Upgrade from Solaris 5.4.8 to Solaris 10
Hello
I have a SUN Ultra 10 box which I am trying to upgrade to v10. I have downloaded Solaris 10 software (for SPARC platforms) from the SUN website, burned the software onto a DVD -R and then tried to install it. When I get to the 'ok' prompt I type the 'boot cdrom' command and the following error message appears:
'Unable to open device...'
My machine then automatically boots from the hard disk and loads the older Solaris version (5.4.8)
Any ideas?
Can't read disk label
Can't open disk label package{code}
Classic symptoms of an improperly created DVD.
This next link was written for people to install Solaris on thsir PCs.
It's valid for your situation as well:
"Solaris Operating System - Download and Burning Instructions"
*http://www.sun.com/software/solaris/download_instruction.xml*
There isn't a Solaris "v8" .
What's so difficult about actually answering the questions presented to you?
How much Ram _do_ you have?
(I'm done with this thread.)
Similar Messages
-
Stability issues after upgrade from 5 to 6.1?
Dear all,
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.
Many thanks in advance
Andreas"Andreas Raab" <[email protected]> wrote in message news:[email protected]..
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.Hi Andreas,
Normally proving that rumors are true is a responcibility of
rumors suppliers. Reverse does sound to me like a joke.
Regards,
Slava Imeshev
P.S. Current weblogic 6.1 is a stable product. -
Upgrade from Solaris 8 (5.8) to 5.10 fails
Hi everyone...
Here is a curly one for the Sun gurus.
I attempted to perform the upgrade from Sol 8 (Dec/02) to Sol 10 (from the CD/DVD Jan/06) and got all the way past the "Test Upgrade Profile". The initialize started after I clicked onto the gui "Install Now" button. However, it fails after an hour or so - each an every time.
We have the 4.2.1 DiskSuite defined on a 3310 disk array and well as the 2 system disks - which are striped and mirrored. I can not do a Live Upgrade as I don't have a spare disk, so Sun Support in India suggested I do the upgrade in place...but is crashs attempting to copy files from the CD to the Server, as well as , so other strange error messages?
The first attempt was to leave vfstab untouched, the 2nd was to comment out the disk array (D30, D31, & D32) devices. But both fail. The install logs will be uploaded.
vfstab:
=============>
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr ufs 1 yes -
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/md/dsk/d1 - - swap - no -
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no logging
/dev/md/dsk/d3 /dev/md/rdsk/d3 /var ufs 1 no logging
/dev/md/dsk/d4 /dev/md/rdsk/d4 /archive ufs 2 yes logging
/dev/md/dsk/d7 /dev/md/rdsk/d7 /export/home ufs 2 yes logging
/dev/md/dsk/d6 /dev/md/rdsk/d6 /usr/openv ufs 2 yes logging
/dev/md/dsk/d30 /dev/md/rdsk/d30 /software ufs 2 yes logging
/dev/md/dsk/d31 /dev/md/rdsk/d31 /databases ufs 2 yes logging
/dev/md/dsk/d32 /dev/md/rdsk/d32 /spare ufs 2 yes logging
swap - /tmp tmpfs - yes -
=================<
The install_log show weird errors that stop the upgrade.
See below
==========>
Error opening file /a/var/sadm/system/admin/CLUSTER.
getInstalledPkgs: Unable to access /a/var/sadm/pkg
copyOldClustertoc: could not copy /a/var/sadm/system/admin/.clustertoc to /tmp/clustertocs/.old.clustertoc
Error:
Error: ERROR: The specified root and/or boot was not found or was not upgradeable
Pfinstall failed. Exit stat= java.lang.UNIXProcess@20ca8b 2
word must be specified if an upgrade with disk space reallocation is required
Processing profile
Checking c2t0d0s0 for an upgradeable Solaris image
Unable to start Solaris Volume Manager for unknown, c2t0d0s0 is not upgradeable
ERROR: The specified root and/or boot was not found or was not upgradeable
==================<
Now initially I had to add a number of packages/patches via the note 72099 that was displayed at the very beginning of the Sol 10 upgrade. Also, do and check the necessary bits via document 16141-1.
