Upgrade From Win 8.1 to Win 10 failed

Hi I've tried numerous times to upgrade from Windows 8.1 x64 to Windows 10.I've used the HP Support tool to confirm that I have applied all the latest drivers and BIOS updates. I receive the below error message before being returned back to Windows 8.1.... 0xC1900101 - 0x20017
The installation failed in the SAFE_OS phase with an error during BOOT operation I've read that the issue could be related to my dual band wifi card, so I removed the card and retried, but still got the same issue. Can anyone assist? thanksKev.

You should have a look at this: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/errors-when-trying-to-update-to-build-10074-from/2fa7fc91-5863-4ddf-a0cd-183f2d38bcbd

Similar Messages

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

Hey hvbnfrgvn,
Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
I hope this information helps, please keep me posted on how it goes.
Best of luck and have a great day!
I worked on behalf of HP.

Upgrade from win 8.1 pro to win 8.1 enterprise without loosing all settings & programs

I would like to upgrade from win 8.1 pro to win 8.1 enterprise without loosing all my current settings and programs...
Is there a way?
Many thanks
Sepp
Thanks Sepp

Hi,
I think this design by default, you can refer to the link below for the statements:
Windows 8 and Windows 8.1 Upgrade Paths:
http://technet.microsoft.com/en-us/library/jj203353.aspx
Roger Lu
TechNet Community Support

T410 Windows 7 Upgrade - from Win 7 Pro 32 to Win 7 Ultimate 64.

I purchased a T410 with Win 7 Pro 32 and am looking for the option to upgrade it to Win 7 Ultimate 64.
The shop in the country (Singapore) do not provide such option/customization.
Called tech support in the country without getting much info (they said they only support hardware).
Tried Lenovo shop in the country and they will only help to upgrade to Pro 64 with a charge, however without any recovery media (OS and drivers). I need Ultimate 64.
Browsed Lenovo site and couldn't find anything relevant.
Hope someone will give me the direction to upgrade from Win 7 Pro 32 to Win 7 Ultimate 64 (with all drivers).
- Hong
moderator edit: subject line adjusted for clarity

Dear Yannick Plavonil,
That discussion was started by me only on dell community and it was not resolved.
However if I upgrade can I revert back to Win 7, if something does not resolve or some of the devices
connected to the motherboard do not work?
Regards,
Ravi

After upgrading from win 7 - win 8, do I really need the win 7 recovery partition?

Hello.
I'm a happy camper after upgrading my HP Spectre XT from win 7 to win 8 (Win 8 upgrade offer). The 128GB SSD disks just makes everything so smooth and fast.
However I am abit annoyed with the Win 7 recovery partition that still uses 20 GB of my total 128GB space.
I have tried searching the forums, as well as the www for any good answers, but I end up more confused.
So I am asking the community some questions that interests me, and hopefully you can provide me with some meaningsful answers
1. Can I now delete my win 7 recovery partition, and if so what is the most effiecient and safe way to do it?
2. Is there a a good way to make sure that if (heaven forbid) something would happen, I still would be able to recover my notebook preferably to win 8, and not the preinstalled OEM win 7?
3. Of course the Spectre XT has no optical drive, so if its doable I might need to make an win 8 recovery partition in the end. Is it possible?

You can use Windows builtin Disk Management to delete the partition, or EaseUS software. Both procedures are outlined at EaseUS site:
http://www.partition-tool.com/resource/windows-8-partition-manager/delete-windows-8-partition.htm
As for a Recovery option after deleting, look at System Imaging which is builtin Windows 8 also.You need an external USB hdd for this.
http://www.eightforums.com/tutorials/8956-system-image-create-windows-8-a.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Multimedia audio controllers not found? Upgrade from Win XP to 7 on HP 1129n. Please help

so i upgraded my hp 1129n (oldschool li know) from win xp to 7, The install went smoothly except for the audio. Went into device manager and there is a question mark on other devices > multimedia audio controller.
I have searched everywhere for the driver update but its no where to be found, not on hp's site or i cant find it on the web. I have attempted to run windows vista sp37322 but no luck. i have changed the compatibilty to windows vista sp 2 and windows xp sp 2 and 3 and ran as administrator to see if i could get something but it still wont let me telling me error
UNINITIALIZED VARIABLE , UNDEFINED FUCNTION ON UNQUOTED STRING
ON LINE 433 OF W:\PATECHES\IP\SP37322\INSTALL.WBT
IF OS == "VISTA"
please help. Not sure how else to get the proper multimedia audio controller to get it fully functional.
thanks for your help

