Upgrade from SCOM 2012 R2 directly to UR4
Is it possible to Upgrade from SCOM 2012 R2 RTM to Update rollup 4 ?
I alreday upgraded but I could not find new dashboard and widgets ?
It's a cumulative upgrade so you don't need to install all of the release sequential. Latest is enough.
Did you also import the management packs as mentioned in the guide?
https://support.microsoft.com/kb/2992020/en-us
Import the following management packs:
Microsoft.SystemCenter.TFSWISynchronization.mpb, which has the following dependency:
Microsoft.SystemCenter.AlertAttachment.mpb, which should be installed from the System Center Operations Manager 2012 R2 media.
Microsoft.SystemCenter.Visualization.Library.mpb
Microsoft.SystemCenter.Visualization.Component.Library.mpb
Microsoft.SystemCenter.Advisor.mpb
Microsoft.SystemCenter.Advisor.Internal.mpb
Microsoft.SystemCenter.2007.mp
Also don't forget to update the console!
Similar Messages
-
Upgrading from SCOM 2012 SP1 to SCOM 2012 R2 what CU do i install? CU5?
Hi,
I just upgraded from SCOM 2012 SP1 to SCOM 2012 R2. What CU version should I install? CU5?
Thanks
KThe most current CU version os SCOM 2012R2 is CU4
You can download it from
https://support.microsoft.com/kb/2906925?wa=wsignin1.0
For detail description of SCOM 2012 R2 CU4, you may refer to
http://support.microsoft.com/kb/2992020
and
http://syscentercldman.blogspot.hk/2014/12/update-of-scom-2012-r2-ur4.html
Roger -
I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment. -
Upgrade to R2 from SCOM 2012 SP 1 UR 4 - Final configuration failed to install
I was upgrading our test SCOM 2012 SP1 UR 4 sever to R2 and ran into the following issue:
Setup cannot be completed… Final configuration failed to install.
Everything else upgraded fine.
There was no rollback performed…. The log states “Skipping rollback for install item Final Configuration as it was not successfully installed”
Looking in OpsManagerSetupWizard.log in the section for Final Configuration I see the following:
[16:00:43]: Always: :!***** Installing: POSTINSTALL ***
[16:00:43]: Info: :SetProgressScreen: StartMinorStep.
[16:00:43]: Warn: :ApplyUpdates: Unable to load QFE file.
[16:00:43]: Always: :Doing Preinstall task for POSTINSTALL
[16:00:43]: Warn: :CheckAndLoadUpdateFiles: Unable to load QFE file.
[16:00:43]: Always: :Doing Install task for POSTINSTALL
[16:00:44]: Debug: :DoInstallTask: Found Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall;PostInstallProcessor as type and method.
[16:00:44]: Info: :Type: Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall Method: PostInstallProcessor
[16:00:44]: Info: :SetProgressScreen: Init Exe Install progress.
[16:00:44]: Info: :AddUninstallChangeEntry: Cleaning out existing files at the ARP file cache location D:\Program Files\System Center 2012\Operations
Manager\Setup
[16:00:44]: Error: :InstallActionProcessor.DoInstallTask: method PostInstallProcessor threw exception. We will return installSuccessful = false.:
Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[16:00:44]: Error: :StackTrace: at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.SystemCenter.Essentials.SetupFramework.InstallActionProcessor.DoInstallTask(InstallItemsInstallDataItem itemToInstall)
[16:00:44]: Error: :Inner Exception.Type: System.UnauthorizedAccessException, Exception Error Code: 0x80131604, Exception.Message: Access to the path 'EULA_EN_EVAL.RTF'
is denied.
[16:00:44]: Error: :InnerException.StackTrace: at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive, Boolean
throwOnTopLevelDirectoryNotFound)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ARPFileCache()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.AddUninstallChangeEntry()
at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall.PostInstallProcessor(Func`3 setProgressScreen)
[16:00:44]: Error: :ProcessInstalls: Install Item Final Configuration failed to install. We did not launch the post process delegate.
