Upgrade graphics on T43 with Intel Integrated adapter?

Machine type is 1871-4AU. Can I upgrade the graphics? If not, is there anything like a list somewhere of the upgrades I can do? I would also like to add a dvd burner. I like the machine and have now dumped about a hunded bucks in memory and new keyboard so I figure I might as well upgrade what I can.

To upgrade the graphics you'd have to swap the whole motherboard, not a cost-effective solution.
Fujitsu 120GB hard drives work without giving out a "2010 error". They're available at www.zipzoomfly.com
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

WRT300N Router does not working with Intel 4965AGN adapter on Wireless-N

Hi! I have recently bought the laptop Acer 5920G with Intel 4965AGN network adapter and Windows Vista. I have read that WRT300N Router is supporting Draft-N standard, so I purchased it. The router is working fine on Wireless-G 54Mbps (firmware - 2.00.17), but not on Wireless-N. I tried to enter the following settings: ssid - any non-linksys name; radio band - wide; n-channel - 9; standard channel - 11; beacon interval - 50; Fragmentation threshold - 2306; RTS threshold - 2307, but nothing has happened, connection still remains 54Mbps. How should I configure the router and network adapter to get Wireless-N?

okay... try reflashing/upgrading the firmware on the router, after reflashing the firmware on the router, reset it back to default settings and reconfigure it according to ISP settings...edit the wireless settings again, make sure that "wireless mode" should be mixed...
on the vista computer, click on start >> control panel >> network & sharing center >> manage wireless network and try removing existing wireless networks from profile and manually add wireless n/w profile according to wireless settings of the router...check whether it makes any difference or not and let me know.

