Upgrade from PSE5

I want to upgrade to Photoshop Elements 10 from Photoshop 5. Is there any concerns I need to be aware of?
Is version 5 automatically deleted when complete or do I manually have to remove the program?

Starting over to hopefully make this more simple for me. I formated the computer and removed the partition so now I will have all the software and photo's stored on the C: drive.
Here is where I am at now.
I reinstalled PSE5 and restored one of the catalogs that came from a different computer and the location now is:
C:\Documents and Settings\David\My Documents\My Pictures\Documents and Settings\sherry\My Douments\My Pictures\01 04 11
I am now ready to install another catalog. My question is what location and file name for this next catalog?
I attempted this:
Restore files and Catalog to: I put check mark in New Location> Specify Destination: automatically shows C:\....\David\My Documents\My Pictures
I then put check mark in Restore Original Folder Structure>then chose Restore.
I get the following message:
You have chosen to restore a catalog with the same name as the one that is currently open. It is recommended that you complete a Backup of your current catalog first before attempting to overwrite it. Do you still want to overwrite the current catalog?
To refresh you on want I am attempting to do is to bring more than one catalog into one so that the dates remain in correct order on each picture and they keep the tags. I know there is more steps than this to get it accomplished but I need to make sure I get them in right location first then I will move onto the next step of changing them to watch folders. I am not 100% sure I understand the watch folder step. You mentioned in a previous message that you have to create subfolders for the watch folders? I wasn't sure how to create sub folders.
Thanks very much for you help!

Similar Messages

Upgrading from PSE5 to PSE9 and Organizing Photos - Help Pls.

Hi everyone,
I've finally got an upgrade to Photoshop Elements - I'm currently using 5.0 and I was given version 9.0 for Christmas... so excited!
I wanted to see if anyone has any advice for upgrading - in some ways, I want to start over from scratch and re-import all of my photos to the organizer. Some photos are duplicated, and some are not showing up at all even though I know they're on the HD and also in the organizer files, but they don't show up in the actual photo thumbnails - very confusing.
I also don't like the chaos I used for tags when I first started taking and editing photos - so I'd like to restart that as well.
Has anyone else recently upgraded Photoshop Elements? Can you start clean, or does it import all of the tags and issues from the previous version you used?
Also - does anyone have any advice for how to actually organize the photos? I keep them on my HD, but I don't know if the volume of photos can or will cause problems. I also back up to an external HD for safekeeping. Any advice on how to store and organize photos would be very much appreciated.
Thanks!

Hi Julie
When you upgrade to PSE9 the program will automatically offer you the choice of upgrading an earlier catalog.
Simply reject this and you can then start over and import photos and tag them as you like.

Why was i sold pscs5 upgrade from pse5 and now im having problems trying to install because pscs5 has no option for pse5. why is that? and can someone help me?

someone please help? the computer that i work on does not have an internet connection. and now im stuck!!!!!

Photoshop Elements is not in the upgrade path for Photoshop. If you just purchased Photoshop CS5 it was not done thru Adobe... they do not sell older versions of their software.

Transfering files from PSE5 organiser to CS4

I have been tempted by Adobe to upgrade from PSE5 to CS4 at a reasonable price. I have about 6,000 individually named photos in pse5 organiser / pse5 "collections". If I upgrade to CS4 what do I need to do to process these organiser/collections images in CS4? Is there a way to transfer all these files, and keep their names/metadata, to CS4? In pse5 "organiser" I can locate any photo by typing in a key word from the photo title; can I do this in CS4 using my present pse5 files?
Thanks in advance for your assistance.
Malcolm

Bear in mind that the image files do not "belong" to PS Elements they are just on your hard drive where you put them. They don't have to be transferred as you put it.
I am not familiar with PSE but there is a function to export the keywords in a format which can be read by Photoshop proper. They will be available in Bridge where you can organise things.
Sorry to be a bit vague but there is more information in the Bridge forum.

I want to upgrade from Photoshop Elements 5 to Lightroom 5. Can Lightroom 5 read/convert a Photoshop Elements 5 catalog, or is Elements 5 too old to read?

I want to upgrade from Photoshop Elements 5 to Lightroom 5. Can Lightroom 5 read/convert a Photoshop Elements 5 catalog including all of the tags, captions, etc, or is Elements 5 too old for Lightroom 5 to read/convert? What's the best way to migrate? (My catalog has over 100k images in it.)

Adobe changed the catalog software from PSE6 onwards to the SQLite database – as used in Lightroom.
Earlier versions of PSE including PSE5 used a Microsoft Access database, stored in a file called [Catalog Name].psa.
If you have already embedded keywords and captions by writing file info into the images they should be readable even if catalog conversion fails. Lightroom does have the ability to import a PSE catalog but in view of the age of PSE5 I would recommend downloading the 30 day free trial of LR5.6 and then you can judge the level of success of catalog conversion.
http://www.adobe.com/products/photoshop-lightroom.html

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine until I deleted an app in error. When I downloaded it from iTunes, my account is no longer recognized by the app's host servers. Can I go back and re-sync one app from my old phone?

