Upgrade - Installation CRM 7.0 with W2K3 and J2EE AddIn

Hi all,
Because of the end of maintance I have to upgrade CRM 4.0 to CRM 7.0.
During the upgrade phase Iu2019ve detected changes within the CRM System installation and architecture.
First thing I discover was that itu2019s not possible to install CRM 7.0 with the W2K3 64bit OS.
You have to install the system with Windows 2008 Standard 64bit Edition.
All our SAP Systems running with W2K3 64bit OS with very good performance and that is why itu2019s our standard OS.
The different between W2K3 and W2K8 is enormous. (Everyone who changed from WinXP to Win Vista knows what I mean.)
Even the change of the SAP Kernel causes yet unknown problems
But I thought so what, thatu2019s IT and upgraded the ABAP stack to 7.0
The upgrade was fine and finished.
After that I would like to install the missing J2EE Components and TREX.
But the next catch Iu2019ve discovered was that it isnu2019t possible to install the J2EE Engine as an AddIn Installation into the upgraded ABAP Engine.
Wow, thatu2019s a thing!!!!
Our company IT strategy is System consolidating and now I should make 9 out-of 3 systems.
(DEV-QS-PROD Landscape)
Not to mention the administrative complexityu2026.
Now Iu2019m searching for solutions to avoiding this problems.
For the J2EE AddIn installation I want to try a intermediate upgrade to a former CRM Release where a AdIn Inst is possible (e.g. CRM 5.0 or something) and than upgrade to CRM 7.0
But whatu2019s about the prescribed OS W2K8?
As far as I know there is no SAPinst for a CRM 7.0 Upgrade/Installation under W2K3.
Ok, for a company with a huge webshop it makes sense, but our webshop isnu2019t so big that there could be same performance problems.
As noted before, all our SAP Systems running with a W2K3 64bit OS and we donu2019t have performance problems.
Does anyone have an idea how I can solve my CRM 7.0 Inst/Upgrade Problems?
Best regards
Mario Fischer

Hi Mario,
We installed CRM 7.0 a couple of months back with DVD- 51035700 (Master) on a Win 2003 server.
NW 7.01 (base for CRM 7.0) is supported on Win 2K3...but PAM does mention 2008 exclusively for CRM 7.0
As far as the Java Add In is concerned, ABAP & JAVA stacks have been seperated in order to simplify things.
The dual stack was difficult to administer & manage; hence, now you need to install 2 different systems & connect them via JCO.
We had a 16 GB server for CRM 7.0, which instead of hosting one "ABAP+JAVA" system, now has 2 systems (a seperate ABAP system & a seperate JAVA one)..n so far we havn't faced any issues as such.
In fact it's a good thing that since the 2 stacks have been seperated, the dependancy factor's been minimized.
Thanks,
Have a nice day,
S
Edited by: Saba Sheikh on Feb 24, 2010 1:08 PM

Similar Messages

  • Changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)

    Hello
    Maybe not the best section ..
    But we have in mind changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)..
    I wander what would be pro and what cons?
    Thank you a lot
    Jan

    Hi Jan,
    If I understand correctly you are going to perform database migration activity in your present landscape. Firstly you have to contact SAP as well as one of the third party hardware vendor (who is going to provide certified HANA hardware). SAP will provide you all the license details.
    For whole your migration activity below link will be helpful:-
    SAP BW on HANA Cookbook
    Migration to HANA made easy with DMO
    Regards,
    Rafikul

  • Nforce420: How can I upgrade BIOS on a computer with NTFS and no flopp

    I have a multimedia PC in my living room hooked up to my TV and I am planning to use it as a PVR, MP3 jukebox, DVD player and photo album.
    I build this machine in a small aluminium case, with the minimum components. I chose the nForce as the platform for this machine to minimise the number of components (and noise/heat).
    I'm running Windows XP with NTFS and there is no floppy drive in this system. Do you guys have an idea about how I can upgrade the bios from 2.0 to 2.4 (or 2.6?)?
    Thanks in advance

    Well, if you have any kind of internet connection on the computer, then MSI LiveUpdate is the way to go.  I had the same problem after I didn't quite plug in my floppy right the other day -- the burning smell was exhilirating but my computer was fine.  I have only NTFS partitions too and no floppy, but with an Internet connection it was easy to update the bios.
    For some reason LiveUpdate wanted to tell me that the latest BIOS is 2.4, so if you navigate to C:\Program Files\Setup Files\MS6373v240 and replace the BIOS image files there with the 2.6 ones you downloaded, and run Winflash.exe, it will flash you to 2.6.
    Alternately you could just download all that stuff on another computer and burn a CD with it.  You could make that CD bootable or you could boot off a Win98 startup CD or something and put your CD in after the computer boots up...not really sure how well that would work.
    Winflash has worked fine for me the three times I've used it (from 2.4 to 2.5, then back to 2.4, and now to 2.6).