[SOLVED] Authentication with AP on 3.6.* with Intel Wireless adapter

Edit 06/2014: Solved ages ago via 3.10+
Kernels tested: 3.6.2-1, 3.6.3-1, 3.6.4-1.
After the latest kernel upgrade my wireless can't authenticate with my AP, wicd-gtk hangs on "authenticating" and then says "bad password".
lspci -vnn | grep -i net
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] [8086:0083]
A snip from /var/log/messages showing errors at boot. The last messages just repeat continuously.
Oct 16 14:52:44 localhost kernel: [ 9.337732] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 3513
8
Oct 16 14:52:44 localhost kernel: [ 10.079892] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Oct 16 14:52:44 localhost kernel: [ 10.079898] iwldvm: Copyright(c) 2003-2012 Intel Corporation
Oct 16 14:52:44 localhost kernel: [ 10.079930] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
Oct 16 14:52:44 localhost kernel: [ 10.079933] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
Oct 16 14:52:44 localhost kernel: [ 10.079935] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
Oct 16 14:52:44 localhost kernel: [ 10.079937] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
Oct 16 14:52:44 localhost kernel: [ 10.079938] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
Oct 16 14:52:44 localhost kernel: [ 10.079941] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 100
0 BGN, REV=0x6C
Oct 16 14:52:44 localhost kernel: [ 10.080008] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 10.087424] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
Oct 16 14:52:44 localhost kernel: [ 10.100826] iwlwifi 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
Oct 16 14:52:44 localhost kernel: [ 10.100828] iwlwifi 0000:02:00.0: Device SKU: 0x50
Oct 16 14:52:44 localhost kernel: [ 10.100830] iwlwifi 0000:02:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
Oct 16 14:52:44 localhost kernel: [ 15.821575] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 15.829048] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:44 localhost kernel: [ 15.879478] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:44 localhost kernel: [ 15.886902] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:44 localhost acpid: starting up with netlink and the input layer
Oct 16 14:52:44 localhost acpid: 4 rules loaded
Oct 16 14:52:44 localhost acpid: waiting for events: event logging is off
Oct 16 14:52:53 localhost kernel: [ 25.219799] jme 0000:04:00.5: eth0: Link is down
Oct 16 14:52:53 localhost acpid: client connected from 600[0:10]
Oct 16 14:52:53 localhost acpid: 1 client rule loaded
Oct 16 14:52:56 localhost kernel: [ 28.035738] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:56 localhost kernel: [ 28.043276] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:56 localhost kernel: [ 28.268085] jme 0000:04:00.5: eth0: Link is down
Oct 16 14:52:56 localhost kernel: [ 28.309378] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:52:56 localhost kernel: [ 28.316816] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:52:59 localhost kernel: [ 31.543667] wlan0: authenticate with 84:c9:b2:b8:cb:f0
Oct 16 14:53:01 localhost kernel: [ 33.551368] wlan0: failed to insert STA entry for the AP (error -5)
Oct 16 14:53:01 localhost kernel: [ 33.551710] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:01 localhost kernel: [ 33.551758] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:01 localhost kernel: [ 33.559158] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:03 localhost kernel: [ 35.603895] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:03 localhost kernel: [ 35.603953] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:03 localhost kernel: [ 35.611394] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:05 localhost kernel: [ 37.656025] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:05 localhost kernel: [ 37.656093] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:06 localhost kernel: [ 37.663560] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:08 localhost kernel: [ 39.708223] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:08 localhost kernel: [ 39.708277] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:08 localhost kernel: [ 39.715713] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:10 localhost kernel: [ 41.760384] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:10 localhost kernel: [ 41.760415] ------------[ cut here ]------------
Oct 16 14:53:10 localhost kernel: [ 41.760424] WARNING: at drivers/net/wireless/iwlwifi/dvm/../iwl-trans.h:607 iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]()
Oct 16 14:53:10 localhost kernel: [ 41.760425] Hardware name: K52F
Oct 16 14:53:10 localhost kernel: [ 41.760432] iwl_trans_wait_tx_queue_empty bad state = 0
Oct 16 14:53:10 localhost kernel: [ 41.760435] Modules linked in: reiserfs arc4 iwldvm mac80211 uvcvideo jme iwlwifi videobuf2_vmalloc videobuf2_memops videobuf2_core videodev joydev snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec acpi_cpufreq snd_pcm snd_page_alloc snd_hwdep snd_timer snd jmb38x_ms serio_raw media sdhci_pci asus_laptop iTCO_wdt iTCO_vendor_support cfg80211 mperf sdhci mei intel_ips lpc_ich mmc_core i2c_i801 mii soundcore microcode kvm_intel psmouse memstick input_polldev evdev processor kvm ac thermal battery sparse_keymap coretemp crc32c_intel rfkill tun loop ext4 crc16 jbd2 mbcache sr_mod sd_mod cdrom ahci libahci libata scsi_mod ehci_hcd usbcore usb_common i915 video button i2c_algo_bit intel_agp intel_gtt drm_kms_helper drm agpgart i2c_core
Oct 16 14:53:10 localhost kernel: [ 41.760539] Pid: 658, comm: wpa_supplicant Not tainted 3.6.2-1-ARCH #1
Oct 16 14:53:10 localhost kernel: [ 41.760542] Call Trace:
Oct 16 14:53:10 localhost kernel: [ 41.760554] [<c0139f22>] warn_slowpath_common+0x72/0xa0
Oct 16 14:53:10 localhost kernel: [ 41.760565] [<fa8e4922>] ? iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760574] [<fa8e4922>] ? iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760579] [<c0139ff3>] warn_slowpath_fmt+0x33/0x40
Oct 16 14:53:10 localhost kernel: [ 41.760588] [<fa8e4922>] iwlagn_mac_flush+0x1c2/0x1e0 [iwldvm]
Oct 16 14:53:10 localhost kernel: [ 41.760608] [<fa840803>] __ieee80211_recalc_idle+0x1f3/0x2d0 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760626] [<fa84112a>] ieee80211_recalc_idle+0x2a/0x50 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760642] [<fa83942e>] __ieee80211_start_scan+0xfe/0x510 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760659] [<fa83a37e>] ieee80211_request_scan+0x2e/0x50 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760677] [<fa846f29>] ieee80211_scan+0x69/0x80 [mac80211]
Oct 16 14:53:10 localhost kernel: [ 41.760693] [<f9864178>] cfg80211_wext_siwscan+0x248/0x2e0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760700] [<c02294ed>] ? __kmalloc+0x12d/0x160
Oct 16 14:53:10 localhost kernel: [ 41.760713] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760722] [<c04ad214>] ioctl_standard_call+0x2d4/0x3c0
Oct 16 14:53:10 localhost kernel: [ 41.760729] [<c04d0fc3>] ? schedule+0x23/0x60
Oct 16 14:53:10 localhost kernel: [ 41.760741] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760748] [<c04ad4fd>] wext_handle_ioctl+0x1fd/0x230
Oct 16 14:53:10 localhost kernel: [ 41.760760] [<f9863f30>] ? cfg80211_find_vendor_ie+0xc0/0xc0 [cfg80211]
Oct 16 14:53:10 localhost kernel: [ 41.760768] [<c03f8cc3>] dev_ioctl+0xb3/0x4e0
Oct 16 14:53:10 localhost kernel: [ 41.760776] [<c03e3f4d>] ? sys_sendto+0xfd/0x140
Oct 16 14:53:10 localhost kernel: [ 41.760784] [<c03e2025>] sock_ioctl+0x85/0x260
Oct 16 14:53:10 localhost kernel: [ 41.760790] [<c03e1fa0>] ? sock_fasync+0x90/0x90
Oct 16 14:53:10 localhost kernel: [ 41.760796] [<c0243eca>] do_vfs_ioctl+0x7a/0x570
Oct 16 14:53:10 localhost kernel: [ 41.760804] [<c02f70e1>] ? copy_to_user+0x31/0x50
Oct 16 14:53:10 localhost kernel: [ 41.760813] [<c01855b7>] ? getnstimeofday+0x47/0x130
