Upgrade from TREX 6.1 to TREX 7.0
Recently upgraded our Portal Environment from EP 6.0 SPS19 to EP 7.0 SPS14. Our TREX version was 6.1 Rev 32. Installed TREX 7.0 Revision 38.
The upgrade Guide for TREX 6.1 to TREX 7.0 refers to running python script exportHost61_70.py to export the indexes from the TREX 6.1 system. I shutdown the TREX 6.1 system and started the 7.0 TREX system. Executed python script importHost_61_70.py to import the indexes to the 7.0 environment. The scripts ran successfully with no errors. Restarted both the TREX 7.0 and the EP 7.0 system.
When I logged on to the Portal and accessed the Indexing Monitor(System Admin --> Monitoring --> Knowledge Management), the Status of indexes are red. The indexed column displays values for the various indexes. If I display the queue for the index, the queue Status is Invalid. I launched the TREX 7.0 admin tool. The indexes do show up however, the indexes do not show up in the Queue:Admin from the TREX admin tool. The /usr/sap/<SID>/TRX<instance#>/queue directory is empty.
Has anyone encountered this problem using the export/import script from TREX 6.1 to TREX 7.0? We have single host installation.
Hello Noemi,
Please verify that user <sid>adm in the new TREX 7.0 server, is assigned to administrators group of windows local groups, then try again. In addition verify if you can open the file independently of python tool, this is with the windows zip tool.
I'm having an error with import script too. I just sent a message to SAP Support so I wait for what they can tell me. This is the error detail if you can help me.
Thanks and regards.
Jeremias Guzman
D:\usr\sap\TRT\TRX01\exe\python_support>python importHost_61_70.py D:\export\export3.zip D:\temp
[2008-06-09 19:19:37] : Starting import on 7.0 system
[2008-06-09 19:19:37] : Unzipping archive file(s).
[2008-06-09 19:19:37] : Working on file D:\export\export3.zip
[2008-06-09 19:20:05] : Closing zip file
[2008-06-09 19:20:05] : Searching for following zip file D:\export\export3_1.zip
[2008-06-09 19:20:05] : No follow zip archiv found
[2008-06-09 19:20:05] : Finished with zip files
[2008-06-09 19:20:05] : Importing index bibliotecaliderazgo
[2008-06-09 19:20:05] : Error importing indexbibliotecaliderazgo
Traceback (most recent call last):
File "D:\usr\sap\TRT\TRX01\exe\python_support\importHost_61_70.py", line 561,
in ?
test(sys.argv)
File "D:\usr\sap\TRT\TRX01\exe\python_support\importHost_61_70.py", line 538,
in test
land.importIndex(index, exportbasepath)
File "D:\usr\sap\TRT\TRX01\exe\python_support\importHost_61_70.py", line 348,
in importIndex
co.createIndex()
trex.FuzzyException: <trex.ApiError, code 2972, The index is temporary not available;index=bibliotecaliderazgo>
Similar Messages
-
Issue while TREX upgrade from 7.0 to 7.10 in Redhat 5
Hi
We are upgrading the TREX from 7.0 to 7.10 in Redhat 5
We follow the approach mention in TREX upgrade guide for Scenario Upgrade by Update
When we run the tool the insatllation run and finishes ( Having 2 steps only )
It already select the existing TREX system
1. Set up TREX instance
2. TREX execution phase
after that when we are checking TREX is still of old version.
Moreover we find our in /usr/sap/<SID> there is only more directory created with name <SID> having global profile and exe folder inside it but no instance folder
Please guide how to move ahead.
ThanksHi Pavan,
could you please tell me how we can make the syatem read access only before doing the upgrade TREX 7.0 to 7.10
Regards
JK -
Upgrade from PI 7.0 SP18 to PI 7.1 EHP1
Hi all,
I'm performing an Upgrade from Netweaver PI 7.0 SP18 to PI 7.1 EHP1.
I've checked all the notes ragarding any known issuses about the process BUT....
Here's the problem: in Phase TR_CMDIMPORT_PREPARE ( during the Support Package Import ) the upgrade stops with this error:
ERROR: 339 errors detected during TR_CMDIMPORT_PREPARE.
Errors are accumulated in file PCMDIMP.ELG.
PCMDIMP.ELG shows problems related to R3trans version, but, as you can see, my version is newer:
"2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19."
What could possibly be wrong?
