Upgrade from Tiger - is Clean Install Necessary or Recommended?

Hi Everyone,
I'm going to be updating 3 computers to Snow Leopard from Tiger - 2 MacBook Pros and an iMac.
After talking with several people, I got the impression that the Snow Leopard install would automatically perform a clean install. But after reading several posts on here, I assume this is not the case? Is a clean install recommended?
On one of the MacBook Pros, I will be upgrading the drive to a 500 GB before doing the Snow Leopard update - I am having the drive replacement done professionally, but will do the software update myself. Can I install that directly on the new drive or do other steps need to be taken?

Snow Leopard does not automatically perform what some people mean by a "clean install" meaning that it erases the drive and starts completely from scratch. The standard installation is closest to what older versions of Mac OS X did when using the "Archive and Install", where a completely fresh set of operating system files are installed but all the applications and user accounts (including their settings and documents) are preserved. For most uses, unless you've been having problems with one of the computers, the standard installation procedure should be fine. You'll want to confirm compatibility of all your applications and peripherals before you upgrade, and of course you'll want good backups of the systems. Most of us recommend making a full clone, using a utility such as Carbon Copy Cloner, so that you can easily go back to a working installation should anything go wrong.
You can if you wish do a truly "clean" installation by running Disk Utility from the Snow Leopard installation disk and erasing the drive. But, again unless the systems have been having problems, it's probably not necessary unless you want to clean out the "cruft" of old apps and settings anyway.
Regards.

Similar Messages

Upgrade from Mavericks or clean install ?

Hi
I have an iMac mid 2007 and I always upgraded my OS, I never made a clean installation.
It's, in your opinion, more useful to make a clean installation ?
If yes, what could be the best and faster method to restore mail, accounts and settings various from a backup volume ?
thanks

I've also considered a clean install from Mavericks 10.9.5. I've read that upgrades over time leave unused settings/files from the earlier OS versions and they eventually clutter up your system. I'm not sure about that, but for me starting with a clean slate has some appeal. I clean install is more complicated and error prone, but if you're properly prepared and take your time I think it's relatively straightforward. There are step-by-step instructions at various Mac-oriented web sites.
As you say, once it's done you need to transfer your data to the new system. Besides my Time Machine and 10.9.5 clone disks I have a flash drive with my important folders along with specially created data that would be needed for the transfer such as non-Apple apps, mail folders (exported from the Mail app) and my third-party app data such as my password app database. You would also need to have a copy of your iPhoto library which I would hope you could simply copy over to the new system. I think that mail accounts may need to be recreated by hand - I've not seen a way to export/save them for import into the new system. My non-Apple apps would need to be reinstalled (copied?) and reconfigured. And then there are the system settings that I've made over time that I'd have to try to remember or will notice once I start running Yosemite.
I've tested Yosemite by installing on a flash drive and I've had no issues. My 2013 Air came with Mountain Lion and I've upgraded to 10.9.1 through 10.9.5 with no issues. Upgrade is the easiest process for sure. However I'd like to get some feedback on the true advantages of a clean install.

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the install fails reporting "insufficient memory".
I assume the installation requires more memory than the OS actually needs to be able to run.
I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
You need much more RAM than that.
Leopard system requirements:
http://support.apple.com/kb/SP517

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Mach

I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

http://support.apple.com/kb/TS2986

Upgraded from TIGER to SNOW LEOPARD

Hello,
How can I uprade from TIGER to SNOW LEOPARD? Do I simply use the upgrade snow leopard to do so? Will that create any instability or issues?
thank you very much.
Alex

Yes, you can upgrade from Tiger to Snow by purchasing the SL DVD. Doing so would only create stability problems if you already have problems, so you should be sure you have a clean system before upgrading. See the following:
System Upgrade and Installation Procedure
Basic Caveats
1. Disconnect all peripherals except the original mouse and keyboard.
2. Quit all applications if this is not an installation from an Installer DVD.
3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation you may have to erase the hard drive and reinstall from scratch.
4. Once the installation begins do not use the computer in any way except to reply to dialog prompts or to restart when the installation is completed. This is especially critical during the installation stage known as "Optimizing the System."
System Update Procedure
A. Repair hard drive and permissions.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.2 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
B. Clone your existing system to an external Firewire drive.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the startup or source volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup or source volume to the Source entry field.
5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
7. Double-check you got it right, then click on the Restore button.
C. Decide upon an installation option (This does not apply to Snow Leopard.)
You have three upgrade options. If you use the Upgrade installation option be sure you have repaired the hard drive and permissions first and made your backup. If you choose the Archive and Install option then you only need to repair the hard drive.
Neither of the above options will erase the disk. Some of your software may not work with a new system. You will need to upgrade those programs. It would be best to do the upgrades to your software before upgrading to the new system version.
Personally, I would erase the hard drive and do a fresh install of Snow Leopard then use Migration Assistant to migrate your old Home folder from the backup. This may take some extra time but is less likely to have problems that may be the result of an upgrade installation.

