Upgrade HDD to SSD (Do i need to re-install?)

I just bought an SSD (Samsung 470 series is the one thats best with MBP right?) and i want to replace it with the stock HDD that came with my 2011 MBP 13".
What if i upgrade RAM from 4GB to 8GB and transfer from HDD to SSD by carbon copy cloner. Do i need to re-install Lion then?
Is TRIM automatically enabled if i transfer from HDD to SSD?

Upgrading the RAM is fine by itself. Just know you only have two slots, and thus need matching pairs of 4GB modules to increase the RAM from 4GB to 8GB. If you have $900, OtherWorld Computing has 16GB of RAM (two 8GB modules) for sale. (no compensation)
Use the online Crucial checker and MacTracker to make sure your getting the correct specs of the RAM (and the amount of modules) before purchasing.
What you need to do is use the free to use (donations accepted) Carbon Copy Cloner on the HDD while it's still in the machine, clone to a external powered drive and hold option to boot from it, test it out that it works.
Then make the HDD to SSD switch and option boot from the clone again, format the SSD HFS+ Journaled and use CCC to clone it onto the SSD.
OtherWorld Computing and iFixit has videos, pictures, instructions and tools needed.
When you clone, it clones the OS X partition only, not both your OS X partition and the Lion Recovery Partition, which in your case is unnecessary to have if you have a "hold option" bootable clone. (should keep two at times)
If you need to download Lion installer again, simply use MacAppStore and hold option and click on Purchases, either in Lion or Snow Leopard and then make a couple of " hold c" bootable DVD's from these instructions.
http://www.eggfreckles.net/notes/burning-a-lion-boot-disc/
These DVD's made from these instructions contain the full OS X Lion, not a Recovery Lion disk or the Lion Recovery Partition which Apple provides a download for and requires a lengthily Internet connection to download Lion before it's installed.
Far as setting the TRIM, I don't know about that. Hopefully someone else will answer.
If not ask Dave (Bmer) over here:
http://macosg.com/
He replaced his hard drive with a OCZ Vertex, the fastest SSD's on the planet and also his Superdrive with a 7,200 RPM 750GB drive for storage (note: you can't boot from a Lion/Snow/Windows DVD from a external optical drive) so he would know best what to do.
Also OCZ just came out with a 480 gb or so very fast SSD, the Vertex 3 series, just as fast as the smaller SSD's but with more storage capacity, so that would be worth checking into. (smaller SSD's are faster, larger older ones are just a bit faster than a regular hard drive)
Also check out your Mac model's SATA number using the fre MacTracker and System Profiler, this way you can by the right SSD for the price and know your bus speed limitation accessing the SSD.
Good luck.

Similar Messages

  • Steps in upgrading HDD to SSD on Macbook Pro 13 Mid 2009

    I need help in upgrading the RAM and Storage in my MacBook Pro 13" Mid 2009. I have bought 8GB Memory and 512 GB SSD from Crucial.com. I have watched a lot of Youtube Videos on how to install them but I am afraid I am still missing some things I need to do.
    I have created a back up on an external drive and have been updating it regularly. I have also created a back up on Time Machine (I think I did).
    Is there anything else I need to do? How about the OSX? Do I need to create a back up for it? Or is it part of the back up I have on an external drive?
    Please help! Thank you.

    " I have also created a back up on Time Machine (I think I did)."
    Check this out:
    http://macintoshhowto.com/repair/back-up-computer.html
    Once you think you've done it correctly restart and hold down the option key or go to "System Preferences" under the Apple and look at "Startup Disk".
    That will tell which Disks are bootable.
    Now about that Crucial drive:
    http://forum.crucial.com/t5/Crucial-SSDs/512GB-M4-and-2009-Macbook-Pro/td-p/7805 6
    It's not clear to me that this issue was resolved. The last post goes nowhere!
    I always use OWC:
    http://eshop.macsales.com/shop/SSD/OWC
    Just did two including this MacBook Pro early 2011 13" and a 2012 Mini. Total no-brainer! The way I like it.

  • X230 upgrading HDD to SSD -- side rails???

    Hi all,
    Just got my x230 today, and was planning on replacing the HDD with a Samsung 840pro.
    However looking at the manuals from Lenovo, it appears that the HDD has rubber rails and the solid state drive is supposed to have spacers.
    Do I need to get the SSD-type spacers, or can I just use the rubber rails that are currently in the laptop?
    If I do need them, how do I get them?  I can't seem to find them on the accessories list.
    @Lenovo: any official word on this?
    Solved!
    Go to Solution.

