UPGRADE from retired MS-7222 to Intel Core-iX / Pentium boards

Dear all,
I would like to ask you if it possible to replace my retired MS-7222 motherboard with a new generation motherboard certified for Windows 8 (supporting Intel Core i3 or Pentium D) without the need of replacing also the peripherals (hard disk, power supply, DVD, Screen, keyboard, mouse).
Thank you in advance,
Best Regards
Athina from Athens
 

Quote from: Sea Dog on 29-January-14, 05:04:42
In modern times, SATA drive is considered an IDE drive. IDE Mode of the modern controller - IDE, AHCI, RAID. IDE relates to both PATA and SATA drives. Terminology can be misleading at times.
A SATA drive is not an IDE drive.
Many people get fooled by a Windows "legacy".
http://en.wikipedia.org/wiki/Serial_ATA
If AHCI is not enabled by the motherboard and chipset, SATA controllers typically operate in "IDE emulation" mode
Windows device drivers that are labeled as SATA are often running in IDE emulation mode unless they explicitly state that they are AHCI mode,
in RAID mode, or a mode provided by a proprietary driver
In any case, you are right: "The PATA (flat cable) devices will not work on the newer boards".

Similar Messages

  • Can I upgrade my processor 2.4 GHz Intel Core 2 Duo to 2.66 GHz Intel Core 2 Duo

    Can I upgrade my MacBook Pro (Spring 2010 Edition) from a  2.4 GHz Intel Core 2 Duo processor to a  2.66 GHz Intel Core 2 Duo?  Where is the best place to have this done?  Can I get a credit for my 2.4 GHz Intel Core 2 Duo Processor or sell it on line?
    Model Name:
    MacBook Pro
      Model Identifier:
    MacBookPro7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.4 GHz
      Number of Processors:
    1
      Total Number of Cores:
    2
      L2 Cache:
    3 MB
      Memory:
    8 GB
      Bus Speed:
    1.07 GHz
      Boot ROM Version:
    MBP71.0039.B0B
      SMC Version (system):
    1.62f6
      Serial Number (system):
    W8024Q4EATM
      Hardware UUID:
    1EB19DF4-1AF2-52F4-BBCD-52C847653B2F
      Sudden Motion Sensor:
      State:
    Enabled

    I was to ask the same with my processor. I just upgraded my hard drive to 750GB, and replaced my battery, but I am still getting the spinning beachball.  Im happy to just replace the processor if this ball goes away.  I do have 250GB free on it. and Im not doing much with this machine other than the occasional iMovie render.
      Model Name:
    MacBook Pro
      Model Identifier:
    MacBookPro6,2
      Processor Name:
    Intel Core i5
      Processor Speed:
    2.4 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache (per core):
    256 KB
      L3 Cache:
    3 MB
      Memory:
    4 GB
      Processor Interconnect Speed:
    4.8 GT/s
      Boot ROM Version:
    MBP61.0057.B0C
      SMC Version (system):
    1.58f16
      Serial Number (system):
    W8*******AGX
      Hardware UUID:
      Sudden Motion Sensor:
      State:
    Enabled
    So, same story for me too?  No way to go up? But a replacement is ok?
    Cheers, and thanks kindly in advance.
    Dan
    <Edited by Host>

  • Is it possible to upgrade a macbook 2.16 ghz intel core 2 duo to OSX 10.8.5?

    I have an old mackbook, approx 2007 era. Is it possible to upgrade a macbook 2.16 ghz intel core 2 duo to OSX 10.8.5?

    You can only upgrade to 10.7 Lion. Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. Or go to http://store.apple.com/us/product/D6106Z/A/os-x-lion and purchase it there. The price is $19.99.
    You will have to be at 10.6.8 first.
    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. After you’ve installed that then use the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
    You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
    http://en.wikipedia.org/wiki/3_GB_barrier
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
    OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/

  • Will ram from a MacBook 1.83GHz Intel Core Duo work on a MacBook 2.0GHz Int

    Will ram from a MacBook 1.83GHz Intel Core Duo work on a MacBook 2.0GHz Intel Core 2 Duo?
    MACBOOK   Mac OS X (10.4.8)  

    Yes, both machines use the same type of memory.

  • Can I upgrade my 2006 iMac4,1 with Intel Core Duo with 1.5GB memory, 667MHz Bus Speed, 2GHz processor from 10.4.11 to the newer OS systems? I've been told my machine is now "vintage" or obsolete...

    Can I upgrade my 2006 iMac 4,1 with Intel Core Duo w/1/5GB memory, 667GHz Bus Speed, 2GHz Processor Speed to the newer OS systems?
    I have been told my machine is now "vintage or obsolete" and can't be upgraded to the newest OS software.

