Upgrade from RH 7 to RH9
Hello All,
I have just installed the trial version of RH9 and now I cannot open my files... the following error message is displayed:
Error in reading RHFrameStyleMapping.apj file
Then, ... unable to load database for ... cpd
I have made some research on this topic but could not find the solution...any suggestions or advise?
Waiting for your answer...
Thanks a lot in advance.
LIke I said, you must backup your RoboHelp 7 projects before upgrading. I recommend that is done with a zip file so that you cannot open it in error.
When I upgrade I keep a copy in the old format. If the new version copy goes belly up, I can revert to the old version.
Also I would recommend you run the trial on a machine other than your production machine. Less trouble if you decide not to upgrade.
I doubt uninstalling and reinstalling will fix the problem you encountered as that is about missing / corrupt files in the project.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Similar Messages
-
Considering upgrading from RH6 to RH9...
I am considering upgrading from RoboHelp 6 to RH9; I have 40+ projects merged into a main project -- will they present a problem?
thanx,
LonIn the words of the younger set: "Duh!" Okay, silly question; what should have asked was:
Do I open RH 9, then open each of these projects, one at a time, to upgrade them? (Maybe this is a silly question, too.)
lr -
Missing Snippet Descriptions (upgraded from RH7 to RH9)
Hi all,
I've pretty much successfully upgraded my RH7 project to RH9. I only noticed two problems, one of which is the subject of this thread - the descriptions for each of my snippets isn't displaying. It looks to me like this problem has something to do with the way descriptions were previously stored (in a title tag for RH7 and lower versions?) versus the way the descriptions are now stored (in a meta tag, i think, for RH8 and higher versions?).
I took a look at the hts file for one of my snippets that was upgraded from RH7 to RH9. The code looks like this (I've bolded the snippet description):
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="generator" content="Adobe RoboHelp 9" />
<title>Use this text above the table that explains Action menu items.</title>
</head>
<body>
<p style="margin-top: 2pt; margin-bottom: 2pt;">Select an action from the
menu and click Go. </p>
<p style="margin-top: 2pt; margin-bottom: 2pt;"> </p>
<p style="margin-top: 2pt; margin-bottom: 2pt;"><span class="NoteTitle">Note:</span>
The Action menu may change depending on the content, the content's status,
your permissions and what you have already accessed. Therefore, the options
explained below may not all be available at the same time.</p>
</body>
</html>
THEN, I created a brand new snippet in RH9. The code looks like this:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="topic-comment" content="this is a new test snippet" />
<title>New Snippet</title>
<meta name="generator" content="Adobe RoboHelp 9" />
</head>
<body>
<p>This is placeholder text for your snippet. To add content to the body,
replace this text. </p>
<p> </p>
<p>For information about applying snippets to topics, press <b>F1</b>.</p>
</body>
</html>
Notice how the description for the brand new snippet starts with "<meta name" but for the snippet that was created in RH7 (and then automatically upgraded by RH9), the description for the snippet starts with "<title>".
I have 101 (exact count) snippet files and would hate to have to go into each one and modify this line of code myself, so my question is this: Does anybody know a good, faster way to 'upgrade' all of my hts (snippet) files to follow the new RH9 format?
Here are two things I've tried:
1. Using TextPad, I manually made the change in the .hts file. Result: The description still does not display in the Description column in the Snippets pod (on the left in the screenshot below), but it DOES display in the Snippet Properties window (on the right in the screenshot below).
2. Copying the description from TextPad, then opening the Properties window for the snippet and pasting the description into the Description field, and saving the snippet. This WORKS...but I'll have to do it 100 more times to fix all my snippets, AND the Title tag still ends up being incorrect. Although things LOOK correct in the Properties window (i.e., the Name field indicates the correct name for the snippet, and the Description field now contains the correct description), here's the resulting code:
<meta name="topic-comment" content="Use this text as the explanation for the Add To Cart Action menu option." />
<title>Use this text as the explanation for the Add To Cart Action menu option.</title>
So, the meta and title tags end up having the same values! The title tag should say "Add To Cart" - I don't know how it's possible that it doesn't contain this text as the value for the title tag. Thus, it seems like in order to get the descriptions in there correctly, I have to do a copy, then paste into the Properties window in RH9, but to correct the Title tags I have to open the .hts files in a text editor (i.e., *outside* of RH9) and enter the correct title text for each snippet. Is this really going to be this time-consuming to fix?Let's try again.
