Upgrade from WCS Base to Plus Licence

Hi,
I purchased the Cisco WCS Base licence WCS-APBASE-50 however need the Plus licence.
Q1. If I purchase WCS-PLUS-UPG-50 will this give me the plus licence?
Q2. Once I purchase WCS-PLUS-UPG-50, how do I upgrade from my Base licence to Plus? Can you do this on the Cisco website?
Thanks,

Here is a link that helps explain the WCS license. WCS is EOS and NCS has taken that over. Prime Infrastructure replaces NCS:) what you should look at is the WCS to Prime Migration license. You will be able to keep you WCS license and have the plus which is built in with NCS. Plus they throw in a 25 license.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html
Sent from Cisco Technical Support iPhone App

Similar Messages

Can I buy a Lightroom upgrade (from LR3) with a perpetual licence and a student discount? If so, which page do I need? Thanks.

I am trying to buy a Lightroom upgrade (from LR3) with a perpetual licence and with a student discount.
If I go the student discount route on the web U get taken to the 'cloud' options which I don't want.
Any help would be appreciated.
Thanks.
PS Is the upgrade worth it in any case??

I believe there are NO upgrades for Student and Teacher editions but you can see here: Products
If the price is the same as an ordinary upgrade you are probably better off buying that because it can be upgraded in the future.

How do I upgrade from basic membership to plus membership

How do I upgrade from basic membership to plus membership

Welcome to the forum. Photoshop.COM has morphed into Adobe Revel. This FAQ Entry should be able to help you: http://forums.adobe.com/message/5015068#5015068
Good luck,
Hunt

Haven't been able to send/receive iMessages since upgrading from 4s to 6 plus

I bought iphone 6 plus 64G to upgrade from my iPhone 4S. I have not been able to send or receive iMessages to iPhone users in my contacts with my cell number. It always uses my email when I create a new iMessage and is able to send that way. I cannot receive iMessages from iPhones to my cell number. which is a huge problem. I have tried turning iMessages on and off and resetting my network and nothing seems to be working. How can I resolve the problem?

If you turn iMessage off and on, does it activate? If not, then see this troubleshooting support document. If you have difficulty activating FaceTime or iMessage - Apple Support
If it does activate, the go to Send & Receive and see if your phone number is listed there. It should be grayed out and checked.

Error message: Fulfill:2004 This license has already been fulfilled by another user. I need to read on 3 devices. I could until I upgraded from 4S to 6 plus. Can you help

I just upgraded my iPhone 4S to a 6Plus. I also have an iPad2 and an iPad Mini. I read on all 3 devices depending on where I'm going at the time. In my OverDrive settings on my iPad/Mini it says it is authorized by Adobe ID <and my email address>. On the 6Plus settings it says it is authorized by OverDrive account <and my email address>. How do I get the Adobe ID authorized on my 6Plus. Please??? and Thank you.
Ellen

I'm sorry I gave the impression I thought Overdrive was an Adobe product. I know it is not. The problem I am having IS with the Adobe product and the message I receive concerning "This license has already been fulfilled....." appears to be the result of the Adobe product. I had Googled Adobe Digital and discovered what I felt were conflicting or at least ambiquus statement including: http://http://forums.adobe.com/thread/1232101.
Anyone else have any thoughts? I DID send a help request to Overdrive but have not yet heard back from them.

Office 2010 In-place upgrade from Standard to Professional Plus

Hi,
My current customer bought licenses (MAK keys) for both Microsoft Office 2010 Standard and Office 2010 Professional Plus. The majority of the estate will use Office 2010 Standard, with about 10% of the users using Office 2010 Professional Plus.
I'm looking for a way to "upgrade" Microsoft Office 2010 Standard to Office 2010 Professional Plus, so I can deploy Office 2010 Standard as part of the installation baseline. I can successfully upgrade the existing Standard installation to Professional
Plus, but after the installation any of the applications present in Standard show two licenses (one Standard license and one Professional Plus license).
Is it possible to de-register the Office license during installation of Professional Plus or do any of you perhaps have another method to solve this?
Thanks for your assistance.
Kind Regards,
Stefan Hazenbroek
MCSE:S,MCITP:EA,MCITP:EMA2007,MCITP:EMA2010

Hi Don,
Thank you, it does help. My OCT is set to "Default Setup behavior; earlier versions of installed programs are removed". This works fine, all programs run successfully etc, the upgrade runs without any problem.
However, the license for Office 2010 Standard is not removed/replaced during installation. Which means that after the upgrade, the applications show that two licenses are required. I am wondering if there is a way to tell during installation to remove previously
installed licenses, to manually remove the license or any other way.
The customer is using KMS, so in terms of activation it's no issue. I am wondering though if it's an issue in licensing itself. Because if we follow this scenario, when Office Pro is deployed, a workstation seems to need two licenses. If this is fine in
licensing terms, I'm okay. If it isn't, I need to find another solutions.
Thanks again!
Regards,
Stefan Hazenbroek
MCSE:S,MCITP:EA,MCITP:EMA2007,MCITP:EMA2010

Worth upgrading from Elite to Elite Plus?