Notice that in my download directory I've put:
the latest Upgrade Correction ( NW711_19-10007578.SAR ).
the latest Kernel ( 711 46 )
the latest EHP1 Support Package ( 03 )
the latest SAPup: 7.10/5 29.003 ( as suggested by note 1156185. I know it's 7.10, not 7.11 but the note it's clear on that. Anyway i tried, unsuccessfully, without the SUPup, so.... )
I use the following media:
NW PI 7.1 EHP1 Upgrade Master 51036470
NW 7.11 IM/Kernel/TREX WIN x64, IA64 51036476
NW AS ABAP 7.1 EHP1 Language 51036707
I even tried to use the original Kernel from the DVD...
Any suggestion?
Thanks and Regards,
Andrea
P.S. Partial PCMDIMP.ELG file :
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71101INPIBASIS.JIM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71102INPIBASIS.JIM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "4"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CMDFILE IMPORT ERRORS and RETURN CODE in SAPL-71103INPIBASIS.JIM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
2EETW000 import of new package definition (note 1089083 needs at least R3trans version 6.18, this is 6.19.
1 ETP111 exit code : "8"
Edited by: Andrea Campo on Sep 23, 2009 2:37 PM
Edited by: Andrea Campo on Sep 23, 2009 2:38 PMThis is part of SAPL-71103INPIBASIS.JIM:-------
4 EPU201XBEGIN OF SECTION BEING ANALYZED
1 ETP199X######################################
1 ETP179 CREATE COFILE FROM DATAFILE
1 ETP101 transport order : "SAPK-71103INPIBASIS"
1 ETP102 system : "JIM"
1 ETP108 tp path : "E:\usr\sap\JIM\upg\abap\exe\tp.EXE"
1 ETP109 version and release : "375.32.47" "711"
1 ETP198
4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 23.09.2009 - 12:47:46
4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 > #pid 4904 on srvsvi-w037v (APServiceJIM)
4 ETW000 > createcofile
4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
4 ETW000 >
4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -w
E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time : 23.09.2009 - 12:47:46
4 ETW000 function : CREATECOFILE
4 ETW000 data file : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
4 ETW000 buffersync : NO
4 ETW000 clients : default
4 ETW000 commit : -1
4 ETW000 table cache : dynamic
4 ETW000
4 ETW000 Character set on this machine : 2 byte unicode little endian.
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm
3 ETW709 "711 "
4 ETW000 with R3trans version: 22.01.09 - 11:27:00
4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
--- SYSTEM = 'K7D'.
4 ETW000
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
4 ETW000 lsm during export: ALL
4 ETW000 datafile was created with 'langdeletions=no'.
4 ETW000 trfunction = D (patch transport)
3 ETW692 "SAPK-71103INPIBASIS "
3 ETW708 "000"
3 ETW695 "D"
3 ETW694 "SAP "
3 ETW693 "SAP "
3 ETW696 "20090609"
3 ETW713 "PI_BASIS Support Package 03 for 7.11 "
3 ETW691 "CORRMERGMERGEINFO PI_BASIS K7D 20090609 133924
3 ETW707 "CORRMERGMERGEINFO PI_BASIS K7D 20090609 133924
3 ETW691 "LIMUCLSD/SCMB/CA_DF_ATTR_QTY
3 ETW707 "R3TRCLAS/SCMB/CA_DF_ATTR_QTY"
4 ETW000 809204 bytes read.
4 ETW000 Transport overhead 17.1 %.
4 ETW000 Data compressed to 7.0 %.
4 ETW000 Duration: 0 sec (809204 bytes/sec).
3 ETW710 "0" "0"
4 ETW000 End of Transport (0000).
4 ETW000 date&time: 23.09.2009 - 12:47:46
1 ETP179 CREATE COFILE FROM DATAFILE
1 ETP110 end date and time : "20090923124746"
1 ETP111 exit code : "0"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP101 transport order : "SAPK-71103INPIBASIS"
1 ETP102 system : "JIM"
1 ETP108 tp path : "E:\usr\sap\JIM\upg\abap\exe\tp.exe"
1 ETP109 version and release : "375.32.47" "711"
1 ETP198
4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 23.09.2009 - 12:49:20
4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 > #pid 7740 on srvsvi-w037v (jimadm)
4 ETW000 > import
4 ETW000 > buffersync=no
4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
4 ETW000 > continuation='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP'
4 ETW000 > client cascade yes
4 ETW000 > repeatimport=yes
4 ETW000 > importtruncated = yes
4 ETW000 > including 'NOTHING'
4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -u
26 -w E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 active unconditional modes: 26
4 ETW000 Connected to DBMS = MSSQL --- SERVER = 'SRVSVI-W037V' DBNAME = 'JIM' ---
SYSTEM = 'JIM'.