Oct 16 14:53:10 localhost kernel: [ 41.760819] [<c0244428>] sys_ioctl+0x68/0x80
Oct 16 14:53:10 localhost kernel: [ 41.760826] [<c04d7e1f>] sysenter_do_call+0x12/0x28
Oct 16 14:53:10 localhost kernel: [ 41.760830] ---[ end trace 004dc83771a21a26 ]---
Oct 16 14:53:10 localhost kernel: [ 41.760841] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
Oct 16 14:53:10 localhost kernel: [ 41.760938] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:10 localhost kernel: [ 41.768376] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:12 localhost kernel: [ 43.825863] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:12 localhost kernel: [ 43.825917] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:12 localhost kernel: [ 43.833397] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:14 localhost kernel: [ 45.881485] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:14 localhost kernel: [ 45.881488] iwlwifi 0000:02:00.0: Request scan called when driver not ready.
Oct 16 14:53:14 localhost kernel: [ 45.881593] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
Oct 16 14:53:14 localhost kernel: [ 45.889068] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
Oct 16 14:53:16 localhost kernel: [ 47.940286] ieee80211 phy0: Hardware restart was requested
Oct 16 14:53:16 localhost kernel: [ 47.940344] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
dmesg output (this repeats also)
[ 81.793548] iwlwifi 0000:02:00.0: Loaded firmware version: 39.31.5.1 build 35138
[ 81.796181] iwlwifi 0000:02:00.0: Start IWL Error Log Dump:
[ 81.798709] iwlwifi 0000:02:00.0: Status: 0x0000204C, count: 5
[ 81.801253] iwlwifi 0000:02:00.0: 0x00000005 | SYSASSERT
[ 81.803780] iwlwifi 0000:02:00.0: 0x0001E404 | uPc
[ 81.806261] iwlwifi 0000:02:00.0: 0x0001E3E8 | branchlink1
[ 81.808719] iwlwifi 0000:02:00.0: 0x0001E3E8 | branchlink2
[ 81.811080] iwlwifi 0000:02:00.0: 0x00000826 | interruptlink1
[ 81.813361] iwlwifi 0000:02:00.0: 0x00000000 | interruptlink2
[ 81.815543] iwlwifi 0000:02:00.0: 0x0000020D | data1
[ 81.817643] iwlwifi 0000:02:00.0: 0x00000009 | data2
[ 81.819695] iwlwifi 0000:02:00.0: 0x0000020D | line
[ 81.821702] iwlwifi 0000:02:00.0: 0x000186E0 | beacon time
[ 81.823683] iwlwifi 0000:02:00.0: 0x00000920 | tsf low
[ 81.825611] iwlwifi 0000:02:00.0: 0x00000000 | tsf hi
[ 81.827480] iwlwifi 0000:02:00.0: 0x00000000 | time gp1
[ 81.829333] iwlwifi 0000:02:00.0: 0x0000BE04 | time gp2
[ 81.831170] iwlwifi 0000:02:00.0: 0x00000000 | time gp3
[ 81.833008] iwlwifi 0000:02:00.0: 0x0001271F | uCode version
[ 81.834856] iwlwifi 0000:02:00.0: 0x0000006C | hw version
[ 81.836706] iwlwifi 0000:02:00.0: 0x00C8330C | board version
[ 81.838560] iwlwifi 0000:02:00.0: 0x04150010 | hcmd
[ 81.840401] iwlwifi 0000:02:00.0: 0x00022080 | isr0
[ 81.842231] iwlwifi 0000:02:00.0: 0x00000000 | isr1
[ 81.844048] iwlwifi 0000:02:00.0: 0x00000002 | isr2
[ 81.845845] iwlwifi 0000:02:00.0: 0x0040D440 | isr3
[ 81.847639] iwlwifi 0000:02:00.0: 0x00200080 | isr4
[ 81.849426] iwlwifi 0000:02:00.0: 0x01000002 | isr_pref
[ 81.851216] iwlwifi 0000:02:00.0: 0x000114DA | wait_event
[ 81.853015] iwlwifi 0000:02:00.0: 0x00000000 | l2p_control
[ 81.854816] iwlwifi 0000:02:00.0: 0x00000000 | l2p_duration
[ 81.856637] iwlwifi 0000:02:00.0: 0x00000000 | l2p_mhvalid
[ 81.858438] iwlwifi 0000:02:00.0: 0x00000000 | l2p_addr_match
[ 81.860230] iwlwifi 0000:02:00.0: 0x00000005 | lmpm_pmg_sel
[ 81.862012] iwlwifi 0000:02:00.0: 0x10021644 | timestamp
[ 81.863786] iwlwifi 0000:02:00.0: 0x00001020 | flow_handler
[ 81.865622] iwlwifi 0000:02:00.0: Start IWL Event Log Dump: display last 20 entries
[ 81.867473] iwlwifi 0000:02:00.0: EVT_LOGT:0000047246:0x0000000f:0484
[ 81.869314] iwlwifi 0000:02:00.0: EVT_LOGT:0000047256:0x00000010:0484
[ 81.871100] iwlwifi 0000:02:00.0: EVT_LOGT:0000047269:0x00000015:0484
[ 81.872853] iwlwifi 0000:02:00.0: EVT_LOGT:0000047280:0x00000016:0484
[ 81.874572] iwlwifi 0000:02:00.0: EVT_LOGT:0000047290:0x00000017:0484
[ 81.876261] iwlwifi 0000:02:00.0: EVT_LOGT:0000047301:0x00000018:0484
[ 81.877917] iwlwifi 0000:02:00.0: EVT_LOGT:0000047306:0x00000019:0484
[ 81.879530] iwlwifi 0000:02:00.0: EVT_LOGT:0000047312:0x000001c9:1108
[ 81.881116] iwlwifi 0000:02:00.0: EVT_LOGT:0000047313:0x00000024:1108
[ 81.882667] iwlwifi 0000:02:00.0: EVT_LOGT:0000047313:0x00000001:1108
[ 81.884192] iwlwifi 0000:02:00.0: EVT_LOGT:0000047314:0x00000033:1108
[ 81.885679] iwlwifi 0000:02:00.0: EVT_LOGT:0000047319:0x0002000d:0464
[ 81.887129] iwlwifi 0000:02:00.0: EVT_LOGT:0000047320:0x0000000d:0462
[ 81.888553] iwlwifi 0000:02:00.0: EVT_LOGT:0000047339:0x00002806:1062
[ 81.889959] iwlwifi 0000:02:00.0: EVT_LOGT:0000047343:0x02020202:1074
[ 81.891368] iwlwifi 0000:02:00.0: EVT_LOGT:0000048434:0x00000325:1074
[ 81.892767] iwlwifi 0000:02:00.0: EVT_LOGT:0000048483:0x000001a4:0602
[ 81.894182] iwlwifi 0000:02:00.0: EVT_LOGT:0000048638:0x04150010:0401
[ 81.895595] iwlwifi 0000:02:00.0: EVT_LOGT:0000048640:0x0000000d:0451
[ 81.897017] iwlwifi 0000:02:00.0: EVT_LOGT:0000048646:0x00000000:0125
[ 83.703038] iwlwifi 0000:02:00.0: Error sending REPLY_RXON: time out after 2000ms.
[ 83.704232] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 21 write_ptr 22
[ 83.705636] iwlwifi 0000:02:00.0: Error clearing ASSOC_MSK on BSS (-110)
[ 83.707703] ieee80211 phy0: Hardware restart was requested
[ 83.707758] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 83.715263] iwlwifi 0000:02:00.0: Radio type=0x0-0x0-0x3
[ 83.779279] iwlwifi 0000:02:00.0: Microcode SW error detected. Restarting 0x2000000.
[ 83.780573] iwlwifi 0000:02:00.0: CSR values:
[ 83.782128] iwlwifi 0000:02:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
[ 83.783982] iwlwifi 0000:02:00.0: CSR_HW_IF_CONFIG_REG: 0X00c8330c
[ 83.785851] iwlwifi 0000:02:00.0: CSR_INT_COALESCING: 0X00000040
[ 83.787730] iwlwifi 0000:02:00.0: CSR_INT: 0X00000000
[ 83.789610] iwlwifi 0000:02:00.0: CSR_INT_MASK: 0X00000000
[ 83.791486] iwlwifi 0000:02:00.0: CSR_FH_INT_STATUS: 0X00000000
[ 83.793353] iwlwifi 0000:02:00.0: CSR_GPIO_IN: 0X00000000
[ 83.795234] iwlwifi 0000:02:00.0: CSR_RESET: 0X00000000
[ 83.797121] iwlwifi 0000:02:00.0: CSR_GP_CNTRL: 0X080403c5
[ 83.799023] iwlwifi 0000:02:00.0: CSR_HW_REV: 0X0000006c
[ 83.800936] iwlwifi 0000:02:00.0: CSR_EEPROM_REG: 0X00001885
[ 83.802860] iwlwifi 0000:02:00.0: CSR_EEPROM_GP: 0X90000001
[ 83.804785] iwlwifi 0000:02:00.0: CSR_OTP_GP_REG: 0X00010001
[ 83.806720] iwlwifi 0000:02:00.0: CSR_GIO_REG: 0X00080044
[ 83.808653] iwlwifi 0000:02:00.0: CSR_GP_UCODE_REG: 0X00000010
[ 83.810592] iwlwifi 0000:02:00.0: CSR_GP_DRIVER_REG: 0X00000000
[ 83.812535] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP1: 0X00000000
[ 83.814490] iwlwifi 0000:02:00.0: CSR_UCODE_DRV_GP2: 0X00000000
[ 83.816425] iwlwifi 0000:02:00.0: CSR_LED_REG: 0X00000078
[ 83.818360] iwlwifi 0000:02:00.0: CSR_DRAM_INT_TBL_REG: 0X88032ccf
[ 83.820300] iwlwifi 0000:02:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200
[ 83.822206] iwlwifi 0000:02:00.0: CSR_ANA_PLL_CFG: 0X00880300
[ 83.824092] iwlwifi 0000:02:00.0: CSR_HW_REV_WA_REG: 0X0001001a
[ 83.825997] iwlwifi 0000:02:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0000
[ 83.827923] iwlwifi 0000:02:00.0: FH register values:
[ 83.829885] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X032d5a00
[ 83.831941] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X0032dbd0
[ 83.834023] iwlwifi 0000:02:00.0: FH_RSCSR_CHNL0_WPTR: 0X00000010
[ 83.836138] iwlwifi 0000:02:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80811104
[ 83.838284] iwlwifi 0000:02:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
[ 83.840464] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
[ 83.842674] iwlwifi 0000:02:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
[ 83.844919] iwlwifi 0000:02:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001
[ 83.847190] iwlwifi 0000:02:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000
Any ideas?
Edit: changed thread title
Last edited by Minsc (2014-06-19 01:06:15)

