Upgrade IOS for Router 1721 & 2651

Hi,
I want to upgrade IOS for Router 1721 & 2651, the version is lastest version - 1 (i.e. N-1).
what's the version and memory need?
Please kindly put the cisco reference link.
Thanks a lot!
Samuel

Hi
You need to give more details then just the model no. like the output of "show version" etc.
Anyway you can view about it at following link.
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Just to remind that to download the IOS you need to have a Partner/CCIE login.
Hope that helps
Pls rate helpful posts.
Regards
JD

Similar Messages

ITunes suggested to upgrade iOS for my iPodtouch but couldn't upgrade and asks to restore the iPod. But it doesn't restore also and gives error (1). Pl help.

iTunes suggested to upgrade iOS for my iPodtouch but couldn't upgrade and asks to restore the iPod. But it doesn't restore also and gives error (1). Pl help.

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

May i know is there any upgrade ios for 2g ipod mc model ?

Hi,
i am having an ipod 2g mc model
may i know are apple developers have any plans for older ipod touch, upgrading ios ? trade in ?
currently now this ipod touch isnt capable to play games that are popular with other latest ipod touch/iphone
Its right now a piece of metal that has limit usage
I bought this 2 yrs ago
pls provide me with advices with my current issue , apple ??

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 6.1.x
iPhone 4S                                    iOS 6.1.x
iPhone 5                                      iOS 6.1.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 6.1.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 6.1.x
iPad 3                                          iOS 6.1.x
iPad 4                                          iOS 6.1.x
iPad Mini                                     iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

HT1349 How do I upgrade ios for iPad to use for direct tv and netflix?

I would like to upgrade my ios for my iPad but don't know how. I have checked my apps and cannot locate an upgrade. I would like to see netflix and other online stuff. Please advise

You need to upgrade the iOS using the latest version of iTunes on a computer. You connect the iPad to the computer, launch iTunes, click on the iPad name under the devices heading on the left, then click on the Check for Update button in the Summary Pane of the iTunes window on the right.
More details here.
http://support.apple.com/kb/HT4623

Upgrading iOS for an US-iPad while living in Germany?

Hi,
are there problems to expect by upgrading iOS on an iPad2 which is bought in the USA while I live in Germany (german Appstore, german iTunes)?
Greets,
Jens

No

How to upgrade IOS for WS-C4506-E switch

Hi,
We are having Cisco WS-C4506-E switch running on old IOS. we need to upgrade IOS of this switch.
Can anyone please tell me how to upgrade Cisco 4500 series switches ?
Show module information as below -
Chassis Type : WS-C4506-E
Power consumed by backplane : 0 Watts
Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1     6 Sup 7L-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7L-E
2    48 10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E
3    48 10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E
4    48 10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E
5    48 10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E
6    48 10/100/1000BaseT UPOE E Series         WS-X4748-UPOE+E
M MAC addresses                    Hw Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
1 0006.f609.4d40 to 0006.f609.4d45 1.1 15.0(1r)SG3 03.03.00.SG      Ok
2 0006.f6da.7c50 to 0006.f6da.7c7f 1.1                               Ok
3 4403.a78f.f94c to 4403.a78f.f97b 1.1                               Ok
4 0006.f671.13d0 to 0006.f671.13ff 1.1                               Ok
5 b0fa.ebca.7d70 to b0fa.ebca.7d9f 1.1                               Ok
6 0006.f699.ad84 to 0006.f699.adb3 1.1                               Ok
We want to upgrade to 03.04.00.SG .

Hello, Please see Cisco documentation: Upgrading Software Images on Catalyst 4000/4500 Series Switches
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/27848-179.html
hth.
Edited: Please be aware that several recent releases of the 4500 code ignores the startup config and goes to ROMMON once you have upgraded, fix this by sorting the configreg.

Upgrade IOS for switch 2924

hi,
a switch 2924 ver 11.2 need to upgrade the IOS.
How to check a suitable version?
Thanks!
Samuel

Sam,
Depending upon what kind of 2924 you have, the IOS Version will differ.
For example:
Catalyst 2900 XL 4-MB switches run original edition software and do not support the 12.0(5)WC15 releases.
The 4-MB models are WS-C2908-XL, WS-C2916M-XL, WS-C2924C-XL, and WS-C2924-XL. These switches can only be upgraded up to Cisco IOS Release 11.2(8.10)SA6
So, if you have one of the above models, the latest version is 11.2(8.10)SA6
If you have 8-MB Catalyst 2900 XL switches and 16-MB Catalyst 2900 LRE XL switches, then you can upgrade them to 12.0(5)WC15.
Please refer the "Hardware Requirements" in the below URL for details:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/2935wc15/ol256211.htm#wp84866
So, do check the amount of memory (4MB or 8MB) on the switch and then download the appropriate version.
I hope it helps.
Regards,
Arul

