Upgrade from N95 to N95 8GB not enough memory

I have just upgraded from the standard N95 to the N95 8GB, I did the back up from the old phone however when restoring the files to the new handset it has completely filled the phone memory. There does not seem to be any management of the memory (aka sim/phone of old) I cant see how to make it use the larger mass memory rather than the phone.
Having the phone memory full renders it unable to do anything, like set up a mailbox or choose a ringtone.
Any ideas....

Similar Messages

N81 8gb Not enough memory available

Hello, today I installed n-gage first access >_
using Nseries pc suite, and choose memory card (8gb) as place for install
then I did this:
"7. Start the N-Gage application on your device by clicking the N-Gage icon in the Applications Folder.
8. Now you are ready to install the games. Double-click the N-Gage game file (the .n-gage file) on your PC, and follow the on-screen instructions.
9. The on-screen instructions will remind you to have the N-Gage application installed, and prompt you to finish the installation on your device.
10. With the N-Gage application running, install the games to your device's mass memory or memory card."
So why this on-screen INSTRUCTIONS dont suggest to choose a place for install and games didn't install.
"NOTE: If you encounter the error "Application can not be installed to the device. Not enough memory available." during PC Suite installation, this means you do not have enough free device memory to begin with. Please free up enough device memory to proceed"
Before this actions I have more than 10 megabytes of free phone memory, now I have only 8Mb, and there is nothing in my folders of phone memory. I lost 2Mb. AND HOW I CAN FREE PHONE MEMORY?
N81 8GB

I had a few problems installing the games myself, so here's how I solved that:
1. Run PC Suite
2. Choose the application installer
3. Make sure you've selected your memory card from the right list and not the phone's internal memory, then select and install a game
4. Once installed, run the phone's built-in file explorer (I think you'll find it under Tools)
5. Go to your memory card and look inside the n-gage directory
6. The install file for the game which you just transfered should be there - execute it
Message Edited by conradargo on 09-Feb-2008 07:34 PM

Data stream from OEM device, TCP/IP "not enough memory"

Hi Everyone,
I'm trying to catch a data stream from an OEM device over a TCP/IP link. I can start the data stream, or pause/resume it, but the OEM device determines when the data stream has ended. The data stream begins, and within 20 seconds, I get the famed "not enough memory" error. Once this happens, data is lost from the stream, and quite often the final message indicating completion is missed. I see two solutions to this. 1) Watch how many bytes are backed up on my TCP/IP port, and issue a pause command until I can process the backed up bytes at which point a resume will be issued. ...or 2) Use my application's memory usage in the same manner. Does anyone know how to do either of these things?
Thanks much

Hi Toader,
Thanks for your response.
1) I'm not sending any data. I'm trying to consume an incoming data stream which is being driven by an OEM device. This device basically has an FPGA hooked up to a 100Mbit/s hose. You can start it, pause it and resume it. Those are the available operations related to consuming the data stream. I think the crux of the problem is deciding when to pause the OEM device to give the LabView app a chance to process and store the accumulated portion of the data stream.
2) Sure, but it's not my program and is large and complicated. I guess I could write my own program within a program, but I would rather use the existing architecture. I might write my own micro app, but I doubt it will keep up with the FPGA driven hose. If I could detect the condition leading up to the "not enough memory" error, which it seems many LV developers have encountered, but not really solved, then I could issue a pause to the OEM device.
3) Well using a LabView application under a 2Ghz Windows box may not be sufficient hardware. But I really think it's the Windows operating system that I'm having trouble with, not the hardware platform.
I've tried several counters in the LabView application, watched task manager before/during/after the "not enough memory" error, and downloaded an interesting app called taskmanager.vi in an attempt to get something to correlate with the error message. I've not succeeded yet. Here's what I think is happening. The Windows OS is managing my wireless hardware, when it receives a TCP/IP packet, it puts it in the Windows Message que of my LabView application. I think the "not enough memory" error relates to a Windows OS allocation for my message que which is being exceeded. Any Windows programmers out there who would know how to look at the application's message que during runtime?
Thanks for your classic suggestions Toader, I may try a micro app which is spawned by the main app when its time to grab the data. My intuition is that no software limited by the Windows OS is going to keep up with single minded FPGA hardware.
I thought this very interesting discussion was the answer and it may still be, but after trying 30+ various counters under Memory, System, Process, TCP, and Server, none correlated to the error.
http://forums.ni.com/t5/LabVIEW/System-monitor-counter/m-p/1653448/message-uid/1653448/highlight/tru...
I also tried a taskmanager.vi, but none of the various flavors of memory tracked by that little gem correlated with the error either. At this point, I started to wonder "what memory was there not enough of?".
Terry