d41f3a76dbc185paulinchenk wrote:
Not for me :-(
I have an Intel(R) Centrino(R) Advanced-N 6205 AGN and the only way get it connecting to my WPA2-AES network was downgrading to linux 3.5. But because I have optimus graphics, this means I can no longer use bumblebee, as it depends on 3.6.
Anyone got a hint for a workaround to get both working?
Thanks
Does the 11n_disable workaround work for you?
Just upgraded to 3.6.5, I still have the problem on Centrino Wireless 100 N, with some differences: now it seems to authenticate but with very low speeds and the connection isn't stable. I haven't found out much more, I'll try to get more information during the week. Right now I still use the 11n disabled.
Last edited by pulce (2012-11-04 18:06:38)

[UNSOLVED] Graphics Card Issues with Intel 945GSE

I have several issues and im not sure if they are related to the same reason. But I think it all has to do with my graphics card not being detected right.
I have a Samsung N310 with 1,6 Ghz and 2Gb RAM and am using Gnome. If i go to "System settings --> System information" it shows me "Graphics: unknown".
Since my new installation i dont have an xorg.conf anymore, and i did not experience any disadvantages yet, but before my graphics card was detected as following in the xorg.conf:
"Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)"
In the Gnome System information it was not listed though, like now.
This is not really a problem, but it made me think that my other issues could be related to the card being not detected right.
Here are my real problems:
When i am watching a video on my external monitor i have slight lags, which are really annoying to me,
because im a big fan of a good picture!
It is explicitly visible during pan shots or when cars a moving from the one side of the picture to the other.
And the larger the file is, the worse it gets... The lag with dvds or large mkv-files is even worse and not watchable anymore!
My machine should be capable of running a film on fullscreen on an external monitor though, at least it does under XP on the same screen. Flawlessly!! And since arch is a minimal system, it should work! I am experiencing these problems with gnome2 and xfce as well, so it cant be related to gnome3!
Im also experiencing lags with the Gnome shell, for example when i move my mouse to the activities button in the upper-left corner or when i am moving windows with the mouse.
And last but not least firefox is very laggy while scrolling. But since even users with faster machines experience slight problems of that matter with firefox, i dont think that this problem is related to my card.
I could stand the issues with the Gnome shell and firefox, but i at least want to be able to watch a film with my computer!
I hope that my computer isnt simply to slow...
Greets
Last edited by gunjah292 (2011-12-21 20:09:44)

gunjah292 wrote:
HAHA!! The trick was not to enable VSync but to disable it!
I just changed the SwapBuffersWait Option to "false".
I have around 300 FPS now and my video lag problem is GONE!!! Thanks for the tips! I will mark this solved now!
Well, that's a surprise for me. I had to enable VSync to stop video tearing with my Intel HD 3000 GPU (Sandy Bridge).
From the Intel xorg driver man page:
Option "SwapbuffersWait" "boolean"
This option controls the behavior of glXSwapBuffers and glXCopySubBufferMESA calls by GL
applications. If enabled, the calls will avoid tearing by making sure the display scanline is
outside of the area to be copied before the copy occurs. If disabled, no scanline
synchronization is performed, meaning tearing will likely occur. Note that when enabled, this
option can adversely affect the framerate of applications that render frames at less than
refresh rate.
Default: enabled.
Glad you got it sorted!
Last edited by David Batson (2011-12-14 23:21:57)

Upgrade my DV6-6126sl with an Wireless adapter Bluetooth

Hi,
I open a new topic, because searching among existing ones, I did not find useful answers.
I have a DV6-6126sl and I decided to upgrade it with a wireless card that implements the Bluetooth. analyzing the service and maintenance guide, I chose to buy the part number 657325-001, which should be compatible with both AMD and those models intel, but when I insert the card at startup hangs and does not post bios, giving an error "wireless adapter installed is not supported and then has the error" wireless (702) "," how is it possible? there is a method to unlock it, thanks
Knowledge is power, sharing knowledge is powerful!
HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

Today, the seller has sent to me an email that says: "I have the Ralink RT3090BC4 802.11b/g/n 1 × 1 WiFi and Bluetooth 2.1 + EDR Combo Adapter 630705-001".
According to you, since the manual is listed as "For use on all computer models:" can I try?
Knowledge is power, sharing knowledge is powerful!
HP DV6-6126sl:AMD A8-3510MX, 16Gb (2x8Gb) DDR3 1600 Corsair Vengeance, SSD Samsung 840 pro 256Gb + ST950042 0AS 500Gb 7200rpm, AMD Radeon HD 6755G2 1Gb DDR5

I am looking to update to a new imac with intel core processor. I am still old school with a powerbook G4. I want to know if I am going to have to upgrade all graphic programs right away after buying new computer. Thanks.

I am looking to update to a new imac with intel core processor. I am still old school with a powerbook G4:)
I want to know if I am going to have to upgrade all graphic programs right away after buying new computer.
Trying to weigh ALL costs involved.
Thanks for any advice!!!

Anything you have that is powerpc code only will not run on a new machine. OS X 10.8 has no support for powerpc code (universal binary programs should be fine).
Other than that warning, without knowing exactly what programs you have, and what version you are on, it is hard to say whay will or will not migrate alright.
you might need to do some web searching and check apps at sites like roaringapps or on the programs Company web site.
http://roaringapps.com/apps:table