4 ETW690 COMMIT "0" "0"
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time : 23.09.2009 - 12:49:20
4 ETW000 function : IMPORT
4 ETW000 data file : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
4 ETW000 Continuation : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP
4 ETW000 buffersync : NO
4 ETW000 clients : cascade
4 ETW000 repeatimport : YES (corresponds to unconditional mode 1)
4 ETW000 repeatclimport : NO
4 ETW000 c.s.i. : NO
4 ETW000 importtruncated : YES (imported data may be destroyed!)
4 ETW000 charsetadapt : YES
4 ETW000 def. charset : WEUROPEAN
4 ETW000 commit : 100000
4 ETW000 table cache : dynamic
4 ETW000 INCLUDING : 'NOTHING'
4 ETW000
4 ETW000 rejected clients : 066
4 ETW000
4 ETW000 client cascade to: 000, 001
4 ETW000 Character set on this machine : 2 byte unicode little endian.
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm
3 ETW709 "711 "
4 ETW000 with R3trans version: 22.01.09 - 11:27:00
4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
--- SYSTEM = 'K7D'.
4 ETW000
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
4 ETW000 lsm during export: ALL
4 ETW000 datafile was created with 'langdeletions=no'.
4 ETW000 trfunction = D (patch transport)
4 ETW000 switching to selective language import
4 ETW000 the following languages will be imported: DEI
4 ETW000 Used Commandfile SAPK-71103INPIBASIS (SAPUSER/140)
4 ETW000 This is a patch transport.
4 ETW000 1 entry for E070 updated (SAPK-71103INPIBASIS).
4 ETW000 140 entries for E071 inserted (SAPK-71103INPIBASIS *).
4 ETW000 1 entry for E071K inserted (SAPK-71103INPIBASIS *).
4 ETW000 1 entry for E071KF inserted (SAPK-71103INPIBASIS *).
4 ETW000 1 entry for E070C inserted (SAPK-71103INPIBASIS).
4 ETW000 1 entry for E07T updated (SAPK-71103INPIBASIS *).
4 ETW690 COMMIT "103098" "103098"
3WETW000 different nametabs for table ENHOBJ (field ENHOBJTYPE).
3WETW000 key field truncated
3WETW000 Key field is not in NTAB.
4 ETW000 table ENHOBJ: entry in DB is 2 bytes smaller than in file.
4 ETW000 ... ignoring such differences.
3WETW000 different nametabs for table TRDIR (field TROBJECT_TYPE).
4 ETW000 Field is not in NTAB.
3WETW000 different nametabs for table TRDIR (field TROBJECT_NAME).
3WETW000 different nametabs for table SPROXREG (field IFR_IDEMPOTENT).
[u2026]
4 ETW000 Field is not in NTAB.
4 ETW000 table SPROXREG: entry in DB is 2 bytes smaller than in file.
4 ETW000 ... ignoring such differences.
3 ETW677 "R3TRCLAS/SCMB/CL_DF_ARCH_ADD_TABLE" not imported in this step.
2EETW000 import of new package definition (note 1089083 needs at least R3trans
version 6.18, this is 6.19.
[u2026]
4 ETW000 no entries for PAK_RUNTIME_ENV will be imported in this step.
3 ETW677 "R3TRDEVC/SCMB/FLOW" not imported in this step.
2EETW000 import of new package definition (note 1089083 needs at least R3trans
version 6.18, this is 6.19.
3 ETW677 "R3TRDEVC/SCMB/FLOW_NET" not imported in this step.
3 ETW677 "R3TRDSYSSIMGASC0TSAI" not imported in this step.
3WETW000 different nametabs for table ENHLOG (field ENHTOOLTYPE).
4 ETW000 Field is not in NTAB.
4 ETW000 table ENHLOG: entry in DB is 20 bytes smaller than in file.
4 ETW000 ... ignoring such differences.
3 ETW677 "R3TRENHO/SCMB/ARC_DOCFLOW_ADD_TABLE" not imported in this step.
3 ETW677 "R3TRFUGR/SCMB/DF_ARCHIVE" not imported in this step.
3 ETW677 "R3TRFUGRRSC2" not imported in this step.
2EETW000 import of new package definition (note 1089083 needs at least R3trans
version 6.18, this is 6.19.
