Upgrade from NAC release 4.1(3) to release 4.7(1)

Hi All,
We have two CAM and two CAS appliances. Both pair of them are working in High availability mode.
We need to upgrade them from version 4.1(3) to version 4.7(1) so, as i read, we should upgrade them to 4.7(0) first before upgrading to 4.7(1).
Now, i'd like to know how can i upgrade from 4.1(3) to 4.7(0)? Is this done by the same steps of the upgrading from 4.7(0) to 4.7(1) by inserting a CD into the CAS and CAM and then continue the upgrade steps?
Also, I'd like to know if the configuration on the existing version (4.1(3)) will be lost after the upgrade or not?
Thanks in advance.
Regards,
Heba

Heba,
You can go to 4.7.1 by going to 4.5, 4.6, or 4.7 first, so best option for you would be to upgrade to 4.6 or 4.5 (since they don't require a CD install, but just uploading the packages and then doing the upgrade) and then to use the CD to go to 4.7.1
When you boot from the CD after rebooting cleanly (using the shutdown -r now command) you will get an option to upgrade. This option will retain all the settings, so you don't have to start afresh.
Also make sure that the 4.7.1 CD that you burn is done at the slowest possible speed (recommended 4X or 6X), since doing it at a faster speed can result in a corrupted CD and hence a failed upgrade.
G'luck!
Faisal

Similar Messages

Any Proactive measures for 10GR2 when upgrading from W2K3 to W2K3 EE

Current environment
SQL> select banner from v$version;
BANNER
Oracle Database 10g Release 10.2.0.2.0 - Production
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
We are planning an OS upgrade from windows 2003 stand edition to Windows 2003 enterprise edition.
1) From the ORACLE prospective will there be any bottlenecks.
2) Are they any proactive measures i need to take.If so can you provide me link to a doc which might be helpful
Any comments are appreciated.

Both Windows 2003 Standard Edition and Enterprise Edition are certified platforms for Oracle 10g Rel. 2.
I can see you are currently working with patchset 10.2.0.2.0. You didn't mention if you are planning to upgrade to 10.2.0.3.0 but if you are willing to do so, there are several issues reported by the oracle community, I have included verbatim transcripts from the referred sites, just to name a few:
http://www.pythian.com/blogs/356/oracle-10203-patchset-known-issues-and-bugs
Other platforms to watch out with 10.2.0.3 patchset are Windows and Linux 32 bit - Metalink Note 403616.1 “Many Child Cursors create in 10.2.0.3 on Windows and Linux”. This will likely affect applications with heavy usage of bind variables (perhaps, ones with cursor_sharing=force/similar as well) and busy OLTP is a good candidate. See for yourself the note I mentioned above - it describes some symptoms and consequences (latch contention, ORA-4031, ORA-600) pretty well. The good news is that Linux platform has one-off patch available already - patch 5705795.
http://www.pythian.com/blogs/335/oracle-10203-patchset-is-out
Oracle 10.2.0.3 patchset is out
December 5th, 2006 - by Marc Fielding
My colleague Vamsi Chikkam noticed that the Oracle 10.2.0.3 patchset has been released for Linux and Windows 32-bit. The major bugfixes are the same as my original post with a few additions:
* Identical SQL run in different schemas may modify the wrong schema’s tables (bug 5458753)… we have run into this problem at a client site and it’s not pretty. Workarounds include qualifying schema names in SQL and one-off patches for 10.2.0.2. MetaLink note 329673.1 has more details.
* When cursors are being reloaded frequently in the shared pool, PLS-306/ORA-1722/ORA-1858 errors can occur (bug 4752541)
* Under Windows platforms, triggers referencing :NEW/:OLD using NCHAR/NVARCHAR character sets can error out (bug 5388136)
* The same issue as bug 5388136 above also causes compilation errors on 10.2.0.2 databases upgraded from previous releases under Windows(bug 5383828)
http://www.orafaq.com/maillist/oracle-l/2007/03/05/0329.htm
To inform you about important information regarding your software, Oracle is notifying you of an issue discovered in a recent download of a database patch set or bundle. This issue affects the following patch sets and bundles (hereinafter "Patch Set"):
* 10.2.0.3 all ports
* Windows 32 and 64 bit patch bundles: + 9.2.0.7 Bundle 13, 14, 15 + 9.2.0.8 Bundle 2, 3 and 4 + 10.1.0.5 Bundle 9, 10, 11 + 10.2.0.2 Bundle 9, 10, 11, 12, 13 + 10.2.0.3 Bundle 1
Oracle believes that the number of customers with user data that may be affected by this Patch Set is small; however, the information contained in this announcement is intended to help you determine if your data may be affected and what to do if it is. Please read through this message in its entirety to determine if you have the issue and be sure to perform all recommended steps before contacting support. This information should be maintained for your reference as necessary.
Due to 2007 U.S. and Canadian changes to Daylight Saving Time, you may have stored timestamp data in your Oracle database which was not previously within Daylight Saving Time, but is now included (e.g., timestamp data with dates falling between March 11, 2007 and April 1, 2007). Such data must be corrected BEFORE installing a Patch Set into your Oracle Database. The instructions to detect and correct affected data prior to installing Patch Set are documented in MetaLink (for more information, see MetaLink [1]Note ID # 359145.1).
~ Madrid
http://hrivera99.blogspot.com/