KDE4 compositing no longer works with Intel graphics card

I recently upgraded to the new intel graphics card drivers and when I started KDE4, I got a black screen. I disabled compositing through the kwinrc file, but I want it back! Here's my xorg.conf
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "true"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "intel"
# Driver "vesa"
VendorName "All"
BoardName "All"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
and my Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH x86_64
Current Operating System: Linux michael-laptop 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:44:59 CET 2008 x86_64
Build Date: 26 January 2008 09:52:13AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 12 11:23:12 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(==) |-->Input Device "<default pointer>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b0560
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 14c0,0026 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,2a02 card 14c0,0026 rev 0c class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,2a03 card 14c0,0026 rev 0c class 03,80,00 hdr 80
(II) PCI: 00:1a:0: chip 8086,2834 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 14c0,0026 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 14c0,0026 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2843 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,2845 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:5: chip 8086,2849 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 14c0,0026 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 14c0,0026 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 14c0,0026 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2815 card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 14c0,0026 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 14c0,0026 rev 03 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,283e card 14c0,0026 rev 03 class 0c,05,00 hdr 00
(II) PCI: 04:00:0: chip 14e4,1713 card 14c0,0026 rev 02 class 02,00,00 hdr 00
(II) PCI: 0c:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: 0e:06:0: chip 1180,0832 card 14c0,0026 rev 05 class 0c,00,10 hdr 80
(II) PCI: 0e:06:1: chip 1180,0822 card 14c0,0026 rev 22 class 08,05,00 hdr 80
(II) PCI: 0e:06:2: chip 1180,0592 card 14c0,0026 rev 12 class 08,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,14), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xc0000000 - 0xc3ffffff (0x4000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xcc000000 - 0xcdffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfbffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:28:2), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xf4000000 - 0xf7ffffff (0x4000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:3), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x00005000 - 0x000050ff (0x100) IX[b]
[1] -1 0 0x00005400 - 0x000054ff (0x100) IX[b]
[2] -1 0 0x00005800 - 0x000058ff (0x100) IX[b]
[3] -1 0 0x00005c00 - 0x00005cff (0x100) IX[b]
(II) Bus 8 non-prefetchable memory range:
[0] -1 0 0xb8000000 - 0xbbffffff (0x4000000) MX[b]
(II) Bus 8 prefetchable memory range:
[0] -1 0 0xc8000000 - 0xc9ffffff (0x2000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:28:4), (0,10,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 12: bridge is at (0:28:5), (0,12,12), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 12 non-prefetchable memory range:
[0] -1 0 0xf8200000 - 0xf82fffff (0x100000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 14: bridge is at (0:30:0), (0,14,14), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 14 non-prefetchable memory range:
[0] -1 0 0xf8300000 - 0xf83fffff (0x100000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8000000/20, 0xd0000000/28, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/20
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[1] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[2] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[3] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[4] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[5] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[6] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[7] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[8] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[9] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[10] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[13] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[14] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[15] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[16] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[17] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[18] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[19] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specifiedin the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified inthe config file.
(II) "glx" will be loaded. This was enabled by default and also specified inthe config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specifiedin the config file.
(II) "dri" will be loaded. This was enabled by default and also specified inthe config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 965GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[20] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[21] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[22] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[23] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[24] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[25] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[30] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[31] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[32] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[33] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[34] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[35] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[5] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[6] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[7] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[8] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[9] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[10] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[11] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[12] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[13] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[14] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[16] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[23] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[24] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[25] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[26] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[27] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[28] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[33] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[34] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[35] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[36] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[37] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[38] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF8000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7616 kB
(II) intel(0): VESA VBE OEM: Intel(r)Crestline Graphics Chip Accelerated VGABIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)Crestline Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing on
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[b]
[1] 0 0 0xf8000000 - 0xf80fffff (0x100000) MS[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xf8300c00 - 0xf8300cff (0x100) MX[b]
[7] -1 0 0xf8300800 - 0xf83008ff (0x100) MX[b]
[8] -1 0 0xf8300000 - 0xf83007ff (0x800) MX[b]
[9] -1 0 0xf8200000 - 0xf8201fff (0x2000) MX[b]
[10] -1 0 0xf0000000 - 0xf000ffff (0x10000) MX[b]
[11] -1 0 0x50000000 - 0x500000ff (0x100) MX[b]
[12] -1 0 0xf8604000 - 0xf86047ff (0x800) MX[b]
[13] -1 0 0xf8604c00 - 0xf8604fff (0x400) MX[b]
[14] -1 0 0xf8400000 - 0xf8403fff (0x4000) MX[b]
[15] -1 0 0xf8604800 - 0xf8604bff (0x400) MX[b]
[16] -1 0 0xf8100000 - 0xf81fffff (0x100000) MX[b](B)
[17] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[18] -1 0 0xf8000000 - 0xf80fffff (0x100000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[22] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x00001c20 - 0x00001c3f (0x20) IX[b]
[26] -1 0 0x000018e0 - 0x000018ff (0x20) IX[b]
[27] -1 0 0x000018d0 - 0x000018d3 (0x4) IX[b]
[28] -1 0 0x000018d8 - 0x000018df (0x8) IX[b]
[29] -1 0 0x000018d4 - 0x000018d7 (0x4) IX[b]
[30] -1 0 0x00001c00 - 0x00001c07 (0x8) IX[b]
[31] -1 0 0x00001810 - 0x0000181f (0x10) IX[b]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[34] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[35] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[36] -1 0 0x000018a0 - 0x000018bf (0x20) IX[b]
[37] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[38] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[39] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[40] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[41] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[43] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(==) intel(0): VideoRam: 262144 KB
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Success.
(II) intel(0): [drm] Registers = 0xf8000000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
(II) intel(0): [drm] mapped back buffer at 0xd1a00000, handle = 0xd1a00000
(II) intel(0): [drm] mapped depth buffer at 0xd2040000, handle = 0xd2040000
(II) intel(0): [drm] mapped classic textures at 0xd2680000, handle = 0xd2680000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xd0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
(II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
(II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
(II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1304 1336 1408 800 801804 813 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "CPT", prod id 5141
(II) 3rd Button detected: disabling emulate3Button
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB)
(II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
(II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
(II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0x2fff9000
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
Last edited by miggols99 (2008-02-12 14:50:38)

Maybe it is this bug: http://bugs.kde.org/show_bug.cgi?id=154969
The decisive effect is 'Improved window management' - if this effect is enabled kwin works normally.
Last edited by May-C (2008-02-13 01:16:48)

Repeated error from Intel integrated Graphics card in my brand-new B320

Hi
I am getting repeated errors from the Intel Integrated Graphics card (on the Intel i3 chip as I understand it) in my brand-new B320.
I checked via a tool from Intel that my drivers were up-to-date (version 15.22.1.2361).
I checked via Device Manager Update Drivers that my driver was up-to-date.
I attempted to uninstall and re-install my driver BUT the uninstall reverted me to a VGA Adapter (so my screen was then running in a low res 800x600 mode!) and I could not even then see the Intel Integrated Graphics card in Device Manager to be able to re-install the driver against (even if I ran scan for new hardware): I had to restore to a System Restore Point - so the problem has of course come back.
I have even had one error where the screen then went completely blank and nothing would bring it back: I had to power off the PC (Ouch!)
PLEASE advise how I rectify this incredibly frustrating problem step-by-step.

hey johnestlea,
i was going through the download list of the B320 here : http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=156819
And could not find any driver with the version 15.22.1.2361 for the Intel Integrated Graphic Card. Where did you get that version ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Dual monitor for M Series ThinkCentre with Intel hd graphics + i5 650 processor?

I have a M Series (My guess it is M90) ThinkCentre desktop with Intel hd graphics + i5 650 processor (detailed info in pictures below), one vga port on the central unit, I would like to upgrade dual monitors to extend desk.
I checked online, someone said a Intel hd graphics doesn't support dual monitor, but some said yes. My questions are:
1, could I upgrade to dual monitors with the Intel hd Graphics+i5 650 processor instead of upgrading a ATI video card?
2, if 1 is yes, can I attach a vga 15-pin splitter to connect dual monitors? Thanks.
Solved!
Go to Solution.

That model does support 2 monitors, the 2nd using the DisplayPort (DP.) Not many monitors support DP as yet, if needed, a DP to DVI, HDMI or VGA can be bought.   Lenovo sells them, or I also recommend an AMD approved adapter :
http://support.amd.com/en-us/recommended/eyefinity-adapters
you need a single-link (if DVI), passive adapter.   And not mini-DP.
Search on "M90, monitor" in the search engine above right for more information.