4 ETW109 table "PAK_INTF_CONTENT" does not exist in nametab.
4 ETW000 no entries for PAK_INTF_CONTENT will be imported in this step.
3 ETW677 "R3TRPINF/SCMB/FLOW_API_DOCUMENT" not imported in this step.
2EETW000 import of new package definition (note 1089083 needs at least R3trans
version 6.18, this is 6.19.
3 ETW677 "R3TRPINF/SCMB/FLOW_API_NET" not imported in this step.
4 ETW000 SAPK-71103INPIBASIS touched.
4 ETW690 COMMIT "128" "103226"
4 ETW000 809204 bytes read.
4 ETW000 Transport overhead 17.1 %.
4 ETW000 Data compressed to 7.0 %.
4 ETW000 Duration: 0 sec (809204 bytes/sec).
3 ETW710 "0" "0"
4 ETW000
4 ETW000 Summary:
4 ETW000
4 ETW000 1 COMML imported.
4 ETW000 1 COMMT imported.
4 ETW000 Totally 2 Objects imported.
4 ETW000
4 ETW000 103226 bytes modified in database.
4 ETW000 [dev trc ,00000] Disconnecting from ALL connections:
264239 0.264239
4 ETW000 [dev trc ,00000] Disconnected from connection 0
4041 0.268280
4 ETW000 [dev trc ,00000] statistics db_con_commit (com_total=3, com_tx=3)
4 ETW000
31 0.268311
4 ETW000 [dev trc ,00000] statistics db_con_rollback (roll_total=0,
roll_tx=0)
4 ETW000
23 0.268334
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0008).
4 ETW000 date&time: 23.09.2009 - 12:49:20
4 ETW000 34 warnings occured.
4 ETW000 4 errors occured.
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP110 end date and time : "20090923124920"
1 ETP111 exit code : "8"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP101 transport order : "SAPK-71103INPIBASIS"
1 ETP102 system : "JIM"
1 ETP108 tp path : "E:\usr\sap\JIM\upg\abap\exe\tp.exe"
1 ETP109 version and release : "375.32.47" "711"
1 ETP198
4 ETW000 E:\usr\sap\JIM\upg\abap\exe\R3trans.exe version 6.19 (release 711 -
22.01.09 - 11:27:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 23.09.2009 - 13:57:11
4 ETW000 control file: E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 > #pid 5540 on srvsvi-w037v (jimadm)
4 ETW000 > import
4 ETW000 > buffersync=no
4 ETW000 > file='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP'
4 ETW000 > continuation='E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP'
4 ETW000 > client cascade yes
4 ETW000 > repeatimport=yes
4 ETW000 > importtruncated = yes
4 ETW000 > including 'NOTHING'
4 ETW000 R3trans was called as follows: E:\usr\sap\JIM\upg\abap\exe\R3trans.exe -u
26 -w E:\usr\sap\JIM\upg\abap\tmp\SAPL-71103INPIBASIS.JIM
E:\usr\sap\JIM\upg\abap\tmp\SAPKK-71103INPIBASIS.JIM
4 ETW000 active unconditional modes: 26
4 ETW000 Connected to DBMS = MSSQL --- SERVER = 'SRVSVI-W037V' DBNAME = 'JIM' ---
SYSTEM = 'JIM'.
4 ETW690 COMMIT "0" "0"
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time : 23.09.2009 - 13:57:11
4 ETW000 function : IMPORT
4 ETW000 data file : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS.SAP
4 ETW000 Continuation : E:\usr\sap\JIM\upg\abap\data\R-71103INPIBASIS_#.SAP
4 ETW000 buffersync : NO
4 ETW000 clients : cascade
4 ETW000 repeatimport : YES (corresponds to unconditional mode 1)
4 ETW000 repeatclimport : NO
4 ETW000 c.s.i. : NO
4 ETW000 importtruncated : YES (imported data may be destroyed!)
4 ETW000 charsetadapt : YES
4 ETW000 def. charset : WEUROPEAN
4 ETW000 commit : 100000
4 ETW000 table cache : dynamic
4 ETW000 INCLUDING : 'NOTHING'
4 ETW000
4 ETW000 rejected clients : 066
4 ETW000
4 ETW000 client cascade to: 000, 001
4 ETW000 Character set on this machine : 2 byte unicode little endian.
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 01.07.2009 at 14:30:19 by k7dadm
3 ETW709 "711 "
4 ETW000 with R3trans version: 22.01.09 - 11:27:00
4 ETW000 Source System = Solaris on SPARCV9 CPU on DBMS = DB6 --- DB2DBDFT = 'K7D'
--- SYSTEM = 'K7D'.