First forget thinking in INCLUDE mode. Everything will be included unless you exclude it.
Example.
Topic 1 has tag A applied to the topic
Topic 2 has tag B applied to the topic
Topic 3 has tag A applied to some of the content (let's say to the word Redrabbit) but not the topic itself.
Topic 4 has the tag A applied to the word Redrabbit and tag B to the word Greenrabbit but no tag on the topic itself.
This is how it should work.
Topic
Topic tag
Text tagged
Expression Not A
Expression Not B
Expression Not A and Not B
Header 6
1
A
Topic will be excluded
Topic be in output
Topic will be excluded
2
B
Topic be in output
Topic will be excluded
Topic will be excluded
3
None
Redrabbit is tagged A
Topic will be in output but the word Redrabbit will be excluded
Whole topic will be in output including the word Redrabbit.
Topic will be in the output but the words Redrabbit and Greenrabbit will be excluded.
4
None
Redrabbit is tagged A and Greenrabbit is tagged B
Topic will be in output but the word Redrabbit will be excluded
Topic will be in the output but the word Greenrabbit will be excluded.
Topic will be in the output but the words Redrabbit and Greenrabbit will be excluded.
Below is the expression dialog.
Here I have selected from Available Tags and put them in Exclude.
Click Advanced and you will see how RH writes the expression.
Written like that, does it now work for you?
See www.grainge.org for RoboHelp and Authoring tips -
Upgrading from RoboEngine 3.1 to RoboHelp Server 9
Old-time user, new ID. My company recently upgraded from RoboHelp 4 to RoboHelp 9. (Yes, we're slow about some things.) I was recently asked to upgrade our WebHelp Pro output, which had been posted to an old RoboEngine 3.1 server. Of course, the new RoboHelp 9 output does not play well with RE 3.1, and I got a "RoboHelp Engine server is not available" message when I attempted to upgrade the output. After doing a little research, I discovered that this lack of backward compatibility began with RoboHelp 7.
Fortunately, I made backups of my old WebHelp Pro output, and our users can still access the Help files. But I've been tasked with researching the upgrade path from our old version to the new one. So here's what I'd like to know:
Is buying RoboHelp Server 9 sufficient?
Is the process of publishing the Help files to the server reasonably similar?
The server that hosts RE 3.1 is a Windows 2000 machine. Will I be able to run RH Server 9 on it?
Will I need to provide new URLs for the Help links inside our Internet-based software after the upgrade, or will the old links, which use the format http://machine.org/roboapi.asp?project=ProjectName, still work?
Thanks in advance for your help. Nice to see that Rick, Colum, and Peter are still firing the big guns around here. I feel strangely reassured, as if everything will work out just fine
ChetWelcome back Chet. I nearly typed the obligatory "Welcome to the RH forums" greeting when I saw your single post but that doesn't seem right here
The issue here is that the underlying RoboHelp and RoboHelp Server code was completely rewritten in Java. Personally I'm surprised you managed to get RH9 output running on RE 3.1 at all. It just goes to show what a error tolerant application it is.
You'd be far better off upgrading both the client and the server applications. I think you'll be surprised at just how easy RHServer is to install and use these days. No more fiddling with permissions. As for publishing, you still have a WebHelp Pro SSL in RH9. It does have some additional options and the UI of the RH Server application will have changed also. There is a lot of new functionality. You may find that the URL for the help is different though. There is an excellent guide that is worth reading called the RoboHelp Server Reviewers Guide. You can find it here and it will answer a lot of your questions.
One thing you may want to consider is migrating the data from RE3.1 to RHServer 9. The new app has a migration tool that can migrate from an earlier release. However I am not sure if it could cope with data from RE3.1. You could try, and it is doesn't get the data into the new database with SQL.
Colum -
I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
-
Is it really possible to upgrade from a Treo 650 to a Treo 750?
I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T) -
I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?
Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314 -
I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H. -
Can't print from IE 8 after upgrading from Vista to Windows 7
My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff -
Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0
Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
ShubhadaSAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH -
Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0
Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
SteffanPublic Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
strFileName = EplanSet!path & EplanSet!File
If AcroAVDoc.Open(strFileName, vbNull) <> True Then
Exit Function
End If
Set AcroAVDoc = AcroApp.GetActiveDoc
Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions! -
Upgrade from R/3 4.6C to ECC 6.00 : languages
Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French for component EA-APPL
- French for component EA-DFPS
- French for component EA-FINSERV
- French for component EA-GLTRADE
- French for component EA-HR
- French for component EA-IPPE
- French for component EA-PS
- French for component EA-RETAIL
- French for component ECC-DIMP
- French for component ERECRUIT
- French for component FI-CA
- French for component FI-CAX
- French for component FINBASIS
- French for component INSURANCE
- French for component IS-CWM
- French for component IS-H
- French for component IS-M
- French for component IS-OIL
- French for component IS-PS-CA
- French for component IS-UT
- French for component LSOFE
- French for component PI_BASIS
- French for component SAP_ABA
- French for component SAP_AP
- French for component SAP_APPL
- French for component SAP_BASIS
- French for component SAP_BW
- French for component SAP_HR
- French for component SEM-BW
- French for component ST-PI
- Dutch for component EA-APPL
- Dutch for component EA-DFPS
- Dutch for component EA-FINSERV
- Dutch for component EA-GLTRADE
- Dutch for component EA-HR
- Dutch for component EA-IPPE
- Dutch for component EA-PS
- Dutch for component EA-RETAIL
- Dutch for component ECC-DIMP
- Dutch for component ERECRUIT
- Dutch for component FI-CA
- Dutch for component FI-CAX
- Dutch for component FINBASIS
- Dutch for component INSURANCE
- Dutch for component IS-CWM
- Dutch for component IS-H
- Dutch for component IS-M
- Dutch for component IS-OIL
- Dutch for component IS-PS-CA
- Dutch for component IS-UT
- Dutch for component LSOFE
- Dutch for component PI_BASIS
- Dutch for component SAP_ABA
- Dutch for component SAP_AP
- Dutch for component SAP_APPL
- Dutch for component SAP_BASIS
- Dutch for component SAP_BW
- Dutch for component SAP_HR
- Dutch for component SEM-BW
- Dutch for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancelHi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel -
I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
l_str varchar2(255);
l_job number;
begin
if ( ora_dict_obj_type = 'TABLE' ) then
l_str := 'execute immediate "grant select on ' ||
ora_dict_obj_name ||
' to select_role";';
dbms_job.submit( l_job, replace(l_str,'"','''') );
end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.2.0.1
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
optimizer_use_invisible_indexes boolean FALSE
optimizer_use_pending_statistics boolean FALSE
optimizer_use_sql_plan_baselines boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 03-11-2010 16:33
SYSSTATS_INFO DSTOP 03-11-2010 17:03
SYSSTATS_INFO FLAGS 0
SYSSTATS_MAIN CPUSPEEDNW 713.978495
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM 1565.746
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED 2310
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date, a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid, p.last_enabled_time
last_enabled_time, p.instance_id instance_id, 1 sch_job from
sys.scheduler$_job p where bitand(p.job_status, 3) = 1 and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0)) and bitand(p.flags, 4096) = 0 and
p.instance_id is NULL and (p.class_oid is null or (p.class_oid is
not null and p.class_oid in (select b.obj# from sys.scheduler$_class b
where b.affinity is null))) UNION ALL select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1 from sys.scheduler$_lightweight_job
q where bitand(q.job_status, 3) = 1 and ((bitand(q.flags, 134217728 +
268435456) = 0) or (bitand(q.job_status, 1024) <> 0)) and
bitand(q.flags, 4096) = 0 and q.instance_id is NULL and (q.class_oid
is null or (q.class_oid is not null and q.class_oid in (select
c.obj# from sys.scheduler$_class c where
c.affinity is null))) UNION ALL select j.job, 0,
from_tz(cast(j.next_date as timestamp), to_char(systimestamp,'TZH:TZM')
), 1, NULL, from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')), NULL, 0 from sys.job$ j where
(j.field1 is null or j.field1 = 0) and j.this_date is null) a order by
1) where rownum = 1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.47 0.47 0 9384 0 1
total 3 0.48 0.48 0 9384 0 1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS (recursive depth: 1)
Rows Row Source Operation
1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
1 VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
1 SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790 VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790 UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
231 FILTER (cr=68 pr=0 pw=0 time=920 us)
231 TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
1 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
1 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
0 FILTER (cr=3 pr=0 pw=0 time=0 us)
0 TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
0 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
0 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559 TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 3 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 70 0.00 0.00 0 0 0 0
Execute 85 0.01 0.01 0 62 208 37
Fetch 49 0.48 0.49 0 9490 0 35
total 204 0.51 0.51 0 9552 208 72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
35 user SQL statements in session.
