Upgrade help from os 9.1 to 10.3 panther

Hey, How is everyone doing?
Recently my friend gave me an old iMac. It is one from Summer 2000. He no longer had any use for it so I said I would take it for my son who is into video editing.
He also gave me OS X 10.3 Panther
I seem to be having a bit of an issue upgrading here so i'll post what I can.
I put the boot disc in and the iMac reads it fine, I hit install and it runs the program, then gives me the error
"iMac Essentials could not be installed please upgrade firmware"
So i get on one of the chat's with an agent and he gives me a link to get the newest firmware patch I download it and install it, and I get the same error again. can anyone shed any light as to why this may be happening? any help would be greatly epreciated.
also Im running three computer's
Dell Demension 8400 with Windos XP professional 3.2 ghz processor 120gb hard drive 1 gb ram
Dell Demecison XPS 400 with Windows NT 800 ghz processor 12 gb hard drive with a second 10 gb hard drive put in and running 320 mb of ram
iMac "iPac" with OS 9.1 nut really sure whats in it havent looked at it really
Thanks
Bob
and I will not be in town from 11/20 through 11/28
I prefer if someone would email me with some information as I don't want my post to get lost :/
I will be up checking the boards for about another hour and a half or so
[email protected] or [email protected] will work

Hello and Welcome to Apple Discussions; if only it were under better circumstances.
Do not reset the PRAM until you are in a safer state.
The fix for this is a little long winded so all I'm going to do is post the link to it and the firmware you'll need.
iMac slot-loading firmware problem solver - read carefully.
Firmware for slot-loading iMac G3
IMVHO 128Mb of RAM probably isn't enough for Panther to run really well so you'll want to upgrade anyhow.
iMac DV RAM - even a £35 upgrade will make a huge difference. Fitting Instructions.
mrtotes

Similar Messages

Recently upgraded laptop from Windows Vista 2 Windows 7. I had 2 delete itunes,then download again.Music etc purchased over 2 years is in library,soon as I try to play,message saying it can't be located! Any Help?

Recently upgraded laptop from Windows Vista 2 Windows 7. I had 2 delete itunes,then download again.Music etc purchased over 2 years is in library,soon as I try to play,message saying it can't be located! Any Help?

The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141

I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks

I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks

vinayakfrommonroe wrote:
I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks
Hi: Check out the Apple article below.
https://discussions.apple.com/message/15112985#15112985
Stedman

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

HT2240 I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade. help

I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade. help

I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade.
And just what sort of changes in "appearance" did you expect?
If you can access the editing, conversion, and/or properties options once a file is loaded then the QT 7 app has been upgreaded for "Pro" use.

Trying to upgrade itunes from 10.4 to 10.6.3 and nothing happens when i click download. could anyone help please?

trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download. could anyone have a suggestion of a possible solution? Thx

trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download.
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

My drive recently had to be replaced with a new one installed by Apple they reinstalled all my stuff from my time machine. Most my programs had to be updated which I managed with a little help from my friends, but the last one that I can't solve is

My IMAC OSX 10.6.8 2.8 GHz intelcore 2Duo 4GB 800 Mhz DDR2 SDRam recently had to have its hard drive replaced by apple thy actually had to give me a larger one because mine was no longer available,They also reinstalled all my programs and data from my 2 terrabite time machine back up. I got my system home and found that I had to upgrade most of my programs which I managed with a little help from my friends, but I still have one problem that I can't solve I have a Nikon Coolpix S6 that I have Been Syncing with my Iphoto since I've got it 3 years ago and now when I place it in the cradle the program reconizes it and says that it is going to start to import the new photos the little white wheel in the center of the screen starts spinning but nothing else happens. I checked all my connections and they are goog plus I even downloaded a nikon progam just to double check the camera & cradle and it works there but it wont pair off with my IPhoto.

