Upgrade internal hard drive on MacBook Pro (1,1)

Can I upgrade my 15" MacBook Pro (1,1)2.16ghz Intel Core Duo to the 200GB(7200rpm) or 250 (5400rpm) internal hard drive? Is there a significant difference in the speed between the two. Does Apple sell them? Or are they third party?
Thanks for any help.

you sure can.
look at either newegg or otherworldcomputing
you don't have to buy from Apple - they don't make hard drives.
here are install videos:
http://eshop.macsales.com/tech_center/installation.cfm

Similar Messages

  • What are the things required to upgrade internal hard drive For Macbook Pro mid 2012 13 inch?

    Hi,
    I want to upgrade my internal drive but I don't know how to do that. I have already purchased a WD 1TB internal hard drive. However, I contacted apple support and they said if I try to upgrade the hdd myself, then the warranty of the macbook would be void. I am from India . I currently have a Macbook Pro mid 2012,13 inch.
    Also, do i need to download a setup of Yosemite before changing the hdd?
    Please guide me
    Thanks and Regards
    Abhineet Arora

    You know what the impact will be on the warranty terms.  If you want to install it yourself, look at this video:
    http://eshop.macsales.com/installvideos/macbookpro_13_unibody_mid12_hd/
    It is not very difficult.  You will need a #00 Phillips and a #6 Torx drivers.
    Ciao.

  • PLEASE HELP me select new internal hard drive for Macbook Pro 2012 (non-retina)

    Good afternoon.
    I just bought a Macbook Pro 2012 (non-retina) 15 inch from a friend.  I think it is running Mountain Lion (has not been upgraded to Mavericks yet), and has iLife on it.  It came with the stock 500 gb 5400 rpm internal hard drive.  At home, I only have the Snow Leopard OS installation Cds and a copy of iLife 2011 installation Cds.  I am going to buy 16 gb of RAM from Other World Computing to install.
    I want to replace the hard drive with a 1 tb hard drive, preferably something that is $100 or less.
    I talked to Other World Computing (OWC) and looked at the Data Doubler Option to replace the optical drive with a Solid State drive, but decided that for now I want to keep the optical drive inside the computer for portability issues.
    I know that Solid State drives are better, but they are still too small, and I want the ease and portability of a 1 tb size INSIDE my computer.
    Initially I was going to order this from Other World Computing: 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s 9.5mm Notebook Drive 32MB Cache. *'New' Factory Replacement with 2+ Year HGST Warranty*    As of April 4, 2014 it's on sale for $79
    But then I started reading some of the discussions online and thought maybe I should get a hybrid solid state drive?
    I saw on Amazon the Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch ST1000LM014  It's on sale for $94.
    But according to some reviews, this Seagate has a platter that is only 5400rpm, unlike the previous Seagate Momentum that has a platter speed of 7200rpm.
    How reliable are the Seagate, versus a Toshiba or Western Digital or Hitachi or something else?
    Here are my questions about replacing the hard drive:
    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    I would love to get some recommendations about the smartest option to upgrade my hard drive with something that will be fast (I edit lots of photos) and large (1 tb) that isn't going to cost too much.  I don't know much about the different brands or options (and there are so many listed in tons of online reviews), that I got really overwhelmed and confused by the info out there.
    I would really appreciate any help and advice.  I've never switched out a hard drive before.
    PLEASE HELP !!!  Thanks!
    Here is the "About this Mac" Info:
    Macbook Pro 15-in Mid 2012
    Model Identifier: MacBookPro9,1
    Processor: 2.3 GHz Intel Core i7
    Memory: 4 GB 1600 MHz DDR3
    Software: OS x 10.8.5
    Storage (Hard drive): APPLE HDD ST500LM012 Media, Rotational, SATA, GPT (GUID Partition Table)