Upgraded from tiger to snow leopard, can I go onto lion?

I have recently upgraded from tiger (I think) to snow leopard, can I go onto lion?
I have a imac 17" 2 GHz Intel Core 2 Duo, 1 GB 667 MHz DDR2 SDRAM, I think I bought it in 2007, I don't use it for much but a bit of browsing storing photos and music and maybe a couple of documents.
I have been told by some that if I go to Lion it would be a risk and slow the computer down, so just wondering what you all think.
Thanks in advance,
Rossi

http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.0-17-inch-spe cs.html
According to unofficial sources, you can upgrade to 4GB RAM. I've done the same in my late 2006 iMac 20" which is offically upgradable to 3GB, but I stuck 2 x 2gb modules in anyway (mainly as I had one spare from my MPB). It's dead easy to do, I'm in the UK and bought Crucial memory which I've always trusted.
I believe the Mac will still only use about 3.3GB of the available 4GB RAM, however some people have reported better performance as both modules are the same size and this helps.
Probably worth getting 2 x 2GB given it's not that expensive. You can always keep your old RAM incase anything goes wrong.
I'd do this regardless of upgrading to Lion or not, the extra RAM will help.
BTW, regardless of a lot of the negativity, I love Lion, it speeded up my other 2007 MBP like it was a new machine. The iMac seems okay, although that is showing a few signs of some graphics glitches, but I don't think this is anything to do with Lion, more about overheating.
Best thing to do, is to clone your existing system (using Disk Utility or SuperDuper or CopyCloner) so that you can boot off that or restore it at anytime without losing anything of your setup.
Then clean install Lion (there are instructions about on how to do this, and create a bootable USB key). You can then migrate back your user settings from your clone to the Lion install. Or just upgrade Snow Leopard. Depends on whether you believe in fresh installing everything.
If you don't like Lion, or it's slow or whatever, you can always restore your snow leopard system from the clone.

Will an upgrade from Tiger 10.4.11 to Snow Leopard make me loose programs?

I have an old 2007 Macbook pro and I need to upgrade from Tiger OS 10.4.11 to either leopard of Snow leopard because my charger broke and the new charger does not work probably in the older laptops unless you firmare update (which I cannot do as my OS is less than 10.5)
My question is: Will upgrading wipe all the files and programs from my laptop? I have programs that I no longer have the discs, to install them with, for so if they get wiped I will be unable to get them back and they are programs I need on a daily basis. I was just wondering what upgrading from tiger to leopard will actually involve? Will I loose all files/programs so it would be like starting from scratch with a new computer? Or would it not change these things?

Buy an external drive (or two).
Clone your system before you begin.
Repair the drive while at it, Apple First Aid and another 3rd party program.
Make sure you can boot from your backup clone.
Apple Restore is part of Disk Utilty or there is SuperDuper, or Carbon Copy Cloner.
Me, I would take the above precautions. Then I would format your drive with SL DVD, and perform and clean install. Do all the updates. Then use Setup or Migration Assistant.
Look for threads, there seems to be 4-5 a week at least on Migrating, going from 10.4 or from PPC to 10.6.
That is the safest. In theory, and YMMV, you could try upgrade in place, but not without backups, and repairing your drive with SL DVD first.

Upgrade from tiger to 10.6.3

Providing I have the memory & intel processor, am I able to upgrade (load) snow leopard 10.6.3 if i have 10.4 tiger, or do I need to 1st load 10.6 then load the 10.6.3? I am pretty sure I cannot go directly any higher than 10.6.3 from tiger correct?

You cannot upgrade beyond Snow Leopard until you upgrade to Snow Leopard 10.6.8. If you plan to upgrade from Tiger, then I suggest you don't actually upgrade but rather erase the drive and do a clean install of Snow Leopard.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Upgrade from tiger to leopard on a power mac G?

can i upgrade from tiger to leopard on a power mac G5?