First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
Image Capture: Free import tool on Mac OS X - Macgasm
Message was edited by: den.thed
Sorry John, I didn't see your post when I clicked the reply button. Dennis

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

Unable to Sign in analytics After Upgraded obiee from 10g to 11g

Hi all,
I have problem when upgrading catalog from 10g to 11g.
The error is:" Unable to Sign In . An invalid User Name or Password was entered. "
I upgraded following the steps like this:
1.Login EM and check BI server is running successfully.
2.Started the UA.bat.
Select the operation:Upgrade Oracle BI RPD and Web Catalog.
Step by Step,and the upgrade completed successfully.
3.Open the RPD online using the Admintool succefully.
4.But when I Login the BI and view the dashboard with the 10g's user (Administrator),the page appear the error "*Unable to Sign In . An invalid User Name or Password was entered.* "
5.Then I Try to Regenerating User GUIDs
1. Update the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI:
a. Open NQSConfig.INI for editing at:
b. ORACLE_INSTANCE/config/OracleBIServerComponent/coreapplication_obisn
c. Locate the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter and set it to YES, as follows:
d. FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES;
e. Save and close the file.
2. Update the Catalog element in instanceconfig.xml:
a. Open instanceconfig.xml for editing at:
b. ORACLE_INSTANCE/config/OracleBIPresentationServicesComponent/
c. coreapplication_obipsn
d. Locate the Catalog element and update it as follows:
e. <Catalog>
f. <UpgradeAndExit>false</UpgradeAndExit>
g. <UpdateAccountGUIDs>UpdateAndExit</UpdateAccountGUIDs>
h. </Catalog>
i. Save and close the file.
3. Restart the Oracle Business Intelligence system components using opmnctl:
4. cd ORACLE_HOME/admin/instancen/bin
5. ./opmnctl stopall
6. ./opmnctl startall
7. Set the FMW_UPDATE_ROLE_AND_USER_REF_GUIDS parameter in NQSConfig.INI back to NO.
Important: You must perform this step to ensure that your system is secure.
8. Update the Catalog element in instanceconfig.xml to remove the UpdateAccount GUIDs entry.
9. Restart the Oracle Business Intelligence system components again using opmnctl:
10. cd ORACLE_HOME/admin/instancen/bin
11. ./opmnctl stopall
12. ./opmnctl startall
BUT THE ERROR ALSO EXISTING!
So,waiting for the help,thanks!

Hi,
if your using oracle db please make sure your db settings and tnsnames.oRA settings
also try you please try below troubleshooting steps:
1) please check latest error message and find the root cause,
presentation catalog log path:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIPresentationServicesComponent\coreapplication_obips1\sawlog0.txt file
also check it nqserver.log file
oracle bi server log path ref:
obiee installed Drive:\Oracle\Middleware\instances\instance1\diagnostics\logs\OracleBIServerComponent\coreapplication_obis1\nqserver.log
2)can you try to login RPD,EM and console by using your weblogic a/c then try to login with some other user.
if its not working then try to delete that users from catlog and check it Check OPMN services are running state.
e.x:
C:\Oracle\Middleware\instances\instance1\bin>opmnctl startall
opmnctl startall: starting opmn and all managed processes...
C:\Oracle\Middleware\instances\instance1\bin>opmnctl status
Processes in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 4992 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 2420 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1856 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 5684 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 5232 | Alive
3) Refresh GUIDs and Restart WebLogic and OPMN Services then try it again...still if your getting same issues then try to
check DB(try to login and confirm) and check it RPD --> physical layer connection pool setting and try to
view physical data.
also paste it your latest error log message (nqserver.log and sawlog01.log message) here
THanks
Deva

R12 Upgrade Report from 11i Getting Error

Hi everyone,
We are currently working an R12 upgrade project from 11.5.10 to 12.1.3. I am currently converting a report from 11i to R12 but it is erroring out when I run it in R12. Below is the log. Any help would be greatly appreciated. Thanks.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXHH_APXNACHA_CHASE module: XXHH: NACHA Payment Format Chase (HHG)
Current system time is 06-DEC-2011 15:52:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='JRG120111b'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 6 15:52:04 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3660174.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 06-DEC-2011 15:52:06
---------------------------------------------------------------------------

It looks as though its failing in your beforereport trigger.
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.I dont believe payment batches are used anymore as they need to be done via Payment profiles and therefore you will need to use Payment Instruction ids instead. Also the setup at R12 is Mosaic
try including this. as the first statement in the Beforereport trigger. All the banks tables payment tables has changed so unless you have changed these to you will need to adjust these correctly to the R12 tables.
BEGIN
MO_GLOBAL.INIT ('SQLAP');
MO_GLOBAL.SET_POLICY_CONTEXT('S',FND_PROFILE.VALUE('ORG_ID'));
END;

