Upgrade GAP Analysis from 4.7 to ECC 6.0
Hi Gurus !!!
Does any one have any material regarding GAPs between 4.7 to 6.0 ? I am more interested on SD GAPs
My email is [email protected]
Thx. in advance.
Marco
Hi
Refer below,Hope it helps u
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_erp2004/helpdata/en/c6/feda40ebccb533e10000000a155106/frameset.htm
Regards,
Rajesh Banka
Reward points if helpful
Similar Messages
-
Unicode error while upgrading from 4.7 to ECC 6.0
Hello all,
I am upgrading our SAP from 4.7 to ECC 6.0. while doing so we had folllowing error in the adjoinig statement of Search.
Error : Table I_VBLS must have a character line type (data type C,N,D,T or string)
Statement :
W_TMP10 = I_VBLS-VBELN.
SEARCH I_VBLS[] FOR W_TMP10 STARTING AT 1
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
Now I tried to remove this error by putting a loop on internal table I_VBLS and inside it concatenating the header line with a Field symbol and after that to a string variable. Then I used SEARCH statement for the same string. but unfortunately this is changing the functionality of the program by large extent. Does anybody know the exact code snippet to replace search Internal Table
Edited by: Aalhad Deshpande on Feb 23, 2009 3:18 PM
Edited by: Aalhad Deshpande on Feb 23, 2009 3:19 PMHi,
Try to use this method.
CALL METHOD CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
E:G :-
WRITE crlf TO i_linea-linea2.
In this case also their are not mutually convertable. try to use this method and let me know
CALL METHOD CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
EXPORTING
IM_VALUE = crlf
IMPORTING
EX_CONTAINER = i_linea-linea2
EXCEPTIONS
ILLEGAL_PARAMETER_TYPE = 1
others = 2.
Regards,
Sathish -
R/3 upgrade from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0
Is there a reason to upgrade Solution Manager from 3.2 to 4.0 when upgrading R/3 from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0?
And when in current situation Unicode UTF8 is used, could that give problems during / after the upgrade?Hello ALex,
There is not a must to upgrade also your solman 3.2 when you upgrade your satellites, only consider if you need the solman diagnostic or not and also that the new functionality in solman 4.0.
Which system is unicode, the satellite?
There is also not problems having a non-unicode solman with unicode satellites and the other, having a unicode-solman "linked" to unicode-satellites.
Hope this helps,
Dolores -
Technical Upgrade from 4.6c to Ecc 6.0
Hello All.
We have upgraded the system from 4.6c to ECC 6.0.
We have got SPAU list and Unicode(UCCCHECK) program list.We have shortage of time to resolve both the list.
I have few questions.
1) Do we need to resolve UCCCHECK list first or SPAU list.
2) How we can modify programs,tables in SPAU list.
Could you please give Some step by step need to perform in SPAU list.
3)How we can convert UCCCHEK list
Could you please give STEP by STEP procedure and transaction code.
Thanks in Advance
MuthuHi Muthu,
Please [check this link|http://help.sap.com/saphelp_nw04/helpdata/EN/83/7a18ecde6e11d195460000e82de14a/content.htm].Do the same with SPDD too.
SPAU has to be done before going for the UCCHECK of custom objects.
Thanks,
Sai -
Technical upgrade from 4.7 to ECC 6.0
Experts,
1.We need to make Technical upgrade in HR from 4.7 to ECC 6.0 with OM,PA, -ve Time,Payroll, Recruitment (other Modules also upgraded).Kindly let us know what will haeepen for the following .
A.Configrations in SPRO
B.Previous database (Cluster table for previous Time and payroll run)
C.Master data of employees which is stored in Infotypes
2.Also Kindly let us know is there anything we need to take care after moving from 4.7 to 6.0Hi Kumar,
Basically there needs to be a Transport established between 4.7 and ECC6.00 Version . You can create Transport request for those tables whose value remain same in 4.7 nad ECC6.00 But for tables having changes you need to create the Configuration.
1 more method applied by organization is a client copy of tables.
