Upgrade from SCM 5.1 to SCM 7.0 SR1 (with NW 7.0 EHP1 SR1)

Hi folks,
we are trying to upgrade our SCM5.1 to SCM 7.0 SR1. There seems to be a problem in the phase, where SAPup is trying to detect the needed CDs / DVDs. SAPup recognizes that "FRP" is used within the system. There appears a dialog to enter the mount points for the DVDs required for the upgrade.
It says <<Enter at least the mount point for the DVD titled "FRP Software DVD">>. All other needed media is accepted, but not the DVD with the FRP-Software.
SAP Note "1300960"  explains, that as of SAP Business Suite 2008 onward, no media without a MID.XML file will be accepted for upgrades (e.g. media containing Add-Ons).
I have opended a message to SAP Support, but there is no solution / workaround until now. I cannot skip the phase and therefore it is not possible to launch / continue the entire upgrade.
SAPup Version is "7.10/7, build 31.010 for UNICODE"
Has anyone faced the same problem with no-MID.XML based media?
Thank you for any advice!
Kind regards,
Marcel Jentsch

Hi,
We just upgraded from SCM 5.0 to 7.0 sp9.
You need not deactivate the DP planning areas before upgrade.
We did not face any issues because of this.
Regards,
Ashok

Similar Messages

  • Upgrad from Windows 8 Pro on Windows 8.1 Pro with Media Center!

    Hello,
    I did upgrade from Windows 8 Pro on Windows 8.1 Pro with Media Center. Now the problem is when I press on any file with the right mouse button is normally open curtain menu, but when I press on any folder, right-click, the system crashes after a few seconds
    and back up.
    Best regards!

    Hi,
    Go Start>Control Panel>Administrative Tools>Event Viewer and scroll through the logs for System and Applications to see if anything shows up in red as Error or Warning.
    Meanwhile, going to HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers
    in regedit.exe, backing up the whole ConxtentMenuHandlers folder, and then start deleting all of them one by one and continuously testing the right click.  Of course import the Context folder after you find it, test once again by right clicking
    to make sure you found the problem, and delete the file that caused the problem.
    Karen Hu
    TechNet Community Support

  • Upgrading from XI/PI7.0 to 7.1 having problems with message mapping

    Hello,
    We are in the process over the past week of testing our XI/PI functionality after upgrading our 7.0 XI/PI environment to PI7.1; in particular several maps that were accessible in 7.0 will not open or diaplay in 7.1 complaining of a missing node in the mapping structure. Currently working with SAP on a possible fix but wanted to know if anyone else has done a true migration on top of an existing XI/PI7.0 system and experiencing similar issues (note: the maps can execute in the runtime environment but we can't display the maps source within message mapping; this also does not occur for all maps and there is no clear consistant theme to those that can be displayed and those that can't).
    The lattest issue just encountered related to message mapping is that in test mode of a map (that can be displayed) attempting to display the data queue for the mapped elements are blank no data being displayed giving an error noting that the source text of object message mapping: name of the map; has syntax errors, java area import line x, package ibm.com.xi.mapping does not exist/ import ibm.com.xi.mapping UDF:
    Has anyone upgraded from PI7.0 to 7.1 and experienced errors with existing maps that worked ok (ans still work in our QX/PRD systems) in their 7.0 envirinment but encountereing strange errors once upgrated to 7.1?
    Thanks
    Dereck Purnell
    NewellRubbermaid

    Here is the solution we received from SAP to address the issue, there were several mapping related issues we started havng from maps that worked in our 7.0 system prior to the upgrade to PI 7.1. I will try to encorporate the solutions in this response.
    a) From Customer to SAP
    1. We are unable to open some massage mapping, it is throwing
    exception
    2. Number Format functions throw exception.
    But following issue is still unresolved:
    3. When we display message queue, it throws exception
    ***) 05.02.2009 - 12:34:33 CET - Reply by SAP     
    The patch has been released at the Service Marketplace.
    Please update the scas described in the note 1264871.
    The "FormatNum" function issue has also been taken care in this patch.
    Please go through the Note 1264871 for other behaviour changes after
    upgrade. Let us know if you need any further help.
    Regards,
    B) From Customer to SAP
    04.02.2009 - 00:23:44 CET - Info for SAP
    We discovered another issue with mapping.
    For some of the mappings, we are unable to display mapping queue. When
    we execute, Interface mapping and Massage mapping, it works fine. But
    display queue throws exception. Itu2019s not able to recognize libraries
    used from dependent software component.
    Please find document "Display Mapping Queue Issue" providing example
    problem.
    25.02.2009 - 07:05:28 CET - *Reply by SAP*     
    Thank you for your update. I wanted to check with "CopyValue"
    function's index. It has to take an input integer and the problem that
    found while debugging the opening of your mapping is that the input
    was empty thus causing the exception.
    I was going to suggest the intended use of "CopyValue" function.
    When the input to "copyValue" is a constant, "copyValue" is totally
    not necessary. Thus constant can be directly mapped to other function.
    When the input is a node with values in context, you can treat one of
    values say input[0] to used in mapping by using CopyValue[0].
    But please make sure that input[0] will always produce a value.
    Note 877964 will describe in detail on Copyvalue usage.
    I am marking this Message as complete. Please confirm.

  • Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter

    We are upgrading from Exchange 2007 SP2 to SP3.
    Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
    DC is on windows 2008 Enterprise 32 bit OS - SP2
    When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
    On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 1:12:38 PM] [0] End of Setup
    [2/1/2015 1:12:38 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:53 PM] [0] **************
    [2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server''  
    [2/1/2015 2:17:53 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [0] **************
    [2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [0] **************
    [2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:55 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [0] **************
    [2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Ending processing.
    [2/1/2015 2:19:07 PM] [1] Beginning processing.
    [2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:07 PM] [1] Ending processing.
    [2/1/2015 2:19:08 PM] [1] Ending processing.
    [2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:19:20 PM] [0] **************
    [2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
    [2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''  
    [2/1/2015 2:19:20 PM] [1] Beginning processing.
    [2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
    [2/1/2015 2:19:20 PM] [1] The following roles are current: 
    [2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
    [2/1/2015 2:19:26 PM] [1] Found 22 components
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
    [2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
    [2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/1/2015 2:19:32 PM] [2] Beginning processing.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/1/2015 2:19:35 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:51 PM] [2] Process standard error: 
    [2/1/2015 2:19:51 PM] [2] Ending processing
    [2/1/2015 2:20:07 PM] [2] Process standard error: 
    [2/1/2015 2:20:07 PM] [2] Ending processing.
    [2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:07 PM] [2] Beginning processing.
    [2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
    [2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:10 PM] [2] Process standard error: 
    [2/1/2015 2:20:10 PM] [2] Ending processing.
    [2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:10 PM] [2] Beginning processing.
    [2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
    [2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:12 PM] [2] Process standard error: 
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
    [2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
    [2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
    Appreciate if someone can help us move forward in this scenario.
    We have
    1. disabled anti virus and tried.
    2. removed watermarks and action entries in the registry
    3. tried almost everything mentioned on google but i am not able to move forward.
    Please help. we need this as part of our migration to Exchange 2013 for co-existence.
    Thank you.
    Philip

    ExchangeSetup.log (part 3)
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
    [2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/2/2015 8:06:45 PM] [2] Beginning processing.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:07:00 PM] [2] Ending processing.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/2/2015 8:07:00 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
    [2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
    All compilation targets are up to date.

  • Upgrade from 10.4.11 to 10.5.6 - problem with installer

    This is doubtless an old problem with maybe with a new twist. I am upgrading from OSX 10.4.11 to OSX 10.5.6. I crossed my fingers hoping all would go well but can't even get the machine to restart and to mount the Installer on the desktop. Hence, evolving from a Tiger to Leopard hasn't been a success.
    No matter what I try the machine goes to a grey OS screen with gobblygook on screen and stops. Investigation leads me to understand the gobblygook is a kernel panic, also featuring a Multilanguage screen. I have tried the normal restart procedure with the installer, holding C key down with restart and setting up the CD as the install disk for the restart, all to no avail.
    When I eject the install DVD I can recommence using my machine without any apparent ill-effect.
    An action plan and suggestions would be welcome.

    Leopard requires at least a Mac with an 867MHz or faster PowerPC G4 processor -- see the Minimum System Requirements section of Mac OS X v10.5.6 Leopard - Apple Store (U.S.) or just look on the retail box packaging.
    According to your profile info, your Mac is an "iMac DV," apparently a 400 MHz PowerPC G3 model. Since that isn't even close to meeting the minimum system requirements for Leopard, & the installer disc itself runs a version of Leopard as well as installing it, it is no surprise that you get a kernel panic when trying to startup from the disc.
    IOW, your G3 Mac cannot run any version of OS X beyond Tiger.

  • Upgrading from old Mac to new- how to sync iPhone with new Mac?

