Upgrade from OS 10.3.9 to 10.4.6 using Logic 7.0.1

Hello,
Got a question. I have been using a PPC IMAC G5 1.8 with OS 10.3.9 and Logic 7.0.1 and a Presonus Fire Pod for quite sometime now and have had awsome, stable results! Now the time has come to upgrade. I want to upgrade to OS 10.4.6. (then maybe to 10.4.8) Will Logic 7.0.1 run correctly? DO I need to upgrade Logic also to 7.2??
I would love to leave things as they are but I want to add another Presonus FirePod to the chain. Giving me two Firepods chained together for 16 analog inputs. I'm getting ready for a larger recording project and need the additional inputs. Presonus states that in order to daisy chain two Firepods together it needs an OS of a min of OS 10.4.2
Any help would be appreciated.
Thanks,
James

I'm running 7.1.1 on OSX.4.8 without any (abnormal) issues.
Can't confirm the same about 7.0.1.
X

Similar Messages

Upgraded from 10.3.9 to 10.4.8 and now Logic wont open at all!

Upgraded from 10.3.9 to 10.4.8 and now Logic wont open at all! Im using Logic 7.1 Everything was fine till I upgraded.... Now when I click to open Logic it never gets past the startupscreen, and then I get a message saying "Logic has unuexpectedly quit" and I get an option to either close it or restart it or report it to apple, whatever option I choose freezes Logic and I have to right click it in the dock to end the program because it is not responding. Any help is really appreciated! I have wirk I need to get done! (teaches me to upgrade in the middle of a project... what a rookie mistake!)

Repeat after me...
I will not upgrade in the middle of a project
I will not upgrade in the middle of a project
I will not upgrade in the middle of a project
Especially as big an upgrade as a whole new OS!!
O.K. for starters, have you done the routine maintenance, repairing permissions, etc..?
Have you installed the Pro Application support specifically for Tiger?
Let's start there...

Technical upgrade from 4.6C MDMP system to ECC 6.0 using CU & UC approach

Hi SAP Experts,
We are embarking on a project for Technical upgrade from SAP R/3 4.6C MDMP system to ECC 6.0 using the CU & UC approach for our Asian operations (comprising of India, Japan, Taiwan & Singapore).
Please share with me the Best Practices you followed in your projects, checklists, DOs, DONTs, typical problems you encountered and the possible safeguards, any other useful information, etc.
Since very little information is available from Organizations who have used the CU & UC upgrade approach successfully, I am raising this in SDN to share your experiences during the Technical upgrade.
All useful information will be surely awarded with suitable points.
Looking for your invaluable inputs which will be a BIG help for our project.
Best regards,
Rajaram

Hello Rajaram!:
It's a very big project, that you have to do in a lot of steps........
If you want sent me a email with the problems and you want.
Regards,
Alfredo.

I upgraded from Iphone4 to iphone 6. I synced 4 using a PC. Now I want to transfer data to iphone 6

I upgraded from iPhone 4 to iPhone 6. I synced iPhone 4 using a pc windows 8. I want to transfer music etc to iPhone 6. ITunes only recognizes iPhone 4. Any advice?

Create a backup from the iPhone 4 using iTunes and use this backup to restore your iPhone 6 with iTunes.

Upgraded from OS 10.4.11 to 10.5.8 - Now Logic 8 crashes upon launch

Howdy - I've just upgraded from OS 10.4.11 to 10.5.8, and several of my apps such as DSP Quattro, Sample Manager and Izotope RX are launching fine, but when I try to launch my Logic Pro 8.02 it crashes with the "+The application Logic Pro quit unexpectedly+" message.
My copy of Nuendo 4 is also now crashing upon launch in this same manner.
Any advice appreciated - I gotta work with these DAW's tomorrow! :^O

Bejeeber wrote:
Yep I'm happy to report that all my apps are 100% legit.
It's not Apple related....
Sounds to be like you have an older version of Propellerheads "Rewire" installed... there are several applications that auto install rewire, it could have been melodyne or even Nuendo.
You either need to update Rewire to a Leopard compatible version or -Move- the Propellerheads folder out of ~Library/Application Support folder.
If you use rewire you will need to update.
pancenter-

Upgraded from hp f2400 to oficejet 6600/6700 how to use HP solution center with new equipment?