so i upgraded my hp 1129n (oldschool li know) from win xp to 7, The install went smoothly except for the audio. Went into device manager and there is a question mark on other devices > multimedia audio controller.
I have searched everywhere for the driver update but its no where to be found, not on hp's site or i cant find it on the web. I have attempted to run windows vista sp37322 but no luck. i have changed the compatibilty to windows vista sp 2 and windows xp sp 2 and 3 and ran as administrator to see if i could get something but it still wont let me telling me error
UNINITIALIZED VARIABLE , UNDEFINED FUCNTION ON UNQUOTED STRING
ON LINE 433 OF W:\PATECHES\IP\SP37322\INSTALL.WBT
IF OS == "VISTA"
please help. Not sure how else to get the proper multimedia audio controller to get it fully functional.
thanks for your help

BIAS SoundSaver Input Level Not Working after upgrade from Win 8 to 8.1

Have been using BIAS SoundSaver for INport software to digitize music LPs and cassette tapes to load on MP3 player. Worked fine with Windows 8. However, now that I have upgraded to Win 8.1, I can get sound of LPs and cassette tapes but the Input Level that controls the recording level on the software no longer functions. My computer is an HP ENVY Phoenix h9-1355 Desktop Computer with IDT High Definition Audio CODEC. I am wondering if the problem may be with the audio drivers installed on the computer.
This question was solved.
View Solution.

Hi @Alkay
I see that you are having sound issues after your 8.1 upgrade. Did you update to the 8.1 versions of the drivers?
They may be found here: HP ENVY Phoenix h9-1355 Desktop PC Drivers
Is it only the one application seeing this problem?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Can't activate secure boot after upgrading from Win 7 to Win 8 on a Spectre XT

Hi everybody,
my first post here, so please forgive me if the topic has already been discussed
I did search before posting anyway, but I couldn't found anything addressing this specific point.
My (small, I must admit) problem is as follows:
I recently purchased a Spectre XT 13-2005tu (i7 processor, 4Gb RAM, 256Gb SSD) with Windows 7 pre-installed.
After installing my favourite applications and using it for a few weeks without any trouble, I thought to take the opportunity of the $14.99 upgrade to Win 8, so I downloaded Windows 8 Pro and installed it (as an upgrade, rather than a fresh installation, because I didn't want to loose the customizations I already made).
I also installed all the updates available on HP website (sp59158 for updated BIOS, sp58404 for UEFI support, ecc.)
The whole upgrade worked nicely, and the PC is now up and running with Win 8.
Now, I'm trying to use at best all the possibilities Win 8 has to offer, and among them, the UEFI secure boot.
I found the "legacy support" option in the BIOS settings, which as I understand must be disabled to activate the UEFI secure boot, but if I do that the PC tells that there's no operating system on the disk and doesn't boot anymore.
Which was a bit scary by the way, but eventually I could re-enable the legacy support in the BIOS and have the PC working again, but of course with no secure boot.
I suppose there must be some other re-configuration that should be done before changing the BIOS parameter, but I couldn't find any instruction for that anywhere on the web.
On the other hand, it would be indeed weird if the secure boot could not be configured AFTER the OS upgrade, and a new fresh installation would be necessary.
I'd rather part with the secure boot than re-install everything, but that would be a shame... :-(
I hope someone can explain what should be done, many thanks in advance!

Thanks for your feedback, but I don't think your issue is the same as the one I previously explained.
The UEFI/secure boot setting is a basic configuration affecting the way the PC boots, regardless of whether it is connected to a network or not.
By the way, in the meantime I've seen in a shop exactly the same PC model which I'm using, now sold with Win 8 pre-installed, and it was working with the UEFI enabled (= BIOS "legacy support" disabled).
Therefore, the configuration I'm interested in has to be feasible, one way or another...!

Upgrade from Win 32 to X64 Configuration- HashTrailingSlash error.