[16:00:44]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Final Configuration
[16:00:44]: Info: :SetProgressScreen: FinishMinorStep.
[16:00:44]: Always: :****************************************************************
[16:00:44]: Always: :****Starting*RollBack*******************************************
[16:00:44]: Always: :****************************************************************
[16:00:44]: Info: :SetProgressScreen: StartMinorStep.
[16:00:44]: Always: :ProcessRollback: Skipping rollback for install item Final Configuration as it was not successfully installed.
[16:00:44]: Always: :****************************************************************
[16:00:44]: Always: :****Ended*RollBack**********************************************
[16:00:44]: Always: :****************************************************************
[16:00:44]: Always: :Entering Page: FinishPage
The log states “Access to the path 'EULA_EN_EVAL.RTF' is denied.” I was able to find this file in D:\Program Files\System Center 2012\Operations Manager\SetupTemp\EN, but when viewing its contents I see it
was from the SP 1 upgrade as it starts off with “MICROSOFT EVALUATION SOFTWARE LICENSE TERMS MICROSOFT SYSTEM CENTER 2012 STANDARD SERVICE PACK 1.” Based on everything else referenced in the log file previously, it seems like it was trying to locate
this file in D:\Program Files\System Center 2012\Operations Manager\Setup. Also, I applied the product key after installing SP1 previously, so it was not running with an evaluation license.
Running Get-SCOMManagementGroup | ft skuforlicense, version, timeofexpiration –a
gives me:
SkuForLicense Version TimeOfExpiration
Retail 7.1.10226.0 12/31/9999 11:59:59 PM
The version (7.1.10226.0) is that of SCOM 2012 R2 (as I noted before, there was no rollback.) Everything seems to be functioning fine (Console, Web Console, Reporting Services.)
Is there a way to get it to re-run only the Final Configuration steps (which will probably fail again as the EULA file does not exist where it expects it)? I am not sure if there were supposed to be any further
configuration steps that did not get completed, so i dont know how stable SCOM is now. Should I re-run the R2 installer? Or is it OK as is? The only info online about a SCOM Install where the final configuration failed to install dealt with
an error upgrading the SCOM Console, which is not relevant to my situation. This is my test SCOM environment, running on a VM. I could revert to the pre-upgrade snapshot and see if another upgrade attempt completes successfully, but if that does
work I am concerned that something like this may happen in my prod environment, which is not running on a VM, so has no ability to revert to a snapshot.Hi,
Please refer to the following links:
Do I need a specific Cumulative Update Release (UR) in order to upgrade to SCOM 2012 or 2012 SP1 or 2012 R2?
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Upgrading Operations Manager from 2012 SP1 to 2012 R2 step by step
http://www.systemcentercentral.com/upgrading-operations-manager-from-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+systemcenterforum+%28System+Center+Central+Rollup%29
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Upgrade from SCOM 2007 R2 to SCOM 2012 R2 on a single server
we are planning to Upgrade from SCOM 2007 R2 to SCOM 2012 R2 on a single server.We are planning to do in place upgrade.
If you looking for a guide, check : http://blogs.4ward.it/how-to-upgrade-to-scom-2012-from-scom-2007-inplace-upgrade/
MS documentation for the upgrade is located at: http://technet.microsoft.com/en-us/library/hh476934.aspx
thx
Pranav -
We need the download of SCOM 2012 without Service Pack1.
Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
Upgrade was started from dos elevated prompt with modified parameters like this:
setup.exe /silent /upgrade
/AcceptEndUserLicenseAgreement:1
/UseLocalSystemDASAccount
/DataReaderUser:<domain\user>
/DataReaderPassword:<password>
Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
SCOM 2012 to SCOM 2012 SP1 it succeeds.
Unfortunately, we don't find any downloads for the first release of System Center 2012 e.g. Operations Manager.
Everything shows Service Pack 1 or the newer R2.
