Upgrade from PPC G5 to MacBook Pro (Intel)

Can iTunes and iPhoto be transferred from non Intel Mac to Intel Mac?

Do you want to just keep the content and libraries, or do you also want to keep the old application versions? As Niel says, new versions will come with the Mac Book Pro. It may be possible to run the old versions if you really want to, but depending upon the age of the version there may be disadvantages in the interface overhead for an Intel Mac to run PPC software.

Similar Messages

Help with migrating from PPC G5 to MacBook Pro 2012

I haven't even booted up my new MacBook Pro, because a lot of postings in Discussions and elsewhere warn me of problems if I try to use Migration Assistant to bring my user data and files across from a PPC Mac to a new MacBook Pro running Lion.
BORING DETAILS: I'm jumping from a dual G5 Dual Power Mac (PPC, running Leopard 10.5.8) over to a 2012 MacBook Pro, (a 15" fast i7 quad non-retina, with 1 GB GPU and 16 GB RAM, running latest Lion). I have a lot of data and apps, including "pro apps" like Final Cut and lots of photo- and video-production software.
I know that I'll need to reinstall all my apps from scratch, even Universals, especially all my Pro apps. But, I have read some positive guidance about possibly using Migration Assistant to move only my User identity and related files across to the MBP. Then, reinstalling / upgrading apps. And, afterwards, using Firewire (target mode) to move various data folders and docs.
I'm confused. I like the idea of moving myself as User/admin across, relatively intact -- IF that's a good idea -- then reinstalling apps. Then, moving various files (docs andand data) across. Hopefully, this route wind up with minimal or zero PERMISSIONS problems. Guidance or links, pretty please...?
I've read the great postings from Kappy and some others, in Discussions, but most don't address the issue of moving User identity and data from the PPC Mac over to the Intel. Maybe it's a "big" issue only in my mind?

Joshua Coventry and sig and others:
Thanks!
If you combine those last two pieces of advice and mix in the best of the earlier suggestions, that's pretty much what I wound up doing:
I used Setup Assistant to create a "NewGuest" account on the MacBook Pro, with minimal information submitted to Apple (basically, only my correct name and address, etc.). Then I immediately used the Migration Assistant to bring over ONLY 1) my main User admin account and its Home folder and 2) the computer settings from the G5 Power Mac.
Finally, I changed the "NewGuest" to a regular account (non-admin), rebooted the MPB, and deleted NewGuest and its home folder. Then began the long job of feeding appropriate software into my new MBP: installing or reinstalling the latest Intel versions of all of my key productivity apps and utilities.
So far, I'm getting very good results. No MBP indigestion, but it's daunting to look at a new Dock that's now almost totally populated by question marks (the G5's Dock had almost fifty apps)! There's one major benefit: a chance to reconsider whether I really needed all of that stuff to begin with, and if I need it now!
The need-it-now vital stuff is being pulled over via Firewire, and I've just bought an external USB 3 enclosure for the G5's main boot drive, and it will now be available as a handy source for various files, docs, settings as I need them, and for any "second thoughts" that I might have about what really belongs on the MacBook Pro's boot disk. All is well, and it looks like it will STAY well (but stay tuned!).
Thanks, y'all! Hope this helps someone else facing a similar challenge.

Upgrading from Powerbook G4 to Macbook Pro. What to expect in HDV?

I have Final Cut Pro 5.1
I do alot of editing in HDV. Although editing HDV on my Powerbook in FCP is possible, it's a little slow and rendering times are a little painful. What kinds of speed/rendering improvements should I see if I purchase one of the new Macbook pros? What are some of the everyday improvements in FCP that you noticed by upgrading?
thanks in advance,
dave

you are in for such a treat!
i don't have specific numbers for you, but the difference in performance of these machines is substantial
quite apart from cpu's and clock speeds, the MBP's have also got across the board better faster components such as faster beefier gfx gpu's, SATA hard discs etc
this year old comparison from barefeats pits a 2.0 GHz Powerbook G4 against a now very much outdated 2.0 GHz MBP Core Duo
http://www.barefeats.com/pbcd.html
given that the current MBP's not only have a notably faster core clock speed than the earlier models, and also the newer generation of the chipset, Core 2 Duo vs the original Core Duo is significantly faster in itself at the same clock speed
http://www.barefeats.com/mbcd9.html
Enjoy
Andy

Upgrading from what system to MacBook Pro?

Out of curiousity, what systems did people have before switching to the MacBook Pro? Any quick thoughts on the transition from your old system?