My suggestion would be like this :
1. Compare and Update Tables (from Configuration Handbook)
Pay Frequency
Define Period Modifiers
V_T549R
Define Date Modifiers
V_T549L
Check Payroll Accounting Area
V_T549A
Pay Scale Structure
Define EE Subgroup Grouping for PCR and Collective Agreement Provision (CAP)
V_503_B
Check Pay Scale Type
V_T510A
Check Pay Scale Area
V_T510G
Check Assignment of Payscale Structure to Enterprise Structure
V_001P_C
Define Default for Pay Scale Data
Feature - TARIF
Setup payroll period for Collective Agreement Provision
V_T510W
Revise Pay Scale Groups and Levels
V_T510
Enterprise Structure for Wage Type Model
T539A
Feature - LGMST
Revise Default Wage Types
V_T539A - already tested
Define Valuation of Base Wage Types
V_T539J
Legacy Data Transfer
T558B
T558D
Define Periods for import
T558B - already tested
Rates of Pay
T512W
Pay Scale Allowance Group
V_T7INA1
Assign Pay Scale Groupings for Allowances
V_T7INA3
Define Basic Codes
V_T7INB4
Statutory
Define Trust Details for Provident Fund
V_T7INF1
Assign Company Rates for Provident Fund
V_T7INF5
Define PF Trust Validity Period
V_T7INF7
Maintain Contribution Details for Provident Fund
Feature: 40EPF
V_T7INF3
Define Contribution Type for Statutory rates for Provident Fund
V_T7INF3 - already tested
Employees' State Insurance
V_511P_B
V_T511P
Maintain Number of Working Days in a Month
V_511K_B
V_T511K
Define Personnel Area and Subarea Groupings for ESI
V_T7INE1
Assign ESI Groupings for Personnel Area and Subarea
V_7IN0P_ESI
Maintain Contribution Rates for ESI
V_T7INE3
Assign Universal Contribution Groupings for Universal Contribution Type
V_T7INOP_ALL
Assign slab code for Universal Contribution Grouping
V_T7INU1
Assign Slab code and other parameters for each state of a universal type
V_T7INU3
Assign contribution Value for each slab
V_T7INU5
Maintain Eligibility Details for Superannuation
Feature - 40SAN
Tax and Professional Tax
Define Professional Tax Grouping Details
V_T7INP1
Maintain Method and Form Layout for Ptax Groupings
T596F
Maintain Re-Computation Behaviour of Tax related
Feature - 40MWT
Maintain Schema for Exemption on Medical Reimbursement / Insurance
V_T7INT9
Maintain Schema for Exemption of Child education and hostel allowance
V_T511K - already tested
V_T7INT9 - already tested
Bonus Act
T511K - already tested
T511P - already tested
One Time Bonus Tax
Copy Wage Types
V_T7INT9 - already tested
V_T7INA9
Define Compensation Area Feature
Feature - CAREA
Assign organizational assignment to Compensation Groups
Feature - CMGRP
Maintain Variant for Payroll Simulation
Feature - 16CVA
Maintain Payslip Variant
Feature - 16EVA
HRA/CLA/LTA
Define Accomodation Types
V_T7INT7
Company Loans
Maintain Loans Grouping
Feature - 40LGR
Mantain Loans Eligibility Checks and Limits
Feature - 40 LGR - already tested
Banking
Setup House Banks
V_T012
Bank Account
V_T012K
Define Sending Banks
Feature - DTAKT
Check Text Keys for Payment Transactions
V_T520S
General Ledger
Define Employee Grouping Account Determination
Feature - PPMOD
Define Symbolic Accounts
V_T52EK
V_T52EZ
2. Compare and Update Genaral Tables
1 T512W
2 T511K
3 T511P
4 TCURR
5 T030
2a. Compare and Update Additioanl PY-IN Tables
1 T7INTN TAN Number Maintainence
2 T7INA1 Pay scale grouping for allowances
3 T7INA3 Associating pay parameters to pay scale grouping
4 T7INA5 Wage type model for pay scale grouping for allowances
5 T7INA7 Reimbursements Allowances and Perks - base slabs
