy and placed MSO Cache files - failed
* WSUS deplyment - failed
We have over 1000 clients, so it is not possible to re-install Office2010.
Please tell me how we can upgrade it.

For how to deploy software updates using the Updates folder, you can refer to this blog post:
http://blogs.technet.com/b/office_resource_kit/archive/2011/05/05/using-the-updates-folder-to-deploy-software-updates-with-an-office-2010-installation.aspx
Have you fully updated before installing SP2? What's the version number of your existing Office installation?
We do have some cases that even we get the MSOCache files back using installation media, it may sometimes not work with Office 2010 SP2:
http://www.sevenforums.com/microsoft-office/298855-service-pack-2-kb2687455-will-not-install.html
(Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.)
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How can I persuade Acrobat 8.0 Pro to upgrade from cold comfort CS2 without Acrobat 7.0?

I have a Student version of CS2 Premium (including Acrobat 7.0 pro), included in the package was an upgrade version of Acrobat 8.0 Pro.
It worked well all those years on my XP. Now I had to change my system and installed Win 7. Found out that my CS2 was no longer on (de- and re-)activation terms, so I downloaded CS 2 here and read here thoroughly about the problems of my fellow sufferers before I started unpacking and installing, and I must say, the discussions here helped me a lot to avoid tricky traps and I have at least achieved to install the for my work most important parts of CS2 properly, i.e. Indesign and Photoshop. (The most important trick is to start all the 4 exes in an interval of one minute so that they lie all neatly unpacked in the target folder before or short after the first exe to unpack which is oddly No.2 has done it's unpacking and instantly following installation job, and the show can go on.)
Quite oddly, Illustrator refuses to be installed. It says "Falsches BS oder BS-Version für die Anwednung" (wrong BS or BS-Version for the application. I quoted it in German because I don't know if BS is the same term in English). But that is a minor problem, like the one with GoLive which was not even in the bundle. I downloaded it separately and tried to install it but it gives the same mistake massage. Maybe there is somebody enlightened who reads this and would like to give me a hint?
Here is what is really annoying: Acrobat 7.0 Pro was not in the download bundle because, as it has been discussed here at length, the Premium version seems not to be available. I downloaded it separately and installed it and all worked well so far.
That was the moment when I thought that I could install my upgrade version of Acrobat 8.0 on top of it. Acrobat accepted the serial no. and started to install but gave a warning that I should better uninstall 7.0 because I risked technical problems if not. I risked to not uninstall because I needed it as a proof for the upgrade license, didn't I?
But at the very end of the installation, there WAS a technical problem, a tiny black screen with a white message which I could not read so fast, and Acrobat 8.0 undid it's whole installation. I uninstalled 7.0 too, restarted the system, and got a blue screen. This whole encounter had somehow interfered with my printer's driver and maybe my GeForce driver. That was the day's smallest problem and could be fixed.
Well, leaving 7.0 uninstalled, I tried to install Acrobat 8.0 Pro again, and this time, it refused to continue after having read my serial number, because of course I had no installed proof for my license to upgrade. So it's either crash or refuse, a real unmerry-go-round dilemma, like having the cake and eat it.
Formerly, this problem did not exist because Acrobat 7.0 belonged to the bunch and could be uninstalled whithout my losing the license to upgrade because there was still the rest of the CS2 family waving the flags.
Surely, there must be a workaround here - is it possible to half uninstall Acrobat 7.0, maybe by fiddling something in the registry (I know how to save it before!) or just kicking the uncouth drivers out? But where are they hidden and what are their names? The replacement serial number given on the download side would be accepted, as we have seen.
I really do hope that one of you has already found a solution to that problem, too.
I hope I have mentioned everything necessary and there are no questions left. Thank you for your patience.
Saskia
P.S. For my biggest problem, I have been given a fine solution by the support after a long chat. After some unavailing trials to unlock the serial number they created a new SN for my Acrobat 8, and now it works fine and I am the happiest girl of the day. The first (minor) problem still remains. I have an idea and wanted to ask if you specialists think it could work. As I never made any use of version cue, maybe I don't need to install the applications as a suite. Trying to install one of the bundle as a separate application did not work, but maybe this was because of the existence of CS2? Would it help if I'd uninstall CS2 and install each application separately?
Message was edited by: missis11

BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
Mylenium

I have an older MacBook Intel 2 Duo processor 2.4Gh 4GB mem running 10.6.8. Yahoo just informed me I must upgrade my Safari (5.1.10). How much can I upgrade from 10.6.8 without degrading performance?