Yes, however, read about the pitfalls below.
Mac OS X 10.5 was release October 26, 2007. Its 10.5.8 update is the newest operating system available for PowerPC Macs that meet its requirements. It is available occasionally by calling Apple online store's phone number, even though the website does not show it. Many want to upgrade to Leopard because of i-Devices (iPhone, iPad, iPod) bought saying iTunes 10 or later is recommended. To check if that really is required, look at the i-Device requirements section of this tip
If your Mac is Intel, and running 10.4.11 or earlier, and meets the hardware requirements of 10.6, a less expensive upgrade solution is to upgrade to 10.6 directly. No need to upgrade to 10.5 unless your software won't run in 10.6.
Software listed for Intel Mac and PowerPC Macs can run on 10.5 for the platform indicated in the link. For Leopard you need
867 Mhz on a single processor or faster (1 Ghz and higher are faster).
256 MB of RAM (preferably 512MB of more based on arbitrary experience).
9 GB of hard disk space (arbitrary experience adds another 15%) free.
Macs newer than August 28, 2009 can't run Leopard, and require a minimum of Snow Leopard.
Dual booting Mac OS 9 and Mac OS X 10.5, check this tip:https://discussions.apple.com/docs/DOC-1757
Classic is not compatible with 10.5. 10.4.11 on a PowerPC Mac or earlier is needed for Classic.
Mac OS X 10.5 is the earliest version of Mac OS X that will run iTunes 10. This is necessary for numerous i-Devices (iPad, iPhone, and iPods). To find out which require it, see this article
http://en.wikipedia.org/wiki/ITunes_version_history
Should you require only iTunes 9, and are running a minimum of 10.4, backup your data at least twice, check in Apple menu -> About This Mac if you have a G3, G4, G5 (which is PowerPC), or Intel Core (which is Intel) make sure you are running 10.4.11 PowerPC or 10.4.11 Intel (depending on the aforementioned processors), and download iTunes 9.2.1. The only reason you should upgrade to 10.5 is if some other software is required.
Boot Camp is only available on Intel Macs with 10.5 and higher.
Time Machine backup software first appeared in 10.5
You have several options of installation which are explained here: https://discussions.apple.com/docs/DOC-2209
All of which I recommend you backup your data at least twice before upgrading, and have sufficient disk space to install, and all your third party applications and drivers are known to be Leopard compatible, and after backing up your data you dismount and disconnect all but Apple keyboard and mouse and if there is an external display, that too. And just before you install repair permissions.
If any of the above terms confuse you, ask on the Discussions board what they mean, and one of the people who knows will gladly assist you.
You must use the installer disc that looks like *, and does not say Upgrade, Dropin, or OEM, if you choose to upgrade to Leopard.
Message was edited by: a brody

HELP! HOW DO I KEEP LOGIC WHEN UPGRADING FROM TIGER TO SNOW LEOPARD!

So I use a later macbook but have another slightly older one (got it in 2007) that kinda kicked the bucket. I'm now able to use it again (with a new setup). I have Logic express (an older version) but the macbook is running that last version of tiger before leopard. I want to upgrade to snow leopard (which i've learned I can from tiger directly for the low price) but I don't want to lose logic since I payed for it and don't have the install discs anymore.
I don't mind getting rid of everything else but I want to keep the actual program on the comp and just run it in SL. What specifically do I have to do (as far as backing up and all that) to CLEANLY upgrade from tiger to SL but keep logic? I'll have an external HD by the time I'm ready so keep that in consideration.

I have never used Logic Express so I can't help you but if you to the Logic Express Forum and repost over there you might be able to find someone who knows about Logic Express to help you.
Allan

Upgrading from Tiger OS

Read posts below on the new Mac Box Set and another user upgrading from Tiger OS. I have 1GB RAM on my 2006 iMac, but Apple suggests I purchase additional memory for my iMac.
Couple of questions if anyone knows...
1) Is it necessary to add memory or will Mac Box Set run comfortably with 1 GB after upgrade?
2) Where would I look for memory if I elected to do so and how is it installed? By me or a professional...?
Thank you.