Upgrading IOS on router - not enough space

Hi,
I need to upgrade the IOS on an 878 but there's not enough space to hold both images on flash at the same time - what's the best way to go about this? I've read somewhere that you name the new image the same as the old and overwrite, but I'm not sure if this is right. Also the less risk involved the better!
Many thanks,
J

That's a new one to me. Certainly doesn't reduce your risk and if you ask me it's safer to delete your current IOS file and upload your new one. For more safety, you can add the USB flash device with the new image.
http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html
Hope that helps.

HT4972 upgrading ios for the ipod touch

Does any one have an idea of how to upgrade from iOS 4.2 with my iPod touch. I'm unable to upgrade to any higher version. When I try it ITunes says it's already up to date. I've tried many on line suggestions and I'm so frustrated. I've even manually downloaded iOS 4.2 and tried to "force" the upgrade to no avail. Any help would be appreciated.
Kris

You don't have a 3 or 4G of the Touch. Earlier versions cannot be upgraded to iOS 5.

I need find IOS appropriate router 1841

I need upgrade IOS on router 1841 , but new IOS 12.4T size Over memory (our Memory 32M), someone help me find IOS
appropriate for upgrade
* I download version c1841-adventerprisek9-mz.124-25g.bin , but i not sure it use with our router
i have show version
Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 12.4(9)T7,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 10-Jan-08 15:41 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Thaitech-pattanee uptime is 4 days, 1 hour, 11 minutes
System returned to ROM by reload at 10:57:40 WAST Thu Oct 9 2014
System restarted at 10:59:00 WAST Thu Oct 9 2014
System image file is "flash:c1841-adventerprisek9-mz.124-9.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected]
Cisco 1841 (revision 7.0) with 354304K/38912K bytes of memory.
Processor board ID FHK123821SF
2 FastEthernet interfaces
1 ATM interface
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
31360K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Thank
Best regards
Sompon

hi
i need features adventerprisek same old IOS and i can't buy either memory , i need upgrade for solve internet ,
you have IOS recommend me ?
regards
Sompon

Need info about the IOS for 4503

Hi There,
we are running a cisco 4503 with bootflash:cat4000-i5s-mz.122-20.EW4.bin IOS on that, we are informed to upgrade the IOS on that. However, no info on which IOS has to be deployed on that. Hence, can some one please suggest the latest and upgraded IOS for the Cisco 4503 switch.
The memory details are below
Switch# Show verion
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I5S-M), Version 12.2(20)EW4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Fri 13-Oct-06 11:35 by tinhuang
Image text-base: 0x00000000, data-base: 0x011F879C
ROM: 12.2(31r)SG2
Dagobah Revision 226, Swamp Revision 34
PT_HE_Main_110.254 uptime is 4 weeks, 1 day, 18 hours, 33 minutes
System returned to ROM by reload
System restarted at 17:10:55 IST Mon Feb 24 2014
System image file is "bootflash:cat4000-i5s-mz.122-20.EW4.bin"
cisco WS-C4503 (MPC8245) processor (revision 4) with 524288K bytes of memory.
Processor board ID FOX103809BG
MPC8245 CPU at 400Mhz, Supervisor V
Last reset from Reload
156 Virtual Ethernet/IEEE 802.3 interface(s)
98 Gigabit Ethernet/IEEE 802.3 interface(s)
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Switch # dir
Directory of bootflash:/
1 -rwx 11343796 Dec 5 2006 11:28:14 +05:30 cat4000-i5s-mz.122-20.EW4.bin
59244544 bytes total (47900620 bytes free)
Switch #
Thank you
Peter

Latest and greates IOS selection menu can be found here.
Make sure you take the time to read the Release Notes.