    Thanks Bill.
    For the sake of future upgraders who might share my worries ...
    Yes, they fit just fine and the machine is running great.
    --mike

  • Replaced HDD w/ SSD, replaced Sata Cable, can't install OSX

    Hello All,
    So I've got a Late 2009 13in MBP that I thought had a HDD go bad. Nothing unusual, so I replaced the HDD, had a second one "go bad." After a bit of trouble shooting, I ordered a new Sata cable and a a 512gb Crucial M4 SSD. Replaced both, and I've been having some trouble ever since.
    I've tried to install 10.6, 10.7, and 10.8, and every single attempt has failed in it's own way. 10.8 refuses to create a recovery partition, 10.7 just hangs on first reboot after copying files and never reboots to finish the installation, 10.6 makes it half way and refuses to copy Essentials.pkg.
    I did a test and used Carbon Copy Cloner to clone my other macbook pro (10.8) to the HDD with the 13in in Target Disk Mode, and it failed at first boot but after reparing disk permissions a few times I got it to boot just fine.
    I'm left with two options. Either the new Sata cable is also fried, or the logic board is fried. The macbook has passed both Apple hardware test and TechTool Pro's hardware test. But no matter what, I can't get an OS installed on it the traditional way.
    Just wondering if anyone here can shed some light on some possible solutions... this post is more of a last resort as I'm all out of ideas.
    Thanks!

    Could be the SSD.

  • W520 - Replacing Broken HDD w/SSD?

    Tech Support said HDD needs to be replaced & since I am out of warranty and lost all my files... I would like to just upgrade to an SSD.
    I need some help - The Samsung Evo 840 500GB & Crucial MX100 512GB have been suggested. 
    Link to image 1
    Link to image 2
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    Slooptron wrote:
    Would you recommend any RAM to go with that? In the pictures attached I was told I was lacking some.
    Not knowing how much RAM you have installed at the moment, I'd hesitate making a "blind" recommendation.
    With that said, I always advise buying a known brand name such as Crucial/Micron, Samsung, Hynix, Elpida. Mushkin...and staying away from "no name" brands as well as from "Value RAM" offerings from manufacturers such as Corsair and Kingston.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • New SSD on the way, want to install Snow Leopard. What disc do I need?

    Hi,
    I have a 2008 Mac Pro, currently running Leopard 10.5.8 but along with the Snow Leopard OS I have ordered a 128GB SSD that will be my primary boot drive from the moment it arrives.
    Since the Mac Pro has 4 slots for hard drives I will just throw out an old 200GB SATA HD and put my current 1TB bootdrive in its place.
    My SSD will be installed and I plan on installing snow leopard on it without prior erasing of my Leopard 1TB disk.
    How can I even accomplish this?
    It seems that (this is what I have taken from a few threads around here) I will need to have Leo installed to use the upgrade disc (which I qualify for, technically).
    When I want to install Snow Leo on a fresh hard drive, is there a step in the installation that simple asks to put in our Leopard disc so the installer verifies we have it, then continues with the Snow Leopard install?
    Thanks for reading,
    I hope some of you can lift this confusion I am having here.
    (never thought installing an OS could get this complicated)
    M.

    You can do what you want with either the $29 or the $9.99 upgrade disk. Leopard does not need to be installed.
    To erase and install (see upgrade option below), start up to your DVD and stop after selecting your language. Use the menus to start Disk Utility and erase your drive. Quit Disk Utility and proceed with your installation. At the end, you will be able to choose to reclaim your settings, files, and apps from your original installation (on the external now) (plug in the external at the point of the last install restart).
    Upgrading is a very sound process on a Mac. An upgrade is performed by installing over your existing installation from the desktop or having started from your SL DVD. All your programs, data, and settings will be present after an upgrade, but incompatible programs will be archived.
    Message was edited by: donv (The Ghost)

  • W540 Replace HDD to SSD

    Hi ...
    To replace the HDD with SSD, we just need the SSD.. right ?
    No need for any special connector or adaptor.
    cheers, Sumit

    Hi Sumit_tayal,
    Welcome to Lenovo Community!
    As per the query we understood that you are looking for HDD to replace with SSD for your ThinkPad W540.
    Yes it is same has HDD connector you don’t have to use any type of connector or a converter.
    http://shop.lenovo.com/us/en/laptops/thinkpad/w-series/w540/#tab-tech_specs
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I have a hdd from late 2009 that I upgraded from leopard to snow leopard to lion to mountain lion.  I want to upgrade the hdd to ssd.  Do I need to buy a new copy of mountain lion to install on the ssd?  If not, then what is the procedure to transfer?