Who can help?Our “Recommended” rolling upgrade path looks like the following:
SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
SCOM 2012 SP1 UR4+ > SCOM 2012 R2
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical -
Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1
Hi,
Little background about our systems.
We have a dedicated SCOM 2012.
We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM
We have a few DPM servers that are not located on the same domain as the SCOM server (untrusted domain).
Some problem we have
1. When we try to manage the DPM servers from the SCOM server.
From SCOM 2012 server I can “Manage DPM server” that are located in our domain but I cannot manage DPM servers located on untrusted domains (customer’s domains). I receive the below error message
"Unable to connect to <untrusted domain DPM SERVER> ID: 948
Verify that the DPM service is running on this computer"
I guess it’s because the account that I’m using to run SCOM server located in our domain and does not have the permission to open the DPM console on the untrusted domain. So I wonder if it is possible to use “RUN AS profiles/accounts”
to solve this issue, and how?
2. I have installed SCOM 2012 Operations Manager Console on my computer and then installed DPM Central Console.
When I select one dpm server (from my computer), that is on our domain, and then click “Manage DPM server” I got this error message
"Unable to connect to <our domain DPM SERVER> ID: 33333
1. Verify that the DPM service is running on this computer (YES)
2. Verify that the current user has been added to at least one of the roles in Operations Manager. (YES)
3. Open Operations Manage console and then try launching the DPM Console (THAT IS WHAT I AM TRYING TO DO)
4. If you have re-imported the management pack recently, the role configuration may be corrupt. Open the DPM-specific roles and check if the roles have task assigned to them. If not, delete the roles and recreate the...."
When I click on “Get more information” I get this error message.
"You don´t have access permission to connect to the System Center Data Access service on <SCOM SERVER>. Please check if it is a permission issue".....
Do you know why I cannot connect to any DPM server on our own domain?
Why do I get access permission error on my computer but not on the SCOM server (using the same account)?
What should we do to be able to connect to DPM servers that are on untrusted domain?
3. Is it possible to see Last Recovery Point date/time in SCOM alerts?
For me it is the first thing I look at. If it has failed 10 min ago it is not critical.
But if it is a date and time more than 1 day old, then it is critical.
I hope someone can help us with this
Br
SvBohoHi,
To manager DPM, I think we may need to add the account to local admin group of the DPM server.
In addition, to connect to DPM the user needs permissions to DPM/SQL Server DPMDB.
For your DCs, have your enabled agent proxy option? If not, please enable that option for all DCs.
To monitor DPM with SCOM, please also go through the below links:
http://kevingreeneitblog.blogspot.com/2011/10/managing-and-monitoring-system-center.html
http://damatisystemcenter.com/2013/10/14/monitor-data-protection-manager-2012-using-scom-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li -
I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
Event ID: 10005
Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
Event ID: 1008
The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
first DWORD in the attached data.
Any idea why I receive this error?
Thanks
MikeHi,
Please refer to this article:
SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
Alex Zhao
TechNet Community Support -
Upgrade from SCCM 2012 SP1 CU4 to R2 Fails - Unsupported Upgrade Path
Hi everybody,
I'm currently upgrading our SCCM infrastructure to SCCM 2012 R2 after have finished with the upgrade from SCCM 2012 RTM to SP1 CU4, thus far everything works fine, but when I try to update any
of the site servers, whether CAS or Primary, I'm getting the following error message in the Prerequisites Check:
I've gone through the system requirements and prerequisites over and over again and I can assure you that every possible update, supported OS, feature set, SQL Server, check list, etc,
etc, have been followed as per the official documentation available, however I'm stuck in this point, and surely enough I haven't been able to find out a similar case.Additionally I'm adding
the ConfigMgrPrereq log (the relevant portion of it) in case someone could kindly take a look at it.
<04-25-2014 02:06:46> ******* Start Prerequisite checking. *******
<04-25-2014 02:06:47> ********************************************
<04-25-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade,
minimum supported installed build version is [7804].
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Unsupported upgrade path; Error;
Configuration Manager has detected that one or more sites in the hierarchy are installed with a version of Configuration Manager that is not supported for upgrade.
