Upgrade from Windows2008R2 SP1 standard to Windows2008R2 Enterprise

HI
Like the title, I want to upgrade server from Windows2008R2 SP1 standard to Windows2008R2(SP1) Enterprise.
I have tried to do that with Windows2008R2 SP1 disc. But cannot finish with the error below
windwos cannot install required files, make sure all files required for installation are availabe, and restart the
installation. Error code:0x800700B7
question1
when I insert the Windows2008R2 SP1 boot disc, there is a upgrade option, can I use that?
question2
I also did some research, DISM can be used to change edition. Is it the only way to do that?
PS, re-install is unavailabe.

For Windows Server 2008 R2 and above, the recommended way to upgrade edition is to use DISM.
You can follow this article on upgrading edition:
http://blog.ylnotes.com/upgrade-windows-server-edition-using-dism/

Similar Messages

Upgrading from Oracle 9i Standard edition to Enterprise.

I want to upgrade my database from oracle 9i(9.2.0.6) Standard edition to Enterprise edition.
Please suggest me as to what is the best suitable method
I was thinking of installing EE directly on Standard edition so that all the things remain intact is it possible?
Also if not then can backup and restore be used?
Thanks in advance

hi.
right now i have standard edition already installed as i said earlier. I want to upgrade from SE to EE because of using advance features like partitioning. DB size is 40 GB.
I know exp/imp would take a lot of time that's why I thought it is not a viable path.
regards,
pranav

Upgrading from Oracle 10G standard edition to Oracle 10G enterprise edition

Hi
I want to upgrade from Oracle 10G standard edition to Oracle 10G enterprise edition. Is there any script provided by oracle which I can run on existing Oracle 10G standard edition to upgrade to enterprise edition after completing the licensing formalities or do I need to install Oracle 10g Enterprise edition from scratch and then migrate my data.
Ramanbir S

You will not need to perform any data migration to upgrade to EE. The diffetence between standard en enerprise editions are the features offered. When you upgrade you can use the same set of files you used to install standard edition and just add the enterprise edition features you want to use in the 'Custom' section of the Universal Installer.

Could I upgrade my 2008 r2 Standard license to Enterprise ?

Could I upgrade my 2008 r2 Standard license to Enterprise ?
is there anything related to 2012 licenses ??

Hi,
There are no possibility to upgrade your 2008 R2 Standard Edition to Enterprise Edition. It was possible only before the availability of the 2012 Version for customers with active Software assurance for Standard Edition in open value with the step UP license
from Standard to Enterprise.
Actually, the only way to have the 2008 R2 enterprise Edition is to purchase the Standard Edition of Windows Server 2012 R2 Version than you may downgrade to the Enterprise Edition 2008 R2.
Note: for Enterprise Edition 2008 R2 you have one physical + 4 VMs. if you downgrade your Standard Edition 2012 R2 to Enterprise 2008 R2, you receive only 2 VMs for your Enterprise Edition. If you wants to have 4 VMs, than you need two Windows Server 2012
R2 Standard Edition licenses.
I hope is helpful
thanks
diramoh

Can I upgrade from cs5 design standard to cs 5.5 design premium?

Hi all,
Can I upgrade from cs5 design standard to cs 5.5 design premium?
thx

http://www.adobe.com/products/creativesuite/design/buying-guide.displayTab2.html
Mylenium

Price to upgrade from Server 2008 Standard to Server 2008 R2

I need to get the price to upgrade from Server 2008 Standard to Server 2008 R2.
I performed the upgrade and now have a valid license for 180 days. What is the upgrade price and how do I get the license?

Hi, go here to download the licensing information for W2k8 r2
http://www.microsoft.com/en-us/download/details.aspx?id=18795
Thanks
Isaac Oben MCITP:EA, MCSE,MCC <a href="https://www.mcpvirtualbusinesscard.com/VBCServer/4a046848-4b33-4a28-b254-e5b01e29693e/interactivecard"> View my MCP Certifications</a>

Can I upgrade from Acrobat XI Standard to Pro?

Can I upgrade from Acrobat XI Standard to Pro?