But the upgrade just fails. I would like to keep the disk array and its data intact for the upgrade as it has Oracle 11i Apps databases and its a bit of work redefining the metastat and loading Oracle, and the other bits it needs, as well as Netbackup etc.
So, are there are any bright sparks out there that can help?
Please email me.
Cheers
Roger Sager
Oracle 11i Apps DBA
Sydney, AustraliaUpload of final install log file (as included in 1st topic discussion)
-
Upgrade from Solaris 8 to Solaris 10
What are the points to take care of when migrating the system from Sun Solaris v 8 to Sun Solaris v 10?
Any help would be greatly appreciated.The Operating System upgrade Guide should be supplied by your OS vendor; Sun in this case. The Notes that are released are the ones found under Solaris 10.
-
Solaris 10 upgrade from U3 to U8
Hi Gurus,
I need to upgrade solaris 10 from U3 to U8, we tried a unsuccessful failure
after creating a boot environment when we tried to upgrade from DVD 10/09
with command
luupgrade -u BE -s /cdrom
it complaint about a one file in some path (not sure the exact file name)
/cdrom/SOLARIS_10/TOOLS/BOOT/PLATFORM/SUN4U
has anyone see this error before and
when we tried to upgrade from DVD directly with command
ok>boot cdrom -upgrade
it never asked me if i want to upgrade and do a fresh installation it just installed fresh OS.
any help is much apprecited.
BR,
Kapil+With latest version of live upgrade you need to add -k <sysidcfg file> to upgrade line. The following is the
luupgrade command line that I most recently used
luupgrade -u -n <ABE name> -k /root/sysidcfg -s /cdrom/cdrom0
I have attached file that explains entries in sysidcfg.
Below is the sysidcfg file that I created for this servers.
root@xxxx # cat sysidcfg
name_service=DNS
domain_name=xx.xx.xx
name_server=xx.xx.xx.xx
network_interface=ge0 { hostname=xxx
ip_address=xx.xx.xx.xx
netmask=255.255.255.0
protocol_ipv6=no
default_route=xx.xx.xx.xx}
keyboard=US-English
system_locale=en_US
timezone=US/Central
terminal=sun-cmd
system_locale=C
Make sure that you get on the console when you reboot to the new OS. I always get some dumb question, such as "What is the terminal type?", when I upgrade the os.
You probably want to do an ls /cdrom (or whatever) and you should get something similiar to the following:
$ ls
Copyright boot
GPL_LGPL_Source_Offer.txt installer
Solaris_10 platform
Edited by: Paisley on Dec 15, 2010 8:19 AM -
Live upgrade from solaris 8 to 10
how do i upgrade from solaris 8 to 10 using live upgrade on a sun netra t1 machine?
THere is a good intro to LU at
http://www.sun.com/bigadmin/collections/installation.html
beyond that, see docs.sun.com -
Upgrading from Solaris 8 to Solaris 10
Hi
I am in the process of upgrading from Solaris 8 to 10 on a sparc server.
What I would like to know if anyone has experienced compatibility issues during the upgrade with the Korn and C Shell as well as perl.Upgrades from either Solaris 8 or 9 are supported (see the Release Notes http://docs.sun.com/app/docs/doc/817-0552 section on "Changes in Upgrade Support for Solaris Releases").
As for whether to upgrade or install anew, it depends. If you just want to have the system set up as much as possible like it is now except with the new OS, upgrade. If you'd like a chance for a fresh start, where you may have to do some work re-applying configuration and other changes you made, but end up leaving behind some old changes you no longer need, then an initial install might be appropriate. -
Upgrading from Solaris 7 to Solaris 8 on an Ultra 60
I am currently investigating upgrading an Ultra 60 machine from Solaris 7 to Solaris 8. I would like to save the data on the machine, if possible. Is there any way to do this? The only thing that I can find is downloads to get the entire Solaris 8 on three CDs, and it doesn't sound like it would save the data on the disk. (Though I don't know - this is the first time that I am upgrading from 7 to 8.) Any links of answers would be greatly appriciated.
Thanks!You're talking about 2 different things.