Hi,
We upgrading from VS2008 to VS2013. In our product we have 3 solution(.sln) files (for server, rep and client).
Server and rep migrated successfully to VS2013 with .vcxproj and filters files created
In client solution file we have some win32 configuartion projects and we successfully converted them into x64 configuration and .vcxproj files updates successfully.
I did checked in all .vcxproj, filters and .sln files into version control tool.
In another window machine which has build environment I did synced all the files and successfully build server and rep using respective .sln files.
But in client solution file many projects fails loading with the below error
Reloading the projects fails with below error
Upon looking at MS support site and other sites which suggests not to have semicolon(;)in the path provided. But the other 2 solution files builds successfully with the same environment (paths) set. We
did tried building whole client solution, it’s failing with following error
Does anyone has the solution for this problem?
Appreciate your response.
-ThanksMahesh

Hi Mahesh,
Thank you for posting in the MSDN forum.
Which kind of projects did you upgrade from the VS2008 to VS2013? Is it the simple VC++ console project or others?
>> In client solution file we have some win32 configuration projects and we successfully converted them into x64 configuration and .vcxproj files updates successfully.
Do you mean that you add the new configuration under Build->Configuration manager?
https://msdn.microsoft.com/en-us/library/9yb4317s.aspx
To make sure that whether you upgrade your solution successfully, please open your projects, and then clean and rebuild your whole solution in Solution Explorer windows using the VS2013, if you get any error messages or warning messages,
you have to resolve them one by one.
>> I did checked in all .vcxproj, filters and .sln files into version control tool.
Do you mean that you use the TFS-version control? Anyway, my suggestion is that you would check whether you could build your project locally before you check in it with version control tool.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sound glitches after upgrading from win 2000 to win

Hello!
I have this sound card since 2 years and never had any problems... but since I've upgraded from windows 2000 to windows xp, there's a lot of glitches in the sound coming from the card (it happens with all softwares I use). I'm using a sound blaster audigy 2 nx (latest drivers) on a P4 2GHz with 52 Mb Ram. Thanks in advance!

What version of the Oracle ODBC driver are you using? 8.01 is not a driver version-- it should be something like 8.1.7.x.y (assuming you're using one of the 8.1.7 Oracle ODBC drivers).
Since Oracle desupported the 8.1.7 database almost a year ago, do you have the option of upgrading the Oracle client to a supported release (probably 9.2 in your case)?
Unfortunately, I don't know what your particular problem is, but I have certainly seen problems mixing the latest and greatest versions of applications with older versions of the Oracle client.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Upgrade from SCCM 2012 SP1 CU4 to R2 Fails - Unsupported Upgrade Path