I am about $195 shy of hitting the Elite plus level. Not sure if it is worth my while to spend another $200 to hit the Elite+ level or just stay put at Elite.
I am pretty sure I won't be making as many big purchases as I did this year in the following year and also I shop online a lot from other stores as well....I am not seeing any major benefits of having Elite+ account at this point.
Could anyone share their experience here if they were in the same boat...if Elite+ was totally worth it or not...Thanks!

Hello dawizard!
Congratulations on your Elite status and almost making it to Elite Plus! It is disheartening to hear that you may not feel becoming a My Best Buy™ Elite Plus customer is worth the remaining $195 it would take to get you there.
With Elite Plus, you would receive a 25% point bonus (an additional 15% on top of the 10% you receive as an Elite customer) as well as an extended return and exchange period of 45 days, whereas an Elite member receives 30. Furthermore, while you currently qualify for free standard shipping regardless of the order total, you would receive free expedited shipping.
I hope that you feel these benefits' value is worth spending the remaining amount. If you should have any questions, please let me know!
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Migrate from WCS 7.0 to Prime Infrastructure 1.2

Hi All,
I am looking for advice on the licensing and upgrade path for going from WCS 7.0 to PI 1.2.
At present I have a WCS licensed for 200 APs which is managing one controller and 150 APs.
I intend to use the Cisco Prime Upgrade Promotion
to order R-W-PI12-M-K9 (WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration)
and L-W-PI12-100-M and L-W-PI12-100-M to match the number of licenses on the WCS.
Once Prime is installed I also want to manage another 50 devices, does that mean I have to purchase the
Cisco PI 1.2 Base License and Software (R-PI12-Base-K9) and another 50 Lifecycle licenses, or will
my existing 200 licenses from the upgrade suffice.
Sorry if it's confusing, but I didn't invent the licensing structure just trying to make sense of it all.
TIA

You'll be able to manage up to 200 devices/APs simpy using the upgrade from WCS to PI 1.2 as you described it. No need to order another base license or 50 lifecycle licenses.

Upgrading from Logic 7 Academic to 8 re:passwords & serial numbers

Today I bought the Logic 8 upgrade from the Apple store. When I tried to run the upgrade procedures
it asks for the Logic 7 Academic serial number. All I can locate is the XSKey Serial number and when I enter it says it is invalid. Is there another serial number hidden somewhere so I can get up and running on Logic 8?
Thanks

There are several ways to answer your post - let me have a go at three:
1) The serial number for Logic 7 is on the front of the "Installing Your Software" booklet that came with Logic 7
2) The normal installation process for Logic Studio allows for either serial number to be entered or for your XSKey to be plugged in, though several people have reported problems with this. Search the forums for "serial number" and you'll find plenty of posts like your own.
3) Your main concern, however, should be that you may not be eligible for an upgrade. Logic 7 Academic is (at least in the States) not a valid upgrade path to Logic 8. You have to buy a new licence and that means paying full price unless you still qualify for academic pricing. That ruling does not seem to apply worldwide and I've even heard of people in the States who have been able to upgrade from an Academic Logic 7 licence to Logic 8. SOmetimes they had a non-academic licence number, sometimes they had a non-academic XSKey. I did hear of someone who bought an upgrade as you did who was able to get their money back but there's no guarantee.
If you fall foul of number 3, don't shoot me - I'm only the messenger ;o)
Pete

WCS base upgrade to PLUS license question

I have a 50 AP base WCS running. What kind if license do I need to order to be able to do location? These two have the same price, but can I upgrade to 100 WPLUS from 50 BASE by ordering the second one?
L-LIC-WPLUS-50
50 AP WPLUS license (Delivery via Email)
L-LIC-WPLUS-100U
50 to 100 AP WPLUS upgrade license (Delivery via Email)
Thanks,
Tao

You would need an upgrade license to go from base to plus.
CISCO BASE-TO-CISCO PLUS UPGRADE FOR EXISTING CUSTOMERS (WCS-PLUS-UPG-K9)
• If you are an EXISTING customer who wants to upgrade from a Cisco Base to Cisco PLUS license, order WCS-PLUS-UPG-K9 and select one of the Cisco WCS PLUS upgrade options below:
WCS-PLUS-UPG-50: License supports up to 50 access points. <---------------------
WCS-PLUS-UPG-100: License supports up to 100 access points.
WCS-PLUS-UPG-500: License supports up to 500 access points.
Note: The number of WCS-PLUS-UPG-K9 licenses purchased must equal or exceed the number of installed WCS Base licenses for the Cisco WCS to register as a Cisco WCS PLUS system. Thereafter, additional capacity is added by ordering PLUS licenses.
http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html