  • CF Installations :Key differnces between Multiserver configuration and J2EE Configuration

    Hi,
    Can anyone give the important differences between Multiserver
    configuration and J2EE Configuration installations?..

    Hello Dalibor,
    While the service account user object has Use DES selected it would appear your user session is still sending the AS Java an RC4 service ticket.  This might occur if your user had requested a service ticket before Use DES was selected, or before that setting had replicated to the appropriate domain controller.  The fix might be as simple and logging out and logging back in now that some time has passed.
    You could also download the Microsoft kerbtray utility and inspect the service ticket enc type to validate this.  kerbtray can also be used to clear old tickets and is generally useful for troubleshooting this kind of thing.
    Thanks!
    Kyle

  • When i try to upgrade iPad, i cannot proceed with terms and conditions page

    i forgot my apple ID password when i after i upgrade my ipad. So i changed reset my password online. After i entered new password, terms and conditions page appeared, however there was no response no matter what option i choose be it agree, disagree or A and B.
    maybe i accidentally disconnected my ipad with my Mac air at that time? I was not paying attention to that. now i dont konw what i can do.
    i do not know the version of the previous system. however i updated as it pompted up that there is a new update.

    Reset iPad and continue with update.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Standards in a web application with JSP and J2EE

    Hello!
    Can anyone to point me to a tutorial or an URL that contains standards for an web application with jsp(including tag libs), beans and servlets.
    Thanks
    Catalin

    on the left side of this page...there are links "Documenation", "Tutorials", "Code Samples", pick your choice...there are alot of tutorials, try some or try them all :)

  • JSP with J2SE and J2EE

    I am learning JSP from a book that is a year old. Can you tell me if the JSP for J2EE is different from that for J2SE ?

    J2SE stands for Java2 Standard Edition which is supposed to define Java standards (and API) to run day-to-day application (single user applications).
    J2EE on other hand is Java2 Enterprise Edition. Its supposed to define standards (and API) to be used to create server application that service multiple clients.
    One does not succeed the other, rather they target diffenet segments and are complementary. J2EE is more of extension of J2SE capabilities (A J2EE application will requires API defined in J2SE packages).
    JSP is part of the J2EE specification (other part being Servlets, EJB, JavaMail, JMS etc) and its supposed to have nothing to do with J2SE excepct using the latter's API in its implementation.
    What others have been trying to tell you is that JSP is part of J2EE specification but you need not know the other components of the specification to use JSP.
    Amitabh

  • Grid 12c upgrade installation seems to be stuck

    i am upgrading my stand-alone grid with ASM and it seems to be stuck running the root scripts.
    Is there any way for me to see what is going on?
    How can I see what went wrong and how can I restart this installation?
    OUI wants to go to yet another directory. Can I wipe the original directory and try again?
    Any help from anybody would be appreciated.
    TIA, Keith
    Message was edited by: KeithWilliams
    Running the script by hand I see the following and it just sits there for ever.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /app/grid/product/12.1.0/grid_1/crs/install/crsconfig_params

    HELP!

  • JAVA Upgrade from CRM 5.0 to CRM 2007

    Hi,
    I need help.  I'm trying to upgrade our CRM 5.0 to CMR2007 and encountered a problem during the JAVA Prepare Phase.
    Here is the error I received.
    The execution of  ended in error.                                                                               
    Could not load class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId.  
    com.sap.sdt.util.misc.LoaderException: Class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId not found using classpath.
    com.sap.sdt.ucp.pce.ctrl.PhaseLoaderException                          
    Could not load class com.sap.sdt.j2ee.phases.PhaseTypeDetermineSystemId.
    DETERMINE_SIDS                                                         
    INIT                                                                   
    PREPARE                                                                
    NetWeaver Upgrade                                                      
    SAPJup                                                                 
    Java Upgrade  
    Thanks,

    Hi Ramon,
    In subdirectory trc you should find a file SAPJup.TRC containing some more details on the exception that happened. Add the stack if you find it there.
    PhaseTypeDetermineSystemId is the first phase class to be loaded from package lib/sdt_j2ee.jar. So, you should check if this jar is around.
    Regards,
    Thomas

  • I have a MacPro with OSX 10.9.4 and I photo 9.5.  When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer.  Now IPhoto is just spinning and will not let me quit or Upgrade.