6 T7INA9 Reimbursement allowances perks - eligibility and calculation
7 T7INAA Salary year for pay scale grouping for allowances
8 T7INB1 Basic Wages
9 T7INB4 Basic Codes
10 T7INB5 Basic Codes for Allowance Groups
11 T7INB7 Basic slabs
12 T7INB8 Appraisal Criteria
13 T7INB9 Increment criteria
14 T7INC1 Car types master
15 T7INC3 Type and age eligibility for car schemes(COCS/OYCS)
16 T7INC5 Perk valuation for cars
17 T7INC7 Amount and number eligibility for car schemes(COCS/OYCS)
18 T7INC9 Conveyance allowance eligibilty
19 T7INCA Codes for Conveyance types
20 T7IND1 Dearness allowance consumer price index master
21 T7IND3 Dearness allowance consumer price index value
22 T7IND5 Dearness allowance basic slab details
23 T7IND7 Dearness allowance calculation rules
24 T7IND9 Dearness allowance consumer price index slabs
25 T7INE1 Personnel area / subarea grouping for employees' state ins.
26 T7INE3 Employees' state insurance contribution rates
27 T7INF1 Trust Master
28 T7INF3 Statutory rates for Provident fund
29 T7INF5 Company rates for Provident Fund
30 T7INF7 Trust details
31 T7ING1 Gratuity Details Maintenance
32 T7ING3 Gratuity ID Maintenance
33 T7ING5 Gratuity ID and Related Wage Types
34 T7INI0 Investment category limits
35 T7INI2 Investment technical description and text
36 T7INI4 Investment details
37 T7INI5 Sub section description
38 T7INI7 Sub section limit
39 T7INI8 Sub division description
40 T7INI9 Sub division details
41 T7INIA Deduction wage type for Sec 88
42 T7INIC Deduction wage type for Sec 80
43 T7INJ1 Section 24 Deduction Details Maintenance
44 T7INJ3 HR-IN: Loans Eligibility checks and limits
45 T7INJ5 HR-IN: Loans Dusbursement Schedule
46 T7INJ6 HR-IN : Loan Tranche Disbursement: Text for Events Code
47 T7INL1 Leave validation for LTA
48 T7INO1 One day salary deduction
49 T7INP1 Professional tax grouping details
50 T7INP3 Method and form layout for states
51 T7INP4 Professional tax slab amounts
52 T7INR1 Housing code for taxation
53 T7INR3 Percentage/amount for housing related constant
54 T7INR5 Housing related statutory constants for taxation
55 T7INR7 Codes for Housing Types
56 T7INR9 City category for housing type
57 T7INS1 Superannuation Details Maintenance
58 T7INS3 Superannuation ID
59 T7INS5 Superannuation-Wagetype Details
60 T7INT1 Slab codes for taxation
61 T7INT3 Taxation slabs
62 T7INT5 Personnel subarea grouping for Tax
63 T7INT7 Tax codes for tax exemptions
64 T7INT9 Taxability of wage types
65 T7INU1 State for Universal Grouping
66 T7INU3 Slab Codes for States
67 T7INU5 Contribution Value for Each Slab
68 T7INW1 Personnel area/subarea grouping for LWF
69 T7INW3 Labour welfare fund rates
70 T7INY1 Recovery of rounding off amounts
71 T7INZ1 Factor for retiral benefits
72 T7INZ3 Period of notice codes
3. Compare Payroll Schemas
1 Compare ECC5- to ECC6 standard schemas
2 Compare ECC5- to ECC6 customised schemas
4. Compare Personnel Calculation Rules (PCR)
1 Compare ECC5- to ECC6 standard PCR's
2 Compare ECC5- to ECC6 customised PCR's
B. Payroll Process
1 Generic Payroll Process
1.1 Simulate Payroll
1.2 Release Payroll
1.3 Start Payroll
1.4 Check result
1.5 Corrections
1.6 Remuneration statement
1.7 Simulate and test FI/CO postings
1.8 Simulate and Test Preliminary DME
1.9 Run Preliminary DME Program
2 Create a live posting run and create FI documents
C. Regression Testing (Variance Monitor)
1 Compare Payroll Results
Create a Excel with these contents and fill them up by saying the percentage of similarity and completetion.