1. Downloading and "burning" CD images
2. Upgrading from Sol 7 to Sol 8.
Once you have successfully downloaded, burned and tested your CD's then you can use them to Upgrade your system. You do not need to download or burn the Installation CD. You only need CD 1 of 2 and 2 of 2. You should probably test these CD's with an Initial Install on a system you don't care about.
Once the CD's have been tested then you can use them to Upgrade. You should see the option of Initial Install or Upgrade after you have answered all the sysid questions. Please note that you should not even think about an Upgrade unless you have done a level 0 ufsdump of your entire boot disk to a local tape drive. You may need it in case you have to resize your partitions if Solaris 8 doesn't fit into your existing filesystems. -
Upgrading from Solaris 10 Update 2 to Update 7 (05/09) on V125
I am trying to upgrade a V125 from Solaris 10 Update 2 to Solaris 10 Update 7. When the installer runs, it does not give me a choice for upgrading. I have tried also using text mode (boot cdrom - text) with no luck. Anyone else run into this?
Best!
FrankYou should update all the way to 10.5.8 using the combo updater, which you can download from here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
Do I have to buy iLife 09 outright?
Yes.
Can I buy just iMovie 09?
Nope!
Lastly, you have plenty of RAM. The only way to increase this would be to sell your two ram sticks on eBay and buy two new 2GB sticks. -
Upgrade from Solaris 10 06/06 to Solaris 10 11/06
Hi,
I need to upgrade from Solaris 10 06/06 to Solaris 10 11/06
What's the best way of doing this? I looked up Live Upgrade and regular update.
It seems like an upgrade is exactly the same as a fresh install. Use a DVD and boot from it.
For the Live Upgrade I can upgrade while system is in production.
Shouldn't this type of upgrade (same main release, just updated) be easy, like updating packages or patching the system?
Any comments, maybe I missed something major like upgrading by just adding a few simple packages and rebooting.When I try an upgrade, I never get prompted to
upgrade.
I get all the way to the point where it asks which
disk to install to.There are various things that can disable the upgrade option, but the installer is very opaque about what it's doing.
The most common thing is if /etc/vfstab can't be easily parsed to find all the OS filesystems. If there's any strange mounts that aren't OS related, you might want to remove them from /etc/vfstab and just make sure that you preserve the location that the data resides.
You need to have one and only one partition visible on your disks with tag 'root'. I think that confuses the upgrade if there's more than one.
Is the upgrade option after this? From the manuals I
got that all info such as hostname, ip and everything
else should be recognized from previous installs.
But it asks me to input all of these.It's after the host identification section, but at the beginning of the Solaris installation section.
So if it's asking for cluster level or which disks, it's past the point.
Darren -
Hi all
I have read next monday solaris 10 6/06 will be launched worldwide, including new and waited zfs v. 1.0.
I have been using my solaris 10_x86 1/06 for some time ago... and I was wondering if it would be possible to upgrade my system (not re-installing it from zero) or even, install ZFS as install-alone packages??
Someone knows if it will be possible?The Solaris install program have an upgrade option, which you can use to upgrade from 1/06 to 6/06...
7/M. -
Upgrading from Solaris 10 s10_72 (beta) so patches work
Hi,
What is the recommended way to go from
Solaris 10 s10_72 X86 (beta) to a release that I can actually patch?
Thanks!So I took the upgrade option from the 6/05 release I downloaded today from the Express program.
Now:
god@irt-v20z-01:autopatch 4:35pm 56 # cat /etc/release
Solaris 11 nv_15 X86
Copyright 2005 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 17 May 2005
Can I assume pca does not identify any patches for Solaris 11.
Am I now on a patchable a supportable platform?