I was using the HP F2400 all-in-one copier. I just upgraded to the HP OfficeJet 6600/6700 all-in-one. I want to upgrade the HP Solution Center or install another Solution Center for my new copier. How can I make this happen. My operating system is Windows 7. To me the Solution Center is the best way to find/track all documents, scans, pictures and everything else. Please help.

If you are done with the f2400, I recommend going to Start > All Programs > Hewlett-Packard > [your printer model] and uninstalling the software using the uninstaller in that folder.
Restart your PC.
Download and install the software for your new printer from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-101682-1&cc=us&dlc=en&lc=en...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Upgrade from os x tiger to leopard so i can use my ipod or iphone

recenly a friend sold me power mac g5 for cheap 100 dollars. to my surprise i cant use to put music on my ipod or iphone .what do ineed to change to be able to upgrade to leopard,he told me i couldnt upgrade to snow leopard only leopard.this is what i have processor dual 2GHZ POWER PC G5 2.5GB DDR SDRAM MACHINE MODEL powermac 7,3 .cpu type powerpc g5 3.0.so what do ineed to upgrade n if it can be done i know its an older model but it be nice to upgrade .thanx for the time n help u have a nice day

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

Upgrading From Final Cut Pro 5 to 6 - can you use full install disk?

Hi,
I have one MacBook Pro running Final Cut 6 (with Final Cut Studio 2), and another one running Final Cut Pro 5 (with Final Cut Studio). We're looking to upgrade the second one to Final Cut Studio 2.
Does anyone know if the upgrade can be done with the disks from the full install box of Studio 2, using the product key from an upgrade? We happen to be in the middle of East Africa at the moment, so shipping is an issue...
Thanks

You CAN install Final Cut Studio with only the upgrade disk set BUT you will need the product key for BOTH the Final Cut Studio 2 AND the previous version.
After you insert the Final Cut Studio 2 upgrade installation disk you will first be asked to input the product key for the upgrade version and then after you will be requested for the product key of the previous version.
After this, the installation process does NOT require any disks from the previous version of Final Cut Studio.

Issue with SAP GUI 7.30 launching with users upgrading from 7.10

We started rolling out SAP 7.30 GUI Final 7300.3.7.117 out to people, and we've ran into this error with people who had upgraded from SAP GUI 7.10.
Our environmental variable uses saplogon.ini (SAPLOGON_INI_FILE) and points to c:\windows\saplogon.ini
I don't know why the program is trying to search for saplogontree.xml.
I've tried uninstalling, rebooting, reinstalling. Deleting some of the %appdata% SAP folders.
I need some guidance as people who upgraded from GUI 7.20 do not run into this issue.

This popup would make sense Jason,as the path C:\Windows\SapLogonTree.xml would not be a valid path to this file.
Really, 7.10 should not have been used at all as an upgrade path as this had finished support in 2009
If you have a small number of users with 7.10, it's recommend to remove it via add/remove programs in the OS, then install a clean 7.30 gui.
The environment variable should not point to C:\Windows\ at all since this is a restricted folder in
Windows Vista and higher, and will only cause further trouble later on in the updates
See note http://service.sap.com/sap/support/notes/1409494
Jude

How to handle the interfaces in upgradation from 4.6c to ECC6.0

we are going for the upgrade from 4.6c to ECC6.0
actually we are using n number of interfaces like webmethods, informatica powercenter, ALE, EDI....
powercenter was created some programs in SAP R/3, when we are upgrading from 4.6c to ECC6.0, what kind of issues we will face regarding this informatica. what is strategy we have to follow to upgrade this informatica in SAP, if anyone have the documents regarding informatica powercenter please help me and guide me
if anyone have documents regarding this interfaces upgradation or procedures bestpractices, common issues please forward me
thanks,
chandra

thanks

If upgrade from CS2 to CS 3 can I still use GoLive ?