    The maximum OS for that iMac is 10.6.8.
    (64450)

  • RAM upgrade for MBP 2.2 GHz Intel Core 2 Duo

    I have a MBP 2.2 GHz Intel Core 2 Duo currently with 2 GB of RAM and with all the work I do on it I would like to upgrade to 4 GB. Purchasing the RAM through Apple is out of the question because it so expensive.
    I would like to know what is the best brand to buy and on what website.. Is an upgrade to 4 GB possible for my MBP? It looks like I have my "Bank 0/DIMM0" filled with 1 GB DDR2 SDRAM 667 MHz and my "Bank 1/DIMM1" filled with the same thing. Does this mean that both of my RAM slots are full AND if I want to upgrade my RAM I'll have to purchase 2 sets of 2 GB RAM? Please help as I am new to all of the tech stuff...
    Another side note... I've noticed that some discussions have stated that some MBP are only upgradable to 3 GB of RAM, but I'm pretty sure that I can upgrade mine to 4 GB of RAM. Can anyone shed any light on this?
    Your help is much appreciated...

    yes, both of your RAM slots are full, so to get 4GB you will have to get 2 2GB sticks. Having the same model I can safely assure you that it will recognize all 4GB of the new Ram.
    as for brands, there have been many I have seen recommended on this board, but one name seems to pop up consistently is Kensington, I picked up my ram from the store I bought my laptop at, so I couldn't recommend a site, sorry

  • Things to consider when moving from Motorola Dual G5 to Intel Core Duo G5

    OK dear forum readers,
    I am planning on upgrading my PowerMac G5 Dual 2.0 to the Intel Core Duo platform. I have no idea where to start. So I am looking for suggestions/short list of what I need to do once I have both computers sitting next to each other. Do I need a cable? Do I need to buy additional software? Just as an FYI I do not backup to .Mac or anything. Though I do regularly do a PSyncX backup to an external hard-drive.
    Your help is greatly appreciated.
    Regards,
    Max
    Power MAC G5 Dual 2.0, 30" ACD, RADEON X8000XT card   Mac OS X (10.4.4)   I also have a IMAC G5

    You can totally bring your Intel to its knees if you merge PPC code, files, caches and such over.
    CoreDuo sounds like iMac (not Mac Pro) so you can't just pull the drive and plug it in. There are SATA cases with FW and SATA interface of course. If you are selling the G5, I'd keep the drive and keep my files. I'd use your backup drive and Migration Assistant .... very caustiously... and reinstall applications.
    Cache folders, drivers, anything that goes into the top level Library and System/Library should not be reinstalled.
    Not all programs that are PPC work under Rosetta.
    MacIntouch and Macfixit have lists of what is compatible or is in UB native format.

  • Replacing/Upgrading the 15" 2.16 GHz Intel Core 2 Duo MacBook Pro HDD?

    I was wondering if it is possible to replace the 15" 2.16 GHz Intel Core 2 Duo MacBook Pro HDD from a 5400 RPM to a 7200 RPM. I plan on recording using Logic Pro so I will most likely need a faster hard drive. If so, what are some good, compatible hard drives to look into.
      Mac OS X (10.4.9)  

    As asked here perhaps 1000 times a day, and findable
    with a simple search you can, but you can void your
    warranty if you don't do it right and there is some
    work involved. Spare the grief and get an external
    drive with a fast 2.5" drive in it and add to your
    capacity the entire value vs. the difference.
    It is very tiring to see you respond to everyone who asks this question with "get an external drive". I'm sure there are a lot of people out there who want more storage WITHOUT having to tote extra gear around.
    Yes external drives are useful, but they don't answer the question asked.
    MacBook Pro 15" Mac OS X (10.4.9) C2D 2.16Ghz, 2GB RAM, 120GB HDD, X1600 128MB, 15" Matte

  • Upgrading from a 20" G5 to Intel Quad Core

    I'm considering the purchase of a new iMac 27". I'm wondering if most of my work on this computer is transferable, photos, movies, Appleworks, Final Cut Express 3.5.

    User data is generally usable on a new iMac, as long as the application that created the document runs on the new iMac.
    AppleWorks is an old PowerPC program. On an Intel Mac, it will run using a translation feature called Rosetta, and people have reported here that it still works fine. It should be possible to open AppleWorks documents using iWork, Apple's current office suite (a separate purchase).
    Most older software that are PowerPC apps will work using Rosetta, but if there is a more current Universal or Intel version of the app available, you should switch to it.