Please let me know if this is usefull
Regards,
Prabha -
Problem regarding offset length while upgrading from 4.7 to ECC 6.0
Hello Friends,
We are upgrading our system from 4.7 to ECC 6.0, during the this I have come across one problem in custom program. Program is not syntactically correct. It's giving error at write statment. WRITE : W_LFA1 +3(1429) to T_FILE. W_LFA1 is having of type LFA1. Error is "The sum of the offset and length (=1432) exceeds the length of the start (=1232) of the structure." Can anyone guide me in this.Hi Chetan,
This should be an unicode error.
Try to replace your write statement by WRITE : W_LFA1 3(1429) to T_FILE and see.
Regards
Sayee -
ISU upgrade from 4.6C to ECC 6.0 (CIC)
Hello there
We are currently going for an upgrade from 4.6C to ECC 6.0
Can anyone of you provide some insight on whether the frontoffice and other configuration in 4.6C have any kind of impact on ECC 6.0? Basically I can see that there are new functionalities in ECC6.0 for CIC . But will the current config lin 4.6C like action box , move in/out processes, owner allocation etc will be impacted after the upgrade?
Thanks
GautamHi Gothic,
We are also planning to upgrade this month from 4.6C to ECC 6.0. It would be very nicce if we can share the information and the experineces.
We will do the upgrade in a pilot system.
We will have a new hardware with windows server 2003 64 bit and oracle oracle 10.2.0.2.0. than we will install oracle and SAP 4.6C and after that we want to export the Database from the production system to the pilot system. after that we upgrade the pilot system to ECC 6.0 to test first.
I do not know if there is an easyer way to do the upgrade or at least the test. Maybe a homogenouse system copy...?
Best regards
Atik -
Copying variants & Layouts from 4.7 to ECC 6.0
Hi All,
Upgrading Client system from 4.7 to ECC 6.0. The 4.7 server would have its own variants and layout for different objects.
How do I copy those variants and layouts to my ECC 6.0 server?
Thanks for your valuable inputs.
RajeshHello prashant,
SPDA_GET_STACK_INFO will check wether all PATCH prerequisites are met or not your ST related level is not up to the required level.
Please check this requirement up the level of STand run it agin.
Thank you,
Shyam -
Information on impact on interfaces due to upgrade from 4.7 to ECC 6.0
Hi friends,
We are upgrading from 4.7 to ECC 6.0. We have some interfaces with the SAP system in our current version.I need information on which of these interfaces will be affected due to Upgrade of the system to ECC 6.0
Mentioned below is the list
SAP R/3 --- CRM 5.0
SAP R/3 --- Xi PAY
SAP R/3 --- Vertex
SAP R/3 --- TEKRF
SAP R/3 --- Virsa
SAP R/3 --- WTX
SAP R/3 --- SOLMAN
It would be really helpful if you can just provide the initial impact analysis for these interfaces due to upgrade.Points will be rewarded.
Thank in advance.
Regards,
Pawan.Hi
there are several oss-notes available which explain how to transfer your text customizing to the new procedure. This happens if you are uppgrading from a release 4.6c or lower. If you are already in 4.7, there should be no problem with text determination.
Regards
Rauno -
Upgrade from 4.7 to ECC 5.0
Hello,
I upgraded my system from R/3 4.7 to ECC 5.0 .
Can anybody tell me how to develop application related to BSP , ITS, Dynpros in abap.
also please provide the difference between 4.7 and ecc 5.0 versions.
Helpfull answers will be rewarded .
Regards,Hi,
Please find below enhancement:-
Ehanced Human Capital Management Functionality
End-to-end talent management tools to improve recruiting,
training, performance evaluation, and retention of employees
Improved employee self-service functionality to reduce administrative
overhead of HR departments
Improved employee expense and travel reporting to reduce
the time and improve control over employee expense
reimbursements
Enhanced Support for New Business Models andOperations
Improved architecture to support outsourcing for payroll and
cash management
New ability to support electronic procurement, invoicing, sales
order management, and documentation of internal controls
for the U.S. Sarbanes-Oxley Act
Enhanced enterprise services repository for system and instance
consolidation and shared-service management
Enhanced Financial Management, Analysis, andReporting Functionality
A newly architected general ledger solution that lessens manual
reconciliations and improves the ability to balance ledgers by
multiple dimensions
Improved management dashboards that provide a complete
picture of business operations and improve decision making
among managers and line-of-business users
New collections and credit management functionality to accelerate
cash collections and improve day-sales-outstanding me
Also visit service.sap.com/upgrade-erp.