I can't download any music from itunes, says there is not enough memory to support the download

I can not download any music from itunes, little box pops up and says there is not enough memeory to download?

iCloud storage has absolutely nothing to do with local storage. You need to free up space on the iPad in order to download the movies. You can transfer some content into iTunes and then delete it from the iPad in order to make room on the device.
Settings>General>Usage>Storage is where you delete content if you want to do it in there.

Not Enough Memory or Something Wrong with Printer error

My Epson 820 printer works fine and I can print a nozzel check pattern from the printer utility software. However, I can't print from any of my software. I keep getting the error "Something Wrong with Printer" or from some software I get "Not Enough Memory".
I'm not having any other problems and can do complex graphics in Photoshop without any memory issues. I've checked my printer setup and it clearly sees my printer. My Epson 820 also shows up in the Printing Options dialog box.
Any suggestions?

Thanks for these suggestions. I believe it's my computer. I've started having additional problems. I opened a .pdf in Acrobat Reader and tried to print. After that I couldn't shut down my computer. Alarmed, I connected my firewire backup disk and backed up my hard drive. Then when I tried to eject the external drive, it didn't allow me to disconnect. It reappeared with the disk icon and a second folder labeled as the external drive but showing the drive was empty. I shut down and rebooted; all my files are in tact on the external drive but there's definitely a computer issue here.
Any suggestions how I should proceed?

P800 "Not Enough Memory" error when trying to use Contacts

Now even after I reset my P800 from iSync I get this 'Not enough memory' error when I try to use my contact list.
This is getting really frustrating! I want to downgrade...

I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
Phil

Excel "not enough memory"

I know I have the vast majority of my available space on the computer available (MACBOOKPRO 17). So, why do I get the reply from EXCEL that there's "NOT ENOUGH MEMORY" to download a simple excel spreadsheet?

HI and welcome.....
I get an error message-not enough memory- when trying to open excel.
Open System Profiler (Applications / Utilities). Under Hardware you can see how much RAM (memory is installed)
And make sure there is sufficient space on the startup disk. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
Carolyn

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

You can't. iCloud is not for general file backup from a Mac. It's for backup up and syncing data between mobile devices and and Macs and The following is from this Apple document: iCloud: Backup and restore overview.
iCloud automatically backs up the most important data on your (mobile) device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails
But not from a Mac. If you want to backup your photos and other important files I suggest you get an external hard drive and use it with Time Machine.
OT