  • Photographer upgrading from Dual 2.5Ghz to 8 core

    Hi there. I hope someone can help me with this dilemma. I am a photographer who has been working with jpg's since the inception of digital photography. I am now at the point where I want to switch to RAW (bigger better files) as memory and storage prices now make this an affordable option.
    The machine I have at the minute is a dual 2.5Ghz with 4.5Gb of RAM and an ATI Radeon 9800 256MB graphics card. It is just a bit slow when processing RAW in Adobe Lightroom to the point where I'm always waiting for it to catch up with my adjustments of large batches of files.
    The question is --- will an 8 core Mac Pro make a big difference and if yes then what would be the ideal configuration be to make it work the fastest?
    After reading the post by Badlydrawnboy and in-depth answers, I think it is a no-brainer as to how to arrange disks. So I guess this question is all about machine specs.
    Any help appreciated.
    Al

    Having moved from the quad G5 to this machine i have noticed a large improvement in speed, particularly in Aperture. The graphics card determines to a large extent the performance of Aperture. So if moving to the MacPro, order the x1900. Stripe 0 your library across 2/3 of the internal drives (WD Raid edition 2's with 500 or 750GB'ers).
    My test raw file took ~2m20s to render full screen and on my MP its 20s. If you edit in Aperture mostly in order of the adjustments showing within the HUD you will be very impressed.
    Intel will be launching new procs within the next 6 months, with a 1600MHz Front side bus, over todays octo xenon's 1300MHz and more on-chip cache. If they make their way into MP's then there should be another speed bump.
    But its an if/or when scenario. Today's octo MP is quite a beast and i'm hoping the core-swapping of Tiger is improved with Leopard. Also hope that Aperture's next release becomes more threaded (unlike search's solo-core task!).
    I can heartily reccommend the MP and in particular the octo for Aperture and video work. Read the forums for optimal memory configuration, particularly Hatters and Ned's comments.

  • I recently updated the original ram from my 2.66 Ghz Intel Core i7 15" laptop. Can I take that ram (4GB set) and put in my iMac 2.4GHz Intel Core 2 Duo?

    The 15" power book had this:
    Memory Type: DDR3 PC3-8500, DDR3 (non-ECC)
    The 20" iMac has this:
    Memory Type: DDR2 PC2-5300, DDR2 (non-ECC)
    I'm not sure what the difference between DDR3 and DDR2 is. Any support would be great.

    DDR stands for Double Data Rate, the original DDR had a speed of 266MHz, double the rate of the previous memory standard of SDRAM which ran at 133MHz.  DDR2 and then DDR3 are the successors of DDR.  To avoid fitting the wrong type of module they use different memory slots and will only fit the one they were designed for, by way of slots cut in the memory boards at precise positions which correspond to notches in the memory slots.
    If you want to know what memory will fit which computer I would go to the Crucial website and use their online Memory Advisor, put in the brand and model, it will tell you exactly which modules fit it and what kits (if any) Crucial have available for it.
    http://www.crucial.com/

  • I just upgraded to a 2.7 Ghz Intel Core i7 with 4GB of RAM and my GarageBand file still says "Too many instruments to play."

    The title says it all. I'm using the latest version of GB on Snow Leopard. All tracks are locked. Why can't this new machine handle an 8GB GargeBand session?

    rsherid wrote:
     deleting preferences and repairing transmissions [...] how to do that?
    http://www.bulletsandbones.com/GB/Tutorials.html#deleteprefs
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Can't upgrade from 10.8 to 10.8.1 on Macbook Pro 17" 2.93 GHz Intel Core 2 Duo

    When I try and upgrade on my 2.93 GHz Intel Core 2 Duo 17" from 10.8 to 10.8.1 there is no update in Software Update/App Store.
    So I have downloaded the 10.8.1 patch from http://support.apple.com/kb/DL1571 it says that my machine "OSX Update can't be installed on this disk. This volume does not meet the requirments for this update."
    I had no problems updating with my iMac to 10.8.
    Anyone know if this a problem or is 10.8.1 update for certain models?
    Thanks in advance.