    I have a MacPro with OSX 10.9.4 and I photo 9.5.  When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer.  Now IPhoto is just spinning and will not let me quit or Upgrade.

    BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
    LN

  • Upgrade of CRM 5.0 abap and java

    Hi,
    I have to upgrade CRM 5.0 to CRM 7.0 with EhP1. In my system landscape, CRM 5.0 ABAP (CRA) and CRM 5.0 Java (CRJ) are installed on different servers. CRJ is a portal available for end user for which CRA is acting as backend server and database. I have experienced that when we install CRM 7.0, installer automatically creates 2 seperate instances each for abap and java. I am not able to presume what exactly will happen in this kind of upgrade. My doubts are:
    1. Will this upgrade CRA (abap) and CRJ (java) seperately on different server? and i connect them as i am doing currently (CRA being the UME for CRJ)?
    2. While upgrading CRA, upgrade tool will ask the path of CRJ and both the instance will be upgraded simultaneously. And CRJ will behave as web ui instance after upgrade.
    3. CRA will be upgraded and a new instance for WebUI will be created (let us call it CRW) and i will connect CRW with CRJ for all practical purposes? where CRJ will act as portal for CRW.
    Kindly help.
    Thanks.
    - gaurav

    Hi,
    > 1. Will this upgrade CRA (abap) and CRJ (java) seperately on different server? and i connect them as i am doing currently (CRA being the UME for CRJ)?
    Yes.  You need to upgrade both the servers separately. You need not to reconnect it as both the systems are already connected with each other.
    > 2. While upgrading CRA, upgrade tool will ask the path of CRJ and both the instance will be upgraded simultaneously. And CRJ will behave as web ui instance after upgrade.
    > 3. CRA will be upgraded and a new instance for WebUI will be created (let us call it CRW) and i will connect CRW with CRJ for all practical purposes? where CRJ will act as portal for CRW.
    >
    No, new instance will be created. You need to upgrade CRA and CRJ separately. WEBUI will be automatically upgraded.
    Thanks
    Sunny

  • After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

    After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

    Did you upgrade from SnowLeopard?
    I can't get passed the complete installation
    What exactly is happening? Is GarageBand trying to download over and over again?
    all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
    The property list stores your preferences, but also the settings from the last run of the application.  If that file is corrupted in some way, you might see third behaviour.
    You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
    Perhaps you did look in he wrong place.
    in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
    Quit GarageBand, if it is running.
    Click onto you Desktop to bring the Finder forward.
    In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
    Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
    Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
    If that does not fix the problem, post back and explain in more detail what the download problem is.
    Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
    Regards
    Léonie

  • Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

    Hello together,
    The system  of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
    In the Billing Due List a dump occurs when clicking on an item and then on conditions
    Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
    (Other classes are  new generated after the upgrade)
    During the Analysis we looked to the billing engine navigator:
    In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
    We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
    Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
    BR, Anne

    Hi Nawanit,
    we checked the key figure settings and categories. Everything is maintained correctly.
    Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
    BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
    "Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
    As far as we work with ECC 6.0, EHP4 this message makes no sense.
    Does anyone have another idea?
    Thanks
    Jan