(Previous threads had said there was no upgrading from Beta - but I appear to have done it with 6/05)
Thanks! -
Cannot upgrade from 9i databases to 10.2.0.3 on Solaris
You cannot upgrade from Oracle 9.2 database to 10.2.0.3 on Solaris. You can upgrade to 10.2.0.2, then to 10.2.0.3 There is a serious problem though doing a direct upgrade, the database will not function. You get
ORA-06512: at "SYS.UPGRADE_SYSTEM_TYPES_FROM_920", line 1
Has anyone got around this problem yet? Metalink is trying to fix the problem, but hasn't had any luck yet. Tired of having two different 10G directories on servers when migrating databases. Also was horrible during the first upgrade to discover the problem. It has been tested and is a known problem with the Oracle 10.2.0.3 patch (along with 2 other bad issues on 10.2.0.3 patch).I have had no issues going from 9.2.0.7 to 10.2.0.3 three weeks ago in our staging environment, since then I have not seen any problem.
Installed 10.2.0.1 base applied 10.2.0.3 pactchset to the same oracle home.
The catupgrd.sql script upgraded the following components in my database.
Oracle Database 10.2 Upgrade Status Utility 05-23-2007 01:43:07
Component Status Version HH:MM:SS
Oracle Database Server VALID 10.2.0.3.0 00:24:36
JServer JAVA Virtual Machine VALID 10.2.0.3.0 00:10:50
Oracle XDK VALID 10.2.0.3.0 00:03:19
Oracle Database Java Packages VALID 10.2.0.3.0 00:00:40
Oracle XML Database VALID 10.2.0.3.0 00:03:06
Oracle Workspace Manager VALID 10.2.0.1.0 00:01:24
Total Upgrade Time: 00:46:32
And since than we haven't seen any issues with our staging databases.
Thanks,
Ramki
Message was edited by:
ramkireddy -
Upgrading from 8.1.7.4 to 9.2 on Solaris
We want to do an upgrade from 8.1.7.4 to 9.2 on a Solaris server. We want to convert the existing DB (not do an export/import) Down time is not an issue. I understand that to do this we install new Binaries and run a conversion script.
How do we do this?Hi,<br>
<br>
I advise you to read Upgrading a Database to the New Oracle9i Release<br>
Install binaries into a new ORACLE_HOME directory, then use DBUA or manual upgrade.<br>
<br>
Nicolas. -
IDS5.1 SP1 upgrade from 5.1 - Solaris
Hi,
We are trying to upgrade from 5.1 to 5.1 SP1 on Solaris. Ran the idsktune, and installed necessary patches. Made sure that admin server and slapd is running before istallation. Got the following error
ERROR: Could not update Directory Server Instance
URL ldap://ldaptest.server.com:389/o=NetscapeRoot user id admin DN cn=slapd-ldaptest-ldap01-389, cn=iPlanet Directory Server, cn=Server Group, cn=ldaptest.server.com, ou=server.com, o=NetscapeRoot (19:Constraint violation)
ERROR. Failure installing iPlanet Directory Server. Do you want to continue [n]?
Any Ideas ?
Thanks
Chandra mouli.Hi,
Was this problem ever resolved? I'm having an almost identical problem when upgrading 5.1 to 5.1sp1 (gives a 153:unknown error rather than 19). We're running Solaris 8, local hosts, no NIS, no DNS.
Cheers
Simon
Maybe you are looking for
-
Help me With my MacBook please!!!
I was listening to recently downloaded music on my MacBook last night when all of a sudden the screen went black stopped the music and beeped about 9 or 10 times. Now whenever I try to start it up again the screen stays black and beeps the same amoun
-
Need help on JSP pages!!!!!
Hi, I have a column named "status" in a table stored in a database. this column hold an int value, either 0 or 1 0 means the staff is in an "inactive" status where 1 is just the contrast. I have the following statements in theJSP page, the <c:out val
-
Hi guys i am coding this Sales program. The program asks the user for the sales of two weeks. I want to access the elements of the matrix, so i can make comparations; for example: which sale is the highest sale,etc. how can i solve this? this is the
-
Business requirment IFRS related updation in the system
Dear Friends, We are in New GL environment now business want to maintain the IFRS environment in the system currently we have maintain 1. parallel ledger for IFRS 2.New Depreciation Key we have required details path to maintain the business IFRS wor
-
How to retain data in Delta after extraction
Hi Experts, We are suppose to extract delta from same datasource for multiple cubes ... from the source system only ... now after we extract delta for cube A, there is another cube B which is suppose to extract delta from the same da