Upgrade from SAP R/3 Enterprise 4.70 to ECC 6.0

Hi experts,
I am currently trying to build some knowledge for my final project. (Working as an apprentice in computer science atm)
Main goal of the project is to upgrade our dev system to ECC 6.0.
As far as I understand it, ECC 6.0 ONLY works with NetWeaver 7.0. Do I need to upgrade to NW7 before I upgrade to ECC 6.0 or is there a all-in-one package, which upgrades both at once?
I browsed through a few upgrade guides but didn't really find an explaination I could understand...
Could someone describe the basic steps for such an upgrade? (Like: Copy System - Upgrade NW - Install Components....)
Kinda desperate
Thanks in advance!
Sandro Bollschweiler
P.s.: I hope I used the right Forum for my question...

Hi,
When you upgrade to SAP ERP 6.0 (ECC 6.0), the underlying technology within the SAP R/3 4.7 system is automatically upgraded to the SAP NetWeaver 7.0 version. It is one upgrade;
SAP R/3 4.7 -
> upgrade -
> SAP ERP 6.0
SAP Web AS -
> SAP NetWeaver 7.0
The upgrade guides are you best place for information. The SAP ERP 6.0 has the steps to follow and all requirements.
For installations, please see the aptly named installation guide title "Master guide - SAP ERP 6.0". Both the upgrade and installation guides are available at service.sap.com/instguides.
For system copy info, see the SDN page: System Copy and Migration
There is some demo examples here too
All the best,
Mike.

Similar Messages

Upgrade CFM from Sap R/3 Enterprise (4.7) Sap to ECC 6.00

Hello,
We are in a project of upgrade Sap from Sap R/3 Enterprise (4.7) to Sap ECC 6.00. Our question is particularly for CFM component migration/upgrade.
As we checked we have activate the extension set:
EA-FIN: Financials Extension
EA-FS: Financial Services
According with the Component Version Data the extension set EA-FINSERV has the release 2.00. However, in order to execute the CFM migration with transaction TPM_MIGRATION we are not sure if our CFM installation is on release 1.00 or 2.00.
In the other OSS note 858966 mentions the following conditions to start points migration:
1. The start release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 1.10 or earlier.
2. The target release of the upgrade is SAP R/3 Enterprise 4.70 with SAP
R/3 Enterprise extension set 2.00 or higher.
Do you know a transaction o report Sap which provides this information?
Thank in advance.
Sergio

Within SAP, select System -> Status... In the pop-up box, click the details button in the SAP System data section and you'll get another pop-up with system component information. It's been a couple of years since I did the Treasury migration for our upgrade from 4.7 to 6.0, but I believe the component you're looking for is EA-FIN. The Release column will have either 110 (for extension set 1.10) or 200 for (2.00).
Regards,
Shannon

Upgrading from 4.6C to Enterprise 4.70

Looking for high level documentation / presentation with regard to functionality / pitfalls when upgrading from 4.6C to Enterprise 4.7 which can be used to demonstrate to my client.

Hi Terence,
Pl check this <a href="https://websmp201.sap-ag.de/upgrade">OSS Link</a>
<a href="http://www.thespot4sap.com/upgrade_guide_v2.pdf">Upgrade Guide</a>
Regards,
Suresh Datti
P.S. PL reward points if the answer is helpful

Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s

Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

Dear Friends
We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
Could you please help us what needs to be done immediately after upgrade.
Regards,
Bharathi

Dear Nils,
Thanks for the support.
Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
1. Preparation
2. Unicode Preconversion Phase in SAP Basis 4.6C
3. Upgrade Process
4. Unicode Conversion Phase
5. Unicode Conversion Completion Phase
6. SAP Notes
Regards,
Bharathi

Is it possible for XI 2.0 to connect to ECC 6.0 upgraded from SAP R/3 4.6?

Hi,
I just wanted to know whether it is possible for XI 2.0 to be used with ECC 6.0 which is upgraded from SAP R/3 4.6.
If yes, could you forward some links so as to know how.
Thanks,
Fariha

hi,
>>>>Is that Possible..?
yes
>>>Wont there be any additional configuration needed ?
if you use IDOCs then you don't need anything special
Regards,
michal

How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

Hi Experts,
I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
GRC 10.0 only work on NW7.02,we now have NW7.01.
How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
Use EHPI tools or just spam/saint or any other way ?
current version:
SAP_ABA 701 0006 SAPKA70106
SAP_BASIS 701 0006 SAPKB70106
PI_BASIS 701 0006 SAPK-70106INPIBASIS
SAP_01 0006 BW SAPKW70106
Thanks!

