Upgrade from very old itune version to new

Wanted to put in new songs and says i need new version. questions:
1. How do i make sure i don't lose everything (did this once in the past which is why i haven't upgraded in 24 months.
2. Do i have a choice in versions or do i automatically need to go to 7.5.
thanks-

But do I then have to keep the XSKey in my laptop when running Logic 9 or is it just for the install?
i.e. can I then reinsert the XSKey in my old Pro Tools computer and run Logic 6.4.3 after I've installed Logic 9.x on my laptop?
You shouldn't have to use your XS Key to run 9, only to install it. You should be able to do what you want to do.

Similar Messages

  • If I upgrade from my old iPhone to a newer one, what info will I lose?

    This is a different situation than usual.  My daughter needs to upgrade from her iPhone 4 to an iPhone 5s.  She is afraid she will lose the text messages and voice mails from her boyfriend, who died in June.  Her 4 is essentially falling apart, so it's time to switch.  Is there a way she can save the text messages and voice mails from her old phone to her new one?  She's never used iCloud, since she syncs her phone on her MacBook Pro via iTunes. ot a
    I am not a techie, so please use plain English.
    Thanks. 

    In her situation you can also get programs that will extract content from an iPhone backup in iTunes. This would be a good way to archive the texts. And you can also copy them from the phone itself using 3rd party software such as TouchCopy.
    I am sorry for her loss; it is especially tragic when young.

  • I have just upgraded from the old G5 to a new one, however I can't log and capture on the newest FCPs off my Sony Z1.. please help, deadline coming soon

    I have recently just upgraded from my old white powerpc G5 which did not allow me to edit in HD and I had to down convert all my footage to edit in DV. I have  bought the newest FCP studio, and I had to order a new firewire as my new desktop does not take the old one that I had before. The new firewire that I have which is the only one that fits into my iMac from my sony Z1 is a Firewire IEEE1394-B (800) 9 pin to 4 pin .
    My Mac : Processor- 2.8 GHz Intel Core i5
                   Memory- 4GB 1333 MHz DDR3
    All my settings are set to HD and the ilink convert is off, and VCR is set to auto. Why is it not reading my Z1???
    Please someone help me, i have been using FCP for years now and have not come across this problem before...

    camera not recognised in system profiler just says maximum speed up to 800mb/sec
    still says "unable to locate the following external devices:
                   HDV (1440x1080) 50i" in FCP when i try easy setup
    Try a different cable first ... it might be a connection problem
    VCR HDV/DV- Auto
    Component- 1080i/576i
    i.link convert- off
    down convert letter box
    A/V-DV OUT- off
    Bit of guesswork here - haven't used a Sony in a while - but try these:
    • HDV/DV to HDV
    • downconvert off/none?
    mish

  • How can I get my songs from my old itunes to my new one?

    I've recently changed computers. I installed iTunes on my new laptop and I plugged my iPod into it, the songs I bought from iTunes were transferred but the others originally from CDs were not transferred. I don't know how to fix this and I have over a thousand songs so don't really want to install the all manually again.
    Thank you,
    Cherry.

    This may help:
    Managing content manually on iPod
    http://docs.info.apple.com/article.html?artnum=61148
    How to use multiple iPods with one computer
    http://docs.info.apple.com/article.html?artnum=300432

  • Upgrade from (Very) Old Version Premier?

    I suspect this is a stretch -- I have some old video on an old computer with Premier Elements 2.
    It works, but its really slow.
    Is there a way to upgrade these old files so Premier Elements 12 will read them?
    I tried, but it tells me the files (.prel) are not compatible with the latest version.
    Thanks,
    Tim

    Tim
    We are not talking Fraps and the like where the program installs the proprietary codecs necessary for its workings.
    In the Premiere Elements world, you get into problems when you leave your project in the project file format (project.prel). Likewise, most video editing software has a project file format. If you save an unfinished project in Movie Maker, you get a .wlmp file. Most of the project file formats are for sole use within its particular software. Compatibility between the project files has its problems even in "all in the family" software.
    But the formats for the import video and the export video should not typically be running into these issues. Consider...
    Premiere Elements does change its supported import/export file...ex add to... AVCHD was not announced as supported until Premiere Elements 7. And...subtract from...the .tga file extension that was supported in version 8.0/8.0.1 is no longer supported in version 12.
    Curious thing just happened. While I had Premiere Elements 2 opened I decided to refresh my memory on its assets. Its a strictly SD low resolution type version? But is it? I was experimenting with a QuickTime export and decided to change the export settings under the Advanced Button. I typed in 1920 for frame width and 1080 for frame height. The export was a nice looking 1920 x 1080 @ 29.97 progressive frames per second with a AVCHD video codec. Now how did that happen? If you get a chance, please give that a try and see what you get.
    By the way, what type of files did you import into Premiere Elements 2 and what were your favorite export types then?
    More later.
    Thanks for the follow ups.
    ATR
    Add On..I figured out how I got MediaInfo to readout out avc1 (AVCHD) for my Premiere Elements 2 QuickTime 1920 x 1080 export...under the QuickTime  Advanced, I used the H.264 video codec.