    I have a hdd from a late 2009 mbp.  I upgraded from leopard to snow leopard to lion to mountain lion.  Now I want to upgrade to a ssd.  Do I need to purchase a new copy of mountain lion to go on my new ssd? If I don't, then what is the procedure to transfer mountain lion with my 4 user accounts onto the new ssd from the hdd?
    I'm confused on if I can use the recovery hd on a thumb drive to install mountain lion on my ssd.  Will it be pheasible with so many OS X upgrades?  And then how do I get my user accounts onto the ssd from the hdd.  Do I use migration assistant?  Do I need to make a time machine backup first?  Should I use something called Carbon Clone or something like that?
    Thanks for reading

    If you have a cable that connects and external HDD to the MBP, it will do.  If it is something like this, an  enclosure will not be needed for the swap:
    An enclosure allows you to use your old HDD for storage or backup purposes.  The cable will not. 
    Here are instructions as to how the swap can be performed using DISK UTITY.  Substitute You cable for the enclosure in same:
    INSTALLING A NEW HDD IN A MBP
    1. Make certain that you have backed up all of your important data.
    2. You will need a HDD enclosure.  One with a USB connection will do.  A 9 pin Firewire is better.
    3. Install your new drive in the enclosure and connect it to your MBP.
    4. Open DISK UTILITY>ERASE.  From the left hand column drag the new drive into the 'Name' field.  Make sure that the format is 'Mac OS Extended (Journaled)'.  Click on the 'Erase' button.
    5. Click on the 'Restore' button (on top).  Drag the old drive into the 'Source' field and the new drive into the 'Destination'  field.  Click on the 'Restore' button on the bottom right hand corner.
      Depending upon the amount of data you are transferring, this may take a couple hours or more.  A Firewire will speed up the transfer.  This will result in both drives having identical information on them.
    6. After the data transfer has completed, you may swap the drives.  Start the MBP and you have finished the installation.  The initial boot may take a bit longer than you are accustomed to, but that is normal.
    7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
    If there is any confusion on your part, post back.
    Ciao.

  • How to upgrade from HDD to SSD in Mid 2010 13inch MacbookPro?

    I am upgrading from HDD to SSD and would like the step by step direction of how to do it on my 13inch MacBookPro mid 2010. Also, I would like to do a clean install of the OS onto the new SSD, and simply transfer my data(i.e. documents, pictures) from the old HDD to the new SSD(Samsung 500GB)
    Any detailed directions would be appreciated. You may send responses directly to my address: ******* Thanks in advance
    <Edited by Host>

    Tolefe1 wrote:
    Thanks. How do I booth to IR? Won't  I need to connect to the internet to be able to booth to Internet Recovery... Please give steps as I am pretty new to this.
    Turn the Mac on (or reboot it) and press command-option-R as soon as you hear the startup chime. Hold the keys down until you see a globe, then release. When the Recovery Menu appears you choose Disk Utility and format the SSD for use in a Mac (Erase>Set Format to MacOS Extended (Journaled), then exit Disk Utility and choose Install OSX
    You will need to be connected to the Internet and your Mac should detect your network and ask for a password automatically when Recovery Starts.

  • IdeaPad Flex 14 HDD to SSD upgrade

    Hi!
    I have the Lenovo IdeaPad 14 (US version) with a hybrid drive Seagate SSHD Thin (500GB HDD + 8GB SSD). I want to upgrade to an SSD and dual-boot with Ubuntu 14.04. My main issues are the following:
        - Is the HDD user replaceble? Would I be voiding my warranty if I open my laptop?
        - Can I use the mSATA and SATA to put two drives and dual-boot between them? Would the BIOS/UEFI allow me to do so? (I haven't previously worked with mSATA drive and I don't know how they are recognised by the motherboard or how they appear in device manager)
        - How do I safely transfer my Windows 8.1 installation from the old SSHD to the new SSD in order to keep my files/settings and most importantly my Windows license?
        - While I'm at it, why not upgrade the RAM as well. So does the laptop have one or two slots for RAM as I couldn't find any specs/service manual online?
        - Where do I find a service manual in order to know how to properly disassemble the laptop?
    If anybody knows the answer to any of these, please write/post a link here. It will be much appreciated!
    Thank you! 
    Solved!
    Go to Solution.