Thanks&Regards,
Iqbal -
Interview questions on upgrades from 4.7 to ECC
Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
ThanksHi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact. -
Error during Upgrade from 4.6c to ECC 6.0
Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar KHi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar -
Unicode error while upgrading from 4.6 to ECC 6.0
Dear All,
I am getting unicode errror while upgrading from 4.6 to ECC 6.0, when iam trying to open downloaded file in excel.
In debugging, error occurs while executing statment "CALL METHOD OF obj_ex_sheet " in the code given below:
FORM open_downloaded_file_in_excel *
FORM open_downloaded_file_in_excel.
DATA:
lv_ole_books TYPE ole2_object,
lv_ole_sheets TYPE ole2_object,
lv_subrc LIKE sy-subrc,
lv_title(70) TYPE c,
lv_text1(70) TYPE c,
lv_text2(70) TYPE c.
start excel
CREATE OBJECT obj_ex_sheet 'EXCEL.SHEET'.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
CALL METHOD OF obj_ex_sheet 'Application' = obj_ex_app.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_app.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
SET PROPERTY OF obj_ex_app 'Visible' = 1.
open data file: main file
CALL METHOD OF obj_ex_app 'Workbooks' = lv_ole_books.
CALL METHOD OF lv_ole_books 'Open' = obj_ex_wbook
EXPORTING #1 = gv_filename
#2 = 2
#3 = 0
#4 = 1
#5 = 0
#6 = 0
#7 = 1.
IF sy-subrc NE 0.
lv_subrc = sy-subrc.
FREE OBJECT obj_ex_wbook.
FREE OBJECT obj_ex_app.
FREE OBJECT obj_ex_sheet.
PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
FREE OBJECT lv_ole_books.
CALL METHOD OF obj_ex_wbook 'Worksheets' = lv_ole_sheets.
CALL METHOD OF lv_ole_sheets 'Item' = obj_ex_wsheet
EXPORTING #1 = 1.
FREE OBJECT lv_ole_sheets.
GET PROPERTY OF obj_ex_wsheet 'UsedRange' = obj_ex_usedrange.
CALL METHOD OF obj_ex_usedrange 'AutoFormat'
EXPORTING #1 = 18.
SET PROPERTY OF obj_ex_wsheet 'Name' = sy-tcode.
FREE OBJECT obj_ex_usedrange.
PERFORM free_ole_objects.
CALL FUNCTION 'FLUSH'
EXCEPTIONS
OTHERS = 0.
ENDFORM.
regards,
Divyahi,
In the OPEN DATASET STATEMENT ADD THE ENCODING ADDITION IN TEXT MODE.
Regards,
Balakumar.G
Reward Points if helpful. -
Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)
All,
we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28.
The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown:
Message no. KG346
The variant does not adhere to the current Customizing setup
We have saved the variant again, and no problem are present, but the error message refers also to Customizing setup.
Is there a section in the Customizing where it is possible set up the field to show in the initial screen or the new fields (All Valuation Views, Legal Valuation View and Profit Center Valuation View) are due to the release upgrade?
If yes, do you know the transaction/path?
Thanks in advance for your collaboration.
Regards,
Jody Mancini.Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya -
Asset query execution performance after upgrade from 4.6C to ECC 6.0+EHP4
Hi,guys
I am encounted a weird problems about asset query execution performance after upgrade to ECC 6.0.
Our client had migrated sap system from 4.6c to ECC 6.0. We test all transaction code and related stand report and query.
Everything is working normally except this asset depreciation query report. It is created based on ANLP, ANLZ, ANLA, ANLB, ANLC table; there is also some ABAP code for additional field.