<04-25-2014 02:07:00> INFO: This rule only apply to primary site, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Active Replica MP; Passed
<04-25-2014 02:07:00> INFO: This rule only applies to primary or secondary site in hierarchy, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Parent site replication status; Passed
<04-25-2014 02:07:00> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:00> ===== INFO: Prerequisite Type & Server: SQL:INFPROSCCMCDB.usersad.everis.int
=====
<04-25-2014 02:07:00> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;
SQL Server sysadmin rights; Passed
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int; SQL Server sysadmin rights
for reference site; Passed
<04-25-2014 02:07:00> INFO: CheckLocalSys is Admin of <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Site server computer account administrative rights; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server security mode; Passed
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: OS version:601, ServicePack:1.
<04-25-2014 02:07:09> INFO: Target computer is a Windows server.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Unsupported site server operating system version for Setup; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Domain membership; Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Pending system restart; Passed
<04-25-2014 02:07:09> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: Return code:0, Major:10, Minor:50, BuildNum:4000
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server version; Passed
<04-25-2014 02:07:09> INFO: Get Sql edition:Enterprise Edition.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Edition; Passed
<04-25-2014 02:07:09> INFO: Checking Tcp is enabled to Static port, SQL Server:INFPROSCCMCDB.usersad.everis.int,
Instance:.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Tcp Port; Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is limited.
<04-25-2014 02:07:09> INFO: SQL Server memory is limited.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Configuration for SQL Server memory usage; Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<04-25-2014 02:07:09> INFO: Installing the central administration site or primary site, requires SQL
Server to reserve a minimum of 8 gigabytes (GB) of memory.
<04-25-2014 02:07:09> WARN: SQL Server minimum memory is 8000 MB.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int; SQL Server process memory allocation;
Warning; Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by
using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio. For more information about how to set a fixed amount of memory, see
http://go.microsoft.com/fwlink/p/?LinkId=233759.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Case-insensitive collation on SQL Server; Passed
<04-25-2014 02:07:09> INFO: Check Machine FQDN: <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFO: getaddrinfo returned success.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Validate FQDN of SQL Server Computer; Passed
<04-25-2014 02:07:09> INFO:CheckSupportedFQDNFormat <INFPROSCCMCDB.usersad.everis.int>
<04-25-2014 02:07:09> INFO: NetBIOS <INFPROSCCMCDB>
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Primary FQDN; Passed
<04-25-2014 02:07:09> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:09> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:09> ===== INFO: Prerequisite Type & Server: SDK:INFPROSCCMCMS.usersad.everis.int
=====
<04-25-2014 02:07:09> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:09> INFO: The rule 'Administrative rights on site system' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: The rule 'Unsupported site server operating system version for Setup' has
been run on server 'INFPROSCCMCMS.usersad.everis.int', skipped.
<04-25-2014 02:07:09> INFO: The rule 'Domain membership' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> INFO: Windows Cluster not found on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Failover Cluster; Passed
<04-25-2014 02:07:10> INFO: The rule 'Pending system restart' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:10> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Deployment Tools installed; Passed
<04-25-2014 02:07:10> INFO: CheckAdkWinPeInstalled on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int; Windows Preinstallation Environment
installed; Passed
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
SMS Provider machine has same domain as site server; Passed
<04-25-2014 02:07:10> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:10> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:10> ***************************************************
<04-25-2014 02:07:10> ******* Prerequisite checking is completed. *******
<04-25-2014 02:07:10> ******************************************<04-25-2014 02:07:10> INFO: Updating
Prerequisite checking result into the registry
<04-25-2014 02:07:10> INFO: Connecting to INFPROSCCMCMS.usersad.everis.int registry
<04-25-2014 02:07:10> INFO: Setting registry values
If you wonder whether it might be related to this error:
-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade, minimum supported installed build version is [7804].