    If I understand correctly you seem to be getting kernel panics. These can be caused from software and sometimes hardware. You can try the normal list of things. Reset the SMC, PMU, create a another user account and run in that account to see if the problem occurs. Also try repairing permissions from the original disc. you should also look at your battery information to see what the health of the battery is. You can do this via system profiler. I would also run Hardware test from the second install disc that came with your computer. This could help you rule out any hardware problems. Ram can be hard to troubleshoot since it can work fine one minute and not work the next. Also sometimes the hardware test can come up with false problems. I always note the problem and run the test a second time to make sure it was not a false error. If all those things do not fix the problem, I would consider doing a archive and install. This way you could rule out a software problem.
    Instead of sending it in I suggest you take it to your local apple store if there is one close to you. They sometimes get repairs done faster.
    Message was edited by: mac wise

  • Mac Mini Intel Core 2 Duo - 2.0GHz Mid 2007 RAM upgrade

    Hello
    I'm looking to upgrade the RAM in my 2007 Intel Core 2 Duo - 2.0GHz Mini - I've gone to the Crucial website and it's recommended via the scanner software on there, a 2GB kit (2 x 1GB sticks - http://www.crucial.com/uk/store/mpartspecs.aspx?mtbpoid=C8AF5484A5CA7304) however I thought that this model could handle up to 4GB (although only "see" 3GB), yet the Crucial site says that the 4GB kit from here http://www.crucial.com/uk/store/partspecs.aspx?IMODULE=CT2KIT25664AC667 isn't suitable for use?
    Is their site wrong on this matter or is there a specialised 4GBG kit they produce for the Mac Mini?
    TIA!

    Crucial sticks to official maximums given by the manufacturer. This is because they don't want to get ensnared in support issues when firmware updates are required or when you don't see the literal full amount of memory the hardware (sticks of RAM) supply.
    Other World Computing is more helpful in this regard, and guarantees their memory just as well as Crucial does.
    http://www.macsales.com/
    You have to weigh which is a more effective solution for you.

  • Steps to uninstall from iMac (Intel Core i7) MacKeeper 1.8.1

    What steps should I take to uninstall from iMac (3.4 GHz Intel Core i7 with OS X 10.9.4 /  8 Ram) MacKeeper 1.8.1? I saw something similar on the site, but it's a different version not stored in the Library files. Instead MacKeeper is in the Applications file, so can I just dump it in the trash to be gone with it or do I have to have an uninstaller? Thanks!, and sorry if this is a redundant question.

    How to Remove MacKeeper
    Helpful Links Regarding Malware Problems
    If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and The Safe Mac » Adware Removal Tool. Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
      Mac OS X Snow Leopard and malware detection
      OS X Lion- Protect your Mac from malware
      OS X Mountain Lion- Protect your Mac from malware
      OS X Mavericks- Protect your Mac from malware
      About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
    From user Joe Bailey comes this equally useful advice:
    The facts are:
    1. There is no anti-malware software that can detect 100% of the malware out there.
    2. There is no anti-malware that can detect anything targeting the Mac because there
         is no Mac malware in the wild, and therefore, no "signatures" to detect.
    3. The very best way to prevent the most attacks is for you as the user to be aware that
         the most successful malware attacks rely on very sophisticated social engineering
         techniques preying on human avarice, ****, and fear.
    4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
        your computer is intended to entice you to install their malware thinking it is a
        protection against malware.
    5. Some of the anti-malware products on the market are worse than the malware
        from which they purport to protect you.
    6. Be cautious where you go on the internet.
    7. Only download anything from sites you know are safe.
    8. Avoid links you receive in email, always be suspicious even if you get something
        you think is from a friend, but you were not expecting.
    9. If there is any question in your mind, then assume it is malware.

Maybe you are looking for

  • X305-q706 Stuck on splash screen where is says "Qosmio" with please wait...

    Hi, recently bought a Qosmio x305-Q706. First time I booted it up it gets to the splash screen with Qosmio displayed with "please wait" at the bottom and hangs there forever. The only way I can get it to boot is to cold boot it and mash the F12 key w

  • So ANNOYED! I changed my apple id and it wont update on my app store. Now I can't download anything.

    Not sure what is going on. I changed my apple id, made the new one my only apple id. And my iPad won't recognize it. It is still using my old one especially in the app store. It won't change at all. Anyone have suggestions?

  • Method of Fetching a special character

    hi expert i have  ascenario g_data = 12@456&3_a^ !. i have to fetch the special character in the particulat field  !! any functional module is available . r any other method available

  • 251 movement type

    Anybodt used 251 movement type? ie GI for sales without sales order? Can any body explain the process and business scenario? Can we do billing against the material doc created through 251 mvt type? Explanatory reply will be awarded full point. Regard

  • Always error when try to save my item type on workflow builder

    Dear All, I'm created a simple workflow. There is a notification with Result Type = Approval (Standard). Every I tried to save, workflow builder show a error message below: WFDESV_FAIL COUNT=1 WFACTV_FAIL OPERATION=SAVE NAME=FIF_NOTIFY_APPROVER1_NTF