4 ETW000
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd
4 ETW000 language vector during export: 1234568ABCDEFGHIJKLMNOPQRSTUVWcd (ISO-
ZHTHKOROSLHRUKARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGCASH)
4 ETW000 lsm during export: ALL
4 ETW000 datafile was created with 'langdeletions=no'.
4 ETW000 trfunction = D (patch transport)
[u2026]
roll_tx=0)
4 ETW000
23 0.228932
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0008).
4 ETW000 date&time: 23.09.2009 - 13:57:11
4 ETW000 34 warnings occured.
4 ETW000 4 errors occured.
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP110 end date and time : "20090923135712"
1 ETP111 exit code : "8"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED -
Portal Upgrade from EP6.0sp10 to EP6.0sp18
Hi All,
I am totally new to portal upgrade.we have current version of portal as follows:
portal version is: 6.0.10.2.0
KMC version is : 6.0.10.1.0 (NW04 SPS10 Patch 1)
Trex Version : 6.1.10.01
1. I am little confuse about whats the difference between Upgrading from EP6.0sp10 to "<b>EP6.0sp18/ NW04sp18</b>".Is the process for doing above is same or different.
2. I heard from SAP that TREX must be upgraded first before KMC and Portal.Is it true? whats is reason for that
?what should be latest SP and patch for TREX?any documents?
3. Is there any specific sequence to upgrade like TREX->WAS>portal>KMC?
4. What about customisations objects,will that be seriously affected after upgrade?How to prevent that?
can anybody give the Basic knowledge of upgrade and process flow.
Thanks in Advance.Help will be greatly appreciated.
AmitHi Amit,
EP6 SP18 ist the actual Service Pack for Enterprise Portal. NW04 SPS(!) 18 is the complete Service Pack Stack for the NetWeaver platform. So if you want SP18 for your portal installation, you should get the whole NetWeaver platform in use for that to SPS18 (as you wrote, for EP this is normally WAS, EP, KM, TREX, eventually NWDS).
TREX normally has the same counting as the rest, but in fact at the moment there is no SP18 for TREX, but it is renumbered again. The actual version reads TREX 6.1 Patch 26.
Sequence is WAS -> portal -> KMC -> TREX. Anyhow, you should not await a stable version if using mixed SPs, especially if mixing 10 with 18 So get all in line and then restart working with your installation.
As you normally shouldn't have customized standard objects but copied them into your own namespace and worked on these, there shouldn't be a problem. If you haven't gone this way, with such an update you will learn how urgent it is to keep this in mind --- never change standard objects...
Hope it helps
Detlev -
Reasons to upgrade from CRM 4.0 to CRM 7.0 ?
Hi Experts,
We have CRM 4.0 working on our client system. Why should they upgrade from CRM 4.0 to CRM 7.0 ?
A few reasons that I can think of are :
1) SAP will not support CRM 4.0 -
But they can get maintenance support from SAP although at a higher cost
2) CRM WebClient - fast and easy to configure and maintain -
but this is not so convincing a reason that they should upgrade and then almost implement whole of CRM again. They already have Portal.
3) Some new functionality added by SAP in the newer versions-----That is good but their business is working good with the existing functionality of CRM 4.0
Please provide some compelling reasons so that we can ask our client to go for upgrade.
Thanks in advance.
Regards,
VikasHi Vikas,
Although your customer happy with the functions in CRM 4.0, and they are willing to pay extra money for extended maintenance fee. SAP will end the support of CRM 4.0 sooner for later.
Other reasons I could mention:
1. if there is Java stack then the support of jave stack and the jdk version 1.3.1 is ended.
2. CRM architecture was changed since CRM 6.0 and and 7.0 provided New tools and assistants simplify, standardize, and reduce development effort significantly, i.e. less code development, more flexible customizing. From this prospective, 7.0 is the investment safe release for long-term
3. Enhancement of existing functions, details can be found in CRM 7.0 Release notes
4. If you use compoenent like TREX, definately you will be benefit from newer version, stable, faster etc.
There should be a lot, and you can order upgrade value proposition service from SAP for formal evaluation.
Cheers,
Denny -
I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
-
Is it really possible to upgrade from a Treo 650 to a Treo 750?