    Once the screws are removed under the angular feet the back comes of the laptop.
    Glad you've been able to have the confidence to get the back of the laptop. I guess you thought what I thought, the base inards will fit anything from 13.3" to 15.6 using little more than different length ribbon connectors. Fitting it in a 11.6" device may be possible although the hard drive may have to SSD.
    I find it hard to believe you need to remove 24 screws to remove the HDD, and 24 to go back afterwards. Had a play with Ubuntu 14.04 using VMWare player myself, although for some stupid reason it didn't prompt for a user and password during the install leaving me only able to use the guest account to log in. I clearly need 8GB of RAM and an SSD to make a smoother VM experience of Ubuntu and another VM install to save my settings.
    Certainly worth taking the back off to have a look.

  • Upgraded to 10, How to move from HDD to SSD? (Y-Series Laptop)

    Howdy all, I have a Lenovo Y Series Laptop that came with a combo HDD/SSD. I assumed that Windows would be installed on the SSD, leaving the HDD for everything else. Turns out this isn't the case. The SSD is currently at 22.6g free of 24.9, and I'm honestly not sure if it's a totally separate drive, or if it's integrated into the HDD somehow.. I am trying to figure out how to move windows onto the SSD potion of the hard drive, but just want to make sure I'm not forgetting something. I assume I'll have to:Backup any files I want to keep (there are none, just applications I can get again after)Make a Windows 10 Boot Drive on a USBReformat SSDBoot from the USBPerform clean install of Windows 10 on SSD(possible step here of backing up lenovo software?)Reformat HDDRe-install all apps + programsAre there any Particular things that I need to make sure of for Windows 10?Am I forgetting anything?Is this a terrible idea?Is this totally not how my particular hard drive works?Is there a waaaay easier way to do this without possibly destroying everything? Lastly I want to make sure that the Lenovo software stays on the laptop, I assume it'll all go bye-bye if I do a clean install. I tried this once years ago and ended up making the Fn keys stop working, the fan and temperature control goofy, and I think it may even have been haunted.. Any advice or known disastrous things to avoid would be super helpful.

    hi Trosh,
    Welcome to the Forums.
    Using the parts lookup page to check the hard drive specs on models 80FA002CUS and 80FA002DUS, those machines are configured with an SSHD (1TB HDD with a built-in 8GB SSD cache).
    The 22.6 GB free of 24.9 GB that you're seing is likely the D:\  drive, which is a partition of the 1TB HDD (you can verify this by opening up Disk Management)
    As for upgrading to Windows 10:
    1. Ensure that you have a backup copy of your files before upgrading and create a recovery drive just in case.
    2. Before you can clean install Windows 10, you will need to upgrade your current installation (e.g., Windows 8.1) first to Windows 10 and activate. Once this is done, you can proceed in doing a clean install. If you proceed in doing a clean install on first attempt, you may not be able to activate Windows.
    You can read more in this article:
    How to Activate and resolve common Product key issues in Windows 10
    Note that doing a clean install will definitely remove all preloaded apps and drivers, thus, you will need to reinstall them back (some proprietary preloaded apps though doesn't have an Installer due to license limitation)
    3. After upgrading Windows 8.1 to Windows 10, some preloaded apps and drivers may have limited functionality or may not work at all. Thus, you will need to update to the latest Windows 10 drivers (if available).
    More info here:
    https://support.lenovo.com/us/en/documents/ht103611
    4. In case you get issues with the upgrade, you can always refresh Windows 10 or go back to the previous Windows build or by doing a system recovery then re-upgrade.
     - Refresh Windows 10
     - Windows 10 - Go Back to Previous Win1dows
     - Link to picture (select System Recovery)
    5. If you're leaning towards an SSD upgrade (e.g., 256GB or 500GB), you will need to migrate the OS from the SSHD to the SSD and upgrade to Windows 10. If you have already originally upgraded though on the stock drive, you can clean install Windows on the new SSD.
    More info before upgrading to Windows 10:
    Windows 10 - Upgrade Installation
    Hope the info above answers your questions.
    Regards

  • HDD to SSD upgrade for HP Pavilion 15 notebook PC

    Hey there!
    I own a HP pavilion 15 notebook PC, [Model number: F6C42PA#ACJ]. Currently it is equipped with a 1 TB SATA HDD. I was planning to upgrade it to SSD. Kindly guide me through steps and compatible products. Also is there a simple way to just walk into an authorised service centre and request thm to do the upgrade?
    Thank you,
    This question was solved.
    View Solution.