  • Upgrade CRM 5.0 to CRM 7.0  with MS SQL 2005

    Hi,
    I am stuck with this error while working on an upgrade of CRM system.
    Any help is highly appreciated. Please let me know if you require more information.
    4 ETW000 H:\usr\sap\C7D\upg\abap\exe\R3trans.exe version 6.14 (release 701 - 05.03.09 - 08:28:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 07.04.2009 - 15:58:33
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: H:\usr\sap\C7D\upg\abap\exe\R3trans.exe -d -w H:\usr\sap\C7D\upg\abap\log\DBCONNCHK.LOG
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Tue Apr 07 15:58:33 2009                               0  0.000000
    4 ETW000  [dev trc     ,00000]  db_con_init called                                     0  0.000000
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                              0  0.000000
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dbmssslib.dll' ...                 0  0.000000
    4 ETW000  [dev trc     ,00000]  load shared library (dbmssslib.dll), hdl 0, addr 0000000186580000
    4 ETW000                                                                           21898  0.021898
    4 ETW000  [dev trc     ,00000]      using "H:\usr\sap\C7D\upg\abap\exe\dbmssslib.dll"
    4 ETW000                                                                            1090  0.022988
    4 ETW000  [dev trc     ,00000]  Library 'dbmssslib.dll' loaded                        13  0.023001
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dbmssslib.dll
    4 ETW000                                                                              17  0.023018
    4 ETW000  [dbcon.c     ,00000]  *** ERROR => Codepage mismatch between kernel (ASCII) and DBSL shared library 'dbmssslib.dll' (UNICODE)
    4 ETW000                                                                             714  0.023732
    2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
    Thank you for your time,
    One Idea

    and here dev_w0
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    A Tue Apr 07 15:19:14 2009
    A  **GENER Trace switched on ***
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 45644kb, dir_size: 22748kb.
    A  Attached to PXA (address 000007FFBDFE0050, size 650000K, 2 fragments of 302180K )
    A  abap/pxa = shared protect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    A 
    A Tue Apr 07 15:19:15 2009
    A  ABAP ShmAdm attached (addr=000007FF4CE06000 leng=20955136 end=000007FF4E202000)
    A  >> Shm MMADM area (addr=000007FF4D2AEF80 leng=247168 end=000007FF4D2EB500)
    A  >> Shm MMDAT area (addr=000007FF4D2EC000 leng=15818752 end=000007FF4E202000)
    A  RFC Destination> destination ut1vcr701_C7D_01 host ut1vcr701 system C7D systnr 1 (ut1vcr701_C7D_01)
    A  RFC Options> H=ut1vcr701,S=01,d=2,
    A  RFC FRFC> fallback activ but this is not a central instance.
    A   
    A  RFC rfc/signon_error_log = -1
    A  RFC rfc/dump_connection_info = 0
    A  RFC rfc/dump_client_info = 0
    A  RFC rfc/cp_convert/ignore_error = 1
    A  RFC rfc/cp_convert/conversion_char = 23
    A  RFC rfc/wan_compress/threshold = 251
    A  RFC rfc/recorder_pcs not set, use defaule value: 2
    A  RFC rfc/delta_trc_level not set, use default value: 0
    A  RFC rfc/no_uuid_check not set, use default value: 0
    A  RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
    A  RFC Method> initialize RemObjDriver for ABAP Objects
    M 
    M Tue Apr 07 15:19:16 2009
    M  ThrCreateShObjects          allocated 43666 bytes at 000000001DFA0050
    N 
    N Tue Apr 07 15:19:17 2009
    N  SsfSapSecin: putenv(SECUDIR=H:\usr\sap\C7D\DVEBMGS01\sec): ok
    N 
    N  =================================================
    N  === SSF INITIALIZATION:
    N  ===...SSF Security Toolkit name SAPSECULIB .
    N  ===...SSF trace level is 0 .
    N  ===...SSF library is H:\usr\sap\C7D\DVEBMGS01\exe\sapsecu.dll .
    N  ===...SSF hash algorithm is SHA1 .
    N  ===...SSF symmetric encryption algorithm is DES-CBC .
    N 
    N Tue Apr 07 15:19:18 2009
    N  ===...completed with return code 5.
    N  =================================================
    N 
    N Tue Apr 07 15:19:20 2009
    N  MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
    N  MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
    M  JrfcVmcRegister in process-driver OK
    M  JrfcVmcRegisterNativesDriver o.k.
    W  =================================================
    W  === ipl_Init() called
    B    dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
    B     max_blocking_factor =  50,  max_in_blocking_factor      = 255,
    B     min_blocking_factor =   5,  min_in_blocking_factor      =  10,
    B     prefer_union_all    =   1,  prefer_join                 =   1,
    B     prefer_fix_blocking =   0,  prefer_in_itab_opt          =   0,