I'm going from a Gateway 200ARC - 1.4GHz PM, 512MB RAM, 40GB, Intel video (shares the main RAM). The MBP should be quite a jump for me.
The last Mac I owned was a PowerMac 8500/120MHz/64MB/1GB (that's not a typo, it had a full gigabyte of drive space) running MacOS 8.5. Again, the MBP should be quite a jump.

Install logic 9 upgrade from logic 7 on macbook pro retina

i bought a new MBP retina, (no disc drive) and want to install logic. my logic studio 9 is an upgrade from logic pro 7, and the 7 won't run on the new com.
So how do I do this install?

Could be you khave a corrupted Win 7 install file/files.
Try downloading the Win 7 ISO for the version you have from here.
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit- direct-download-links/
Then burn that ISO to a USB or DVD, USB would be better.

UPGRADED 10.4.11 ON MACBOOK PRO TO 10.5, NOW UPDATES TO 10.5.8 WILL NOT SAVE, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS.

UPGRADED 10.4.11 ON MACBOOK PRO INTEL TO 10.5.1 (FAMILY PACK VERSION), UPDATES TO 10.5.8 WILL NOT SAVE DUE TO, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS? CAN I UPGRADE TO 10.6.1 WITHOUT SAME ISSUE.

Well, not sure if having the disk in a firewire case or over a network would have made a difference.
The solution of making a disk image as in article http://support.apple.com/kb/TS2664 was what worked for me.
After, mounting the disk image the Migration Assistant completed without errors. So far everything seems to be working like it did on 10.4.11.

Just updated from a late 2008 Macbook Pro and I am getting a blink on my external screen

I just upgraded from a late 2008 Macbook Pro with a AMD Radeon HD 6770M 1024 MB graphics card and I am now getting a blink (black screen) every few seconds.
Anyone know a fix.
Thanks

You could always give it a shot - the only problem that you might run into is that the the early 2011 might not boot when the hard drive is swapped from the 2008 hard drive. Some versions of OS X are simply not compatible between different models.
But it's worth a try...
Clinton

I just upgraded to Mavericks on my Macbook Pro and now i can't print anything from Outlook version 14.4.3. any suggestions?

I just upgraded to Mavericks on my Macbook Pro (2.7 GHz Intel Core i7) and now I can't print anything from Microsoft Outlook version 14.4.3. any suggestions? I can print from Word and Excel w/o any issues.

Try a reset > OS X Mavericks: Reset the printing system

Macbook Pro (intel) version of Leopard Install on a G5 (PPC)?

Will a version of Leopard that came with a Macbook Pro (intel) install on a G5 (PPC)?

The Gray install disks that come with any Mac ONLY install that make and model Mac.

How do I upgrade to Mavericks from Lion with a Macbook Pro late 2011?

How do I upgrade to Mavericks from Lion with a Macbook Pro late 2011?

Mavericks is no longer available from the App Store.
If you meet the Mavericks requirements then you can install Yosemite at no charge.

Wireless N upgrade for Macbook pro Intel Core Duo (Purchased 8/2006)???

Firstly, I am a little angered that apple has not come out with any directly supported options to allow people with my macbook pro to upgrade to the new wireless N capability.
Therefore I have found a 3rd party option that is being offered by fastmac (http://fastmac.com/ncard.php) that will allow for wireless N wifi.
My only concern is if having this installed (professionally by them or by an authorized reseller, say compusa) would cause my entire applecare warranty to be voided or just the part that covers the wireless card. I could deal with having the wireless card voided as it would be under warranty by fast mac...
Macbook pro intel core duo Mac OS X (10.4.9)

Your warranty is not voided by installing the Airport card. However, any damage that may be caused by the installation of the card would not be covered under the warranty.
Secondly, the Airport Extreme card that supports 802.11n is available as an upgrade kit for Mac Pros. Some Apple dealers may be able to obtain and install the card for you in your computer.

Leopard not wanting to install on MacBook Pro Intel Core Duo?

I want to bump up to Leopard on my two main computers (MacBook Pro Intel, and a tower, also Intel)... but as I'm using them 24/7 on projects I dare not have problems with ... I don't want any down time getting Leopard to run seamlessly on those systems.
To this end, I 'borrowed' the Leopard disks from my son, for whom I just got a new iMac ... and was going to try it out on my spare (no critical projects) laptop (MacBook Pro Intel). At the beginning of the install the pop-up tells me it can't 'install Leopard on this computer'.
Could this just be some new security device to inhibit pirating? Related specifically to new iMacs? Or am I going to have problems when I try to install the Leopard I was about to buy to upgrade all my computers?
All ears,
B.