    Here is the Service Manual:
    Manual
    See page 59. 
    Not your exact model but very close and the videos will perhaps be more helpful. 
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c04324972&DocLang=en&docLocale=en_US&jumpid=...
    Any 2.5 inch SATA form factor SSD will work and I recommend a Samsung Evo 850. 
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820147372&cm_re=Samsung_850_Evo-_-20-147-372-_...
    There is a link to all the available sizes on the page. I would recommend at least a 256 and 500s are pretty affordable these days.
    Where do you live? Country only, please. I have heard that HP Service Centers will perform memory and SSD upgrades on these "closed" systems but I am not sure where all of them are located or what they would charge. You should be able to find a competent local computer shop to do it. It does put the warranty in jeopardy but the warranty will not be revoked if the job is done properly, without damage to the laptop. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Change HDD with SSD in Notebook HP ENVY 15-k000nl - Warranty expiration - Maximun RAM Upgrade

    Good morning,
    I have bought the above notebook one week ago, in the HP main site there wasn't photo about the rear and when I saw there is no easy way for chanhe HDD to SSD, I have to unscrew about 15 screws located here and there
    Just I would like know if I change the SSD the warranty will expire?.
    At the same time please can I upgrade the RAM to 16 GB DDR3L? which is the Maximun RAM Upgradable?
    Best regards
    Christian

    Hi, Christian:
    Yes, if you replace the hard drive or memory, the warranty will be voided as neither component is a DIY (do it yourself) project.
    Please see the service manual at the link below, chapter 6 for the authorized service center removal and replacement procedures for those components.
    http://h10032.www1.hp.com/ctg/Manual/c04409752.pdf

  • Plz upload a video on how to upgrade a traditional HDD to SSD on lenovo t61

    can someone plz upload a video showing how to upgrade a traditional HDD to SSD on lenovo t61, help appreciated thanks
    Solved!
    Go to Solution.

    Hi ghattiya,
    Removing and replacing the HDD, assuming the same form factor, is shown in the Lenovo Training Videos.
    For tips on how to clone the drive or do a clean install, I suggest starting by searching the forum.
    I don't work for Lenovo. I'm a crazy volunteer!

  • Should I upgrade RAM or HDD to SSD on my Mac mini mid 2010?

    Hello,
    I have a mid 2010 Mac mini with 2GB of RAM. My apps like E-Mail, Safari, Google Chrome and others are starting slow and sometimes running slow. Should I upgrade RAM to 4GB or 8GB or replace my 320GB HDD to SSD?
    Thank you yor help, DZetko

    You are running a Core 2 Duo. Even a duck has paddling limitations. You are running Mountain Lion on a 2GB machine and it is starved for RAM. The performance is gravitational.
    Upgrade your machine via the preceding MacSales link to matching 4GB modules for 8GB. I believe you will be astonished at the improvement. Make certain that you have used Disk Utility to verify/repair your system preferences, and then verify the boot drive while in Disk Utility.
    In your login directory (~) go into the Library/Caches folder, select everything in it and move to Trash. Don't bother to empty the Trash just yet. Shutdown your mini.
    Now, power on your mini. At the chime, press and hold the shift key until you see a grey horizontal progress bar. At the login window, press and hold the shift key again as you press the right-arrow icon to login. Release the shift key when the Finder menu bar appears. You are now in Safe Boot Mode. Empty the Trash. Reboot normally.
    This just did a series of house-cleaning steps for you. It removed and/or rebuilt system cache files, including the Fonts cache. It also rebuilt the database governing the open with ... menu. So, if you had any duplication in there, they are repaired. Safe Boot Mode also does a low-level inspection of your boot drive. You should see some additional performance improvement. I do a Safe Boot Mode about once a month as routine maintenance.
    With the improvements I have suggested and preceding pointers, you should have a 2010 Mac mini working as well as it can with Mountain Lion and a SATA II hard drive.

Maybe you are looking for