    Hi all,
    My dad is upgrading from an old iBook to a nice new iMac. He has spent quite a few days tweaking his new iMac and importing old files and folders. The one thing we haven't yet done, though, is iTunes. He has an iBook G3 that he syncs his iPhone with, and he wants to be able to "move" his whole iTunes setup to the new iMac so that it picks up right where the iBook left off, without needing to reset the iPhone.
    One thing to keep in mind is that the iBook had a tiny hard drive and thus the music files are actually on an external hard drive. I was wondering how to go about this feat. I read that using Migration Assistant deletes everything off the new Mac, so that's not an option at this point. Thanks for the help!

    If you had use Migration Assistant to start with it would have been easier.
    See if this article helps - http://support.apple.com/kb/HT1449?viewlocale=en_US
    MJ

  • Problem upgrading from 1.4.1.02 to 1.4.2 with WInXP

    I wish to upgrade from Java 1.4.1.02 to 1.4.2 ((Please ignore my previous garbled posting, and read this instead).
    After downloading the Java SDK 1.4.2 Netbeans 3.5 co-bundle I tried to uninstall the old Java SDK 1.4.1.02 from Windows XP professional.
    This was entirely unsuccessful (see later for details), so I installed the cobundle anyway.
    The co-bundle installed and works OK, but it did not update the Java plugin (found in the control panel). I really want the new plugin working.
    I believe that I need to manually uninstall 1.4.1.02, including the Java plugin.
    Will I need to uninstall + reinstall 1.4.2 to get the most up to date plugin? And if so, should I do it before manually uninstaling 1.02?
    How do I do a manual uninstallation in windows XP?
    Details of Remove Program woes:
    In the windows Add/Remove programs panel there were 2 entries for the JRE 1.4.1.02. I managed to run the uninstallation of the first 1.4.1.02 JRE in the list, but the other failed. When I rebooted, both were still listed on the Add/Remove Programs. Running uninstallation again produced the same results. One uninstalls, one fails, but both remain on the Programs list. I have tried all combinations: Uninstall 1st by itself, 2nd by itself, both, both in the other order, neither. Same result every time.
    I need to remove both of these, and I need to uninstall the Java Plugin (as I want to upgrade the plugin to 1.4.2)

    Thanks for the information, but my goal was to replace the horrible java 1.4.1.x plugin (see Windows Control panel) with the supposedly improved 1.4.2 version.
    I ended up deleting every file and registry key with java 1.4.1.02, which let me install the updated plugin successfully - but using the sdk install, not the netbeans co-bundle.
    The icon for the old plug-in is still there in control panel (but is not attached to any program). Still haven't worked out how to get rid of it - I figure if it's not in the registry, I'm not likely to ever work it out myself.