Upgrade from BW 701 Higher version

Dear Experts,
What are the best possible ways to upgrade from BW release 701 with Level 009 .
Either we can upgrade to 7.4/7.3 if so either it will supports BO 4.1 sp3 & Bics Connection.
What are the steps need to check before after upgradation from 701 to 7.4 /7.3.
Regards,
Seshu.P

you are posting in a wrong space. Please move your question to Netweaver/BW area.
BI Platform is for SAP Business Objects products.

Upgrade from 3.0B (release 620) to BI 7.1 (release 710)

Hi,
Please guide me whether it is possible to upgrade from BW 3.0B system to BI 7.1, I am in release 620 now.
Can you please help me locate upgrade guide for the same?
Looking forward for your replies
Thank you
Rajath

lol
There is nothing called as NW BI 7.1,
I found the upgarde guide for NW 7.0 BI : https://websmp205.sap-ag.de/~sapidb/011000358700001461642008E#q2
in SMP,
We can upgrade to SAP NETWEAVER 7.0 from the following basis release:
SAP BW 2.0B; SAP BW 2.1C; SAP BW 3.0B; SAP BW 3.1 CONTENT;
From there we can install EHP1 for NW 7.0 i.e of basis 701.
Thank you all for taking your time to resolve my problem.
Cheers!
Rajath

Cisco Nac 3310 Upgrade From 4.1.6 to 4.7.2

Hi,
I've to upgrade the NAC Enviroment from 4.1.6 version to 4.7.2 version.
This is the scenario.
2 CAM
2 CAS
on 3310 Platform in HA-Pairs.
On Cisco WebSite i found that upgrading to 4.7.2 is possible by this way: 4.1.6 --> 4.1.8 --> 4.5.1 --> 4.7.2. I think that the direct upgrade 4.1.6 --> 4.5.1 is possible. Can you confirm me that?
Well, I've some questions about this upgrade.
1) If the upgrade fails, is there any rollback task to do? Reinstall the CAM/CAS and restore the backup or what?
2) Can you tell me the downtime for the upgrade 4.1.8 --> 4.5.1?
3) The downtime for the upgrade 4.5.1 --> 4.7.2 ?
Thanks in advance for the support!!!

Thanks you very much, really appreciate your help!
I will follow the procedures that Cisco indicates and i hope that everything will work fine!
http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/418/418rn.html#wp75888
http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/45/45rn.html#wp75888
http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/47/472rn.html#wp75888
I noticed that the tar.gz for the 4.7.2 frome 4.5.x upgrade is an ISO file. Is this the correct file?
The attach image shows the content of the file: cca_upgrade-4.7.2-from-4.5.x-4.6.x.tar.gz
Is right?