I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T) -
I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?
Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314 -
I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H. -
Can't print from IE 8 after upgrading from Vista to Windows 7
My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff -
Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0
Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
ShubhadaSAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH -
Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0
Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
SteffanPublic Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
strFileName = EplanSet!path & EplanSet!File
If AcroAVDoc.Open(strFileName, vbNull) <> True Then
Exit Function
End If
Set AcroAVDoc = AcroApp.GetActiveDoc
Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions! -
Upgrade from R/3 4.6C to ECC 6.00 : languages
Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French for component EA-APPL
- French for component EA-DFPS
- French for component EA-FINSERV
- French for component EA-GLTRADE
- French for component EA-HR
- French for component EA-IPPE
- French for component EA-PS
- French for component EA-RETAIL
- French for component ECC-DIMP
- French for component ERECRUIT
- French for component FI-CA
- French for component FI-CAX
- French for component FINBASIS
- French for component INSURANCE
- French for component IS-CWM
- French for component IS-H
- French for component IS-M
- French for component IS-OIL
- French for component IS-PS-CA
- French for component IS-UT
- French for component LSOFE
- French for component PI_BASIS
- French for component SAP_ABA
- French for component SAP_AP
- French for component SAP_APPL
- French for component SAP_BASIS
- French for component SAP_BW
- French for component SAP_HR
- French for component SEM-BW
- French for component ST-PI
- Dutch for component EA-APPL
- Dutch for component EA-DFPS
- Dutch for component EA-FINSERV
- Dutch for component EA-GLTRADE
- Dutch for component EA-HR
- Dutch for component EA-IPPE
- Dutch for component EA-PS
- Dutch for component EA-RETAIL
- Dutch for component ECC-DIMP
- Dutch for component ERECRUIT
- Dutch for component FI-CA
- Dutch for component FI-CAX
- Dutch for component FINBASIS
- Dutch for component INSURANCE
- Dutch for component IS-CWM
- Dutch for component IS-H
- Dutch for component IS-M
- Dutch for component IS-OIL
- Dutch for component IS-PS-CA
- Dutch for component IS-UT
- Dutch for component LSOFE
- Dutch for component PI_BASIS
- Dutch for component SAP_ABA
- Dutch for component SAP_AP
- Dutch for component SAP_APPL
- Dutch for component SAP_BASIS
- Dutch for component SAP_BW
- Dutch for component SAP_HR
- Dutch for component SEM-BW
- Dutch for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancelHi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel -
I've recently completed a database upgrade from 10.2.0.3 to 11.2.0.1 using the DBUA.
I've since encountered a slowdown when running a script which drops and recreates a series of ~250 tables. The script normally runs in around 19 seconds. After the upgrade, the script requires ~2 minutes to run.
By chance has anyone encountered something similar?
The problem may be related to the behavior of an "after CREATE on schema" trigger which grants select privileges to a role through the use of a dbms_job call; between 10g and the database that was upgraded from 10G to 11g. Currently researching this angle.
I will be using the following table creation DDL for this abbreviated test case:
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA;When calling the above DDL, an "after CREATE on schema" trigger is fired which schedules a job to immediately run to grant select privilege to a role for the table which was just created:
create or replace
trigger select_grant
after CREATE on schema
declare
l_str varchar2(255);
l_job number;
begin
if ( ora_dict_obj_type = 'TABLE' ) then
l_str := 'execute immediate "grant select on ' ||
ora_dict_obj_name ||
' to select_role";';
dbms_job.submit( l_job, replace(l_str,'"','''') );
end if;
end;
{code}
Below I've included data on two separate test runs. The first is on the upgraded database and includes optimizer parameters and an abbreviated TKPROF. I've also, included the offending sys generate SQL which is not issued when the same test is run on a 10g environment that has been set up with a similar test case. The 10g test run's TKPROF is also included below.
The version of the database is 11.2.0.1.
These are the parameters relevant to the optimizer for the test run on the upgraded 11g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_capture_sql_plan_baselines boolean FALSE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 11.2.0.1
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
optimizer_use_invisible_indexes boolean FALSE
optimizer_use_pending_statistics boolean FALSE
optimizer_use_sql_plan_baselines boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 03-11-2010 16:33
SYSSTATS_INFO DSTOP 03-11-2010 17:03
SYSSTATS_INFO FLAGS 0
SYSSTATS_MAIN CPUSPEEDNW 713.978495
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM 1565.746
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED 2310
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Output from TKPROF on the 11g SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 324
{code}
... large section omitted ...