FYI, an OS installer doesn't just blindly install all the OS components it contains; among other things it runs "pre-flight" & "post-flight" scripts to make sure the Mac's hardware is compatible with that version of the OS, to assemble some of the pieces (like preference files) on-the-fly prior to installing them, & to initialize & clean up some of the items placed on the drive during the installation process.
If it helps, think of it as little mechanized factory that builds customized, turnkey products based on the measurements & specifications it obtains from the buyer.
The retail version of the OS contains the generalized version of this factory; the OEM disk sets do not, since they are intended for one model only.
So, if you want to "test drive" the OS, do it on your son's Mac. You won't be violating the license terms & your test will be much more indicative of what you will see with the OS properly installed on your Macs.

Macbook pro(intel based) all apps hang but mouse still work

My Macbook Pro(intel) running OS X Mountain Lion 10.8.1 has started hanging after the last OS upgrade. All apps stop responding but the mouse pointer contines to function, though mouse click doesn't respond as all apps are not responding.
Any ideas or suggestion?
Best
VC

Yes, I have this problem as well. Although it only happens once I have resumed the computer from standby/sleep mode.
I haven't contacted Apple yet as it has only happened again recently and I put the first time down to a once off. I really hope this is not a hardware issue as I am already suffering from airport related kernel panics.
Anyway, from browsing the internet somebody mentioned that disabling "accidental input" in System Preferences/Keyboard & Mouse may solve the problem. I have done that and it hasn't happened again yet. Although, this is not an ideal solution.
Please let me know if you hear of any developments. I was hoping that switching to Mac might get rid of all my computer troubles (previously XP) but all I've had is problem after problem .

Why can't I rent a movie from iTunes on my Macbook Pro?

I am trying to rent a movie from iTunes on my Macbook Pro but when I click on the gray rent movie button it does NOTHING, like I never clicked on it. I am signed in, I authorized the computer and have rented movies in the past. I do have OS X 10.5.8 and iTunes 10.6.3(25) because I haven't purchased new software to upgrade something that works just fine, until now. I'm not sure if the software is the problem because I have rented movies in the past 6 months. I have just tried to purchase other movies, and even songs, and it doesn't do anything when I click the gray price to purchase the song. Please help.

Same exact thing just started happening to me. Same issues as you. I have tried restarting itunes and reinstalling many times with no luck at all.

Bluetooth from iPhone 3GS to MacBook Pro not working?

I am having (seemingly) bluetooth connection issues with "some" devices to my MacBook Pro. I note:
* Mouse pairs fine
* iPhone 3GS does not remain connected (focus of this forum question)
Error - after pairing my iPhone 3GS to my MBP I get an error:
The Bluetooth Network is Unavailable
There was an error connecting your device. Make sure the device is turned on and in range.
Notes:
* MacBook Pro details:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i7
System Version:          Mac OS X 10.7.3 (11D50b)
Background: Ultimately interested in teethering my iPhone 3G data connection to my MacBook Pro, but for the moment the bluetooth connection won't even remain in place.

nothing in these articles helped unfortunately - some more clarification:
tethering via USB from iPhone 3G to MacBook Pro => WORKS
tethering via Bluetooth => does NOT work, with bluetooth connectioning not staying up
During pairing process:
devices "see each other"
pairing appears to work, then you see that the connection drops out directly afterwards (almost immediately)
on iPhone message = "Connection Unsuccessful - XXX's MacBook Pro is not supported"
on MacBook - it's just the connection in Bluetooth options shows up as not connected
in /var/log/system I see some bluetooth related lines:
Apr 18 19:33:14 Gregs-MacBook-Pro bnepd[18950]: [IOBluetoothDevice instantiateChannel] BluetoothHCIAuthenticationRequested failed (0x0006), so retry
Apr 18 19:33:14 Gregs-MacBook-Pro sandboxd[18966] ([18950]): bnepd(18950) deny mach-lookup com.apple.blued
Apr 18 19:33:14 Gregs-MacBook-Pro bnepd[18950]: [IOBluetoothDevice instantiateChannel] BluetoothHCIAuthenticationRequested failed (0x0006), so disconnect device
Apr 18 19:33:53 Gregs-MacBook-Pro blued[22]: Removing Bluetooth configured device: 00-26-08-23-23-9d
Any other ideas? Is it a physical problem with my MBP? but then again my bluetooth mouse stays connected ok. And in terms of the iPhone well it tethers fine to the iPad via bluetooth....

Upgrade from PPC G5 to MacBook Pro (Intel)

Similar Messages

Maybe you are looking for