    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    The boot drive, regardless of what it is, needs to be formatted as Mac OS Extended (Journaled).  This is standard with OS X.
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    There are arguments pro and con.  Bottom line, SSD's and hybrid drives are still quite expensive per GB than standard hard drives.  If you have the bucks and are a speed demon, go ahead.   I have better use for my money.   Standard hard drives are mechanical and may wear out over time.  But even though SSDs are not mechancial, they can still go bad and ultimately they even have a limit to their write capacity.  The jury is still out on this debate.
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    No
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    You can physically put the hard drive in but probably not install Snow Leopard on this MBP.
    The mid-2012 MacBookPro9,1 models came with Lion 10.7.3 (11D2097) preinstalled.   It is very unlikely you would be able to install Snow Leopard on it.  Historically you cannot install a version of OS X that is earlier than the version that came with your Mac (even if you replace the hard drive).
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    Not via Snow Leopard on this MBP.  See my response to #4.
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    No.  They are completely independent of each other; they are just independent storage units (drives) and their RAM does not interact.

  • I need RAM and Internal Hard Drive help Macbook Pro 17inch

    It's about time for me to max out the ram and buy another internal hard drive for my 17 inch Macbook Pro. I use photoshop and final cut pro X on a regular basis and my Macbook is starting to slow down and is low on memory. These were the two recommendations that I got from a live chat agent on OWC. Just wondering were these recommendations good...if so I'll go ahead and purchase them now. Any help is appreciated.
    Specs for my Macbook Pro
    2.66hz
    4GB Ram
    250GB HD
    Model Identifier is MacBook Pro5,2
    Mac OSX Maverick
    Recommendations from Agent:
    HD
    http://eshop.macsales.com/item/Seagate/ST1000LM014/
    http://eshop.macsales.com/item/Toshiba/MQ01ABD100H/
    Ram
    http://eshop.macsales.com/item/OWC/8566DDR3S8GP/

    Good choices, though a true SSD would be faster overall, though more expensive. That same drive is a lot cheaper on Amazon though.
    http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ/re f=sr_1_1?ie=UTF8&qid=1395060904&sr=8-1&keywords=seagate+1tb+hybrid

  • Internal Hard drive for macBook pro 13 inch.

    Hello everybody :")  
    How are you? I hope that everyone is fine.
    I have come today  i need your opinion and your advice to me about my (HDD)
    i need to buy new HD for my book pro .
    Can you answer my questions and give me advice
    frist i will write for you my MBP information :
    MacBook Pro 13 inch - 4 GB  memory -  the old HD is  320 GB 5400 rpm - Processor i5 dual core .
    made in 2010
    * note :Almost i'm not interested in (SSD)  because the price is expensive SSD  to storage capacity that can i give it .
                   HDD  was excellent with me .
    -What are the types of HDD which advise me?
    - what best HDD for macbook pro ? ( toshiba or WD )
    - how I choose from among types of HDD ?
    -How do I know what types are compatible with my device? Is there site or previous experience advise can help me !
    What your opinion  about this kind:
    Seagate Momentus XT 750 GB 7200RPM
    are good for my MBP ?
    I care about the quality, performance and  more than speed.
    Thank you in advance
    I hope to help me soon

    Di.grad 
    toshiba 1.tb and 7200 RPM ?
    Those are same as use by Apple in the non-retina macbook Pro, Ive got piles of them, only a Hitachi is better.
    Toshiba HD are a hair noisy even by Toshiba own admission, but no big deal.
    I would NEVER buy from OWC merely for the reasons that their prices are miserable.
    Here you go,   $65
    http://www.ebay.com/itm/TOSHIBA-MQ01ABD100-1TB-5400-RPM-8MB-Cache-2-5-SATA-3-0Gb -s-Internal-Notebook-/121107538930?pt=US_Internal_Hard_Disk_Drives&hash=item1c32 9263f2
    same as used by APPLE in their own.

  • How to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?

    Hello,
    I wonder if you can please help me out.
    I wonder, is it possible to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?
    Thanks,

    There's only one 9.5mm high 1tb drive around http://eshop.macsales.com/item/Samsung/HNM101MBB/
    With a video on replacing the hard drive http://eshop.macsales.com/installvideos/macbook_13_mem_hd/

  • How to replace hard drive in macbook pro?

    How to replace hard drive in macbook pro?

    Hi S,
    If you have the newer unibody style, it's very easy. If it's one of the earlier models, it's considerably more difficult. Go to Apple Menu > About This Mac > More Info > Hardware and find your Model Identifier. Then go to ifixit.com, or powerbookmedic.com or macsales.com or youtube or others and there are illustrated, detailed directions. Good luck to you and post back if you have further questions.