Xf86-video-intel not not working with intel 82852/855GM graphics card

I am runing arch linux on a toshiba satilite r15 s829 and have the xf86-video-intel driver installed but Xorg does mot seem to be able to use it with my intel graphics card.
output of lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
01:0b.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
01:0b.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
01:0b.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
xorg onfig file: 10-monitor.conf
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
#Option "RandRRotation" "true"
VendorName "Intel Corp."
BoardName "82852/855GM Integrated Graphics Device"
EndSection
Section "Screen"
Identifier "Screen0" #Collapse Monitor and Device section to Screen section
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24 #Choose the depth (16||24)
#Option "RandRRotation" "true"
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Xorg log file: Xorg.0.log
[ 2900.308]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 2900.308] X Protocol Version 11, Revision 0
[ 2900.308] Build Operating System: Linux 2.6.37-ARCH i686
[ 2900.308] Current Operating System: Linux dragonL 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 25 09:07:57 UTC 2011 i686
[ 2900.309] Kernel command line: BOOT_IMAGE=(hd0,msdos1)//boot/vmlinuz26 root=/dev/disk/by-uuid/0cfdcd8b-eae7-4dbd-8dd6-0ff955089587 rootfstype=ext2 ro nomodeset add_efi_memmap
[ 2900.309] Build Date: 04 February 2011 09:39:45PM
[ 2900.309]
[ 2900.309] Current version of pixman: 0.20.2
[ 2900.309] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2900.309] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2900.310] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 25 12:15:42 2011
[ 2900.310] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2900.310] (==) No Layout section. Using the first Screen section.
[ 2900.310] (**) |-->Screen "Screen0" (0)
[ 2900.310] (**) | |-->Monitor "Monitor0"
[ 2900.311] (**) | |-->Device "Card0"
[ 2900.311] (==) Automatically adding devices
[ 2900.311] (==) Automatically enabling devices
[ 2900.311] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2900.311] Entry deleted from font path.
[ 2900.311] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2900.311] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2900.311] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2900.311] (II) Loader magic: 0x81f3040
[ 2900.311] (II) Module ABI versions:
[ 2900.311] X.Org ANSI C Emulation: 0.4
[ 2900.311] X.Org Video Driver: 8.0
[ 2900.311] X.Org XInput driver : 11.0
[ 2900.311] X.Org Server Extension : 4.0
[ 2900.312] (--) PCI:*(0:0:2:0) 8086:3582:1179:0037 rev 2, Mem @ 0xd8000000/134217728, 0xd0000000/524288, I/O @ 0x0000eff8/8
[ 2900.312] (--) PCI: (0:0:2:1) 8086:3582:1179:0037 rev 2, Mem @ 0x40000000/134217728, 0x4c000000/524288
[ 2900.312] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2900.312] (II) LoadModule: "extmod"
[ 2900.312] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2900.312] (II) Module extmod: vendor="X.Org Foundation"
[ 2900.312] compiled for 1.9.4, module version = 1.0.0
[ 2900.312] Module class: X.Org Server Extension
[ 2900.312] ABI class: X.Org Server Extension, version 4.0
[ 2900.312] (II) Loading extension MIT-SCREEN-SAVER
[ 2900.312] (II) Loading extension XFree86-VidModeExtension
[ 2900.312] (II) Loading extension XFree86-DGA
[ 2900.312] (II) Loading extension DPMS
[ 2900.312] (II) Loading extension XVideo
[ 2900.312] (II) Loading extension XVideo-MotionCompensation
[ 2900.312] (II) Loading extension X-Resource
[ 2900.312] (II) LoadModule: "dbe"
[ 2900.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2900.313] (II) Module dbe: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.0.0
[ 2900.313] Module class: X.Org Server Extension
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (II) Loading extension DOUBLE-BUFFER
[ 2900.313] (II) LoadModule: "glx"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2900.313] (II) Module glx: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.0.0
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (==) AIGLX enabled
[ 2900.313] (II) Loading extension GLX
[ 2900.313] (II) LoadModule: "record"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2900.313] (II) Module record: vendor="X.Org Foundation"
[ 2900.313] compiled for 1.9.4, module version = 1.13.0
[ 2900.313] Module class: X.Org Server Extension
[ 2900.313] ABI class: X.Org Server Extension, version 4.0
[ 2900.313] (II) Loading extension RECORD
[ 2900.313] (II) LoadModule: "dri"
[ 2900.313] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2900.314] (II) Module dri: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 1.0.0
[ 2900.314] ABI class: X.Org Server Extension, version 4.0
[ 2900.314] (II) Loading extension XFree86-DRI
[ 2900.314] (II) LoadModule: "dri2"
[ 2900.314] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2900.314] (II) Module dri2: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 1.2.0
[ 2900.314] ABI class: X.Org Server Extension, version 4.0
[ 2900.314] (II) Loading extension DRI2
[ 2900.314] (II) LoadModule: "intel"
[ 2900.314] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2900.314] (II) Module intel: vendor="X.Org Foundation"
[ 2900.314] compiled for 1.9.4, module version = 2.14.0
[ 2900.314] Module class: X.Org Video Driver
[ 2900.314] ABI class: X.Org Video Driver, version 8.0
[ 2900.314] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 2900.314] (--) using VT number 7
[ 2900.324] (EE) No devices detected.
[ 2900.324]
Fatal server error:
[ 2900.324] no screens found
[ 2900.324]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2900.324] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2900.324]

Please use [ code ] tags for pasting code https://bbs.archlinux.org/help.php#bbcode as it makes your posts much easier to read.
There's a problem with old Intel cards and the current Intel drivers. Unfortunately using older drivers means downgrading xorg-server and friends. Read about downgrading in the wiki.
I'm currently using xf86-video-intel 2.13.0-4 and xorg-server 1.9.4-1 and things are OK. My card
[karol@black ~]$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
Last edited by karol (2011-04-25 21:16:37)