Hi everybody,
I'm currently upgrading our SCCM infrastructure to SCCM 2012 R2 after have finished with the upgrade from SCCM 2012 RTM to SP1 CU4, thus far everything works fine, but when I try to update any
of the site servers, whether CAS or Primary, I'm getting the following error message in the Prerequisites Check:
I've gone through the system requirements and prerequisites over and over again and I can assure you that every possible update, supported OS, feature set, SQL Server, check list, etc,
etc, have been followed as per the official documentation available, however I'm stuck in this point, and surely enough I haven't been able to find out a similar case.Additionally I'm adding
the ConfigMgrPrereq log (the relevant portion of it) in case someone could kindly take a look at it.
<04-25-2014 02:06:46> ******* Start Prerequisite checking. *******
<04-25-2014 02:06:47> ********************************************
<04-25-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade,
minimum supported installed build version is [7804].
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Unsupported upgrade path;    Error;
Configuration Manager has detected that one or more sites in the hierarchy are installed with a version of Configuration Manager that is not supported for upgrade.
<04-25-2014 02:07:00> INFO: This rule only apply to primary site, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Active Replica MP;    Passed
<04-25-2014 02:07:00> INFO: This rule only applies to primary or secondary site in hierarchy, skip checking.
<04-25-2014 02:07:00> INFPROSCCMCMS.usersad.everis.int;
Parent site replication status;    Passed
<04-25-2014 02:07:00> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:00> ===== INFO: Prerequisite Type & Server: SQL:INFPROSCCMCDB.usersad.everis.int
=====
<04-25-2014 02:07:00> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:00> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;
SQL Server sysadmin rights;    Passed
<04-25-2014 02:07:00> INFPROSCCMCDB.usersad.everis.int;    SQL Server sysadmin rights
for reference site;    Passed
<04-25-2014 02:07:00> INFO: CheckLocalSys is Admin of <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Site server computer account administrative rights;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server security mode;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: OS version:601, ServicePack:1.
<04-25-2014 02:07:09> INFO: Target computer is a Windows server.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Unsupported site server operating system version for Setup;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Domain membership;    Passed
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Pending system restart;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: Return code:0, Major:10, Minor:50, BuildNum:4000
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server version;    Passed
<04-25-2014 02:07:09> INFO: Get Sql edition:Enterprise Edition.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Edition;    Passed
<04-25-2014 02:07:09> INFO: Checking Tcp is enabled to Static port, SQL Server:INFPROSCCMCDB.usersad.everis.int,
Instance:.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
SQL Server Tcp Port;    Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is limited.
<04-25-2014 02:07:09> INFO: SQL Server memory is limited.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Configuration for SQL Server memory usage;    Passed
<04-25-2014 02:07:09> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
<04-25-2014 02:07:09> INFO: Installing the central administration site or primary site, requires SQL
Server to reserve a minimum of 8 gigabytes (GB) of memory.
<04-25-2014 02:07:09> WARN: SQL Server minimum memory is 8000 MB.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;    SQL Server process memory allocation;
Warning;    Configuration Manager requires SQL Server to reserve a minimum of 8 gigabytes (GB) of memory for the central administration site and primary site and a minimum of 4 gigabytes (GB) for the secondary site. This memory is reserved by
using the Minimum server memory setting under Server Memory Options and is configured by using SQL Server Management Studio. For more information about how to set a fixed amount of memory, see
http://go.microsoft.com/fwlink/p/?LinkId=233759.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Case-insensitive collation on SQL Server;    Passed
<04-25-2014 02:07:09> INFO: Check Machine FQDN: <INFPROSCCMCDB.usersad.everis.int>.
<04-25-2014 02:07:09> INFO: getaddrinfo returned success.
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Validate FQDN of SQL Server Computer;    Passed
<04-25-2014 02:07:09> INFO:CheckSupportedFQDNFormat <INFPROSCCMCDB.usersad.everis.int>
<04-25-2014 02:07:09> INFO: NetBIOS <INFPROSCCMCDB>
<04-25-2014 02:07:09> INFPROSCCMCDB.usersad.everis.int;
Primary FQDN;    Passed
<04-25-2014 02:07:09> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:09> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:09> ===== INFO: Prerequisite Type & Server: SDK:INFPROSCCMCMS.usersad.everis.int
=====
<04-25-2014 02:07:09> <<<RuleCategory: Access Permissions>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking access permissions...>>>
<04-25-2014 02:07:09> INFO: The rule 'Administrative rights on site system' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> <<<RuleCategory: System Requirements>>>
<04-25-2014 02:07:09> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
<04-25-2014 02:07:09> INFO: The rule 'Unsupported site server operating system version for Setup' has
been run on server 'INFPROSCCMCMS.usersad.everis.int', skipped.
<04-25-2014 02:07:09> INFO: The rule 'Domain membership' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:09> INFO: Windows Cluster not found on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Failover Cluster;    Passed
<04-25-2014 02:07:10> INFO: The rule 'Pending system restart' has been run on server 'INFPROSCCMCMS.usersad.everis.int',
skipped.
<04-25-2014 02:07:10> <<<RuleCategory: Dependent Components>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
Windows Deployment Tools installed;    Passed
<04-25-2014 02:07:10> INFO: CheckAdkWinPeInstalled on INFPROSCCMCMS.usersad.everis.int.
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;    Windows Preinstallation Environment
installed;    Passed
<04-25-2014 02:07:10> INFPROSCCMCMS.usersad.everis.int;
SMS Provider machine has same domain as site server;    Passed
<04-25-2014 02:07:10> <<<RuleCategory: Site Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking if the target ConfigMgr site is ready to upgrade...>>>
<04-25-2014 02:07:10> <<<RuleCategory: Database Upgrade Requirements>>>
<04-25-2014 02:07:10> <<<CategoryDesc: Checking the target ConfigMgr database is ready to upgrade...>>>
<04-25-2014 02:07:10> ***************************************************
<04-25-2014 02:07:10> ******* Prerequisite checking is completed. *******
<04-25-2014 02:07:10> ******************************************<04-25-2014 02:07:10> INFO: Updating
Prerequisite checking result into the registry
<04-25-2014 02:07:10> INFO: Connecting to INFPROSCCMCMS.usersad.everis.int registry
<04-25-2014 02:07:10> INFO: Setting registry values
If you wonder whether it might be related to this error:
-2014 02:07:00> INFO: Detected current installed build version [7711] for sitecode [BRA]. For Upgrade, minimum supported installed build version is [7804].
I confirm that this one site is a secondary one that's attached to a primary site and this log is from the CAS server, I managed to tall it and delete it from that site, but still appears listed
on the CAS management console, any idea how to force the removal of a secondary site that's attached to a primary from the CAS site when it has been removed already from said primary?
I've already tried the
Preinst /DELSITE XXX command but it only works when the site to remove it's attached to the local site and certainly not from a CAS
Finally, the version, build number and everything is correct, no idea what could be the problem, does anybody know a way to bypass this or force the re-evaluation of this rules, I've got
the impression that it's being cached somehow.
Any help would be highly appreciated,
Thank you.
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Hello again everybody,
I've finally managed to fix this up, in the end I had to delete those entries manually from the database as Garry suggested. After this was done the upgrade has gone through as expected with no further ado and has finalized already, now moving on to the
primary sites.
If anybody out there is facing the same issue, what I did was to delete those "stubborn" records executing the following statements over the CAS database:
DELETE
FROMServerDataWHERESiteCode='XXX'
DELETE
FROMSC_SiteDefinitionWHERESiteCode='XXX'
And this is pretty much about it. I'd recommend to take a proper backup first though as best practice.
Thank you all anyways for your answers and comments,
Marcelo Estrada MCP-MCTS-MCITP-MCSA-MCSE