3750X iOS license required for routed ports

Hi all,
I've been tasked with installing our new Internet router. I have a stand-alone WS-C3750-24P-L with LAN base. I need a routed port to establish connection with our ISP. I've purchased IP Base licensing and applied it, and copied the ipbase iOS to flash, but I get "Error: hardware not supported by firmware. Try loading never software instead." on boot.
Is my process faulty? Am I not understanding the requirements necessary for routed ports? Or do I simply need a newer iOS version? I'm using 122-58.SE1.
Sorry for the basic question, and thanks in advance for any help you can provide.
Len

Are you sure that you loaded the right IOS (hopefully you didn't upgrade your switch with an iOS ... )? In the title you write about an 3750X, but in the text you mention a (to my knowledge non-existent) non-X model. Please show the exact filename that you downloaded and also a "show version".
And the 3750-X with IPBase supports routed ports.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Issue when update ios for 7206 router

hi all ,
the ios on router was 12.4
i put the ios
c7200p-adventerprisek9-mz.152-4.M5.bin
in disk2 , of router
and added
boot system flash disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin
after that ,
i restarted the router
i have the followign logs :
7200Gateway#reload
Proceed with reload? [confirm]
*Jan 11 15:24:11.469: %SYS-5-RELOAD: Reload requested by m0ulngateway on console. Reload Reason: Reload Command.
*Jan 11 15:24:11.681: %BGP-5-ADJCHANGE: neighbor 213.244.66.77 Down Peer closed the session
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ################################################################################################################################# [OK]
%SYS-6-CLOCKUPDATE: System clock has been updated from 15:26:31 UTC Sat Jan 11 2014 to 17:26:31 Israel Sat Jan 11 2014, configured from console by console.
% No interface specified for interface_command
X121 address and queued type can not be configured on the same rotary group 1
%SYS-3-IMAGE_TOO_BIG: 'disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin' is too large for available memory (46143512 bytes).
%SYS-6-READ_BOOTFILE_FAIL: disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin File read failed -- Not enough space.
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
boot of "cisco2-C7200" using boot helper "bootflash:c7200p-kboot-mz.124-4.XD5.bin" failed
error returned: File read failed -- Not enough space
loadprog: error - on file open
boot: cannot load "cisco2-C7200"
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Socket jumper: not present Failsafe jumper: present = normal
FPGA revision 0x00000026
C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : ########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
*** No sreloc section
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Installed image archive
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Warning: The CLI will be deprecated soon
'enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Please move to 'enable secret <password>' CLI
max-reserved-bandwidth 95
   ^
% Invalid input detected at '^' marker.
Press RETURN to get started!
============================
focusing on the red lines above .
is there ANY THING WRONG ?????
AFTER THat i have sh ver :
7200Gateway#sh version
Cisco IOS Software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Fri 13-Sep-13 19:12 by prod_rel_team
ROM: System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)
7200Gateway uptime is 10 minutes
System returned to ROM by reload at 17:24:07 Israel Sat Jan 11 2014
System image file is "disk2:/c7200p-adventerprisek9-mz.152-4.M5.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 7206VXR (NPE-G2) processor (revision A) with 1966080K/65536K bytes of memory.
Processor board ID 13252317
MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2
6 slot VXR midplane, Version 2.0
Last reset from power-on
PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.
1 FastEthernet interface
3 Gigabit Ethernet interfaces
2045K bytes of NVRAM.
250880K bytes of ATA PCMCIA card at slot 2 (Sector size 512 bytes).
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
=====================
focus on bold line ,
did the router get the new iso without problems ????
wish to clarify
regards

You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
You may download bootstarp image for 7206VRX NPEG2 from the link below:-
http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
If you want to know the procedure of the upgrade, click the link mentioned below:-
http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
-Amant

HT4623 By updating my iphone 4 by IOS 6 the map is not working when i ask for route between places it gives direction not found between places

I have updated my IOS to IOS 6 of my iphone 4.
When i ask for route between two famous places, it gives reply that direction not found between places.
I dont understand
Whats this

I had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged....

Get IOS upgrade alerts for vulnerabilities

Hi Guys,
I want to check with you guys if we can get an email from Cisco stating what model of the switch/router needs to be upgraded the IOS for latest vulnerability issues? I know we can search these up but it can be quite hard to search online. If we can get a notification (via email) from Cisco about some vulnerability that some model needs to be addressed immediately that would be great.A very good example would be the heartbleed issue recently.
If you guys know where can i subscribe to these emails from Cisco about vulnerability, please do tell me. At least it will keep me and my equipments free from vulnerability
Cheers,
Benny

There are several methods of doing this.
1. Have you heard of Cisco Notification Service?
2. Have you tried RSS?
If you want to receive RSS feeds from Cisco Security Advisories, Responses, and Notices then the RSS address HERE.
If you want to receive RSS feeds from Cisco Security Notices then the RSS address HERE.

Upgrade IOS for Router 1721 & 2651

Similar Messages

Maybe you are looking for