As I indicated, the store gives an upgrade from Std to Pro, though I think the price is not appropriate. If you go to the basic page for Acrobat, they are no pushing the subscription version. If you do to the buying guide you get the regular version option (http://www.adobe.com/content/dotcom/en/products/acrobatpro/buying-guide.html). The upgrade is $199, which I think is crazy. Something like $70 is more appropriate, the difference in cost between Std and Pro upgrades, or at least $150 for the difference of the full products. If the Std had been an upgrade, the cost of a full upgrade is not reasonable. Anyway, a screen capture of the cost is below:
So apparently the guys on the chat have no clue what they are talking about. However, that does not surprise me. What bothers me is some of the unreasonable pricing as I see it in the store.

Installing upgrade from Acrobat XI Standard to Acrobat Xi Pro

I am trying to install an upgrade from Acrobat 11 Standard to Acrobat 11 Pro. I have purchased and upgrade license. When I try to install the Pro upgrade, I get a message that a product with higher functions is already installed and it terminates the install. Does anyone have any suggestions?

I would recommend you uninstall Std, run http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over Acrobat folder parts (in Program Files>Adobe), reboot, and install. You will likely have to give the S/N for Std as the qualifying product for XI Pro.

SCOM Gateway Server Upgrade from 2012 SP1 to R2

Hi,
I am upgrading our SCOM environment from 2012 SP1 to R2. But unable to upgrade the Gateway Server. The installation of R2 setup stops with error message: "The operation manager gateway can't be installed on a computer on which the Operation Manager
management server, Operations Console, operational database, web console, agent, System Center Essentials, or System Center Service Manager is already installed."
I checked none of the above component is installed on the gateway server. Please suggest what is the issue?
Regards,
Daya Ram

Hi,
Have you followed the steps below to upgrade a gateway server:
Log on to a computer that hosts the gateway server with an Operations Manager Administrators role account for your Operations Manager management group.
On the Operations Manager media, run Setup.exe.
In the Optional Installations area, click Gateway management server.
On the Welcome to the System Center 2012 R2 Operations Manager Gateway Upgrade Wizard page, click
Next.
On the The wizard is ready to begin gateway upgrade page, click
Upgrade.
On the Completing the System Center 2012 - Operations Manager Gateway Setup wizard page, click
Finish.
You may check below directory:
C:\Program Files\System Center 2012\Operations Manager
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Flash builder 4 upgrade from Flex 3 Standard

Hiya.
I would like to know from Adobe if the upgrade options available a wrong or not? I've just bought an upgrade from FB3 Standard to FB4 Preminum (from Eligibility chart is SEEMS possible). The installer when I entered my FB3 Standard serial says it's wrong. At this point the possible answers are two for me: the upgrade processes on the site is wrong or there's something wrong with the installer. A would like a clarification as soon as possible.
Thanks.

I run into the same problem.
For me it was the only option available at the adobe online store (upgrade Flex3 -> FlashBuilder4 Premium)
so the registration number didn't work, saying that i have the wong product to upgrade (Flex3 standard)
I had to open a case for software destruction to get a refund for what i've allready payed and if i want the FlashBuilder4 serial i have to re-buy it at the online store
Custumer support told that this is the only solution.
It's a little bit annoying.
That is not a critic to the support team (was very friendly) it's just annoying that i can't get a standad serial for my purchase and that i have to wait some weeks to get the refund...
So be carefully while purchasing the upgrade and look twice to choose the right option at the store.
(Hopfully the right option is now available...)
so long

Upgrading from CS3 Web Standard to CS4 Web Premium problems

So I got my CS4 Web Premium upgrade box in the mail yesterday. I'll be starting a big project in about a week or so and figured I'd do the install and familiarize myself with the enhancements and play with PS, as it has been a while. Anyway, I drop the first of the install disks into my XP Pro SP3 laptop and off I go. I enter the serial number for the CS4 which checks good. Hit next at which point it looks for a previous install of a CS product and does not find one. No problem, I think to myself, as there is a space to enter the previous version's serial number. Enter the serial for the previous version (CS3 Web Standard) which results in a no go in resolving the number. The tool suggests I go back and install the trial version and then deal with the issue with Adobe support. Has anyone else experienced this issue and if so could you please share your experiences and/or resolution path?