Upgrade from 3.0 to 3.0.1 fails

Not sure if is should be concerned but i upgraded to 3.0 then got the email to upgrade to 3.0.1. I followed the instructions unplugging and such that are on apple website. I can download the upgrade. At the end of the download 100% the apple logo flashes (not restart) and goes back to normal. I then check out the ver and it is still 3.0. If i force it to reboot after the download it is still 3.0. I have done this about 10 times with the same result. Mind you I have no problems, yet, with the 3.0 so maybe i should be happy that it won't upgrade.

Sounds very similar to my issue:
http://discussions.apple.com/thread.jspa?threadID=2226287&tstart=60
I still can't get it to upgrade from 2.4 to 3.0.

ABAP/J2EE upgrade from 7.0 to EHP1...failed at START_J2EE_EP

Hi experts,
I'm currently running a dual stack upgrade from 7.0 to EHP1 SR1 on a 32bit windows system. I'm using SAPup and Jup and I'm currently stuck on the Java step START_J2EE_EP the main clue I get from the logs is "Can't open shared memory administration (rc = 3)"......there's also another similar message with a different return code - " Can't open shared memory administration (rc = -107)"....
I can't seem to find anything that has resolved the problem.
Any help would be much appreciated.
Cheers,
JB

Hi Martin,
Thanks for the info.
I basically changed the phase list xml file so that I could skip over this step as well as others that depended on waiting for the events from the parallel ABAP upgrade.
So I was able to finish the uprade successfully. But I tried to update the java stack with the latest support pack stack and it failed part way through. Now my server0 won't start......I'll be posting the problem shortly in a new thread.
Thanks again!
JB

How to upgrade from Win 8.1 w/ Bing to Win 8.1 Professional

Hello,
I just purchased an HP 400-413 Desktop PC from Best Buy and it came with Win 8.1 w/ Bing. I would like to upgrade to Windows 8.1 Professional. Can i simply purchase an upgrade license to unlock the professional features like Joining a Domain and RDP, or
do I have to re-install windows from scratch with Windows 8.1 Professional? If it is possible to just purchase an upgrade license, how do I do this and how much does it cost? Thanks
Ryan

Hello Ryan,
Do you want to upgrade Windows 8.1 to Windows 8.1 pro?
We don’t need to reinstall the Windows 8.1 pro, we can add the Windows 8.1 pro pack.
For more information about upgrading to Windows 8.1 pro, please take a look at the following article.
http://windows.microsoft.com/en-us/windows-8/feature-packs
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Upgrade from win 7 to win 8.1 issue

I updated my win from 7 to 8.1 my WiFi adapter is not able to identify network.
prior to upgrade when i was in win 7 it was working.
Can some guide with troubleshooting steps that i can do.
I did uninstall the network adapter couple of times but no luck and ran troubleshooter as well but no luck.
When i ran the troubleshooter and at the end it throws an error saying the default gateway is not available .
network config is set up DHCP .
Can some one guide me here

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Upgrade From Win 8.1 to Win 10 failed

Similar Messages

Maybe you are looking for