This report execution costed about 6 minutes in 4.6C system; however it will take 25 minutes in ECC 6.0 with same selection parameter.
At first, I am trying to find some difference in table index ,structure between 4.6c and ECC 6.0,but there is no difference about it.
i am wondering why the other query reports is running normally but only this report running with too long time execution dump messages even though we do not make any changes for it.
your reply is very appreciated
Regards
BrianThanks for your replies.
I check these notes, unfortunately it is different our situation.
Our situation is all standard asset report and query (sq01) is running normally except this query report.
I executed se30 for this query (SQ01) at both 4.6C and ECC 6.0.
I find there is some difference in select sequence logic even though same query without any changes.
I list there for your reference.
4.6C
AQA0FI==========S2============
Open Cursor ANLP 38,702 39,329,356 = 39,329,356 34.6 AQA0FI==========S2============ DB Opens
Fetch ANLP 292,177 30,378,351 = 30,378,351 26.7 26.7 AQA0FI==========S2============ DB OpenS
Select Single ANLC 15,012 19,965,172 = 19,965,172 17.5 17.5 AQA0FI==========S2============ DB OpenS
Select Single ANLA 13,721 11,754,305 = 11,754,305 10.3 10.3 AQA0FI==========S2============ DB OpenS
Select Single ANLZ 3,753 3,259,308 = 3,259,308 2.9 2.9 AQA0FI==========S2============ DB OpenS
Select Single ANLB 3,753 3,069,119 = 3,069,119 2.7 2.7 AQA0FI==========S2============ DB OpenS
ECC 6.0
Perform FUNKTION_AUSFUEHREN 2 358,620,931 355
Perform COMMAND_QSUB 1 358,620,062 68
Call Func. RSAQ_SUBMIT_QUERY_REPORT 1 358,569,656 88
Program AQIWFI==========S2============ 2 358,558,488 1,350
Select Single ANLA 160,306 75,576,052 = 75,576,052
Open Cursor ANLP 71,136 42,096,314 = 42,096,314
Select Single ANLC 71,134 38,799,393 = 38,799,393
Select Single ANLB 61,888 26,007,721 = 26,007,721
Select Single ANLZ 61,888 24,072,111 = 24,072,111
Fetch ANLP 234,524 13,510,646 = 13,510,646
Close Cursor ANLP 71,136 2,017,654 = 2,017,654
We can see first open cursor ANLP ,fetch ANLP then select ANLC,ANLA,ANLZ,ANLB at 4.C.
But it changed to first select ANLA,and open cursor ANLP,then select ANLC,ANLB,ANLZ,at last fetch ANLP.
Probably,it is the real reason why it is running long time in ECC 6.0.
Is there any changes for query selcection logic(table join function) in ECC 6.0.
Maybe you are looking for
-
A Tale of Two iPhones and One iTunes
So this little problem has plagued us for years... nearly three to be more precise. We have two iPhones and one PC. Wife syncs contacts with GMail and I sync contacts with Outlook. Funny thing was that the tab for contact sync would not 'stick' wi
-
I'm no longer able to manually arrange my albums
Recently I have "lost" the ability to manually arrange my photo albums in the left-hand list. PReviously, I could grab an album, then drag it to the spot I wanted. iPhoto would idicate whether I was about to drop the album onto another by highlightin
-
Hi SDNers, I have a scenario which picks data from AS400 table using JDBC adapter. My sample SQL query and update query are as follows SQL query : Select * from <table> where <keyfield> = min(keyfield) and flag =""; Update query: Update <table> set f
-
Possible cause for unhandled Win32 exception?
Hi, Using SDK 7.0.5, I'm calling AVDocOpenFromASFileWithParams on an AVDocOpenParamsRec that specifies a sourceDoc. Suppose the sourceDoc has only recently been opened and may still be in the process of loading. Is it possible that this could resul
-
Is it possible to hide Tabs by using Url in FPM_OIF
Hi All. I am calling one Standard Application from my custom application. Standard Application has 8 tabs. There i want to hide some tabs by using URL. Is it possible to hide through url.? Regards, Jack.