Upgrading from Oracle 9.1.0.8 to Oracle Database 10g Release 2 (10.2)

Hello everyone;
We are in the process of looking into upgrading from our current Oracle 9.1.0.8 to Oracle Database 10g Release 2 (10.2): Windows
We would like to download and install the 10.2.0.1 base release (Oracle Software). When I go on SAP Marketplace
https://websmp210.sap-ag.de/oracle-download and goto the (Software Download) section and click on
Oracle 10.2 Software (32-bit versions) to download I receive a error NO DATA AVAILABLE.
Is there another area to download the Oracle Software? or do I need to purchase a CD from SAP or can I download this base release straight from Oracle?
Thanks for your time and have a great day.

Hello Pellegrino,
just download it from the SAP container for each product .. for example
-> Installations and Upgrades - Entry by Application Group -> SAP NetWeaver -> SAP NETWEAVER 7.0 -> Windows Server -> ORACLE
Regards
Stefan

Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)

All,
we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28.
The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown:
Message no. KG346
The variant does not adhere to the current Customizing setup
We have saved the variant again, and no problem are present, but the error message refers also to Customizing setup.
Is there a section in the Customizing where it is possible set up the field to show in the initial screen or the new fields (All Valuation Views, Legal Valuation View and Profit Center Valuation View) are due to the release upgrade?
If yes, do you know the transaction/path?
Thanks in advance for your collaboration.
Regards,
Jody Mancini.

Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya

MB_DOCUMENT_BADI - SAP R/3 release upgrade from 4.7.1 to ECC 6

Once finished upgrading from SAP R/3 4.7.1 to SAP ECC 6, from SPAU I see that there was no problem on the implementations of this BAdI. But when I tried the transaction, where this BAdi was implemented in, I realized that my implementations were not working. In addition, from SE19, I see that these implementations are active, so why they aren't working?
I think that there are some problem in BAdI implementations when upgrading SAP release, but I don't know how to solve my problem and turn on my implementations.
Thanks,
Luca

Hi Sunny,
i continued with the option - without ADD ON.
So, this mount point and ADD ON dvd issues are over.
In the next screen, i have to specify the xml file and place the packages under EPS/in. I have done that accordingly and now i get a new error - No matching SAINT package for 'SAP_APPL' found.
Any ideas where i have done wrong?
Thanks,
Mohan.

SQ03, user group removed after release upgrade from 4.6C to ECC6

Dear All,
I have a problem about user group - transaction code SQ03.
After the release upgrade from 4.6C to ECC6 the user group, that I created in the old system, are not present in quality and production environment.
In the development environment there is the user group but doesn't contain the queries that I created in the old environment.
How can I solve this issue?
Can I recover all missing queries?
(moreover I can access to the old environment)
Thanks in advance.
Regards

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

HOW TO UPGRADE FROM Release 10.2.0.1 TO 10.2.0.2

Hi,
HOW TO UPGRADE FROM Release 10.2.0.1 on Linux TO 10.2.0.2 ? Should we apply a patch ?
Thank you.

thank you. Of cours, I looked at metalink site for
RDBMS patch familly, but I did not find any for
upgrading from 10.2.0.1 TO 10.2.0.2
Regards.
Message was edited by:
user522961What's your target OS ?
Why are you specifically want this version?
As you can see from Oracle download page, some OS come with 10.2.0.2 directly.
http://www.oracle.com/technology/software/products/database/index.html
Oracle Database 10g Release 2 (10.2.0.3) for Microsoft Windows Vista
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (64-bit Itanium)
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86-64
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux Itanium
Oracle Database 10g Release 2 (10.2.0.1.0) for Linux on Power
Oracle Database 10g Release 2 (10.2.0.1.0) for AIX5L
Oracle Database 10g Release 2 (10.2.0.1.0) for HP-UX PA-RISC
Oracle Database 10g Release 2 (10.2.0.1.0) for HP-UX Itanium
Oracle Database 10g Release 2 (10.2.0.2) for HP Tru64 UNIX
Oracle Database 10g Release 2 (10.2.0.2) for HP OpenVMS Alpha
Oracle Database 10g Release 2 (10.2.0.2) for OpenVMS Itanium
Oracle Database 10g Release 2 (10.2.0.2) for Solaris Operating System (x86)
Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (x86-64)
Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (SPARC) (64-bit)
Oracle Database 10g Release 2 (10.2.0.2) for z/Linux
Oracle Database 10g Release 2 (10.2.0.2) for z/OS (OS/390)