Upgrade IDSM2 from 4.1(5)S225 to 5,1 using application partition

can i upgrade an IDSM2 (WS-SVC-IDSM2-BUN)in a 6513 from 4.1(5)S225 to 5.1 by copying the 5.1 application partition to the sensor
[from the cisco userguide]
Chapter 10 Configuring the Sensor Using the CLI
Reimaging Appliances and Modules
Reimaging the IDSM-2
This section contains the following topics:
Catalyst Software, page 10-124
Cisco IOS Software, page 10-126
Catalyst Software
To reimage the application partition, follow these steps:
Step 1 Obtain the application partition file from Software Center on Cisco.com and copy
it to an FTP server.
Step 2 Log in to the switch CLI.
Step 3 Boot the IDSM-2 to the maintenance partition:
cat6k> (enable) reset module_number cf:1
Step 4 Log in to the maintenance partition CLI:
login: guest
Password: cisco
Step 5 Reimage the application partition:
[email protected]# upgrade ftp://user@ftp server IP/directory
path/image file
Step 6 Specify the FTP server password.
After the application partition file has been downloaded, you are asked if you
want to proceed:
Upgrading will wipe out the contents on the hard disk. Do you want to
proceed installing it [y|n]:
Step 7 Type y to continue.
When the application partition file has been installed, you are returned to the
maintenance partition CLI.
Step 8 Exit the maintenance partition CLI and return to the switch CLI.
Step 9 Reboot the IDSM-2 to the application partition:
cat6k> (enable) reset module_number hdd:1
Step 10 When the IDSM-2 has rebooted, check the software version.
Step 11 Log in to the application partition CLI and initialize the IDSM-2.
See Initializing the Sensor, page 10-2, for the procedure.
IF NOT, THEN IS THERE A SHORT CUT FROM 4.1 to 5.1 ?

Just wanted to clarify some things.
As Scott has already confirmed you can re-image using the method described and following Scott's advice on what additional updates to install.
BUT understand that any configuration you have your 4.1 sensor will be lost during that method of re-imaging to 5.1.
Another alternative is to first upgrade from 4.1(5)S225 to 5.0(1), and then to upgrade to 5.1(1).
The upgrade to 5.0(1) will convert the 4.1 configuration into a compatible 5.0 format.
I saw another post you made implying that you had to downgrade back to 4.1(5)S189 to do the 5.0(1) upgrade. This is not the case. You can upgrade directly from your current 4.1(5)S225 to 5.0(1).
You can install the IPS-K9-maj-5.0-1-S149.rpm.pkg file directly on your current 4.1(5)S225 sensor.
When S225 was installed on your 4.1(5) sensor, it also placed in storage the corresponding S225 update for your 5.0 sensor.
So when IPS-K9-maj-5.0-1-S149.rpm.pkg is installed on the sensor it will detect that stored off S225 for 5.0 and install it at the same time.
So once installed you will be immediately at 5.0(1)S225.
Once at 5.0(1)S225, then you can upgrade directly to 5.1(1) using the IPS-K9-min-5.1-1d.pkg upgrade.
(NOTE: 5.1-1d file was created to fix some upgrade bugs, but still installs the same 5.1(1) files as the original 5.1(1) upgrade package).
So you will wind up at 5.1(1)S225.
Now at this point I would recommend installing at least one later signature update (S226 or higher in your case) BEFORE installing the 5.1(1p1) patch.
And AFTER the signature update, then install the 5.1(1p1) Engineering Patch (contact the TAC for this patch).
Because of this specific upgrade path, the best way to avoid some issues is to install at least one signature update before installing the 5.1(1p1) patch. The signature update helps to ensure the sensor is ready for the 5.1(1p1) upgrade. Some of the files needed for the 5.1(1p1) upgrade have been seen to not get carried forward properly in the upgrade from 5.0(1) to 5.1(1), but a signature update corrects those issues.
NOTE: This precaution of installing the signature update BEFORE the 5.1(1p1) is only needed when upgrading from 5.0(1) to 5.1(1). If imaging directly to 5.1(1) using the maintenance partition, then the 5.1(1p1) can be installed before a signature update without an issue.
Once 5.1(1p1) is up and running and monitoring packets and generating alarms, then additional signature updates can be installed afterwards.