  • What is the best external hard drive with MacBook Pro

    What is the best external hard drive with MacBook Pro?

    I agree with Allan, and that link is also called OWC, their hard drives are great.  Have three of their Mercury Pro Elite 2 TB quad interface drives.  They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options.  Drives seem to come Mac HFS formatted, but I always reformat and partition the drives.  Service and quarantees are top notch.
    They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

  • How to view windows Xp formatted hard drive with Macbook pro without losing data

    How to view Windows Xp programed Hard drive with Macbook pro with out losing data on hardrive

    Go to the First Aid tab in Disk Utility, select the external drive partition and read the format from the lower left, at the bottom.

  • When I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?

    when I connect an external hard drive to macbook pro it is very slow to appear on the desktop and Finder window, sometimes 20 mins or more, even with auto backup switched off . any clues?

    Hi robfromkinglake west,
    Try and isolate the issue.  Check if it's only with this drive.
    Check the drive with Disk Utility
    Using Disk Utility to verify or repair disks
    http://support.apple.com/kb/ht1782
    I've never seen a drive take 20 minutes to mount.
    Nubz

  • Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

    Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

    Firewire 800 is the fastest and most reliable. Also it's bootable if you hold the option key down on a wired or built in keyboard.  Not bootable via Airport obviously or if Filevault is used.
    It's only your first clone that's usually takes the longest, it's shorter when it updates as you only do the changes which you can control to keep a pure clone if you wish.
    Most commonly used backup methods

  • After upgrading hard drive on MacBook Pro, Premiere will no longer open

    I just upgraded the internal hard drive on my MacBook Pro (mid-2010, unibody), OS 10.8.2, with an NVIDIA GeForce GT 330M 512 M Graphics card.
    I've been running Premiere Pro CS5, and then CS6, on the machine without any problems until I upgraded the hard drive (to a new Seagate Momentus XT SSHD 750GB).
    Now, when I load Premiere Pro, I get the following error message: "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
    I've tried everything I can think of, including resetting preferences, and what they suggest here: http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html (I installed the latest CUDA driver, and my GPU driver is up to date; I am already set up as Admin on my computer).
    Another thing I did was go into Terminal and ran GPUSniffer. That was what worried me - it seemed to suggest that the card is not functioning, but I don't know if that means it's not functioning at all or not functioning in ways that Premiere can work with. Any advice? I'm tempted to open it back up and re-install the original hard drive, except that new one is making most other things noticably faster. Booting, opening and closing apps, etc.
    Here's the message I got when I ran GPUSniffer:
    --- OpenGL Info ---
    2012-12-15 16:03:27.492 GPUSniffer[1310:707] invalid drawable
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GT 330M OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-8.0.61
    GLSL Version: 1.20
    Monitors: 1
    Monitor 0 properties -
       Size: (0, 0, 1440, 900)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 1
       Shaders 420: 1
    --- GPU Computation Info ---
    Found 2 devices supporting GPU computation.
    CUDA Device 0 -
    Caught structured exception!Full test failed, trying 444 shaders only
    --- OpenGL Info ---
    2012-12-15 16:03:27.522 GPUSniffer[1310:707] invalid drawable
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GT 330M OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-8.0.61
    GLSL Version: 1.20
    Monitors: 1
    Monitor 0 properties -
       Size: (0, 0, 1440, 900)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 0
       Shaders 420: 0
    --- GPU Computation Info ---
    Found 2 devices supporting GPU computation.
    CUDA Device 0 -
    Caught structured exception!Minimal test failed, trying CPU only
    --- OpenGL Info ---
    2012-12-15 16:03:27.547 GPUSniffer[1310:707] invalid drawable
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GT 330M OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-8.0.61
    GLSL Version: 1.20
    Monitors: 1
    Monitor 0 properties -
       Size: (0, 0, 1440, 900)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 0
       Shaders 422: 0
       Shaders 420: 0
    --- GPU Computation Info ---
    Found 2 devices supporting GPU computation.
    CUDA Device 0 -
    Caught structured exception!CPU only test failed

    It looks like I've solved my problem.
    I decided to try again - this time cloning my original drive onto the new one instead of using Time Machine - and now everything seems to work just fine. Just faster. I can only assume that in the restoration process the first time, some necessary files got corrupted or went missing. Thanks, Bill, it was your question that made me wonder whether it might be better to create an image.