I confirm that this one site is a secondary one that's attached to a primary site and this log is from the CAS server, I managed to tall it and delete it from that site, but still appears listed
on the CAS management console, any idea how to force the removal of a secondary site that's attached to a primary from the CAS site when it has been removed already from said primary?
I've already tried the
Preinst /DELSITE XXX command but it only works when the site to remove it's attached to the local site and certainly not from a CAS
Finally, the version, build number and everything is correct, no idea what could be the problem, does anybody know a way to bypass this or force the re-evaluation of this rules, I've got
the impression that it's being cached somehow.
Any help would be highly appreciated,
Thank you.
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSEHello again everybody,
I've finally managed to fix this up, in the end I had to delete those entries manually from the database as Garry suggested. After this was done the upgrade has gone through as expected with no further ado and has finalized already, now moving on to the
primary sites.
If anybody out there is facing the same issue, what I did was to delete those "stubborn" records executing the following statements over the CAS database:
DELETE
FROMServerDataWHERESiteCode='XXX'
DELETE
FROMSC_SiteDefinitionWHERESiteCode='XXX'
And this is pretty much about it. I'd recommend to take a proper backup first though as best practice.
Thank you all anyways for your answers and comments,
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE -
Is there way to Monitor Live camera from SCOM 2012 R2
Is there way to Monitor Live camera from SCOM 2012 R2 ?
Thanks
Raja R
Raja RDepends what it is that you want to monitor?
If it's an IP camera that supports SNMP, you can monitor multiple components, depending on the manufacturer (e.g. # images captures, uptime in hours, ...).
If it doesn't support SNMP, you can monitor it through ICMP (ping). Then it's only possible to monitor the state of the device (up/down) depending on wether scom receives a ping reply or not.
If it's a coaxial camera or something else, not connected to a network, it's not possible to monitor the camera itself. Might be possible to monitor the computer/DVR that records the images. -
Can I upgrade from 10.2.8 directly to Tiger 10.4.6?
If I can't upgrade from 10.2.8 directly to Tiger, what do I need to do first and how?
Thanks for you help!You should be able to. Is the Tiger installer disk a retail version? Can your ibook read a DVD? You didn't indicate which iBook. Have you sufficient ram and hard drive space?
-
Server 2012 X64 R2 DNS Server keeps shutting down after inplace upgrade from Server 2012 X64
Hi,
ever since upgrading from Server 2012 X64 to Server 2012 R2 X64 my dns server keeps shutting down every several minutes before having to do a restart. When viewing the event log this is all I see..
The DNS Server service terminated unexpectedly. It has done this 497 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
if I look in the Application Error Log, I will also find the following:
Faulting application name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
Faulting module name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
Exception code: 0xc0000005
Fault offset: 0x000000000010b0e0
Faulting process id: 0x1740
Faulting application start time: 0x01cf531b2e3a7f5e
Faulting application path: C:\Windows\system32\dns.exe
Faulting module path: C:\Windows\system32\dns.exe
Report Id: 90a4ab37-bf0e-11e3-9446-003048df3f03
Faulting package full name:
Faulting package-relative application ID:
I have tried removing and then reinstalling the DNS Server role, but the same situation occurs..
thanks,Hi,
I'm going crazy, I've upgraded my Server 2012 Standard to Server 2012 R2 Standard and now my DNS server keeps crashing since the in place upgrade. I have finally narrowed it down to it only crashes after several minutes if I load the data from
a file instead of the registry. As a test I:
-1- killed all my dns data,
-2- uninstalled the dns server role
-3- deleted the /windows/system32/dns directory
-4- reinstalled the DNS server role
-5- used the wizard to create a DNS server and a forward zone.
everything works okay, no crashes, then I change the advanced propertied of the DNS server to load from file, restart the DNS server and once again it crashes every 2 minutes..
Please help, this is killing me..
thanks in advance.. -
Exchange 2013 CU2, Alert for OWA Health set unhealthy from SCOM 2012
I am facing issue in Exchange 2013 CU2, I got this alert from SCOM 2012 atleast 5-6 times a day, OWA health set is unhealthy, I have done all the steps mentioned in this web link. Authentication type for OWA Virtual directory is integrated windows and Basic.