  • Upgrading from 10.6.7 to 10.6.8 issue with GUI

    Hi,
    I've been trying to upgrade 10.6.7 to 10.6.8 multiple times now on my MBP and gets to the same error every single time.
    10.6.7 runs like a charm - no issues no nothing.
    I download 10.6.8 v1.1 combo pack and try to install it, it runs and want to restart. Once it boots all I get is either a screen switching/flickering between the apple logo or an orange screen. At this time I'm able to access the shared folders from another mac on my network and check the logfiles that it's done with its upgrade.
    Here I notice the windowserver.log doesn't look like it used to do only stating :
    Jun 23 13:54:03  [75] Server is starting up
    Usually says:
    Jun 23 13:21:24  [69] Server is starting up
    Jun 23 13:21:38  [69] CGXMappedDisplayStart: Display0 : boot screen
    Jun 23 13:21:38  [69] CGXMappedDisplayStart: Display0 : display alias 0x0 valid
    Jun 23 13:21:38  [69] CGXMappedDisplayStart: Display1 : display alias 0x1 valid
    Jun 23 13:21:38  [69] CGXMappedDisplayStart: Display2 : display alias 0x0 valid
    Jun 23 13:21:38  [69] CGXMappedDisplayStart: Display3 : display alias 0x1 valid
    Jun 23 13:21:38  [69] MPFinalizeInitialization: Display 0x3f003f unit 3 alias mask 0xa
    Jun 23 13:21:38  [69] MPFinalizeInitialization: Display 0x3f003e unit 2 alias mask 0x5
    Jun 23 13:21:38  [69] MPFinalizeInitialization: Display 0x3f003d unit 1 alias mask 0xa
    Jun 23 13:21:38  [69] MPFinalizeInitialization: Display 0x4272100 unit 0 alias mask 0x5
    Jun 23 13:21:38  [69] GLCompositor: GL renderer id 0x0102260c, GL mask 0x00000003, accelerator 0x00003137, unit 0, caps 0x00000003, vram 512 MB
    Jun 23 13:21:38  [69] GLCompositor: GL renderer id 0x0102260c, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
    Jun 23 13:21:38  [69] GLCompositor: GL renderer id 0x0202260e, GL mask 0x0000000c, accelerator 0x00003c0b, unit 2, caps 0x00000003, vram 256 MB
    Jun 23 13:21:38  [69] GLCompositor: GL renderer id 0x0202260e, GL mask 0x0000000c, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
    Jun 23 13:21:38  [69] agc_attach: gMux mode is logout or safe (2)
    Jun 23 13:21:38  [69] CGXPerformInitialDisplayConfiguration
    Jun 23 13:21:38  [69]   Display 0x4272100: MappedDisplay Unit 0; Vendor 0x610 Model 0x9c84 S/N 0; online enabled built-in (0,0)[1440 x 900], Rotation 0, base addr 0x102000000
    Jun 23 13:21:38  [69]   Display 0x3f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1; offline enabled (2464,0)[1 x 1], Rotation 0, base addr 0x112000000
    Jun 23 13:21:38  [69]   Display 0x4272102: MappedDisplay Unit 2; Vendor 0x610 Model 0x9c84 S/N 0; offline enabled built-in (2465,0)[1 x 1], Rotation 0, base addr 0x112000000
    Jun 23 13:21:38  [69]   Display 0x3f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1; offline enabled (2466,0)[1 x 1], Rotation 0, base addr 0x102000000
    Jun 23 13:21:38  [69] Display 0x4272100: MappedDisplay Unit 0; ColorProfile "Color LCD" (MD5 378f9124977f17f13c5312687683813d)
    Jun 23 13:24:10  [69] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
    Jun 23 13:24:10  [69] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
    Jun 23 13:24:10  [69] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
    Jun 23 13:24:10  [69] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
    Jun 23 13:24:10  [69] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
    Jun 23 13:24:10  [69] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
    Jun 23 13:24:10  [69] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
    Jun 23 13:24:10  [69] kCGErrorIllegalArgument: CGXSetTrackingAreaOption : Invalid tracking area
    Jun 23 13:26:51  [69] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x6 not owned by caller SystemUIServer
    Jun 23 13:26:56  [69] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x6 not owned by caller UserNotificationCenter
    I'm able to access it via SSH as well, if the setting is ticked in sharing option, and can see that WindowServer is using 100% cpu on the MBP.
    Anyone got any idea on how to get it up and running again and get me to 10.6.8?
    Yes I have reset PRAM, SMC, erase and install, etc. Every time I'm able to get the MBP to 10.6.7 without any issues. I've even tried to install the latest CUDA drivers for the nvidia cards which didn't make any difference.
    When I start it in verbose mode the last line is:
    [ PCI configuration begin ]
    Anything would help...

    I can add it's the same with upgrading to Lion... So I guess they changed some driver code between 10.6.7 and 10.6.8 and its not compatible with my logic board.
    Annoying tbh..

  • Upgrade from OS X 10.6.8 to X Yosemite with 4GB memory, 2.26 GHz

    Can a MacBook Pro that has OS X 10.6.8, 4GB memory, 2.26 GHz intel Core 2 Duo able to upgrade to X Yosemite and still run Word/Excel/PPT 12.3.6 without a problem?  From previous posts I'm not sure I have enough memory.
    Thanks!

    The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
    Crucial
    Other World Computing

  • Upgrade from oracle linux 5.5 to oracle linux 6 with oracle kernel

    Hi
    Is it possible to directly upgrade this two OS
    Regards
    Jaroslaw

    Oracle Linux is derived from Red Hat Enterprise Linux, which does not support upgrading between major versions. Red Hat does not support in-place upgrades between any major versions of Red Hat Enterprise Linux. In-place upgrades across major releases do not preserve all system settings, services or custom configurations.

  • Upgrade from AppV 4.6 RTM to 4.6 SP3 with HF03

    Hi,
    While doing the upgradation of APPV client from AppV 4.6 RTM (v4.6.0.1523 ) to 4.6 SP3 with HF03, do we need to do any kind of consideration. I am concern about will all
    the packages created with 4.6, work properly in 4.6 SP3 with HF03?
    Packages should work but asking for safer side and also if any link about this is available from Microsoft please provide.
    regards,
    Santosh.

    Hi,
    I am concern about will all the packages created with 4.6, work properly in 4.6 SP3 with HF03?
    They will still work, no re-packaging or conversion necessary.

  • How do I upgrade from OS 10.5.8 to OS 10.6 with broken dvd drive?

    Hi I have a MacBook from 2010 and I still have OS 10.5.8 on it but most applications won't work now (like I can't download a new itunes) because my OS is so outdated. I want to put the next OS on it but my DVD drive is broken. Is there a way I can get and install a new OS on it?