I have and older MacBook Intel 2 Duo processor 2.4 Ghz, 4GB mem, running 10.6.8 and Safari 5.1.10. Yahoo has just informed me that they will no longer support Safari 5.1.10 and my question is how much higher than 10.6.8 can I go to get a better Safari before I start reducing performance on an older computer? It is about 6 years old but runs fine for my purposes.

If you want to stay with 10.6, try Firefox which is still being updated.
Firefox
Check that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.
Mountain Lion
If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion                       Lion

¿Is it possible to upgrade from SCCM 2012 a domain controller in Windows Server 2008 R2 TO 2012 R2?

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.

Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Switching from IDE to AHCI without re-installing (Windows 7 and 2003)

Hi,
I had posted about how I had switched Windows 7 64-bit on my 880GM-E43 earlier on this earlier thread:
https://forum-en.msi.com/index.php?topic=148522.0
and mentioned that I also wanted to get Windows 2003 (32-bit) switched on this same mobo (I dual boot).
I just found this last night:
http://www.wikihow.com/Enable-Raid-or-Ahci-Without-Reinstalling-Windows-for-Amd-Sb850-(Possibly-Sb8Xx)-Controllers
and got it working.
I posted a comment under the comments for that wiki with my .reg, but it hasn't appeared yet, so here it is:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\CriticalDeviceDatabase\pci#ven_1002&dev_4391&cc_0106]
"ClassGUID"="{4d36e97b-e325-11ce-bfc1-08002be10318}"
"Service"="ahcix86"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86]
"Type"=dword:00000001
"Start"=dword:00000000
"ErrorControl"=dword:00000001
"Tag"=dword:00000001
"ImagePath"="system32\\drivers\\ahcix86.sys"
"Group"="SCSI Storport"
"DisplayName"="AMD AHCI Compatible RAID Controller"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Parameters]
"BusType"=dword:00000008
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Parameters\PnpInterface]
"5"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Settings]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Settings\CAM]
"EnableALPEDisableHotplug"=dword:00000000
"EnableCCC"=dword:00000000
"CCCTimeoutValue"=dword:0000000a
"CCCCompletionValue"=dword:00000020
"NCQEnableDiskIDBits"=dword:ffffffff
"EnableHIPM"=dword:00000000
"EnableDIPM"=dword:00000000
"EnableHDDParking"=dword:00000001
"CAMTimeOutValue"=dword:00000005
"EnableAN"=dword:00000001
"EnableAPS"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Enum]
"0"="PCI\\VEN_1002&DEV_4391&SUBSYS_75961462\\3&13c0b0c5&0&FA"
"Count"=dword:00000001
"NextInstance"=dword:00000001
I also use the HotSwap! utility to do safely remove drives now:
http://mt-naka.com/hotswap/index_enu.htm
and that works well.
I hope that this helps others!!
Jim

Most curious thing. Arch didn't require any actions from me to succesfully boot into the system after switching to AHCI
# dmesg | grep -i ahci
[ 1.883905] ahci 0000:00:11.0: version 3.0
[ 1.884180] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.884183] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.885364] scsi host0: ahci
[ 1.885508] scsi host1: ahci
[ 1.885640] scsi host2: ahci
[ 1.885772] scsi host3: ahci
[ 1.885903] scsi host4: ahci
[ 1.886033] scsi host5: ahci
Additionally GRUB seems to be sensitive to overclocked systems. I get stuck on Veryfying DMI pool data. GRUB won't start when disk controller is set to IDE. To get GRUB to start I have to:
- enable AHCI (GRUB starts)
- reboot and disable AHCI (GRUB starts)
My OC configs have never caused such behavior when I had only Windows 7 installed.
Last edited by bbarcher (2015-04-19 15:40:39)

Upgrading from 10.5 to 10.6 With Windows

I have a macbook which has leopard installed on it....
I have installed Windows on it using bootcamp!
Now I want to upgrade to Snow Leopard...
Will my Windows installation be intact? I mean will I lose all the files I have on the windows partition?

Your Windows system will be untouched when you upgrade. However, after installing Snow Leopard you may want to upgrade the Boot Camp drivers which are on the Snow Leopard DVD. Simply boot into Windows then insert the Snow Leopard DVD in the optical drive. Just wait as the installer will run automatically.

Can I upgrade from a CS5 Student Edition (PC) to CS6 Mac?