Here is the performance hit portion of the TKPROF on the 11g SID:
{code}
SQL ID: fsbqktj5vw6n9
Plan Hash: 1443566277
select next_run_date, obj#, run_job, sch_job
from
(select decode(bitand(a.flags, 16384), 0, a.next_run_date,
a.last_enabled_time) next_run_date, a.obj# obj#,
decode(bitand(a.flags, 16384), 0, 0, 1) run_job, a.sch_job sch_job from
(select p.obj# obj#, p.flags flags, p.next_run_date next_run_date,
p.job_status job_status, p.class_oid class_oid, p.last_enabled_time
last_enabled_time, p.instance_id instance_id, 1 sch_job from
sys.scheduler$_job p where bitand(p.job_status, 3) = 1 and
((bitand(p.flags, 134217728 + 268435456) = 0) or
(bitand(p.job_status, 1024) <> 0)) and bitand(p.flags, 4096) = 0 and
p.instance_id is NULL and (p.class_oid is null or (p.class_oid is
not null and p.class_oid in (select b.obj# from sys.scheduler$_class b
where b.affinity is null))) UNION ALL select
q.obj#, q.flags, q.next_run_date, q.job_status, q.class_oid,
q.last_enabled_time, q.instance_id, 1 from sys.scheduler$_lightweight_job
q where bitand(q.job_status, 3) = 1 and ((bitand(q.flags, 134217728 +
268435456) = 0) or (bitand(q.job_status, 1024) <> 0)) and
bitand(q.flags, 4096) = 0 and q.instance_id is NULL and (q.class_oid
is null or (q.class_oid is not null and q.class_oid in (select
c.obj# from sys.scheduler$_class c where
c.affinity is null))) UNION ALL select j.job, 0,
from_tz(cast(j.next_date as timestamp), to_char(systimestamp,'TZH:TZM')
), 1, NULL, from_tz(cast(j.next_date as timestamp),
to_char(systimestamp,'TZH:TZM')), NULL, 0 from sys.job$ j where
(j.field1 is null or j.field1 = 0) and j.this_date is null) a order by
1) where rownum = 1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.47 0.47 0 9384 0 1
total 3 0.48 0.48 0 9384 0 1
Misses in library cache during parse: 1
Optimizer mode: CHOOSE
Parsing user id: SYS (recursive depth: 1)
Rows Row Source Operation
1 COUNT STOPKEY (cr=9384 pr=0 pw=0 time=0 us)
1 VIEW (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=6615380 card=194570)
1 SORT ORDER BY STOPKEY (cr=9384 pr=0 pw=0 time=0 us cost=5344 size=11479630 card=194570)
194790 VIEW (cr=9384 pr=0 pw=0 time=537269 us cost=2563 size=11479630 card=194570)
194790 UNION-ALL (cr=9384 pr=0 pw=0 time=439235 us)
231 FILTER (cr=68 pr=0 pw=0 time=920 us)
231 TABLE ACCESS FULL SCHEDULER$_JOB (cr=66 pr=0 pw=0 time=690 us cost=19 size=13157 card=223)
1 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=2 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
1 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
0 FILTER (cr=3 pr=0 pw=0 time=0 us)
0 TABLE ACCESS FULL SCHEDULER$_LIGHTWEIGHT_JOB (cr=3 pr=0 pw=0 time=0 us cost=2 size=95 card=1)
0 TABLE ACCESS BY INDEX ROWID SCHEDULER$_CLASS (cr=0 pr=0 pw=0 time=0 us cost=1 size=40 card=1)
0 INDEX UNIQUE SCAN SCHEDULER$_CLASS_PK (cr=0 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 5056)
194559 TABLE ACCESS FULL JOB$ (cr=9313 pr=0 pw=0 time=167294 us cost=2542 size=2529254 card=194558)
{code}
and the totals at the end of the TKPROF on the 11g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 2 0.00 0.00 0 0 4 0
Fetch 0 0.00 0.00 0 0 0 0
total 3 0.00 0.00 0 0 4 0
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 70 0.00 0.00 0 0 0 0
Execute 85 0.01 0.01 0 62 208 37
Fetch 49 0.48 0.49 0 9490 0 35
total 204 0.51 0.51 0 9552 208 72
Misses in library cache during parse: 5
Misses in library cache during execute: 3
35 user SQL statements in session.
53 internal SQL statements in session.