    In theory it is possible to use the DVD drive on another Mac.  The 2 Macs must be on the same local network, then you need to use a 3rd party control panel called "Secrets"
    https://www.macupdate.com/app/mac/27025/secrets>
    and then use Secrets to enable "Show Remote Disc" on the Mac that has a broken DVD drive.
    On the Mac that has a working DVD drive you use System Preferences -> Sharing to enable DVD sharing (if you do not have that option, it can be enabled via Secrets).

  • Upgrading from OSX 10.58 to 10.6 - any problems with previously installed software anyone?

    I was wondering if anyone had had any problems with their current software after installing 10.6? (I'm asking because I have a substantial investment in the Adobe Creative Suites and don't want to lose it.) Has anyone had any problems after installing 10.6?  Thank you in advance for any replies.

    I would check the Adobe web site to see if it will be compatible.  If there is an issue you may consider a partitioned HDD and run the two OSs each on separate partitions.
    Ciao.

  • How to tell if Yosemite is clean install or upgrade from previous version

    My brand new MacBook Pro arrived last week, with Yosemite already installed on it.
    Having issues with WiFi (after coming out of sleep mode, mbp keeps its self-assigned address rather than getting an address though DHCP or using its old address), I was searching for support on the matter, and one of the solutions often suggested was doing a clean install of Yosemite if the mbp was upgraded from 10.9.
    Seeing that the mbp arrived with Yosemite pre-installed, I'm guessing that it is a clean install, but I'm not sure.
    I wonder if there is a way in telling if the OS was upgraded to the current major version, or if it's a clean install? Even if Apple only ships clean installs, it would be helpful to know if I need to give support to one of the mac-users in our company if it's a clean install or not.

    On my system, the Yosemite upgrade (performed on Oct. 23) left quite a bit of residue that would not be present after a clean install.  The most obvious examples are in /var/db/receipts, which contains BOM files for all of the software installed via the Mac OS installer, e.g.,
    -rw-r--r--  1 root  wheel     98584 Oct 20 08:49 com.apple.pkg.update.lion.appstore.155-2.bom
    -rw-r--r--  1 root  wheel       563 Oct 20 08:49 com.apple.pkg.update.lion.appstore.155-2.plist
    -rw-r--r--  1 root  wheel     81657 Sep 29 17:13 com.apple.pkg.update.os.bash.lion.1.0.163-3.bom
    -rw-r--r--  1 root  wheel       279 Sep 29 17:13 com.apple.pkg.update.os.bash.lion.1.0.163-3.plist
    -rw-r--r--  1 root  wheel     80653 Aug 12 13:34 com.apple.pkg.EPSON_USBPrintClassSL.bom
    -rw-r--r--  1 root  wheel       472 Aug 12 13:34 com.apple.pkg.EPSON_USBPrintClassSL.plist

  • Upgrading from Solaris 10 s10_72 (beta) so patches work

    Hi,
    What is the recommended way to go from
    Solaris 10 s10_72 X86 (beta) to a release that I can actually patch?
    Thanks!

    So I took the upgrade option from the 6/05 release I downloaded today from the Express program.
    Now:
    god@irt-v20z-01:autopatch 4:35pm 56 # cat /etc/release
    Solaris 11 nv_15 X86
    Copyright 2005 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 17 May 2005
    Can I assume pca does not identify any patches for Solaris 11.
    Am I now on a patchable a supportable platform?
    (Previous threads had said there was no upgrading from Beta - but I appear to have done it with 6/05)
    Thanks!

Maybe you are looking for

  • Jtable: How to change the color of an entire row?

    How can I change the color on an entire row in a Jtable based upon the value in one of the cells in that row. For example: Lets say: I have 5 rows. Each row has 4 columns. If column 4 has a value "A" in any of the rows, all the text in that row shoul

  • OS managemnet agent install fails.....

    I have a group of Solaris 10 servers where the agent installation fails at executing step : sc_console verified sc_console command is OK Configuring sc_console checking existing sc_console connections doing sc-console registration Feb 23, 2012 7:37:2

  • How burn DVD from iPhoto in MacBook Pro

    I am trying to burn photos to a DVD . I inserted blank DVD-R, selected the photos, and selected burn  from the Share drop down in iPhoto.  Nothing happens.

  • Toolbar problems

    Software updated yesterday and now my "Reader" on right of my toolbar is grey and Google search tab is gone  - How do I get it back?

  • How do I install an app when the app indicates it is already installed, but it is not?

    I am trying to install NFL 2011, but the app store indicates this app is already installed,  but it is not.   The "install" button is already faint.