Upgrade from OS X (10.52.8) to Snow Leopard

Will Snow Leopard work on Mac Pro that was manufactured in 2007?

Yes it will if the following conditions are true about your Mac:
- Mac computer with an Intel processor
- 1GB of memory
- 5GB of available disk space
- DVD drive for installation
I see no problems as 10.6 can be installed on any Intel-based Mac as long as it has enough memory and storage.

Similar Messages

I want to upgrade from OS X 10.5.8 to Snow Leopard. When trying to back-up to a WD 1 TB external drive, the back-up process stalls at about 4 GB. Grateful for any clues to assist with the backup issue please.

I want to upgrade from OS X 10.5.8 to Snow Leopard, then to Lion. When trying to back-up to a WD 1 TB external drive, the back-up process stalls at about 4 GB download. I would be very grateful for any clues to assist with the back-up process please.

That disk is very probably formated as FAT 32, the normal format for PCs. FAT 32 cannot support files larger than 4 GB; also, it corrupts some types of Mac OS files. If you want to securely backup your mac files, you must have a disk prepared for Mac OS.
Therefore, open Disk Utility, choose again 1 partition for your external disk and, under Options, GUID partition map (it may also be a boot disk for an intel mac), then format it as Mac OS Extended Journaled. Y0u are done.
If you want to exchange data with PCs, you should chose Master Boot REcord and NTFS format, for this you must use a additional utility like NTFS-3G. But note that mac files may also get corrupt in NTFS format.

Upgrade from Tiger 10.4.11 directly to Snow leopard 10.6.3 (dvd)

After reading your advices I 've tried to upgrade my MacBook 2Ghz Intel Core 2 duo directly to Snow leopard 10.6.3 from the DVD. But it did not work ! The install program said it is not possible. Could you tell why and what I have to do ? By the way I can't find no more Snow Leopard in the Apple store ! I need this updated in order to active a new device and need to have the last version of I Tunes. So... Thanks for your help

Hello, BD Aqua many thanks for your prompt reply. It's a gray one. And the message is "OSX can't 'be installed on this computer " or something like that. The installing program doesn't launch anything but just ask me the language I choice and after ...relaunching and relaunching ... nothing happens. However when I' ve called previously the Apple support they told me to upgrade directly in Snow Leopard. I want to be sure to have the possibility to install it before purchasing it and in which version ?
And do I have to erase my previous disk as somebody recommand it before installing the new OS ?

Upgrading from OS X 10.5.8 to Snow Leopard

When upgrading from 10.5.8 to snow leopard is there any prep required and do i need to reload installed software like adobe pro, skype, ms office etc?

Only some 10.5 software is PowerPC only. Apple's transition to Intel began with Mac OS X 10.4.4. Software written for any system 10.4.4 and up could be PowerPC only, or Intel only. or able to be used on both. The key with discovering which it is, is asking if it is coded for "Universal" or looking on the search engines on the user tip and its associated links. 10.6.8 was the last system that included Rosetta as an optional install, which allowed non-plugin nor-driver associated PowerPC applications to run on Intel Macs. 10.5 does not include support for Classic, but the PowerPC Macs that could boot into 9, and supported 10.5 could still boot 9 after installnig 10.5. Classic allowed one to run Mac OS 9 applications side by side with Mac OS X in much the same manner Rosetta allows PowerPC applications to run side by side with Intel applications. The only difference is you had more control over a few Mac OS 9 extensions within Classic, whereas no deliberate control can be given to PowerPC kernel extensions within Rosetta.

Upgrading from OS X 10.5.8 to Snow Leopard via DVD. Do I have to uninstall anything first?

Don't want to cause any problems with my system - just need to upgrade so that I download a Citrix file that requires Snow Leopard at a minimum. Help!

No, you don't.
(61909)

I just downloaded bootcamp 3.1 to upgrade from 3.0. I am using Snow Leopard. is there anything special I have to do run the upgrade version when I open Boot Camp Assistant?? Thank you

Hi everyone
I am running Snow Leopard on my early 2006 MBP. I just downloaded Boot Camp 3.1 so I can upgrade 3.0. Is there anything special I need to do to "install" 3.1 so that when I run Boot Camp Assistant it uses 3.1 instead of 3.0? Thank You.

The Boot Camp 3.1 drivers you downloaded have to be installed in Windows after running Boot Camp Assistant. That update does not apply to Boot Camp Assistant, and as you are using Mac OS X 10.6.8, you are using the most recent Boot Camp Assistant version for Snow Leopard.
Once you have installed Windows with Boot Camp, insert the Snow Leopard DVD in Windows and install the Boot Camp 3.0 drivers. Then, install the Boot Camp 3.1 drivers

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

I'm trying to migrate from mobileMe to iCloud but I have Snow Leopard (the latest version). It looks like Lion is no longer available because Mountain Lion comes out next month (July). The problem is mobileMe ends on June 30th. How can I migrate?