53 internal SQL statements in session.
88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
1 session in tracefile.
35 user SQL statements in trace file.
53 internal SQL statements in trace file.
88 SQL statements in trace file.
51 unique SQL statements in trace file.
1590 lines in trace file.
18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.3
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 09-24-2007 11:09
SYSSTATS_INFO DSTOP 09-24-2007 11:09
SYSSTATS_INFO FLAGS 1
SYSSTATS_MAIN CPUSPEEDNW 2110.16949
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.01 0.01 0 2 16 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.02 0 0 0 0
Execute 1 0.00 0.00 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 0 2 16 0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 65 0.01 0.01 0 1 32 0
Execute 84 0.04 0.09 20 90 272 35
Fetch 88 0.00 0.10 30 281 0 64
total 237 0.07 0.21 50 372 304 99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
10 user SQL statements in session.
76 internal SQL statements in session.
86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
1 session in tracefile.
10 user SQL statements in trace file.
76 internal SQL statements in trace file.
86 SQL statements in trace file.
43 unique SQL statements in trace file.
949 lines in trace file.
0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PMSo while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table." -
Hi Microsoft,
Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
Your help is greatly appreciated!Totally correct!
If you don't plan to maintain Outlook then you plan to fail :(
Additional links etc are in here:
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Upgrade from SCCM 2012 SP1 CU4 to R2 Fails - Unsupported Upgrade Path
Hi everybody,
I'm currently upgrading our SCCM infrastructure to SCCM 2012 R2 after have finished with the upgrade from SCCM 2012 RTM to SP1 CU4, thus far everything works fine, but when I try to update any
of the site servers, whether CAS or Primary, I'm getting the following error message in the Prerequisites Check:
I've gone through the system requirements and prerequisites over and over again and I can assure you that every possible update, supported OS, feature set, SQL Server, check list, etc,
etc, have been followed as per the official documentation available, however I'm stuck in this point, and surely enough I haven't been able to find out a similar case.Additionally I'm adding
the ConfigMgrPrereq log (the relevant portion of it) in case someone could kindly take a look at it.
<04-25-2014 02:06:46> ******* Start Prerequisite checking. *******
<04-25-2014 02:06:47> ********************************************
<04-25-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade,
minimum supported installed build version is [7804].
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Unsupported upgrade path; Error;
Configuration Manager has detected that one or more sites in the hierarchy are installed with a version of Configuration Manager that is not supported for upgrade.
<04-25-2014 02:07:00> INFO: This rule only apply to primary site, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Active Replica MP; Passed
<04-25-2014 02:07:00> INFO: This rule only applies to primary or secondary site in hierarchy, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Parent site replication status; Passed
<04-25-2014 02:07:00> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:00> ===== INFO: Prerequisite Type & Server: SQL:INFPROSCCMCDB.usersad.everis.int
=====
<04-25-2014 02:07:00> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;
SQL Server sysadmin rights; Passed
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int; SQL Server sysadmin rights
for reference site; Passed
<04-25-2014 02:07:00> INFO: CheckLocalSys is Admin of <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Site server computer account administrative rights; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server security mode; Passed
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: OS version:601, ServicePack:1.
<04-25-2014 02:07:09> INFO: Target computer is a Windows server.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Unsupported site server operating system version for Setup; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Domain membership; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Pending system restart; Passed
<04-25-2014 02:07:09> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: Return code:0, Major:10, Minor:50, BuildNum:4000
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server version; Passed
<04-25-2014 02:07:09> INFO: Get Sql edition:Enterprise Edition.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Edition; Passed
<04-25-2014 02:07:09> INFO: Checking Tcp is enabled to Static port, SQL Server:INFPROSCCMCDB.usersad.everis.int,
Instance:.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Tcp Port; Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is limited.
<04-25-2014 02:07:09> INFO: SQL Server memory is limited.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Configuration for SQL Server memory usage; Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<04-25-2014 02:07:09> INFO: Installing the central administration site or primary site, requires SQL
Server to reserve a minimum of 8 gigabytes (GB) of memory.