You can read the tech specs here:
http://www.apple.com/macosx/specs.html
IMO it will run on 1GB but I'd add another 1 or 2GB stick.
EDIT: both brands sig recommends make excellent RAM and stand behind it.
-mj
Message was edited by: macjack

Is it possible to upgrade from Tiger (10.4) to Leopard (10.5)? Thanks

Wondering if I can upgrade from TIger to Leopard (and then to Lion) on my old Macbook. Don't really want to buy a new notebook when this one works fine. But would like to use some of the features available through Lion (notably iCloud). Thanks.

Hello Judy,
You'd want to skip Leopard/10.5.x totally as it's not needed & expensive since Apple no longer sells it & it was $129.
You can get Snow Leopard/10.6 for $29, then once updated to 10.6.6 or greater buy Lion/10.7 from the App Store, as long as your MacBook meets the requiremenys...
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory[14]
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading[14]
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
http://www.apple.com/macosx/how-to-buy/
What applications are not compatible with Mac OS X 10.7 "Lion"?
http://ow.ly/5Iz09
http://roaringapps.com/apps:table

ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
Any ideas on how to get the iPod recognized again in iTunes under Leopard?

Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Can't play long voice memo after upgrading from Tiger OS to Snow Leopard OS

I have a voice memo that's 1.5 hrs long saved on my computer that I used to be able to play in iTunes & Quicktime, but ever since I upgraded from Tiger OS to Snow Leopard OS, the file will not play anymore. I tried installing quicktime 7 from the snow leopard optional installs but the file still didn't play. I also installed the VLC player which opened the file, but only played 7 minutes of it. When I try to open the file in quicktime it says that it can't play the file and that it is not a movie file, but my file is saved as a ".mov" file. Does anyone know how I can get the file to play again?

I have a voice memo that's 1.5 hrs long saved on my computer that I used to be able to play in iTunes & Quicktime, but ever since I upgraded from Tiger OS to Snow Leopard OS, the file will not play anymore. I tried installing quicktime 7 from the snow leopard optional installs but the file still didn't play. I also installed the VLC player which opened the file, but only played 7 minutes of it. When I try to open the file in quicktime it says that it can't play the file and that it is not a movie file, but my file is saved as a ".mov" file. Does anyone know how I can get the file to play again?

Upgrading from Tiger to SL or ML

Hello all!
I have an old aluminium body MBP 17" Intel Core2Duo 2.4 GHZ with 2 GB of Ram.
It has a 160 GB drive and is a 3,1 model bought around august / sept. 2007.
Call me slow but I haven't upgraded my OS since I bought the machine. I'm still running Tiger (10.4.11) and since I'm going to upgrade my RAM to 4 GB and
harddrive (to 540 GB), I figured I'm also going to upgrade my OS.
As you can imagine having a machine this old, there's a lot of stuff on it I'd hate to loose. So I've
deviced a plan for upgrading my MBP.
It goes like this:
1. Back up my internal drive with Carbon Copy Cloner.
2. Install Snow Leopard on an external drive.
3. Replace the internal drive with the external one.
4. Put the old internal drive into the harddrive dock.
5. Migrate all my files from the now external drive to the new internal one.
Question is, will this work? Is it a fail proof way of doing it?
(The reason I'm upgrading to SL and not Lion is because Mountain Lion is coming out and I'm just going to install that on top of SL instead of going via Lion).
Thanks!

Hi!
Just wanted to say I've successfully upgraded from Tiger (10.4.11) to Mountain Lion (10.8) without problems!
So here's what I did: first I backed up my entire system using Carbon Copy. I did this on two different external drives (you can never be safe enough!). Made sure both booted nicely. Then I downloaded Mountain Lion and installed it onto an external drive 2.5" drive. I booted up to ML and it worked OK. I then swapped the external 2.5" drive with ML on it for my old Tiger 2.5" drive (this took some time but Ifixit had a great "how-to" guide.
Now I'm in the process of copying important files, documents and music while also having to re-download a lot of my old software (since none of them work properly in Mountain Lion). Oh well, that's the price to pay for not upgrading sooner!
Btw - maybe it's the wrong thread to ask in but I had a lot of stickies in Tiger (which I used everyday almost) - and I tried to copy the stickiesdatabase file over to ML but none of my Stickies show up?? I know ML wants us to use Notes instead of Stickies but since Stickies DO come with Mountain Lion, I wonder why I can't find the Stickiesdatabase file in Mountain Lion??
P.S - Have no idea why my username on this forum changed. Oh well.

Upgrade from Tiger - is Clean Install Necessary or Recommended?

Similar Messages

Maybe you are looking for