CR2008 Not enough memory while exporting reports from Crystal Reports 2008

I have recently upgraded our Crystal Reports version from Crystal Reports Basic for Visual Studio 2008 to Crystal Reports 2008. After upgradation I am facing the problem "Memory full.OtherErrorFailed to export the report. Not enough memory for operation" when I am trying to export the report from Crystal Reports 2008 Report viewer, or directly from the code behind. The application is hosted application. The problem occurs in our production environment.
Server details:
OS: Windows 2003 Enterprise Edition R2 with SP2
IIS: IIS 6
.Net Framework: 3.5
Application details:
Hosted application using Crystal Reports 2008 SP 3
Crystal Reports Viewer version: 12.0.2000.0
The data binding of the report object is done through an ADODB dataset.
Web.Config:
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
    <sectionGroup name="businessObjects">
      <sectionGroup name="crystalReports">
        <section name="printControl" type="System.Configuration.NameValueSectionHandler" />
        <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
      </sectionGroup>
    </sectionGroup>
</configSections>
<businessObjects>
    <crystalReports>
      <printControl>
        <add key="url" value="http://myserver/mysite/PrintControl.cab" />
      </printControl>
      <crystalReportViewer>
        <add key="documentView" value="weblayout" />
      </crystalReportViewer>
    </crystalReports>
</businessObjects>
<appSettings>
    <add key="CrystalImageCleaner-AutoStart" value="true" />
    <add key="CrystalImageCleaner-Sleep" value="60000" />
    <add key="CrystalImageCleaner-Age" value="120000" />
</appSettings>
<system.web>
    <httpHandlers>
      <add path="CrystalImageHandler.aspx" verb="GET" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
    </httpHandlers>
    <compilation debug="false">
      <assemblies>
        <add assembly="CrystalDecisions.Data.AdoDotNetInterop, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304" />
        <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
        <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" />
      </assemblies>
</system.web>
<system.webServer>
     <handlers>
         <add name="CrystalImageHandler.aspx_GET" verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" preCondition="integratedMode" />
     </handlers>
</system.webServer>
</configuration>
Sample Code:
Report = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
Report.Load(Server.MapPath(strReportPath));
Report.SetDataSource(dsReport);
Creportviewer.ReportSource = Report;
For exporting the report to PDF
string Filename = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.InternetCache).ToString(), Guid.NewGuid().ToString() + ".pdf");
Report.ExportToDisk(ExportFormatType.PortableDocFormat, Filename);
Clean Up Code: (Page_UnLoad event)
if (Report != null)
     Report.Close();
     Report.Dispose();
Creportviewer.ReportSource = null;
Creportviewer.Dispose();
dsReport = null;
GC.Collect();
GC.WaitForPendingFinalizers();
Can someone help me resolve the issue.

The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM

There is not enough memory error with 8gb installed

Description:
I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
It reads:
There is not enough memory to complete the operation.
To increase available memory, close other open documents or applications.
But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
Steps already taken:
Tried copying after a system restart with no other programs running.
Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
I reinstalled Flash
I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
Any help would be greatly appreciated!
P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.

Thanks for chiming in Mataxia.
One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this...

Upgraded mac 10.4.11 to snowleopard not enough memory

Hi
Reluctant and to poor to do away with my mac 10.6.8, i gave it all a spring clean, backed up the hard drive onto 'Lacie', then installed Snowleopard. fantastic! my computer working almost like new again. However... i could not install Mavericks - 'not enough memory'.
I can probably find more gunk in the machine (duplicate files etc), buy clean my mac. what else? is there a fixit for a not too geeky mac user?

You need 2 GBs of RAM or more to install Mavericks. It's not just a hard drive concern.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
(125734)

I just upgraded to Yosemite. Now when I try to open Excel, I get a message that there's not enough memory. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. Help please. Thanks

I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie

I just upgraded to Yosemite. Now when I try to open one particular document in Excel, I get a message that there's not enough memory. I can open other documents. The document I can't get to is the spreadsheet of my passwords. Go figure. When I check the storage under "about this Mac" it says I have 150 GB of 249 GB. I have a MacBook Air. Help please. Thanks, Connie

HT4623 Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?

Help updated my ipad with IOS 7.0.4. It asks me what language, chooses my wi-fi and then asks.........1 - set up as a new ipad, 2 - restore from iclouds or 3 - restore from itunes but won't restore as not enough memory! What do I do now?
I don't want to lose all my pics, songs etc
Whats my next move as I CANNOT use the ipas at the moment!!!!!!!!

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

Hello Pushtheriver,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud storage issues:
Get help using iCloud storage
This may also help:
Understanding iOS device capacity
You can sync and download many different types of content on your device. Some types of content (such as music and videos) typically take more space than others (such as notes and books). The amount of space taken by an app depends on the app's purpose; complex or graphically intense apps usually take more space than simpler apps.
If your device is near its capacity, you can remove some of the less used content to make room for more.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Upgrade from N95 to N95 8GB not enough memory

Similar Messages

Maybe you are looking for