88 SQL statements in session.
Trace file: 11gSID_ora_17721.trc
Trace file compatibility: 11.1.0.7
Sort options: default
1 session in tracefile.
35 user SQL statements in trace file.
53 internal SQL statements in trace file.
88 SQL statements in trace file.
51 unique SQL statements in trace file.
1590 lines in trace file.
18 elapsed seconds in trace file.
{code}
The version of the database is 10.2.0.3.0.
These are the parameters relevant to the optimizer for the test run on the 10g SID:
{code}
SQL> show parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.3
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
SQL> show parameter db_file_multi
NAME TYPE VALUE
db_file_multiblock_read_count integer 8
SQL> show parameter db_block_size
NAME TYPE VALUE
db_block_size integer 8192
SQL> show parameter cursor_sharing
NAME TYPE VALUE
cursor_sharing string EXACT
SQL> column sname format a20
SQL> column pname format a20
SQL> column pval2 format a20
SQL> select sname, pname, pval1, pval2 from sys.aux_stats$;
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS COMPLETED
SYSSTATS_INFO DSTART 09-24-2007 11:09
SYSSTATS_INFO DSTOP 09-24-2007 11:09
SYSSTATS_INFO FLAGS 1
SYSSTATS_MAIN CPUSPEEDNW 2110.16949
SYSSTATS_MAIN IOSEEKTIM 10
SYSSTATS_MAIN IOTFRSPEED 4096
SYSSTATS_MAIN SREADTIM
SYSSTATS_MAIN MREADTIM
SYSSTATS_MAIN CPUSPEED
SYSSTATS_MAIN MBRC
SYSSTATS_MAIN MAXTHR
SYSSTATS_MAIN SLAVETHR
13 rows selected.
{code}
Now for the TKPROF of a mirrored test environment running on a 10G SID:
{code}
create table ALLIANCE (
ALLIANCEID NUMBER(10) not null,
NAME VARCHAR2(40) not null,
CREATION_DATE DATE,
constraint PK_ALLIANCE primary key (ALLIANCEID)
using index
tablespace LIVE_INDEX
tablespace LIVE_DATA
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.01 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.01 0.01 0 2 16 0
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 113
{code}
... large section omitted ...
Totals for the TKPROF on the 10g SID:
{code}
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.02 0 0 0 0
Execute 1 0.00 0.00 0 2 16 0
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.00 0.02 0 2 16 0
Misses in library cache during parse: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 65 0.01 0.01 0 1 32 0
Execute 84 0.04 0.09 20 90 272 35
Fetch 88 0.00 0.10 30 281 0 64
total 237 0.07 0.21 50 372 304 99
Misses in library cache during parse: 38
Misses in library cache during execute: 32
10 user SQL statements in session.
76 internal SQL statements in session.
86 SQL statements in session.
Trace file: 10gSID_ora_32003.trc
Trace file compatibility: 10.01.00
Sort options: default
1 session in tracefile.
10 user SQL statements in trace file.
76 internal SQL statements in trace file.
86 SQL statements in trace file.
43 unique SQL statements in trace file.
949 lines in trace file.
0 elapsed seconds in trace file.
{code}
Edited by: user8598842 on Mar 11, 2010 5:08 PMSo while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table." -
Hi Microsoft,
Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
Your help is greatly appreciated!Totally correct!
If you don't plan to maintain Outlook then you plan to fail :(
Additional links etc are in here:
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
Maybe you are looking for
-
Hi, We've a new Canon printer through the network and I'm trying to install it following the manual steps (install UFR II ... add printer.... more printers... selected Canon IP (UFR II).... added direction (valid and complete)) but then, when I click
-
Can a masking layer have more than one mask?
I have a mask layer with a rectangular mask in it. Inder this layer I and a nasked layer with an object to be masked on it This works fine When I all another object to be masked in thesame layer and relevant mask in the same masking layer the sacond
-
Audio Output (quality) questions
Hi, I recieve high quality audio from a audio imaging guy which I animate short animated bits to. I seem to get differing qualities when outputting the final animation. I know there are settings for the audio when I bring it into the library and I le
-
Previous price history while releasing new PO
hii Experts is it possible that system show previous price history of any item while releasing new Po of that items. ashwani tripathi
-
Deleting old unsubscribed podcasts
Hey, I have a 60GB 5G Video Ipod and subscribe to many podcasts. I have stopped subscribing to some but for some reason the name of the podcast still appears on my ipod. There are the names of Podcasts that I have deleted along time ago but still are