I'm trying to migrate from mobileMe to iCloud but I have Snow Leopard (the latest version). It looks like Lion is no longer available because Mountain Lion comes out next month (July). The problem is mobileMe ends on June 30th. How can I migrate?
My iphone and my ipad are compatible but when I try to go to icloud on my phone it says to do it on my computer.
I would like to have my calendar, contacts, etc.. all sync like they do now. Is there a way to upgrade before June 30th? If not, will the gap be an issue or will I just be able to buy mountain lion and sync everything?
Any suggestions?
Thank you!

You can buy Lion in the App Store now, but move to iCloud now. If you wait to Mountain Lion, you will only have Mail in Snow Leopard, so you will lose syncing unless you use Lion or Mountain Lion. It's up to you

Why can't I upgrade to yosemite? I'm currently running snow leopard on my white macbook.

Why can't I upgrade to yosemite? I'm currently running snow leopard on my white macbook.

White MacBooks are NOT eligible to upgrade to either 10.8 Mounain Lion, 10.9 Mavericks or 10.10 Yosemite.
You maybe able to upgrade your white MacBook to OS X 10.7 Lion
OS X Lion system requirements
To use Lion, make sure your computer has the following:
An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended)
7 GB of available disk space
2 GB of RAM
You can purchase a OS X 10.7 Download code here.
http://store.apple.com/us/product/D6106Z/A/os-x-lion
Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
Next,
If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe could no longer secure their rights to continue to use Rosetta in later versions of OS X.
So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
Also, check for app compatibilty here.
http://roaringapps.com/
If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUpMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
Once you have determined all of this, you should be able download OS X 10.7 Luon from the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password.
You can then begin the download and installation process by using the paid download code to Download and install OS X 10.7 Lion rom the Mac App Store.
Good Luck!

I need to update from Mac OS 10.4.11 to Snow Leopard

I need to update from Mac OS 10.4.11 to Snow Leopard, do I just buy Snow Leopard???

Yes! If your Mac meets the requirements:
Requirements for OS X 10.6 'Snow Leopard'
http://www.apple.com/macosx/specs.html

How do I delele all my contacts from my IPad 3. I use snow leopard so I can't use icloud

How do I delete all my contacts from my IPad 3. I use snow leopard so I can't use icloud. I just got my first IPad so I am new at this.
I believe I can use I tunes. I know how to sync my address book into the IPad but can't remember how to delete the ones that are there.

lesstress wrote:
How do I delete all my contacts from my IPad 3. I use snow leopard so I can't use icloud. I just got my first IPad so I am new at this.
I believe I can use I tunes. I know how to sync my address book into the IPad but can't remember how to delete the ones that are there.
If you are syncing your iPad with your computer, one way to delete all your contacts might be to connect the iPad to the computer, then in iTunes select the iPad in the sidebar. Once you've done that, go to the Info tab. Uncheck the box for syncing Contacts, then in the lower right, hit Apply. All the Contacts on your iPad will be gone.
You haven't asked for solutions to use Snow Leopard with iCloud, but there are some solutions for Mail, Address Book and Calendar.

I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. How can I get my scanner to work?

I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. I did get the printer to work after downloading the printer software from Apple. I used to have 10.4.1. How can I get my scanner to work?

Check here to see if there is an updated driver available for it:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

Can Mac mini October 2012 boot from Mac OS X 10.6.8 (Snow Leopard)?

Can the Mac mini October 2012 boot from Mac OS X 10.6.8 (Snow Leopard)?
It is needed to run applications that require Rosetta (Eudora e-mail, Palm Desktop PDA-PIM, Canvas drawing from ACDsee, etc). Thanks

Can the Mac mini October 2012 boot from Mac OS X 10.6.8 (Snow Leopard)?
No. Your best option by far is to find updates or replacements for that long-obsolete software. In the long run, you'll have no other choice. As a last resort, you could do this:
Installing Snow Leopard (and Rosetta) into Parallels
The instructions are slightly out of date. That's not a recommendation and I haven't tried it myself.

Can iMac October 2012 boot from Mac OS X 10.6.8 (Snow Leopard)?

Can iMac October 2012 boot from Mac OS X 10.6.8 (Snow Leopard)??
It is needed to run applications that require Rosetta (Eudora e-mail, Palm Desktop PDA-PIM, Canvas drawing from ACDsee, etc). Thanks

Consider installing Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

How do I delete photos from iPhoto on my Mac os x snow leopard

How do I delete photos from iPhoto on my Mac os x snow leopard? Please can someone help? Thanks.

Move the photos you wish to delete to Trash in iPhoto and then empty the Trash in iPhoto by click Empty iPhoto Trash in the pull down menu under iPhoto.
Allan

Upgrade from OS X (10.52.8) to Snow Leopard

Similar Messages

Maybe you are looking for