HI,
Net wevaer 7.2 CE is totally different from Net weaver 7.01.
No relation i feel.kindly check the links.
http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
http://help.sap.com/content/documentation/netweaver/index.htm
OR
You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
*Regards,
Ajitabh

Upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5

Hi
We are doing upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5, can you please help in below points
1. How much time does it take to run SP5 upgrade service pack for servers and client tools. The server need to be upgraded only on weekend, is it possible to upgrade in 1.5 days?
2. The OS is Windows 2008 server. what should be the rollback plan in case of upgrade failure ? One of server uses VM image while Production server doesnt have any VM image.
3. If BO client tools are on SP3, can they still connect to BO server components on SP5 - (for interim period when servers are upgraded first)
Thanks
anu

Hi Anu,
1. The upgarde should be completed in 1.5 days for the server and client componenets depending upon the number of servers you have in the cluster . If you are planning for upgarde do it successfully first on TEST , DEV and then proceed with PROD servers
2. The roll back plan includes thebackup of the CMS database , the filestore directory and the complete installation folder . In case of any issue , you can the place the backup . If the servers are on the VM , it is always recommeded to have the snapshot of the images before the upgrade
3. Yes, they can connect to the SP3 servers , but always recommeded to upgarde and have servers and client tools on same patch .
Thanks,
Sneha

Depreciation Run Error while Upgrading from SAP 4.6C TO ECC6.0

Hi
We are upgrading from 4.6c to ECC 6.0. In ECC 6.0 we need to make the Number Range Interval as "Internal" and Batch Session tick to be removed from the Depreciation Document Type.
While executing depreciation run, it got terminated and I have done the above changes. After that I have restarted the Depreciation. I have got the following error Message.
Message(s) during check of document ERROR00001
Message no. AAPO511
S:/SAPDMC/LSMW_AUX_020:006 20
Message no. /SAPDMC/LSMW_AUX_020006
If any body aware solution, kindly reply to this message
Thanks
siva

Check this useful links
Key differences between SAP 4.6 - ECC 6.0
http://sap.ittoolbox.com/groups/technical-functional/sap-hr/difference-sap-ecc60-with-sap-r3-3161113
LE/WM functionality difference between 4.6c and ECC 6.0
differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes
Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

Impact of upgrade from SAP CRM Interaction Center 4.0 to 5.0 on Genesys CTI

Hi Friends,
I would like to know that what is the impact of upgrade from SAP CRM Interaction Center 4.0 to 5.0 on Genesys CTI software.
1) Will there be anything we need to change?
            for e.g.
                 a) Settings
                 b) Software
                 c) Hardware
2) What do we need to keep in mind when upgrading from SAP CRM Interaction Center 4.0 to 5.0?

Hello!
The biggest change you must face is related to Java. If you had CRM4.0 Java configuration, you must change your settings to the non-java configuration CRM5.0 has. Most of those changes are performed by the upgrade program, but you must activate services in transaction SCIF.
Your other concerns:
- Software: Most of the Genesys releases are compatible with both java and non java configurations. Anyway, I am sure Genesys has compatibility instructions.
- Hardware: No changes to my knowledge
<b>Hope it helps. Please, reward points if so</b>
Regards
Joaquin

Question regarding Upgrading from Standard Edition to Enterprise Edition

DB version:10gR2
We want to upgrade from Standard Edition to Enterprise Edition.
In the following documention
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#BABFBJCC
It talks about
Deinstall the Standard Edition server software.I don't understand what they mean by DeInstall the software.
Question 1.
By 'DeInstall' , they mean , use DeInstall Products in the Welcome screen of Oracle Universal Installer and Remove the chosen OUI Home.Right?
Question 2.
If i 'Deinstall' (ie. remove the software), all the binaries are lost. Right? So what is the point of having just the data files?
Edited by: Citizen_2 on Apr 8, 2009 1:59 AM

Citizen_2 wrote:
DB version:10gR2
Question 1.
By 'DeInstall' , they mean , use DeInstall Products in the Welcome screen of Oracle Universal Installer and Remove the chosen OUI Home.Right?Yes, that means use OUI and deinstall the Standard Edition
Question 2.
If i 'Deinstall' (ie. remove the software), all the binaries are lost. Right? So what is the point of having just the data files?Because next point says install Enterprise Edition. For first get rid of old one and then install the needed one. There is no such option as upgrade in this case.