There are some form errors after upgrading ebs from 12.1.1 to 12.1.3

Hello , EBS experts,
I have some upgrading issues need your great help. thanks in advance!
We have installed EBS 12.1.1 on Oracle Linux 5.7, everything is okay.
Now, we need to upgrading EBS from 12.1.1 to 12.1.3, after all the upgrading process were done. We have encountered the form error while opening the AR transaction forms as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
Lots of Receivable forms have the same issue, I have upgrading the ebs from 12.1.1 to 12.1.3 with 2 times, but every time, I have encountered the same issue.
Can anyone have me? it's very urgent for me to finish this task, thanks!
Here is my upgrading process for your reference
1. Installed the EBS 12.1.1 and everything is okay(Create a AR, AP transaction and invoice and post to gl).
2. I have referenced this document to upgrading the EBS
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
To apply Oracle E-Business Suite Release 12.1.3, follow these steps:
1） 9239089
2） 9239090（US）， then applied the 9239090_zhs as I have the zhs language on the EBS 12.1.1
3) 9239095
Post-Update Steps
1. Apply post-install Oracle E-Business Suite Applications Technology patches. (Required)
4)9817770
5)9966055
2. Update database tier nodes with the Oracle E-Business Suite Release 12.1.3 code level.
Application tier:
Database tier:
3. I have applied the following patches before upgrading to 12.1.3(before step 2 as above)
Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade
Patch E
B) For users on 11.1.0.7:
7111245 - 7684818 also includes 7111245 but this is a later version of the patch. Disregard errors related to 7111245 being installed when applying 7684818.
7211965
7330434
7486407
7627743
7639602
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
(I have compared the above patches with my db(ebs 12.1.1 ) and some patches have already been applied based on EBS 12.1.1), and the following patches were not included on the db, so I applied the following patches one by one
7684818
8199107
8639653
8940108
9026927
9066130
9554727
9743057
Modify Initialization Parameters
disablefast_validate=TRUE
pgamax_size=104857600
Can anyone help me on this issue? thanks!
Open AR forms such as transaction, receipt, etc, and always encountered the same issues as below
ORA-01403: no data found
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-04062.
The AR forms opened failed. thanks!
Thanks!
Chuan Ling

Hi, Helios,
Thanks for your great help on this issues.
Here is my verification result for your reference as below
1.Known errors generated on the People form (PERWSHRG) [ID 206584.1]
10 - Error: FRM-40735:PRE-FORM trigger raised unhandled exception ORA-04062.
ORA-01403:no data found
APP-FND-01242:cannot read value from field: GLOBAL.G_NAV_NODE_USAGE_ID
Cause: The field: Global.G_NAV_NODE_USAGE_ID couldn't be located or read.
Resolution: This is an issue associated with multiple APPL_TOPS. Ensure
that references to the APPL_TOP are pointing to correct one.
I don't know how to fix this? do you know?
2.After Upgrade From R12.0.4 To 12.1.1 Property Manager Forms Give Error FRM-40735 [ID 1092394.1]
[r12app@infsgvm14 forms]$ strings -a $PN_TOP/patch/115/sql/PNPFUNCB.pls | grep '$Header:'
-- $Header: PNPFUNCB.pls 120.19.12010000.12 2010/03/26 10:43:10 rthumma ship $
my file's version is 120.19.12010000.12, so ignore this step
3.Property Manager Forms Error FRM-40735 After Upgrade From 12.0.6 to 12.1.2 [ID 1091124.1]
did you know how to set this 1) Please set Property Manager status to "Installed" via License Manager.
I don't find this on license manager.
4.Frm-40735 Ora-04062 When Trying To Open Transactions Form [ID 1363671.1]
just checked the custom.pll and custom.plx and they are existed in AU_TOP/resource, I want to re-generated this custom.plx using this
frmcmp module=CUSTOM.pll userid=apps/apps@hostname module_type=LIBRARY
but have some issues.
[r12app@infsgvm14 resource]$ frmcmp module=CUSTOM.pll userid=apps/[email protected] module_type=LIBRARY
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
so, it's strange.
Thanks!
Chuan Ling

Problems with charts after upgrading APEX from 3.2 to 4.1

After upgrading apex from 3.2 to 4.1 the combination stacked bar/Stepline charts no longer works. Any help would be appreciated.
Thanks.