I did my homework on this one and purchased the "Upgrade from Creative Suite 3.x" offering. The CS3 works like a champ. When I attempt to do the install of CS4 I get the error message when I enter the CS3 serial number. Any thoughts, guidance or suggestions are welcomed. I'm resistant to going the trial version route for fear that I'll not get resolution in time and have my project impacted. I can probably get by with Fireworks, but PS is preferred and the driving reason for the upgrade. Thanks!

Upgrading from CS4 Design Standard to CS5.5 Design Standard

Hopefully a simple question. I am currently running CS4 Design Standard and wish to upgrade to CS5.5 Design Standard. My version of CS4 itself was an upgrade from the full installation version software of CS2 (I managed to skip the CS3 stage using a previous Adobe upgrade deal). Am I right in thinking that although the CS4 was an upgrade package it is now my 'standard platform' so to speak, and therefore I can use upgrade software again to take me up to CS5.5? I have the serial number for the CS4 software.
Thanks,
Richard

That is correct. Make sure you get the right upgrade…there are several.
Here’s a link on Amazon: http://amzn.to/wZwC6P
Bob

Can I upgrade from SP2010 SP1 to Sp2013 Sp1 without upgrading to SP2010 SP2 first

Hi
I have a farm currently on Sp2010 Sp1 running on Windows 2008 R2.
I want to upgrade to Sp2013 SP1 running on Windows 2012 R2.
Do I need to upgrade the Sp2010 SP1 farm to SP2010 SP2 before I upgrade to Sp2013 SP1.
The plan is to build SP2012 R2 first followed by installing SP2013 Sp1.
The we will then move the content database (119 GB with 500GB of Remote Blob Storage) from Sp2010 environment to the Sp2013 Sp1 environment and use the PowerShell command Upgrade-SPContentDatabase to do the upgrade. But do I need to upgrade
SP2010 SP1 to SP2010 Sp2 before moving the content database to Sp2013 SP1 environment.
Thanks
Nigel
Nigel Price NJPEnterprises

Yes, you can actually go from SharePoint 2010 RTM to SharePoint 2013 (any build). The only exception to that is if you're using RBS on SharePoint 2010, then you must have applied SharePoint 2010 SP1 first.
The December 2012 CU for SharePoint 2010 does have a wide list schema check, so it may be a good idea to apply that prior to the upgrade to 2013, but it isn't a requirement.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Upgrade from Cs4 Web standard to CS5 - only premium available?

I have for the moment CS4 Web Standard software package from Adobe.
But I noticed that there is no upgrade to CS5 Web Standard. It seems there is only a Web Premium.
May we expect that there will be a Standard upgrade also?
Kind regards
Martine

John,
That is not good news. My CS4 Web Standard is also a Student Version. I'm no longer a student.
So can I still upgrade by purchasing the Premium Upgrade.
Or is there a possibility that I can upgrade the Dreamweaver component?
Or is it also possible to install only Dreamweaver CS5 next to my CS4 package?
Thanks for assisting me
Kind regards
Martine

How do I upgrade from Adobe XI Standard to Adobe XI Pro?

I'm trying to upgrade my Standard addition of Acrobat 9 to the Pro version. can someone tell me how to do this?
Thanks!

Hey rachelb79735362,
Could you please clarify whether you wish to upgrade from Acrobat 9 or from Acrobat XI Std. to Pro version.
Adobe does not offer upgrade options from Acrobat 9 Std. to Acrobat 9 Pro version.
Also, with the launch of Acrobat DC version, you can simply upgrade from Acrobat XI Std. to Acrobat DC Pro version.
Please refer the link mentioned below and upgrade to this new Acrobat DC version:
http://success.adobe.com/en/na/sem/products/acrobat/acrobat.html?kw=upgrade
Regards,
Anubha

Upgrade from Windows2008R2 SP1 standard to Windows2008R2 Enterprise

Similar Messages

Maybe you are looking for