  • Upgrade Hard Drive in Macbook Pro

    Have a 17" Macbook Pro with a 500 GB drive. Only have 1.3 GB available. Running vmware (Windows XP service pack 2) and Leopard.
    Is there a slot to add a second hard drive internally? Or can we replace with a 1 TB or larger drive?

    The built-in optical drive can be replaced with a special caddy that holds a second internal hard drive:
    http://www.mcetech.com/optibay/
    The Apple-specified maximum height for an internal hard drive in a MBP is 9.5mm, and the only currently available 2.5" hard drive larger than 500GB is a Western Digital 750GB drive that is 12.5mm high. WD has announced, but not released, a 12.5mm high 1TB drive.
    There is one vendor who offers to install the 750GB WD drive in any unibody MBP regardless of the height limitation, without saying whether any modification of the computer or the drive is required:
    http://www.9to5mac.com/750GB-MAcBook-Hard-drive-12-5mm
    http://www.myservice.com/harddrives.html
    If the drive can be installed without any modification, there's no reason you couldn't do the job yourself and save a bundle of money.

  • Using time Capsule to replace new hard drive on MacBook Pro?

    I am replacing the internal hard drive on my MacBook pro (early 2008).  I have a time capsule that I would like to use to restore the entire back-up on the time capsule to the new hard drive.  What is the procedure to do this?  Thanks.

    First, prep the new drive:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    Second, install Snow Leopard on the new drive.
    Third, after Snow Leopard starts for the first time you will be in the Setup Assistant. When you complete the registration you will be presented with the options for continuing or restoring from a TM backup or another Mac. Select the TM option and restore your data.

  • Upgrade Internal Hard Drive and Time Machine runs first back up as new full

    I recently upgraded my internal hard drive on my macbook to a larger and faster model, my old one is still fine. I went to run a Time Machine back up and it starts a new back up even though its not supposed to. How do I get it to recognize the old / original back up instead of running a new full back up on the new internal hard drive?

    William Beede wrote:
    In my case I backed up my old internal hd to my new external 1 TB hd.
    Surely you mean you used +Setup Assistant+ or +Migration Assistant+ to transfer the data? Or a "clone" via CarbonCopyCloner, SuperDuper, or Disk Utility?
    Now it appears TM wants to ADD the contents of my new internal hd to those already backed up(another 220 gb).
    Yes. As posted, to TM it's a new, different drive. TM will back it up. You cannot prevent it.
    I wonder if I need to format the new drive and start over??
    Yes, that's probably your best bet.

Maybe you are looking for

  • New G5 DEAD after two days

    I have a DP 2.3 G5 and a 23" CD and it worked fine for two days. Was running 2.5 Gigs of RAM, working great. Yesterday while running iTunes and a few other things the 23" CD went to sleep, though the music continued to play. I moved my mighty mouse t

  • Operation level Component Assignment

    In MTO scenario with VC and Engineering, the sales order specific engineering BOM is derived through VC and around 80% complete at the time of sales order creation. Engineering activities are carried out and sales order specific production BOM is der

  • Graphical issue with QuarkXPress

    Hi I have an early 2008 24" iMac. I recently had an issue with QuarkXPress 8 that I never had before. When I launch the app it takes a huge amount of time (as usual) but at a point a "curtain " of coloured pixels goes up to down of the whole screen a

  • Read system datasource  in the moment  "action success"

    Hi all, For example i have a goods receipt po form open with data.I push add button.Its posible to read from the datasources(OPDN,PDN1) of form in the moment of the action succes. What is the best way to obtain the head and lines data of the created

  • FUNCTION MODULE "GUID_CONVERT"

    I want to use the function module "guid_convert" in my program. But Pop up is showed up. It say that "this module is abolished. please don't use this function module." I am looking for another function module. But I can't find it. I want to convert i