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
Shubhada

SAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH

Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0

Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
Steffan

Public Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
    strFileName = EplanSet!path & EplanSet!File
    If AcroAVDoc.Open(strFileName, vbNull) <> True Then
        Exit Function
    End If
    Set AcroAVDoc = AcroApp.GetActiveDoc
    Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions!

Upgrade from R/3 4.6C to ECC 6.00 : languages

Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French       for component EA-APPL
- French       for component EA-DFPS
- French       for component EA-FINSERV
- French       for component EA-GLTRADE
- French       for component EA-HR
- French       for component EA-IPPE
- French       for component EA-PS
- French       for component EA-RETAIL
- French       for component ECC-DIMP
- French       for component ERECRUIT
- French       for component FI-CA
- French       for component FI-CAX
- French       for component FINBASIS
- French       for component INSURANCE
- French       for component IS-CWM
- French       for component IS-H
- French       for component IS-M
- French       for component IS-OIL
- French       for component IS-PS-CA
- French       for component IS-UT
- French       for component LSOFE
- French       for component PI_BASIS
- French       for component SAP_ABA
- French       for component SAP_AP
- French       for component SAP_APPL
- French       for component SAP_BASIS
- French       for component SAP_BW
- French       for component SAP_HR
- French       for component SEM-BW
- French       for component ST-PI
- Dutch        for component EA-APPL
- Dutch        for component EA-DFPS
- Dutch        for component EA-FINSERV
- Dutch        for component EA-GLTRADE
- Dutch        for component EA-HR
- Dutch        for component EA-IPPE
- Dutch        for component EA-PS
- Dutch        for component EA-RETAIL
- Dutch        for component ECC-DIMP
- Dutch        for component ERECRUIT
- Dutch        for component FI-CA
- Dutch        for component FI-CAX
- Dutch        for component FINBASIS
- Dutch        for component INSURANCE
- Dutch        for component IS-CWM
- Dutch        for component IS-H
- Dutch        for component IS-M
- Dutch        for component IS-OIL
- Dutch        for component IS-PS-CA
- Dutch        for component IS-UT
- Dutch        for component LSOFE
- Dutch        for component PI_BASIS
- Dutch        for component SAP_ABA
- Dutch        for component SAP_AP
- Dutch        for component SAP_APPL
- Dutch        for component SAP_BASIS
- Dutch        for component SAP_BW
- Dutch        for component SAP_HR
- Dutch        for component SEM-BW
- Dutch        for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancel

Hi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel

Slow table creation after upgrade from 10.2.0.3 to 11.2.0.1 using DBUA

I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
    l_str varchar2(255);
    l_job number;
begin
    if ( ora_dict_obj_type = 'TABLE' ) then
        l_str := 'execute immediate "grant select on ' ||
                                     ora_dict_obj_name ||
                                    ' to select_role";';
        dbms_job.submit( l_job, replace(l_str,'"','''') );
    end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME                                 TYPE        VALUE
optimizer_capture_sql_plan_baselines boolean     FALSE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      11.2.0.1
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
optimizer_secure_view_merging        boolean     TRUE
optimizer_use_invisible_indexes      boolean     FALSE
optimizer_use_pending_statistics     boolean     FALSE
optimizer_use_sql_plan_baselines     boolean     TRUE
SQL> show parameter db_file_multi
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     8
SQL> show parameter db_block_size
NAME                                 TYPE        VALUE
db_block_size                        integer     8192
SQL> show parameter cursor_sharing
NAME                                 TYPE        VALUE
cursor_sharing                       string      EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME                PNAME                     PVAL1 PVAL2
SYSSTATS_INFO        STATUS                          COMPLETED
SYSSTATS_INFO        DSTART                          03-11-2010 16:33
SYSSTATS_INFO        DSTOP                           03-11-2010 17:03
SYSSTATS_INFO        FLAGS                         0
SYSSTATS_MAIN        CPUSPEEDNW           713.978495
SYSSTATS_MAIN        IOSEEKTIM                    10
SYSSTATS_MAIN        IOTFRSPEED                 4096
SYSSTATS_MAIN        SREADTIM               1565.746
SYSSTATS_MAIN        MREADTIM
SYSSTATS_MAIN        CPUSPEED                   2310
SYSSTATS_MAIN        MBRC
SYSSTATS_MAIN        MAXTHR
SYSSTATS_MAIN        SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          4           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.00       0.00          0          0          4           0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date,       a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid,      p.last_enabled_time
last_enabled_time, p.instance_id instance_id,      1 sch_job   from
sys.scheduler$_job p   where bitand(p.job_status, 3) = 1    and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0))    and bitand(p.flags, 4096) = 0    and
p.instance_id is NULL    and (p.class_oid is null      or (p.class_oid is
not null      and p.class_oid in (select b.obj# from sys.scheduler$_class b
                           where b.affinity is null)))   UNION ALL   select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1   from sys.scheduler$_lightweight_job
q   where bitand(q.job_status, 3) = 1    and ((bitand(q.flags, 134217728 +
268435456) = 0) or         (bitand(q.job_status, 1024) <> 0))    and
bitand(q.flags, 4096) = 0    and q.instance_id is NULL    and (q.class_oid
is null      or (q.class_oid is not null      and q.class_oid in (select
c.obj# from sys.scheduler$_class c                          where
c.affinity is null)))   UNION ALL   select j.job, 0,
from_tz(cast(j.next_date as timestamp),      to_char(systimestamp,'TZH:TZM')
), 1, NULL,      from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')),     NULL, 0   from sys.job$ j   where
(j.field1 is null or j.field1 = 0)    and j.this_date is null) a   order by
1)   where rownum = 1
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        1      0.47       0.47          0       9384          0           1
total        3      0.48       0.48          0       9384          0           1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS   (recursive depth: 1)
Rows     Row Source Operation
      1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
      1   VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
      1    SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790     VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790      UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
    231       FILTER (cr=68 pr=0 pw=0 time=920 us)
    231        TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
      1        TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
      1         INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
      0       FILTER (cr=3 pr=0 pw=0 time=0 us)
      0        TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
      0        TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
      0         INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559       TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      2      0.00       0.00          0          0          4           0
Fetch        0      0.00       0.00          0          0          0           0
total        3      0.00       0.00          0          0          4           0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       70      0.00       0.00          0          0          0           0
Execute     85      0.01       0.01          0         62        208          37
Fetch       49      0.48       0.49          0       9490          0          35
total      204      0.51       0.51          0       9552        208          72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
   35 user SQL statements in session.
   53 internal SQL statements in session.
   88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
       1 session in tracefile.
      35 user SQL statements in trace file.
      53 internal SQL statements in trace file.
      88 SQL statements in trace file.
      51 unique SQL statements in trace file.
    1590 lines in trace file.
      18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME                                 TYPE        VALUE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      10.2.0.3
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
optimizer_secure_view_merging        boolean     TRUE
SQL> show parameter db_file_multi
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     8
SQL> show parameter db_block_size
NAME                                 TYPE        VALUE
db_block_size                        integer     8192
SQL> show parameter cursor_sharing
NAME                                 TYPE        VALUE
cursor_sharing                       string      EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME                PNAME                     PVAL1 PVAL2
SYSSTATS_INFO        STATUS                          COMPLETED
SYSSTATS_INFO        DSTART                          09-24-2007 11:09
SYSSTATS_INFO        DSTOP                           09-24-2007 11:09
SYSSTATS_INFO        FLAGS                         1
SYSSTATS_MAIN        CPUSPEEDNW           2110.16949
SYSSTATS_MAIN        IOSEEKTIM                    10
SYSSTATS_MAIN        IOTFRSPEED                 4096
SYSSTATS_MAIN        SREADTIM
SYSSTATS_MAIN        MREADTIM
SYSSTATS_MAIN        CPUSPEED
SYSSTATS_MAIN        MBRC
SYSSTATS_MAIN        MAXTHR
SYSSTATS_MAIN        SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
   ALLIANCEID           NUMBER(10)                      not null,
   NAME                 VARCHAR2(40)                    not null,
   CREATION_DATE        DATE,
   constraint PK_ALLIANCE primary key (ALLIANCEID)
           using index
       tablespace LIVE_INDEX
tablespace LIVE_DATA
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.01          0          2         16           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.01       0.01          0          2         16           0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.02          0          0          0           0
Execute      1      0.00       0.00          0          2         16           0
Fetch        0      0.00       0.00          0          0          0           0
total        2      0.00       0.02          0          2         16           0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       65      0.01       0.01          0          1         32           0
Execute     84      0.04       0.09         20         90        272          35
Fetch       88      0.00       0.10         30        281          0          64
total      237      0.07       0.21         50        372        304          99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
   10 user SQL statements in session.
   76 internal SQL statements in session.
   86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
       1 session in tracefile.
      10 user SQL statements in trace file.
      76 internal SQL statements in trace file.
      86 SQL statements in trace file.
      43 unique SQL statements in trace file.
     949 lines in trace file.
       0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PM

So while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table."

Upgrade from PSE5

Similar Messages

Maybe you are looking for