<04-25-2014 02:07:09> WARN: SQL Server minimum memory is 8000 MB.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int; SQL Server process memory allocation;
Warning; Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by
using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio. For more information about how to set a fixed amount of memory, see
http://go.microsoft.com/fwlink/p/?LinkId=233759.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Case-insensitive collation on SQL Server; Passed
<04-25-2014 02:07:09> INFO: Check Machine FQDN: <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFO: getaddrinfo returned success.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Validate FQDN of SQL Server Computer; Passed
<04-25-2014 02:07:09> INFO:CheckSupportedFQDNFormat <INFPROSCCMCDB.usersad.everis.int>
<04-25-2014 02:07:09> INFO: NetBIOS <INFPROSCCMCDB>
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Primary FQDN; Passed
<04-25-2014 02:07:09> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:09> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:09> ===== INFO: Prerequisite Type & Server: SDK:INFPROSCCMCMS.usersad.everis.int
=====
<04-25-2014 02:07:09> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:09> INFO: The rule 'Administrative rights on site system' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: The rule 'Unsupported site server operating system version for Setup' has
been run on server 'INFPROSCCMCMS.usersad.everis.int', skipped.
<04-25-2014 02:07:09> INFO: The rule 'Domain membership' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> INFO: Windows Cluster not found on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Failover Cluster; Passed
<04-25-2014 02:07:10> INFO: The rule 'Pending system restart' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:10> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Deployment Tools installed; Passed
<04-25-2014 02:07:10> INFO: CheckAdkWinPeInstalled on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int; Windows Preinstallation Environment
installed; Passed
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
SMS Provider machine has same domain as site server; Passed
<04-25-2014 02:07:10> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:10> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:10> ***************************************************
<04-25-2014 02:07:10> ******* Prerequisite checking is completed. *******
<04-25-2014 02:07:10> ******************************************<04-25-2014 02:07:10> INFO: Updating
Prerequisite checking result into the registry
<04-25-2014 02:07:10> INFO: Connecting to INFPROSCCMCMS.usersad.everis.int registry
<04-25-2014 02:07:10> INFO: Setting registry values
If you wonder whether it might be related to this error:
-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade, minimum supported installed build version is [7804].
I confirm that this one site is a secondary one that's attached to a primary site and this log is from the CAS server, I managed to tall it and delete it from that site, but still appears listed
on the CAS management console, any idea how to force the removal of a secondary site that's attached to a primary from the CAS site when it has been removed already from said primary?
I've already tried the
Preinst /DELSITE XXX command but it only works when the site to remove it's attached to the local site and certainly not from a CAS
Finally, the version, build number and everything is correct, no idea what could be the problem, does anybody know a way to bypass this or force the re-evaluation of this rules, I've got
the impression that it's being cached somehow.
Any help would be highly appreciated,
Thank you.
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSEHello again everybody,
I've finally managed to fix this up, in the end I had to delete those entries manually from the database as Garry suggested. After this was done the upgrade has gone through as expected with no further ado and has finalized already, now moving on to the
primary sites.
If anybody out there is facing the same issue, what I did was to delete those "stubborn" records executing the following statements over the CAS database:
DELETE
FROMServerDataWHERESiteCode='XXX'
DELETE
FROMSC_SiteDefinitionWHERESiteCode='XXX'
And this is pretty much about it. I'd recommend to take a proper backup first though as best practice.
Thank you all anyways for your answers and comments,
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE
Maybe you are looking for
-
How do I make a background photo in a folder permanent on a burned CD?
I'm trying to burn a CD with a folder that has a custom picture in the background. I can get the burned CD to show up on my own computer but when I put the disc in another computer, the picture disappears. Does anyone have a trick for making the back
-
Can I load songs and photos into an Ipod Nano I have purchased as a gift?
I have purchased an Ipod Nano 2GB as a gift for my 9 year old granddaughter for Xmas. Before sending it I'd like to load some songs & photos on it, from my own Ipod Library and computer. I'm concerned that doing this from my computer will only compli
-
Early 2009 software-hardware audio problems
I can't seem to put my finger on what is causing the output audio to cease functioning. The problem usually manifests as unable to make any changes to Perferences/Sound where Sound Effects - Output - Input are all greyed out and unselectable and the
-
Help me complite and fix some error in this source
Hi, i have this project, some everyboy can help me fix some error and complite it to get.swf. Thanks! This is project : http://www.mediafire.com/?169q3tr3d2j33zl
-
Does anyone have a suggestion for a good cross-platform video codec that will run in PowerPoint for Mac as well as PowerPoint for PC? Client wants to embed a video clip into a PowerPoint that will run on both Mac and PC. .mov and .wmv are out of the