  • How do i transfer data from a old itunes to a new one

    My brother and I are tired of my little sister using our apple account. When we gave her my old iPod touch i told her to tell me if she was going to purchase something but she hasn't listened to me. My brother just got a iPhone and picked up a $15 iTunes card so we had 15.03 as of last night, as of now we have 11.83 and my brother and I haven't touched iTunes or the app store. I was going to change the password but apple added a thing so you have to have alteast 1 capital letter and one # and our current password has none of those. she has her own computer in her room so we are just going to do that. is there a way that I can just plug her iPod in the computer and it will download everything on her iPod(music, apps, etc.) and it can be by apple or other software. Any help would be appreciated. She has a iPod touch 3g 8gb upgraded max to 4.2.1 if that is needed

    does anyone have any help for my brother an i

  • I've had Itunes since the original ipod came out, I have upgraded to the new version, and upgraded my Ipod to and Ipod Touch, but I can't get the music I already purchased from the old Itunes to play/sync in my new itunes or ipod. How do I fix this?

    I have the new version of Itunes and have upgraded from 1st gen. Ipod to 4th gen. Ipod touch, I am unable to sync all my music from my old Itunes to my new Ipod, also when I try to play the music on the computer through Itunes it says it needs to be authorized but keeps using my Old email account (which I don't have anymore) for me to authorize, is there a way to fix/ change this so I don't have to buy that music over again?

    What exactly happens when you try to sync?
    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
      Managing content manually on iPhone, iPad, and iPod
    Backup the iPod to iTunes and then restore from that backup
    ]iOS: Back up and restore your iOS device with iCloud or iTunes

  • How do I sync my old itunes with a new ipod?

    I have just got the latest iPod Nano, after having an extremely old version (from about 5 years ago). All my music (over 800 songs) is on my iTunes account on my home computer, but this computer only has Windows XP, which is not compatible with the new iPods. If I get iTunes 10.4 on my laptop, how can I transfer all my songs from my old iTunes to my new iTunes so that I can sync with my new iPod??
    Thankyou

    Hi,
    See Here
    http://support.apple.com/kb/HT4527
    And Here
    http://www.apple.com/support/switch101/
    And Here
    http://www.apple.com/support/ipodnano/
    Cheers, 

  • I currently have an old version of Photoshop Elements, it is version 5.0.  I recently upgraded from my old Windows XP computer to a new Windows 7 computer.  My question is:  Can I install this version 5.0 on my new windows 7 computer without any problems?

    I currently have an old version of Photoshop Elements, it is version 5.0.  I recently upgraded from my old Windows XP computer to a new Windows 7 computer.  My question is:  Can I install this version 5.0 on my new Windows 7 computer without any problems?  my email is:  [email protected]  Thank you!

    Do not know about 5, but, just installed PE 6 on I7 64 bit and it works.

  • HT1329 I was able to transfer my music from my old PC to my new one and connect to the newest version of ITunes but my playlists do not appear on my new PC when I open ITunes.  Any suggestions?

    I was able to transfer my music from my old PC to my new one and connect to the newest version of ITunes but my playlists from my old PC do not appear on my new PC when I open ITunes.  Any suggestions?

    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • I'm retiring my old computer (windows xp) to a new computer (windows 7). How can i easily move my itunes music from the old computer to the new computer? i have my playlists organized in my old computer, i would like it to stay that way in my new computer

    i'm retiring my old computer (with windows xp) and bought a new computer (with windows 7). How can i easily move my itunes music from the old computer to the new computer? i have my playlists organized in my old computer, i would like it to stay that way in my new computer. I also have my ipods, iphone sync'd in the old computer so i want to make sure that things won't get messed up (my apps, playlists, etc) when i move over everything to the new computer and sync all my devices with the new computer.
    Thanks in advance for the tips.