Trying (and Trying) to upgrade from Basis to Plus Membership

Does anyone have any suggestions on what i can do to upgrade.
I have chatted with 3 different Adobe reps about this and they were not able to give me any help. I have called Adobe and sat on hold for over 1 1/2 hours, sent messages to tech support and no one gives me any usefull assistance. All they kept telling me to do is to go to my Photoshop.com account and upgrade from there, but all that gives me the ability to do is to buy more online storage but I want the "extras" that come with the Plus Membership. I sent a message to tech support and they finally sent me an email and all it did was guide me to a forum that shows me all the other people who are having the same problem. This membership is about $49.00 so i have to wonder if Adobe doesnt want the revenue from all these people who are wanting to upgrade. I am litterly at my wits end here, i am frustrated with the customer service of Adobe. This should be a very basis thing to do but it is a nightmare. Any suggestions would be great. Thanks everyone.

Kari,
I see that you've posted your issue in the Photohsop.com forum. That's likely a much better place than this forum (Photoshop Elements), since real Adobe employees post there and are often (but not always) quite helpful in resolving basic membership problems. There are almost no posts in this forum by Adobe employees or people who have much experience with Photoshop.com.
For what it's worth, Adobe seems to have finally acknowledged at a very high level that they have serious problems with customer service:
http://forums.adobe.com/thread/484712?tstart=0

Upgrading from iPhone 5 to iPhone 6 Plus after Water Damage

My iPhone 5 fell in water back in October of 2014. I placed the phone in a bag of rice for 3 days
straight when it happened. It dried out fine and worked like nothing happened. Didn't matter I had
to upgrade to the iPhone 6 Plus anyways since it was released around that time. I decided to leave
my last existing backup on my computer (that I did before the phone dropped in water), and not backup
the phone after the water drop. Because the data could potentially be corrupt due to the oxidization of
components inside. Long story short I have the iPhone 6 plus now I got yesterday.
What I need to know:
My iPhone 5 still works but obviously it now doesn't have a working sim card. There are apps I wanted to
take snapshots of, or files I wanted to export from various places from after the water drop happened (which
I never backed up for reasons mentioned above. I already did a backup restore to the new iPhone 6 Plus from
the backup file made prior to the water drop. The iPhone 6 Plus is working flawlessly.
Can I use both phones at the same time with the apps going at the same time? Or will their be a weird
lockout conflict of sorts? Remember one phone has a working sim, but the apps will be the same as the
old phone and I don't want to use both at the same time if it will cause problems.

It won't cause problems to use both. Of course without a sim card in the iPhone 5 it will be just a glorified iPod touch now and will have no access to cellular networks, sms, etc. But it will at least work, and any apps that can run over wifi will continue to work as before.
You might find an app like iExplorer (http://www.macroplant.com) useful for getting any remaining info off your iPhone 5 and onto your new iPhone 6 Plus.

I have just upgraded from Windows XP to Windows 7 then reinstalled the CS4 I had previously paid for (including the unique code number). Now I get an error message that says "Licencing has stopped working".

I have just upgraded from Windows XP to Windows 7 and then reinstalled CS4 (purchased a couple of years back and paid for) then input the unique code number. Now I get an error msg that says "Licencing has stopped working". What do I need to do?

Hello Carole,
Please try the steps mentioned in the link below:
Error "Licensing has stopped working" | Windows
Thanks
Alisha

I have lost nearly all my photos and events. I received a message effectively saying that I need to upgrade from an old base. I think I may have tried to open an event that was stored in iPhoto Buddy a few days ago.

I have lost nearly all my photos and events. I received a message effectively saying that I need to upgrade from an old base. I think I may have tried to open an event that was stored in iPhoto Buddy a few days ago. iPhoto Buddy is not supported in Lion. How can I retrieve my phjotos?

What version of iPhoto?
Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Upgrade from trial pages to licenced

i have recently purchased pages from the app store,but im unable to upgrade from trial to licenced, i recieved email but no licence number can anybody tell me how to retrieve my licence number please.

Mark is correct; apps from the Mac App Store do not have licenses codes. He's also correct that you will need to completely uninstall iWork:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=105&mforum=iworktips ntrick
and then go to the Purchases section of the Mac App Store and download Pages again. That should then work.
Regars.

Upgrade from WCS Base to Plus Licence

Similar Messages

Maybe you are looking for