Extract structure changes related to 2LIS_03_BF from sap R/3 4.6 c to ECC 6

Dear Experts,
Recently we have upgraded out BW sytem from BW 3.5 to BI 7.0.
Now planning for R/3 upgrade FROM 4.6c to ECC 6.0 is ongoing .
We have observed that there are some extract structure changes related to 2LIS_03_BF from sap R/3 4.6 c to ECC 6.
Please share some information...if u guys of any?
thanks a lot in advance...
Regards,
SRIKANTH

Im sorry but structures in SBIW - LO Cockit dont use any of this fields.....in LO Cockpit you can see the structure of the Datasource and theres no any of the fields of that structure ....check Cockpit and compare there, structure of SE11 are not the final structure that the extractor uses for Data Staging...
At least for me is what i use...i think that those structures additional are for special for EA retail only...in my case they dont aplly....
I hope this helps you
Regards

Upgrade from SAP R/3 4.6C to SAP ECC 6.0

Dear All,
Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
I have already checked the SAP Marketplace (Product Availability Matrix) and found that SAP R/3 4.6C first needs to be upgraded to mySAP ERP 2004 (SAP ECC 5.0) and then from SAP ECC 5.0 to SAP ECC 6.0.
My first question is whether I am on the right track.
Secondly, I was going through various SAP Upgrade strategies and curious to know the difference between technical upgrade and functional upgrade.
Please correct me if I am wrong - technical upgrade is when you technically upgrading the SAP ECC release from 4.6C to 5.0 (that is, upgrading Operating System, Database and ECC).
Once it has been completed, business processes (functional modules) need to be remapped. The development needs to be reworked upon (Modification Adjustment). This is what is known as functional upgrade.
I would appreciate if someone throws some light on my understanding on this subject.
Regards.
Wolfgang.

> Our organisation has been running SAP R/3 4.6C on Solaris 8 with Oracle 8i database. We are considering an upgrade to SAP ECC 6.0.
Oh.. you're aware of the fact, that Oracle 8 as well as Solaris 8 is out of support?
I would do it like (if you need/want to stay on the same hardware):
- upgrade Oracle 8 (I hope your run 8.1.7.4) to Oracle 9.2.0.8
- upgrade Solaris 8 to Solaris 10
- upgrade Oracle 9.2.0.8 to Oracle 10.2.0.4 + latest interim patches
- use kernel 46D_EX2
- upgrade the 4.6c to ERP 6.0
Be aware, that, if you plan to use Java applications (such as the Enterprise Portal or other Netweaer related appliation), the ERP 6.0 must be converted to Unicode.
Markus

Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

Dear all
we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
EHP_INCLUSION.log details
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100915210509
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DE'
4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399      Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
4 ETQ399             (not usable, different component
4 ETQ399 ... No matching package found.
Is this related to the current SAP_APPL support pack version ?.currently we have
SAPKH47031 SP 31 for SAP_APPL 4.70
Regards
Shahnas.S

> i have few questions regarding above
(Almost) all of your questions are answered in the note:
> 2.Do wee need to apply the above note for non-unicode upgrade
<...>
Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
<...>
> 3.Note 1330256 recomends to apply support pack or to apply the Note 1330256 ,but we can do it only at upgraded version.
Yes - it avoids dumping with the dump mentioned in the note
> 4.How to identify the matchcodes
<...>
You can use the program TWTOOL01 to determine the existence of matchcodes.
<...>
> 5.How to delete them
<...>
You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
<...>
> 6.Impact of deleteing matchcodes
None since they were replaces by search helps.
Markus

Upgrade from SAP R/3 Enterprise 4.70 to ECC 6.0

Similar Messages

Maybe you are looking for