Hi, quick question:
Some time ago I bought CS5 (student edition) for my PC. I've never opened the box, so it's uninstalled.
I'm getting a mac (it arrived today actually) and I'd like to be able to install photoshop on this. Since it's a different platform, can I upgrade from my current version without having to buy the full-priced CS6 for mac?
Basically, could I: install my student edition on my pc, get the student verification code (I'm still a student), and then not just go through the upgrade process to CS6 but also cross platforms from pc to mac?
OR: could I install the pc version, upgrade to CS6 (still pc) then crossgrade that?
Would it be the same cost?
Thanks so much

There are no upgrades for student versions. If you are still eligible you simply buy a new CS6 license for Mac.
Mylenium

Upgrading from Panter 10.3.9 to Tiger - Need Help

I am trying to upgrade from panter to tiger without success. My 12" powerbook G4 meets exceeds the system requirements and I have plenty of HD space, however the installation fails when verifying the destination volume. My friend suggested that I may need a firmware update to update the Bios for successful installation. I am not mac savvy and do not know what needs to be done. Can someone please give me a helping hand. Thanks.....

Here's the only really useful information on this error and what you can do to solve the problem:
How to Deal with a -9972 Error
Contributed by Fumiaki Kawashima
The error message, "Error: The underlying task reported failure on exit (-9972)" is a serious filesystem error in the Mac OS X Core Foundation. The problem can also lead to other critical errors such as "Keys Out of Order," "Invalid node structure" and/or "Invalid sibling link." The causes and scenarios vary. Troubleshooting a solution may depend upon computer configuration and whether the -9972 error is accompanied by other critical errors. This issue can also lead up to a kernel panic. If the error occurs when an external FireWire device is connected, disconnect it until you verify the device's compatibility.
Symptoms:
In most cases, you are unable to restart from Mac OS X.
* A volume is grayed out or not mounted with or without a kernel panic.
* A folder with a flashing question mark may appear.
* A bad partition map may be reported.
* A target disk mode solution may not work.
* Most likely, Disk Utility, Norton Utilities, TechTool and DiskWarrior cannot fix the issues.
* The high level disk format (Standard format) may unable to perform.
* You may unable to re-initialize the hard drive.
* A disk physically malfunctions in the worst case.
Example of an accompanied error message:
DiskWarrior normally fixes 1 to 6, but cannot fix errors 7 to 10 if the symptoms are very bad. There is no definite case.
01. Volume check failed
02. Invalid B-tree Header
03. Invalid map node
04. Invalid extents entry
05. Invalid clump size
06. Incorrect block count file
07. Invalid node structure
08. Overlapped extent allocation
09. Keys Out of Order
10. Invalid sibling link
Related documents:
What to Do When It Finds an Error
Technical overview of disk volume structures
Possible causes:
* Third-party FireWire device or enclosure, or other peripheral devices.
* Third-party mass storage drives or PCI card issues.
* Incompatible third-party kernel extensions.
* Mac OS X installer disc is improperly treated.
Solutions:
If possible and needed, back up data before troubleshooting. Methods (4) and (5) are for Power Mac desktop computers other than G5 models. The best bet is method (4) if you encounter multiple bad errors.
1. Unplug the power cord. Disconnect all third-party hardware except Apple keyboard and mouse before you start.
2. Do NOT re-install any third-party software/hardware until you completely solve the issue(s) and carefully investigate the compatibility with Mac OS X 10.3.x you install.
3. If another critical error "Invalid sibling link" is detected at any phases, disconnect and reconnect all internal power cords and data cables for hard drives and any ATAPI device. To do so, you may need to read the computer's CIP Instructions in advance. Normally, you do not need to remove third-party RAMs.
Method 1:
(1) Start up from Mac OS X 10.3.x Panther Full Install CD or DVD.
(2) Re-initialize and re-partition the hard drive. RECOMMENDATION: Select "Zero all data" option if "Invalid node structure" or "Keys Out of Order" error is detected.
If this method is of avail, go to Method 2 or greater.
Method 2:
(1) Start up in Mac OS 9.2.2 and shut down the computer.
(2) Start up from a copy of a Disk Warrior bootable CD for Mac OS 9.2.2.
(3) Run DW to fix the damage(s).
Method 3:
(1) Unplug the computer.
(2) Find a second ATA drive and jumper it as MASTER. Jumper the hard drive in question as SLAVE. Verify the jumper pin settings.
(3) Install Mac OS 9.2.x system on the MASTER drive, and update it to Mac OS 9.2.2.
(4) Start up from Mac OS 9.2.2. Re-initialize and re-partition the damaged hard drive with Drive Setup using the "Zero all data" option. Unplug the computer and reconfigure the jumper pin setting on the repaired drive for MASTER and the second drive for SLAVE.
(5) Restart from Mac OS X 10.3 Panther full install CD. Re-initialize and re-partition the repaired drive to install Mac OS X 10.3. Update to Mac OS X 10.3.7 via Software Update. Repair the disk permissions after each Mac OS X 10.3 installation and Mac OS X 10.3.7 update.
You may want to try starting up from Mac OS 9.2.x Full Install CD instead of from (2) to (4).
Method 4:
(1) Find a desktop computer that has an ATA controller PCI card (SCSI environment) and has two hard drive bays. This will make your damaged drive appear as a quasi-SCSI hard drive. Mac OS 9.2.2 must be pre-installed on the computer. I recommend a host computer that installs an Ultra DMA/xxx or xxx (ATA-x) interface equal to or better than the damaged drive with backwards compatible.
(2) Set the host computer's primary drive as MASTER and your damaged hard drive as SLAVE and install the damaged drive in the second drive bay of the host computer. Verify properly configured jumper pin settings in advance.
(3) Start up the host computer from Mac OS 9.2.2. Launch the "Drive Setup" utility. Re-initialize the damaged disk on the second drive using the "Low level format" option. It may take hours but less than "Zero all data" option. Note: Normally, a low level format with a quasi-SCSI drive takes much less (30 - 40%) time than an ATA configuration drive. Note that "Low level format" fixes all difficult logical damage.
(4) Put the fixed disk back in your computer's drive bay. Re-configure the jumper pin setting to MASTER before you place it into the drive bay of your computer.
(5) Restart from Mac OS X 10.3 Panther full install CD. Re-initialize and re-partition it to install Mac OS X 10.3. Update to Mac OS X 10.3.7 via Software Update. Repair the disk permissions after each Mac OS X 10.3 installation and Mac OS X 10.3.7 update.
Note that Panther's Disk Utility does not implement a "Low level format" option.
Method 5:
If Method 4 does not work or fix the damaged drive, let me know. You may need an advanced technique to fix it if the drive is physically not a problem.
OPTION:
Purchase a known good hard drive that conforms to your computer's ATA specification. Fix the damaged hard drive some other time. Nowadays, prices of hard drives are inexpensive.
Mac Pro 2.66 Ghz; MacBook Pro C2D 2.33 Ghz; MacBook Pro 2.16 Ghz Mac OS X (10.4.8) Intel iMac C2D 17 "; iBook G3 800 Mhz; 30 GB iPod Video (Black); iPod Nano 2 GB