    B     convert AVG         =   1,  alias table FUPD            =   0,
    B     escape_as_literal   =   0,  opt GE LE to BETWEEN        =   0,
    B     select *            =0x00,  character encoding          = STD / []:X,
    B     use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
    B                           rule_fae->0, concat_fae->0, concat_fae_or->0
    W    ITS Plugin: Path dw_gui
    W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
    W    ITS Plugin: sizeof(SAP_UC) 2
    W    ITS Plugin: Release: 700, [7000.0.185.20050900]
    W    ITS Plugin: Int.version, [33]
    W    ITS Plugin: Feature set: [19]
    W    ===... Calling itsp_Init in external dll ===>
    W  === ipl_Init() returns 0, ITSPE_OK: OK
    W  =================================================
    E  Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ut1vcr701_C7D_01
    E 
    E Tue Apr 07 15:19:21 2009
    E  Replication is disabled
    E 
    E Tue Apr 07 15:19:22 2009
    E  EnqCcInitialize: local lock table initialization o.k.
    E  EnqId_SuppressIpc: local EnqId initialization o.k.
    E  EnqCcInitialize: local enqueue client init o.k.
    C 
    C Tue Apr 07 15:19:59 2009
    C  The IRow interface is supported by this OLEDB provider
    A  **GENER Trace switched off ***
    M  SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
    B  table logging switched off for all clients
    M 
    M Tue Apr 07 15:20:48 2009
    M  SecAudit(RsauShmInit): WP attached to existing shared memory.
    M  SecAudit(RsauShmInit): addr of SCSA........... = 000000000B040050
    M  SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000B0407C0
    M  SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000B040800
    M  SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000B04080C
    M  *** ERROR => SosIAnchorArrayCreatable: T21/M0 in state cancel [thxxtool2.c  947]
    A 
    A Tue Apr 07 15:21:15 2009
    A  GENER starting remote generation: SAPLSLO2 (requested by W4).
    A 
    A Tue Apr 07 15:21:20 2009
    A  RFC FRFC> fallback on the central gateway ut1vcr701 sapgw01 activ
    B 
    B Tue Apr 07 15:23:35 2009
    B  dbslj: kernel version 20050900, java version 20050900
    S 
    S Tue Apr 07 15:24:34 2009
    S  found spool memory service RSPO-ACTIONS at 00000000317CA470
    M 
    M Tue Apr 07 15:38:42 2009
    M  rdisp/rb_cleaned_rfc = 0
    M 
    M Tue Apr 07 15:39:01 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T21/M0 in state cancel [thxxtool2.c  947]
    M 
    M Tue Apr 07 15:58:35 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T23/M0 in state cancel [thxxtool2.c  947]
    M 
    M Tue Apr 07 16:14:35 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M 
    M Tue Apr 07 16:15:13 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M 
    M Tue Apr 07 16:17:38 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    A 
    A Tue Apr 07 16:19:30 2009
    A  GENER request remote generation: SAPLSUGG.
    M 
    M Tue Apr 07 16:19:33 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M 
    M Tue Apr 07 16:19:35 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M 
    M Tue Apr 07 16:19:36 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]
    M 
    M Tue Apr 07 16:26:01 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T21/M0 in state cancel [thxxtool2.c  947]
    M 
    M Tue Apr 07 16:26:45 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T21/M0 in state cancel [thxxtool2.c  947]
    A 
    A Tue Apr 07 16:26:49 2009
    A  GENER starting inline generation: RSUPDTEC (reason: explicit generation).
    M 
    M Tue Apr 07 16:34:30 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T22/M0 in state cancel [thxxtool2.c  947]

  • Upgrade from CRM 4.0 to CRM 7.0 and disconnect mobile sales

    Hi
    With CRM 7.0 we want to utilize the web UI and stop using Mobile Sales. This means we will no longer need the comms station or workbench machines.  Assuption is that with links to EEC6 from CRM 7.0 we no longer need to download sales orders and that CDB is redundant so mobile bridge can be turned off..
    Has anyone done this before ? Do we need to be aare of anything ?
    Best Regards
    M

    Hi,
    we are also plan to do the same - replace CRM 4 MSA with CRM 7 Web UI. Technical Topics are more planning and checking: How does the User access the Solution (Netbook and UMTS), global availability, closing Mobile Bridge and deleting CDB Tables, check your Z Reports - some Developer used smo Tables which are not updated after the Upgrade. Plus Organizational challenges: With MSA you could do Rolloutwaves - Now for Example Frday Evening shut down all MSA User -> Monday morning All Users Go Live with CRM Web UI. This has to be handled (incl. deinstall/disable of TS Mobile) incl. Training and Support effort
    Hope that helps for the Start
    Andreas

Maybe you are looking for