Ati Mobility HD 5470/Intel integrated hybrid graphics

Hi! I have a Acer TimelineX 5820TZG laptop which has switchable graphics. I am struggling to make Arch work with my dual-graphics configuration, and I have tried a lot of things, but it doesn't work.
Right now I am working with the Intel integrated graphics card but I am not even sure if the Ati is completely switched off (I am afraid it's not, as I read in a lot of posts about switchable graphics).
The first thing I did is installing the open-source drivers for ati (xf86-video-ati) and intel (xf86-video-intel). First I tried to make both cards to work by using the vgaswitcheroo method, I mounted debugfs, modprobed the radeon module and using:
cat /sys/kernel/debug/vgaswitcheroo/switch
I checked that the currently working card is the Intel integrated. I made sure the ATI is switched off by doing
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
(As explained in the wiki for hybrid graphics) and then started the X server. In this case the X server starts and sometimes even starts loading my WM (kde), but eventually the system gets frozen and all I can see is warning messages in the terminal (CPU #1 stuck for 23s!) and I am unable to use another terminal with Ctrl+Alt+Fx or soft-resetting. Some times it gets stuck on a loop, showing a lot of messages in the terminal and not allowing me to kill the process in any way.
Then I tried modprobing 'radeon' and then using
echo DDIC > /sys/kernel/debug/vgaswitcheroo/switch
to enable the dedicated graphics card (Ati) and turning off the integrated one (intel) to see what happens. In this case the X server simply crashes, leaving me with the following log:
187.209]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 187.211] X Protocol Version 11, Revision 0
[ 187.213] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 187.214] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
[ 187.214] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
[ 187.218] Build Date: 29 December 2014 01:09:58PM
[ 187.219]
[ 187.220] Current version of pixman: 0.32.6
[ 187.223] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 187.223] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 187.228] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 16:17:27 2015
[ 187.275] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 187.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 187.276] (==) No Layout section. Using the first Screen section.
[ 187.276] (==) No screen section available. Using defaults.
[ 187.276] (**) |-->Screen "Default Screen Section" (0)
[ 187.276] (**) | |-->Monitor "<default monitor>"
[ 187.277] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 187.277] (==) Automatically adding devices
[ 187.277] (==) Automatically enabling devices
[ 187.277] (==) Automatically adding GPU devices
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 187.277] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 187.277] Entry deleted from font path.
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 187.277] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 187.277] Entry deleted from font path.
[ 187.277] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 187.277] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 187.277] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 187.277] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 187.277] (II) Loader magic: 0x818d80
[ 187.277] (II) Module ABI versions:
[ 187.277] X.Org ANSI C Emulation: 0.4
[ 187.277] X.Org Video Driver: 18.0
[ 187.277] X.Org XInput driver : 21.0
[ 187.277] X.Org Server Extension : 8.0
[ 187.280] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 187.280] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 187.281] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
[ 187.281] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 187.282] (EE) systemd-logind: failed to take device /dev/dri/card0: Invalid argument
[ 187.283] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[ 187.283] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 187.284] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 187.284] (II) LoadModule: "glx"
[ 187.338] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 187.504] (II) Module glx: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.3, module version = 1.0.0
[ 187.504] ABI class: X.Org Server Extension, version 8.0
[ 187.504] (==) AIGLX enabled
[ 187.504] (==) Matched ati as autoconfigured driver 0
[ 187.504] (==) Matched intel as autoconfigured driver 1
[ 187.504] (==) Matched modesetting as autoconfigured driver 2
[ 187.504] (==) Matched fbdev as autoconfigured driver 3
[ 187.504] (==) Matched vesa as autoconfigured driver 4
[ 187.504] (==) Assigned the driver to the xf86ConfigLayout
[ 187.504] (II) LoadModule: "ati"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 187.504] (II) Module ati: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.1, module version = 7.5.0
[ 187.504] Module class: X.Org Video Driver
[ 187.504] ABI class: X.Org Video Driver, version 18.0
[ 187.504] (II) LoadModule: "radeon"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 187.504] (II) Module radeon: vendor="X.Org Foundation"
[ 187.504] compiled for 1.16.1, module version = 7.5.0
[ 187.504] Module class: X.Org Video Driver
[ 187.504] ABI class: X.Org Video Driver, version 18.0
[ 187.504] (II) LoadModule: "intel"
[ 187.504] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 187.505] (II) Module intel: vendor="X.Org Foundation"
[ 187.505] compiled for 1.16.3, module version = 2.99.917
[ 187.505] Module class: X.Org Video Driver
[ 187.505] ABI class: X.Org Video Driver, version 18.0
[ 187.505] (II) LoadModule: "modesetting"
[ 187.600] (WW) Warning, couldn't open module modesetting
[ 187.601] (II) UnloadModule: "modesetting"
[ 187.601] (II) Unloading modesetting
[ 187.601] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 187.601] (II) LoadModule: "fbdev"
[ 187.601] (WW) Warning, couldn't open module fbdev
[ 187.601] (II) UnloadModule: "fbdev"
[ 187.601] (II) Unloading fbdev
[ 187.601] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 187.601] (II) LoadModule: "vesa"
[ 187.601] (WW) Warning, couldn't open module vesa
[ 187.601] (II) UnloadModule: "vesa"
[ 187.601] (II) Unloading vesa
[ 187.601] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 187.601] (II) RADEON: Driver for ATI Radeon chipsets:
<LIST OF CARDS>
[ 187.606] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 187.607] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 187.607] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 187.607] (++) using VT number 1
[ 187.607] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 187.607] (II) [KMS] Kernel modesetting enabled.
[ 187.666] (EE) No devices detected.
[ 187.666] (EE)
Fatal server error:
[ 187.666] (EE) no screens found(EE)
[ 187.666] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 187.666] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 187.666] (EE)
As it didn't work this way, I tried using the closed-source driver for ATI, the one in the Vi0L0 repository. I created the xorg.conf file using aticonfig --initial as suggested in the wiki. the result was Xserver crashing again, leaving me with the following log (which suggests that my system is not compatible with PxP tech by AMD and that I should not use the fglrx driver).
[ 2455.881]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 2455.885] X Protocol Version 11, Revision 0
[ 2455.887] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 2455.888] Current Operating System: Linux Alejandro-ArchPC 3.18.5-1-ARCH #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015 x86_64
[ 2455.888] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d5fd73a4-f13f-d001-10bd-71a4f13fd001 rw quiet
[ 2455.891] Build Date: 29 December 2014 01:09:58PM
[ 2455.892]
[ 2455.893] Current version of pixman: 0.32.6
[ 2455.896] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2455.896] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2455.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 19:38:17 2015
[ 2455.903] (==) Using config file: "/etc/X11/xorg.conf"
[ 2455.904] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2455.906] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2455.906] (==) ServerLayout "aticonfig Layout"
[ 2455.906] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2455.906] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2455.906] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2455.906] (==) Automatically adding devices
[ 2455.906] (==) Automatically enabling devices
[ 2455.906] (==) Automatically adding GPU devices
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 2455.906] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2455.906] Entry deleted from font path.
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2455.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2455.906] Entry deleted from font path.
[ 2455.906] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2455.906] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2455.906] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2455.906] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2455.906] (II) Loader magic: 0x818d80
[ 2455.906] (II) Module ABI versions:
[ 2455.906] X.Org ANSI C Emulation: 0.4
[ 2455.906] X.Org Video Driver: 18.0
[ 2455.906] X.Org XInput driver : 21.0
[ 2455.906] X.Org Server Extension : 8.0
[ 2455.910] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 2455.910] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2455.911] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 2455.913] (--) PCI:*(0:0:2:0) 8086:0046:1025:035d rev 18, Mem @ 0xd8000000/4194304, 0xc0000000/268435456, I/O @ 0x00004050/8
[ 2455.913] (--) PCI: (0:1:0:0) 1002:68e0:1025:035d rev 0, Mem @ 0xe0000000/134217728, 0xdc400000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[ 2455.913] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2455.913] (II) "glx" will be loaded by default.
[ 2455.913] (II) LoadModule: "glx"
[ 2455.913] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2455.913] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2455.913] compiled for 6.9.0, module version = 1.0.0
[ 2455.913] (II) LoadModule: "fglrx"
[ 2455.913] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2455.943] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2455.943] compiled for 1.4.99.906, module version = 14.50.2
[ 2455.943] Module class: X.Org Video Driver
[ 2455.944] (II) Loading sub module "fglrxdrm"
[ 2455.944] (II) LoadModule: "fglrxdrm"
[ 2455.944] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2455.944] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2455.944] compiled for 1.4.99.906, module version = 14.50.2
[ 2455.944] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[ 2455.944] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003
[ 2455.944] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:54
[ 2455.944] (++) using VT number 2
[ 2455.944] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 2455.944] (WW) Falling back to old probe method for fglrx
[ 2455.959] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2456.127] ukiDynamicMajor: found major device number 249
[ 2456.127] ukiDynamicMajor: found major device number 249
[ 2456.127] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 2456.127] ukiOpenDevice: node name is /dev/ati/card0
[ 2456.127] ukiOpenDevice: open result is 11, (OK)
[ 2461.962] ukiOpenDevice: open result is 11, (OK)
[ 2461.963] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2461.963] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 2461.965] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
[ 2461.965] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 2461.965] (II) fglrx: intel VGA device detected, load intel driver.
[ 2461.966] (II) LoadModule: "intel"
[ 2461.966] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2461.966] (II) Module intel: vendor="X.Org Foundation"
[ 2461.966] compiled for 1.16.3, module version = 2.99.917
[ 2461.966] Module class: X.Org Video Driver
[ 2461.966] ABI class: X.Org Video Driver, version 18.0
[ 2461.966] (WW) PowerXpress feature is not supported on A+I Mux platform. Please uninstall fglrx driver.
[ 2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
[ 2461.966] (EE) No devices detected.
[ 2461.966] (EE)
Fatal server error:
[ 2461.966] (EE) no screens found(EE)
[ 2461.966] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2461.966] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2461.966] (EE)
So I came back to open-source drivers and right now I am working with radeon driver blacklisted and only using the intel driver, but as the radeon is blacklisted, vgaswitcheroo is not created and I don't know if mi ATI card is completely switched off.
As you can see, I have done the stuff suggested in the Acer TimelineX wiki page and it didn't work. I have also tried some other suggested actions I found but still can't get my switchable graphics to work.
I would really like to get both my cards to work completely, so I can switch graphics and restart the X server to get better performance or enhance my batt life depending on which GPU I am using; but at this point I am just fine with turning off the ATI card completely and just work with the intel one (though if there is a method for making both work, I prefer that than just turning a card off).
Sorry for my english!!