Where to buy the upgrade from Lr5 to Lr6 - not interested in "Cloud"

How can I find the upgrade from Lr5 to Lr6 without any CC, "Cloud". thx

Hello,
da Du in einem deutschen Forum postest hier meine Antwort per Link auf eine deutschsprachige Webseite (aber sicherlich nachvollziehbar):
http://www.cremerseele.de/adobe-lightroom-6-upgrade-niemand-soll-es-finden/
Good luck!
Hans-Günter

Upgrade from Palm Vx

I want to upgrade from my Palm Vx without losing stored data on my computer, Windows XP. Any suggestions? Have been have problems with the Vx, and have to do a hard reset too often.
Post relates to: Palm Vx

1. Dottie, plug in your TX to the charging cable and let it charge for 3 hours. DO NOT connect it to your computer.
2. Install Palm Desktop from the CD. It won't erase your old data.
3. Follow Palm's Guide to Updating and rename your /Backup folder in your Palm directory. (How to Upgrade from a Previous Palm device to a Newer One: http://kb.palm.com/ and enter 12926 (General Upgrade guide).
4. The line about syncing with Outlook is an option presented to you. Do you sync your Vx to Microsoft Outlook? If not, this doesn't apply to you.
5. Connect your Hotsync cable to your computer and perform a Hotsync. Choose your old username when asked what User Account to use. (Be sure you've renamed your /Backup folder!)
6. All your PIM data should appear, but no third-party software or old Vx system files that could scramble the TX.
7. Enjoy!
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Upgrade from M58p to M90p - without reinstalli​ng Windows? sysprep?

Similar Messages

Maybe you are looking for

Upgrade from M58p to M90p - without reinstalling Windows? sysprep?