I have 2 CAS servers, and this alert generated from both of them.
http://technet.microsoft.com/en-us/library/ms.exch.scom.OWA(EXCHG.150).aspx?v=15.0.712.24
Alert: Health Set unhealthy
Source: EX-CAS - OWA
Path: EX-CAS;EX-CAS
Last modified by: System
Last modified time: 1/5/2014 8:15:08 PM
Alert description: Outlook Web Access logon is failing on ClientAccess server EX-CAS.
Availability has dropped to 0%. You can find protocol level traces for the failures on C:\Program Files\Microsoft\Exchange Server\V15\Logging\Monitoring\OWA\ClientAccessProbe.
Incident start time: 1/6/2014 4:05:08 AM
Last failed result:
Failing Component - Owa
Failure Reason - CafeFailure
Exception:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
Microsoft.Exchange.Net.MonitoringWebClient.ScenarioException:
Failure source: Owa
Failure reason: CafeFailure
Failing component:Owa
Exception hint: CafeErrorPage: CafeFailure Unauthorized Inner exception: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
WebExceptionStatus: Success
GET https://localhost/owa/ HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
Accept: */*
Cache-Control: no-cache
X-OWA-ActionName: Monitoring
Cookie:
HTTP/1.1 401 Unauthorized
request-id: 211474d2-a43e-4fab-8038-3aab35353568
X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
X-Powered-By: ASP.NET
X-FEServer: EX-CAS
Date: Mon, 06 Jan 2014 04:14:47 GMT
Content-Length: 0
Response time: 0s
---> Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException
ErrorPageFailureReason: CafeFailure, RequestFailureContext: FailurePoint=FrontEnd, HttpStatusCode=401, Error=Unauthorized, Details=, HttpProxySubErrorCode=, WebExceptionStatus=
Microsoft.Exchange.Net.MonitoringWebClient.CafeErrorPageException: An error occurred on the Client Access server while processing the request
WebExceptionStatus: Success
GET https://localhost/owa/ HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 9.0; Windows NT 6.1; MSEXCHMON; ACTIVEMONITORING; OWACTP)
Accept: */*
Cache-Control: no-cache
X-OWA-ActionName: Monitoring
Cookie:
HTTP/1.1 401 Unauthorized
request-id: 211474d2-a43e-4fab-8038-3aab35353568
X-FailureContext: FrontEnd;401;VW5hdXRob3JpemVk;;;
Server: Microsoft-IIS/7.5
WWW-Authenticate: Negotiate,NTLM,Basic realm="localhost"
X-Powered-By: ASP.NET
X-FEServer: EX-CAS
Date: Mon, 06 Jan 2014 04:14:47 GMT
Content-Length: 0
Response time: 0s
--- End of inner exception stack trace ---
at Microsoft.Exchange.Net.MonitoringWebClient.BaseExceptionAnalyzer.Analyze(TestId currentTestStep, HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, Action`1 trackingDelegate)
at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.AnalyzeResponse[T](HttpWebRequestWrapper request, HttpWebResponseWrapper response, Exception exception, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndSend[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse, Boolean fireResponseReceivedEvent)
at Microsoft.Exchange.Net.MonitoringWebClient.HttpSession.EndGet[T](IAsyncResult result, HttpStatusCode[] expectedStatusCodes, Func`2 processResponse)
at Microsoft.Exchange.Net.MonitoringWebClient.Authenticate.AuthenticationResponseReceived(IAsyncResult result)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
at Microsoft.Exchange.Net.MonitoringWebClient.Owa.OwaLogin.AuthenticationCompleted(IAsyncResult result)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Net.MonitoringWebClient.BaseTestStep.EndExecute(IAsyncResult result)