    Make sure the XP box is upgraded to the latest version of itunes. Also make sure it's using the itunes media folder layout as explained here, because that's what the W7 is going to be using.
    http://support.apple.com/kb/HT3847
    Install itunes on the new W7 PC.
    Get these folders from the XP machine
    C:\Documents and Settings\username\My Documents\My Music\iTunes
    C:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    And put them here on the W7 machine
    C:\users\username\My Music\iTunes
    C:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • How do i transfer songs from my old ipod to my new one when not all the songs are on my itunes account?

    I got a new ipod touch. my old ipod is a nano.  i have an itunes account, but it is very old and i do not remember my itunes account information. most of the songs from my old ipod are not on my itunes account. how can i get all the songs from my old ipod onto my new one?

    Transfer non-iTunes purcased music from the iPod to the computer by using a hird-party program like one of those discused here:
    Copy music from Ipod to new computer...: Apple Support Communities
    Transfer iTunes purchased by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    You do have to know the accout(s) ID and password.
    The follwing includes how to reset your password.
    Frequently Asked Questions About Apple ID

  • I need to transfer my Whatsapp messages from my old iPhone4 to my new iPhone5. iCloud did not succeed synchronising in iTunes... Any ideas anyone? Thanks

    I've just been upgraded to an iPhone5. When activating the new device everything was going smoothly, even the syncing in iTunes (I had previously edited a playlist to go in the new handset). A few things did not transfer as planned, such is messages and settings from the Whatsapp application, my video library and some other things that I had to recover manually.
    The thing is that I'm finding it more difficult in Whatsapp's case. Although they are sending me codes for me to restore the app to it's formal being, or offering tricks on how to restore my messages from iCloud (which fell to comply in the first instance), I cannot get my messages and settings to display as they were. I found in their help page a link for people who wanted to transfer their massages from the old device to the new one. I went to click in the link that applied to iPhone devices and was redirected to Apple Support site. I hope you can help because I really like my new phone and it would hurt if I had to send it back.
    Thank you again
    Juan Verano

    I like to try that, yeah... Sounds interesting enough. Only... d'you mean doing it over iTunes, right? No way! I won't dare putting all the rubbish that was in my iPhone 4 and had to get rid of before syncing iPhone5. Well, just created a new playlist, really but all that junk may get back in... No.

  • I can't install iTunes 10 on mac os x; therefore, I can't sync new iPod devices with my old iTunes version 9?

    I can't install iTunes 10 on mac os x; therefore, I can't sync new iPod devices with my old iTunes version 9?

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • HT203167 I purchased a new computor, because my old computor crashed and burned. when I resumed iTunes I used a new username and password. How do I retrieve my music libraries from my old iTunes account

    Old computor crashed and burned. purchase new lenovo lap top with windows 7. got new itunes account. with new usename and password. how do I retrieve my old music libraries from my old itunes account.

    Why did you start a new itunes account?  This will just cause problems.
    Your library will only be where you put it.
    It has alwasys been very basic to always maintain a backup copy of your computer for this very occasion.
    If for some reason you have failed to maintain a backup, not good at all, then you can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • Csv output stop working after upgrade

    We just did a apex 3.2 to 4.0 upgrade, then all csv output links stop working. How can I fix the problem? Any suggestions are greatly appreciated. A sample link is shown in following, which give page not found error http://c2apex:7777/pls/apex/f?p=10

  • I wanted to syc my iPhone to my newly bought macbook. How do I do that?

    I got my new macbook recently. Now I wanted to syc my phone to the i tunes on my new macbook. When I try to do that, it warns me of losing all data. Is there any way I could sync my phone to the new macbook.

  • Can Labview DAQ work on a self-trigg​ering basis?

    Currently I have the following setup: We shoot electrons through a diamond (which is attached to a electronics board via electrodes), then the electrons pass through a scintillator.  We use the scintillator/phototube as the trigger pulse right now, b

  • How can I start local J2EE Engine in debug mode automatically?

    Hello, I thought there was a way to setup the local J2EE engine to automatically start in debug mode. Right now, I have to start the engine, go into Studio and right-click on engine and choose "Enable debugging of process". This means that I have to

  • Regular touch pannel such as LG T1710B

    Hi Experts, I have a very easy question for you guys: I was wondering if it is possible to use "commercial oriented" touch screen such as LG T1710B (http://www.lg.com/za/monitors/lg-T1710B-monitor) for Labview SCADA purpose. The VI is Modbus related