SAP OS kernel upgradation from release 700 to 710

Dear Sir,
We are upgrading kernel release 700 (185) to 710 (160).
In this we are getting an error of saposcol i.e saposcol is not started automatically when we run startsap.
Currently we are running our application on Kernel release 700 patch level 185.
Should we have to upgrade application pathes after to upgrade the kernel release 710 patch level 160 ?
Is there any dependency in between SAP Application Patch and SAP Kernel Patch or we can run the application on current application patch level, kindly suggest
Regards,
Mushtaque

Dear Mushtaque,
I am not clear on your purpose for kernel upgrade from release 700 to 710. Your SAP_BASIS and SAP_ABA version showing as 710 or 700. If it is 700, there is no reason to change your kernel release. The latest patch is 201. You should go for this patch incase release 700.
Also, as a post processing steps you need to run saproot.sh with root user after kernel upgrade.
Also please find below link for saposcol options.
http://help.sap.com/saphelp_46c/helpdata/en/c4/3a6c40505211d189550000e829fbbd/content.htm
Regards
Gautam

UCCX upgrade from from Release 7.0 to 8.5

Planning to upgrade from Release 7.0 (1) SR04ES02_Build023 to Release 8.5.11003-32 (SU3). Does anyone have a simple step-by-step guide, powerpoint they can share? I understand first I have to apply a SR5?
Any assistance would be greatly appreciated -

Hi Lewton,
You need to bring your current system to UCCX 7.0(1)_SR5 and than perform the upgrade to 8.5 version.
Unified CCX 8.5(1) offers a direct solution for Cisco Unified CCX 7.0(1) SR5 or
7.0(2) to upgrade to Unified CCX 8.5(1).
Hope this helps.
Anand
Pls rate helpful posts !!

Upgrading MRS Tools and Services from lower releases to 2007

Hi,
We have upgraded our CRM Mobile Repository Server to CRM 2007 (see
details below) and we are trying to upgrade the MRS Tools and Services
from lower releases to 2007 SP02 as per "SAP CRM Mobile 2007 SP02 -
Component Upgrade Guide. However, the setup.exe is not upgrading the
Mobile Repository tools as mentioned in the guide (page 34), but it is
giving option to install Mobile client. As per the guide, the setup.exe
program should perform the operations automatically, but it not doing
the same.
Any idea why it is trying to install Mobile Client instead of MRS Tools & Services?
Source:
CRM 4.0 SP08
Windows 2000
SQL Server 2000
Target:
CRM 2007 SP02
Windows 2000
SQL Server 2000
Regards
Chandu
P.S : I have also opened OSS message, but any thoughts in this regard would be appreciated.

Hello Chandu
There are 2 scenarios post MAR upgrdae
1. When an MDW is installed on the same host that contains the MAR,
2. When an MDW is not installed on the same host that contains the MAR,
In both the scenarios, you would run setup.exe present in \Mobile_Client_Upgrade\UpgradePurposeOnly
folder.
If the machine is of scenario 1, setup.exe would upgrade MDW along with MRS tools and services. So it will give options to install Mobile client as well.
If the machine is of scenario 2, It would setup.exe would upgrade MRS tools and services only.
In your case, I am sure you have 4.0 MDW machine which you are upgrading to CRM 2007 SP 02. So It comes under scenario 1 which i have explained above. There is nothing worng happening with setup.exe
Best Regards
Shankar

Upgrade from Solaris 11 Express to Solaris 11 Release (11/11); Guide MIA?