at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Bool
States of all monitors within the health set:
Note: Data may be stale. To get current data, run: Get-ServerHealth -Identity 'EX-CAS' -HealthSet 'OWA'
State
Name
TargetResource HealthSet
AlertValue ServerComponent
NotApplicable OwaCtpMonitor
OWA
Unhealthy None
States of all health sets:
Note: Data may be stale. To get current data, run: Get-HealthReport -Identity 'EX-CAS'
State
HealthSet
AlertValue LastTransitionTime
MonitorCount
NotApplicable ActiveSync
Healthy 1/3/2014 5:21:13 AM
2
NotApplicable AD
Healthy 11/24/2013 6:54:18 AM
10
NotApplicable ECP
Healthy 1/5/2014 3:03:05 AM
1
Online
Autodiscover.Proxy
Healthy 11/20/2013 10:06:37 AM
1
NotApplicable Autodiscover
Healthy 1/3/2014 10:18:17 PM
2
Online
ActiveSync.Proxy
Healthy 11/20/2013 10:06:37 AM
1
Online
ECP.Proxy
Healthy
11/21/2013 6:16:08 PM 4
Online
EWS.Proxy
Healthy 11/20/2013 10:06:37 AM
1
Online
OutlookMapi.Proxy
Healthy 11/24/2013 6:54:28 AM
4
Online
OAB.Proxy
Healthy 11/19/2013 7:14:34 PM
1
Online
OWA.Proxy
Healthy 11/20/2013 10:06:37 AM
2
NotApplicable EDS
Healthy 1/3/2014 5:19:56 AM
10
Online
RPS.Proxy
Healthy 1/3/2014 5:21:27 AM
13
Online
RWS.Proxy Healthy
1/3/2014 5:20:09 AM 10
Online
Outlook.Proxy
Healthy 1/3/2014 5:21:12 AM
4
NotApplicable EWS
Healthy 1/3/2014 10:18:17 PM
2
Online
FrontendTransport
Healthy 1/5/2014 3:47:09 AM
11
Online
HubTransport
Healthy 1/5/2014 3:47:09 AM
29
NotApplicable Monitoring
Unhealthy 1/5/2014 4:05:57 AM
9
NotApplicable DataProtection
Healthy 1/3/2014 5:25:42 AM
1
NotApplicable Network Healthy
1/4/2014 1:51:16 PM 1
NotApplicable OWA
Unhealthy 1/5/2014 8:05:08 PM
1
NotApplicable FIPS
Healthy 1/3/2014 5:21:12 AM
3
Online
Transport
Healthy 1/5/2014 4:11:00 AM
9
NotApplicable RPS
Healthy 11/20/2013 10:07:12 AM
2
NotApplicable Compliance
Healthy 11/20/2013 10:08:10 AM
2
NotApplicable Outlook
Healthy 11/21/2013 6:12:54 PM
2
Online
UM.CallRouter
Healthy 1/5/2014 3:47:10 AM
7
NotApplicable UserThrottling
Healthy 1/5/2014 4:16:42 AM
7
NotApplicable Search
Healthy
11/24/2013 6:55:06 AM 9
NotApplicable AntiSpam
Healthy 1/3/2014 5:16:43 AM
3
NotApplicable Security
Healthy 1/3/2014 5:19:28 AM
3
NotApplicable IMAP.Protocol
Healthy 1/3/2014 5:21:14 AM
3
NotApplicable Datamining
Healthy 1/3/2014 5:18:34 AM
3
NotApplicable Provisioning
Healthy 1/3/2014 5:19:56 AM
3
NotApplicable POP.Protocol
Healthy 1/3/2014 5:20:44 AM
3
NotApplicable Outlook.Protocol
Healthy 1/3/2014 5:19:46 AM
3
NotApplicable ProcessIsolation
Healthy 1/3/2014 5:19:26 AM
9
NotApplicable Store
Healthy 1/3/2014 5:20:38 AM
6
NotApplicable TransportSync
Healthy 11/24/2013 6:53:09 AM
3
NotApplicable MailboxTransport
Healthy 1/3/2014 5:21:11 AM
6
NotApplicable EventAssistants
Healthy 11/21/2013 6:22:01 PM
2
NotApplicable MRS
Healthy 1/3/2014 5:20:29 AM
3
NotApplicable MessageTracing
Healthy 1/3/2014 5:18:15 AM
3
NotApplicable CentralAdmin
Healthy 1/3/2014 5:17:25 AM
3
NotApplicable UM.Protocol
Healthy 1/3/2014 5:17:08 AM
3
NotApplicable Autodiscover.Protocol
Healthy 1/3/2014 5:17:13 AM
3
NotApplicable OAB
Healthy 1/3/2014 5:20:51 AM
3
NotApplicable OWA.Protocol
Healthy 1/3/2014 5:20:52 AM
3
NotApplicable Calendaring
Healthy 11/24/2013 6:56:59 AM
3
NotApplicable PushNotifications.Protocol