Xabre wrote:
Bit offtopic, but when you see a sentence like this:
[ 2461.966] (EE) this is a Muxless PX A+I platform, we doesn't supported it
how can you expect anything from the driver?
You are right, that's why I said that it suggest that my system is not compatible with fglrx. I don't understand why the warning just before that error line says that I should uninstall fglrx because my system is Muxed and that line says that my system is muxless...
Anyways, it doesn't matter, the fact is that fglrx doesn't work, so I will be using the open-source drivers...

Is Flash CS4 not compatible with Intel Graphics (laptop)? Really?

Hi!
I'm graphic and animation designer. My company buys CS4 suite
including Photoshop & Flash. And I'm buying a laptop and now
choosing between one having Intel Graphics and another with ATI
Radeon. Intel has some features I need, but after googling, finding
and reading this topic:
http://www.adobeforums.com/webx?14@@.59b6c473/0
till the end, I see it does not fully support Photoshop
CS4!!! I also need Flash CS4 working, so does it support Flash?
So can you still recommend me buying intel integrated-laptop
or should I take an ATI Radeon powered one? I need Flash working
without annoying compatibilites problems. I don't want to buy an
Intel one, if it is not Photoshop- and Flash- compatible....
Thank you!

Anne,
> after googling, finding and reading this topic:
>
http://www.adobeforums.com/webx?14@@.59b6c473/0
> till the end, I see it [an Intel chip] does not fully
support
> Photoshop CS4!!! I also need Flash CS4 working, so does
> it support Flash?
It's important you understand what "fully support" means in
this
context. According to Eric Palmer's Dec 4 reply (12:11pm),
Photoshop CS4
does, in fact, run reliably on systems with Intel graphics.
Eric purports
to be an Intel employee, but obviously there's no proof of
that.
Regardless, his assertion jibes with with I hear from
colleagues with Intel
graphics chips.
It's not as if Photoshop suddenly fails if you happen to
choose, say,
red from the color swatches. It's not as if Photoshop fails
to export GIFs
on Intel machines. The only thing you're missing -- and this
is true for me
too, even though I don't have Intel equipment -- is
functionality that
relies on OpenGL. One of these features, for example, lets
you rotate the
canvas while you work on a file. I don't mean rotate the
image itself ... I
mean rotate the actual work space without resampling the
image, just as if
you were rotating the piece of paper on which you were
drawing. Granted,
that sounds like a neat feature (I'd like to experiment with
it, myself!),
but it's not a deal-breaker.
As far as I've seen, the Flash CS4 authoring tool doesn't
rely on any
OpenGL-accelerated features.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics

Can I install a graphics card on a Touchsmart 610-1050f computer with intel HD graphics and if i can where
can i find a graphics card that will install in that computer.

There are many MANY threads on this, the answer is that it's not worth your time since you have to have a replacement card that the HP system BIOS already likes,, and this is not the same as replacing anything in a desktop, this is the equivalent of replacing the graphics in a laptop.
Since the graphics cards are not considered a user upgradable component there are no lists of "approved cards" nor guides to doing it, the closest you could do is the service or recycling disassembly sheets.

3d picture control fail with Intel HD Graphics 4600

I bought a laptop with Intel core i7 with Intel HD 4600 graphics. I'm testing a vi containing a 3D picture control. However when I run the vi, the 3d object that contains the 3d picture control displays a conflict, since the moving object, and this leaves no "clean" screen 3d object made. Any tips?, Thanks.
Pdta: I'm using LV2012 and attached a picture of what that looks
Attachments:
Sin título.png ‏19 KB

I too am having similar issues with 3d picture control paired with Intel HD Graphics 4000. Has this issue been resolved and what was the fix?
Additional information, my lap top also has a NVIDIA Quadro K3000M card. This display adapter is used when only external monitors are used and not the laptop display. In this configuration my 3d picture control works fine. When I switch to the lap top display the Intel HD Graphics 4000 is used and that is when I see the 3d graphics issue.
I have tried to turn off hardware acceleration and not given any acceleration option as suggested in the previous post.
I have the latest device driver for the Intel HD Graphics 4000.
I am using LabView 2012
Thanks for the help.

Can Pavillion dm4 with Intel HD Graphics support monitor with 2560 X 1440 resolution?

Trying to upgrade my monitor. It is hooked with HP Pavillion DM4 laptop. Can Pavillion dm4 with Intel HD Graphics support monitor with 2560 X 1440 resolution? Thanks.
Hetn

Need full model number and Intel HD version (4000, 4600?) and which port you are using. Generally HDMI output is capped at full HD; 1920 x 1080.

Upgrade graphics on T43 with Intel Integrated adapter?

Similar Messages

Maybe you are looking for