Would there be an easy way to upgrade from Solaris 11 Express to Solaris 11 Release (11/11)? The FAQ for Solaris 11 Release has the following hopeful text:
Can I upgrade to Oracle Solaris 11 from Oracle Solaris 11 Express or Oracle Solaris 11 Early Adopter?
Yes. Customers can upgrade to Oracle Solaris 11 by using the package management tools. Refer to the Oracle Solaris 11
Transition Guide (http://www.oracle.com/pls/topic/lookup?ctx=E23824&id=MF JAI) for more information
But that link comes up with an error page 404, "topic not found".
The one transition guide I can find is:
http://download.oracle.com/docs/cd/E23824_01/html/E21799/index.html
But that covers Solaris 10 jumpstart, not Solaris 11 Express or Early Adopter.
The Solaris 11 documentation at:
http://www.oracle.com/technetwork/server-storage/solaris11/documentation/index.html
Also seems to mention only Solaris 10, not 11 Express or Early Adopter.
I have already downloaded the full repo for Solaris 11 Release, and the live installer, but I'm hoping it's something as simple as pointing the ips manager to a new repository, or just loading the full repo I already have as a local source. I would also like to keep the dtrace and sun studio set up I have now in the Express version, without reinstalling them on a new release version on bare metal.
If it keeps the features of the express version while ironing out a few kinks (gdm authentication bug, etc.), that would rock.
Many Thanks,
Gordon

Alan, Thank You, that worked with no problem at all. 11 Express was already using the correct repository, and only required a pkg command update, then other updates.
So here's what I'm guessing:
1. The Oracle Solaris maintained repository for Express and Early Adopter are now the same as Release, but they do require an updated pkg executable and pkg update command.
2. The second form of the command mentioned in the update guide:
# pkg set-publisher -g http://pkg.oracle.com/solaris/release
-G http://internal.co.com/solaris solaris
is for using a local copy of the repository within our lan or vpn wan.
3. Updates should be fairly regular now that Solaris 11 is in release version.
I think the new hash (SHA 256) fried some of our old gdm settings for our users, so we're creating new user accounts, and migrating the older accounts. We don't have too many, so it's not a problem for us. But that brings up another point:
4. The graphical user manager in Express is now gone, and user and group management are now done with command line interface.
That's fine with me as well. I always use ssh to connect to the machine and then run the screen command for administration. The graphical user manager was always kludgy in Express, and I couldn't get it to work correctly anyway.
This is great stuff so far. Well done.
Gordon

SPS upgrade from 18 to 21 due to Windows 7 and IE 8 Release

Hi Guys,
Our client has decided to upgrade their user's OS from Windows XP to Windows 7. Also the IE will be upgraded to IE8.
We did an impact analysis with a single system for the BW front end. Except a few minor errors, nothing serious troubled the SAP in Windows 7 OS.
SAP has confirmed that for the official support for Windows 7 and IE 8 will require minimum SPS of 21. Thus we are planning for SPS upgrade from 18 to 21.
I am still waiting for the Side Effect Report, I would like to check with you if anyone has encountered any error after Windows 7 upgrade?
Will BEx work even if the OS is Windows 7 and Office is low version such as 2000, 2003.
Any impact on portal 700?
Appreciate any kinds of input from you All
Best Regards,
Shailesh

Hi Guys,
Our client has decided to upgrade their user's OS from Windows XP to Windows 7. Also the IE will be upgraded to IE8.
We did an impact analysis with a single system for the BW front end. Except a few minor errors, nothing serious troubled the SAP in Windows 7 OS.
SAP has confirmed that for the official support for Windows 7 and IE 8 will require minimum SPS of 21. Thus we are planning for SPS upgrade from 18 to 21.
I am still waiting for the Side Effect Report, I would like to check with you if anyone has encountered any error after Windows 7 upgrade?
Will BEx work even if the OS is Windows 7 and Office is low version such as 2000, 2003.
Any impact on portal 700?
Appreciate any kinds of input from you All
Best Regards,
Shailesh

Upgrade from NAC release 4.1(3) to release 4.7(1)

Similar Messages

Maybe you are looking for