Healthy 11/21/2013 6:16:05 PM
3
NotApplicable EWS.Protocol
Healthy 1/3/2014 5:19:07 AM
3
NotApplicable ActiveSync.Protocol
Healthy
1/3/2014 5:20:16 AM 3
NotApplicable RemoteMonitoring
Healthy 1/5/2014 3:47:09 AM
3
Any solution for this alert, how to rectify it, but OWA is running perfect for all users.Hi,
Sorry for the late reply.
Do we have Exchange 2010 coexistence?
If it is the case, I know the following known issue:
Release Notes for Exchange 2013
http://technet.microsoft.com/en-us/library/jj150489%28v=exchg.150%29.aspx
Please note the "Exchange 2010 coexistence" session.
If it is not related to our problem, please check the IIS log.
If there is any detailed error code, like 401.1, 401.2, please let me know.
Hope it is helpful
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Question on upgrading to SCOM 2012 R2 form SCOM 2012 SP1
Hello!
I planned upgrade to SCOM 2012 R2 form SCOM 2012 SP1.
Should I install any or last update rollup package to my SCOM 2012 SP1, before upgrading to SCOM 2012 R2 ?It is highly recommend that you has install most updated CU before upgrade SCOM 2012 sp1 1 to SCOm 2012 R2 but it is not necessary. You should view NEPA PFE Team blog that demostrate how to upgrade SCOM 2012 SP1 with CU4 to SCOM 2012 R2.
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
Roger -
Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.Hi all.
I want to know if is it possible to upgrade a domain controller from Windows Server 2008 r2 to 2012 r2 installing from SCCM 2012.
Thanks.
Regards.
Anything is possible if you can script it. You could create a task sequence to do the following (with scripts):
1. Demote 2008R2 DC to member server
2. Remove 2008R2 member server from domain
3. Build new 2012R2 member server and join to domain
4. Promote 2012R2 member server to DC
You can do this. However, why would you? Just because you can doesn't mean you should. In my opinion it's more trouble and testing than it's worth. How many times would you need to do this?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Maybe you are looking for
-
Flex 15D errored within an hour of purchase with winload.efi
I unboxed my new Flex 15D an hour ago, very pleased with it, until it rebooted to install windows 8.1 updates. When it rebooted I ended up at a blue screen saying that the file \windows\system32\winload.efi is missing. Enter just loops back to the er
-
Trigger which fire on a specific time ?
Hello expert, my requirement is to automatically cancel requisition's which are older than 3 day's. for this i have to create some trigger. i created a trigger on database startup , but if i do not restart my server than it will not work. i also have
-
SCOM 2012 SP1 Cisco Port Security Violations
Hello, I'm fairly new to System Center but have learning quite a bit over the last year. I am looking for some information on how to generate an alert off of a port-security violation. There's not much information about this so i'm wondering if any
-
Hi all, I am trying to create a transaction variant for one of the SAP std transaction and when I execute tcode shd0 and put the tcode there and hit the create button I get the following error message: Variants are possible only for dialog transactio
-
Restore itune on my ipod touch
i eased me itune on my ipod and now im trying restore it on my ipod touch again