Hi "904055",
I believe the reason your chart is no longer working is because you are attempting to generate a chart type that is not covered by our AnyChart Flash charts license i.e. Stepline charts are not one of our support chart types. We only support the chart types exposed via the Application Express UI i.e. the chart types listed in the Create wizards. If you wish to create other AnyChart chart types, you will need to contact AnyChart directly, in order to obtain a separate license and swf file.
If you believe that your chart is only using chart types covered by our license, but are still experiencing issues, then please place a testcase on apex.oracle.com, post some login credentials, and I'd be happy to take a look.
Regards,
Hilary

Flash builder 4.7 upgrade issue from Flash builder 4.5 (key is not valid)

Hi,
We (Company) are buying Adobe products more than 6-7 years now. We bought the Flash builder premium 4.5 and Flash builder premium 4.5 for PHP volume licence. Now flash builder 4.7 should be complementary upgrade for us. But when we are using Flash builder 4.7 trial version and adding serial number (Flash builder 4.5 serial number), it's just not working and showing a error "key is not valid".
I chat with Adobe customer care 4 different people, they end up saying that let us transfer you to volume licence department and then chat ended. No more chat messages, I checked more than one hour and still no message.
Then I called they, it took 15 mins to connect with customer care. I picked the "upgrade" option from phone menu and then connected with a guy. After listening complete case he forwarded my call to Volume licence executive and the volume licence executive transferred it to some other guy and the other guy redirect it to some specialized person. So total 4 guys. The last guy (specialized) name was Rohit.
This guy Rohit asked me, did I buy a customer support programme (some product about $2.nn.00 )? I said no, we bought volume licenses for Flash builder premium 4.5 ( about $4000.00 ****). He said, sorry sir I can not help you in this, but I can provide you an e-mail address and you can report your concern there. I already passed my 1.5 hour in this conversation. I said okie. He gave me a case number and told me that he will send a email mentioning that email address as per my request I disconnect the phone.
I never get that email address.
Can some one suggest me what to do next. My case number is : 209-788-274.
My email is: [email protected]
Thanks,
Amitabh Arya

I have the same problem, and i have send request complementary upgrade (Adobe® Flash® Builder® 4.7 Complimentary Upgrade), and only received a Acrobat change licensed...
I´m working with 4.7 Beta the last mounths, and now all the days have to see "please enter your license". So one problem that you can jump with money (if you have that money..), isn´t a problem. Like a i have license from flex 3, upgrade to flex 4, and upgrade to flex 4.5, i´m going to take de upgrade from 4 standard to 4.7 standard (47,97 euros), and not waste my time and money on calls. So yes, I'll see adobe with another eyes...
Best regards,
José Ramón León

How can i create a link in the context help from frontpanel elements like knobs and so on

i want to create on context sensitive online help and therefore need to know how i can place a hyperlink in the context help from labVIEW of a frontpanel element

lotto;
You can place your help file in LabVIEW help directory, which should be in \help. If you place your help file in that directory, then when you start LabVIEW, you can access your help from LabVIEW's help menu (there will be an extra entry with the name of your help file.)
To link your control or vi to this help file, open the front panel (or the panel where you edit the control) and open the VI setup. In the help path field write the following:
:\name.hlp
Where "name" in the name of your help file. in the "Help Tag" field you should enter the tag you already assigned to the topic in the help at design time. (I suggest the tag to be similar as the vi or control name.)
After all this, the next time you start LabVIEW,
you should be able to access the context help file to your control or vi by right-clicking on it and selecting "Online Help".
IMPORTANT NOTE: Be aware that you may loose files you locate in special directories in LabVIEW, like the help, because those directories might be overwritten when you upgrade your software. Another option can be to locate your help file in a directory other than LabVIEW's help. The steps are almost the same, except that you won't be able to access your help file from LabVIEW's help menu.
Best regards;
Enrique
www.vartortech.com

Upgrade help from os 9.1 to 10.3 panther

Similar Messages

Maybe you are looking for