If I upgrade from CS2 to CS3 with Dreamweaver, can I still use/run GoLive to maintain existing GoLive files for a time, until I make the transition ?, or once I install CS3 I need to transition right quick ?
thanks if anyone knows the answer to this ... Laura

> In my case, once I installed and activated CS3 my CS2 apps stopped working. Was GL CS2 excluded from this shutdown?
What do you mean by stopped working? Did you get an error message when launching the apps?
John

Just paid for LR upgrade from perpetual 5.7 to LR 6 (not CC). Why am I seeing "30 days left in lightroom mobile trial"?

I suspect it has to do with me downloading CC for Photoshop and LR MANY months ago.
I did not uninstall CC.
How do I clean this up? I'm not switching to LR CC now. I bought perpetual upgrade from LR 5 to LR 6.

You can also use the Lr Mobile service for 30 days as a trial without switching to Lr CC. - Guido

Upgrade from PS Elements 6 to 11...where are the backgrounds, frames, ...etc?

I just upgraded from PS Elements 6 to 11. I am used to using some of the nice backgrounds, picture frames, lettering ...etc. that came with 6 in the Editor. I cannot find any of them under "Create" in 11. Are they gone? Is there another place to find them at Adobe? Pls help. I really miss them.
Ella

Well you need internet connection now, for one time atleast, to use those backgrounds, graphics, frames and themes.
In order to save the space on machines and reduce the download size of the software, Adobe has moved most of the content online. So if you have internet connected, just launch Editor, the thumbnails will start downloading in the background. So after some time you will see those items added in your "Graphics" panel.
But those are just the thumbnails (which will have a blue strip on the top right side). In order to use them you need to download each individually. Just double click on the one you want to use.and it will be downlaoded (Needless to say that you will need internet connection for this), and then it's your to use any no of times, because now it's in your local machine.
One Benefit - It save a lot of space on your system, because not use many use all the graphics.

Upgrade from Tiger to Leopard: Boot Camp Question

I am considering upgrading from 10.4.11 to Leopard. I am using (still) the Boot Camp Beta program and have a considerable amount of data stored in my WIN partition. The Apple web site has this to say:
+Already running Boot Camp? Even easier.+
+If you’re already working with Boot Camp Beta, you’re practically finished before you start. All you need is some new drivers. To install them, simply start up your Mac in Windows and update the drivers from the Leopard DVD.+
Am I to understand from this that I can upgrade to Leopard without having to wipe clean my HD first? I can keep the partition intact with all the data on both the Mac and Win sides? If this is true, then I am REALLY going to consider this upgrade? All along I felt that I would lose everything on the HD and have to reinstall it all. At this point I do not want to do that.
I am looking for feedback from folks in my situation who have upgraded and/or Apple techs that know folks who have done this.
Furthermore, once the switch was made, would I then have some control over the resizing of the partition?

Hi NoBite;
While I agree with William as far he went with his answer, I think there is a bit more to this then what he said. While it is true that only the Erase & Install will wipe out all the data, the other methods can wipe the data if the wrong thing such as a power failure happens at the wrong time. Hence the reason I alway suggest having a bootable clone before any major undertaken with you system.
Allan

What is the sequence for upgrading from 10.4.11 to lion

What is the sequence for upgrading from 10.4.11 to lion. Can't use many apps without it. HELP

Quicken is an example that the OP noted is important to her, too!
Intuit makes it very difficult to find this link?!
Everytime I want to find it to post it for someone else, I have to Google: "cnet quicken 2007 for lion" and then in top listed link: Topper Kessler's review for CNET, I find the direct link to Intuit
This program will work with Quicken 2005, 2006 and 2007 data files directly. If you have a data file from an older version, such as I did, Quicken Deluxe 2002, you must use the PPC version of either Quicken 2006 or 2007 to update the data first; and then the data will work in Quicken 2007 for Lion.
For other PPC programs that require Rosetta, I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Upgrade from OS 10.3.9 to 10.4.6 using Logic 7.0.1

Similar Messages

Maybe you are looking for