Upgrade iPad 2 to IOS 7.1.1 error
After upgrade my iPad 2 to IOS 7.1.1 update, on the screen shows the apple icon and I can't get the device to open
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
Similar Messages
-
After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
When we can upgrade ipad mini to ios 7 ?
when we can upgrade ipad mini to ios 7 ?
The general public will be able to sometime this fall. Apple employees and registered developers can now.
(84223) -
Is there a way to upgrade IPad 1 to iOS 6?
My iPad 1 running on iOS 5.1.1. My applications are frequently crashing. Is there a way to upgrade IPad 1 to iOS 6?
None of us are going to argue with you, but hardware changes, and more rapidly these days. The original iPhone doesn't run very much at all, and of course it can't even run 3G. But some people are happy with it. Non-Intel Macs can't run the latest OSX.
Apple needs to be competitive by making the fastest and most modern tablet it can, and that means within 3 or so years what I have now could be antiquated. That also means Apple has to make a decision about whether to try to force the operating system to continue to be backwards compatible which may have speed issues, for example, for those who have current hardware.
iOS 5.1.1 is very advanced. It's only really missing a few things from iOS 6.1, some of which a LOT of people don't like. Maps is one. The loss of Google Maps is another.
There is nothing you can do. Most Apps don't let you update if it is incompatible with your current iOS, so you should be all right. -
Upgraded iPad 2 w/IOS 7. Battery drains to 0% even with iPad in sleep mode. Called Apple-they had me clear it. Battery charge held that night. Restored from iCloud. Charge not holding again. Any similar events? What to do?
Upgraded iPad 2 w/IOS 7. Battery drains to 0% even with iPad in sleep mode. Called Apple-they had me clear it. Battery charge held that night. Restored from iCloud. Charge not holding again. Any similar events? What to do?
-
HT4097 i cant restore and update my ipad 2 to ios 6 it says error (3194) help please
i cant restore and update my ipad 2 to ios 6 it says error (3194) help please
Check your HOSTS file and make sure you are not blocking gs.apple.com.
Try to launch https://gs.apple.com: It should open the Apple site, and not be redirected to the Cydia server.
if this redirected to cydia server then
copy hosts file from this path
C:\Windows\System32\drivers\etc\hosts
paste on desktop. open this in notepad.
add this line in the last .
#74.208.10.249 gs.apple.com
in some case this line is there without " #" sign. if this line is there then u simply put" # " at the start of this line
save this and copy this file and past into this path.
C:\Windows\System32\drivers\etc\
replace with existing . yes.
close and then start the restore process.
now this will work. Insha Allah. -
Upgrading iPad 2 to iOS 8 Successfully
I thought that I'd report on the method that I used to successfully upgrade my iPad 2 to iOS 8. Although the following procedure did take me longer that just kicking off the standard over the air iOS update, I always think it worth extra effort when upgrading something that I rely on every day (such as my iPad, iPhone, Macs, PCs, etc.). I think that the following procedure is very reasonable and worked well for me. However, your results may differ so follow this procedure at your own risk. Note that I also have a colleague that just did a simple over-the-air iOS 8 upgrade of his iPad 2 and it also worked great. Therefore, you certainly don;t need to go to the lengths that I do below, but I think it's worth it to get a very clean install with as little "baggage" from prior installs as possible.
I have now used my iPad 2 for two days and nights since upgrading to iOS 8 using the following method. And, I am happy to say that my iPad 2 is working better than ever (iOS 7 prior), with no crashes of any kind, good performance, good battery life, and good WiFi and Safari performance. Here are the steps that I personally took to install iOS 8. I hope they help some of you that are having problems with your iPad 2s and iOS 8 and are looking for a solution.
I'm certainly no iOS expert so I hope to see some suggested improvements to this method from the many knowledgable posters on this forum. Here goes:
Cleanup and Prepare
Clean up your iPad including removing apps you do not use, clean up your photos and videos in your camera roll, and clean up the music and other content you sync to the iOS device.
Make sure that you KNOW your AppleIDs and passwords. Make sure you understand which Apple IDs that you are using for iCloud, iMessages, and the Apple Store.
Make sure that you KNOW what your settings are for all of your other cloud/mail/calendar/contacts accounts (Google, Microsoft, DropBox, etc...).
If you are still using POP email in 2014 then understand that you are going to either lose your email or need to download it all again once your upgrade is done!
If you use Google Authenticator app or a password manager then make sure that you understand the process of restoring these apps and their settings from a separate backup if something goes wrong during your iOS restore process
Make sure that iTunes is set to encrypt your iOS backups. Doing so allows iTunes to store and restore passwords that you have stored on the iOS device.
Prepare your iOS Device
iOS Settings > iCloud > Storage & Backup > Back Up Now (this will be a secondary backup just in case)
iOS Settings > iCloud > Find My iPad > OFF
iOS Settings > Mail, Contacts, Calendars > Accounts > and Delete Gmail, Exchange, and other "cloud" accounts that you can add back later
iOS Settings > Wi-Fi > and "Forget" each remembered network
From iTunes on a Mac/PC
Make sure you have the latest iTunes version
Connect device by cable to iTunes on Mac (turn on the sidebar if not displayed)
iTunes > Sidebar > Right-click device > "Transfer Purchases"
iTunes > Sidebar > Apps > "Update All Apps"
iTunes > Sidebar > Right-click device > "Sync"
iTunes > Sidebar > Right-click device > "Back Up"
Identify iPad version from back of iPad and look up common name from Apple Site: http://support.apple.com/kb/HT5452
Downloaded appropriate IPSW file directly from Apple: http://osxdaily.com/2014/09/17/ios-8-ipsw-download/
Install appropriate IPSW file to iPad by holding "Option" key when initiating a "Restore iPad" from iTunes, select downloaded .ipsw file, confirm intention to restore iPad to iOS 8: http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/
WAIT ... until the firmware install is completed
WAIT ... until the iPad reboots itself and then ends on the "Hello" page
Finally, swipe the "Slide to Setup", choose your language, region, and WiFi network, enable location services
Then choose "Restore from iTunes Backup", then wait for iTunes to bring up the "Welcome to Your New iPad" screen
Choose "Restore from this Backup" (check the date and time), click "continue"
WAIT ... for restore to complete, for the device to reboot, and then for the iTunes "Sync" to complete
Swipe, then click "continue", then type in the password for the iCloud account listed
Agree to Terms and Conditions
Agree to turn on Find My iPad
Do NOT upgrade to iCloud drive yet (until Mac OS Yosemite is available and on your Macs)
iOS Settings > Mail, Contacts, Calendars > Accounts > add back your cloud/mail/calendar/contacts accounts (Google, Microsoft, etc...)
Enjoy your very clean iOS device
LASTLY ... Go to iOS Settings and go through nearly every setting to get familiar with the features of your iOS device. If you find a setting that you don't understand then Google it. If you don't need a feature, then disable it for better security and better battery life.Tim Snoots wrote:
I thought that I'd report on the method that I used to successfully upgrade my iPad 2 to iOS 8.
It's always excellent to hear a successful update account, for an iPad 2 with iOS 8 ... since many people who have been posting think this is impossible. From accounts like yours and the many others I've heard, it's entirely possible, if one does it the right way!
When someone is having trouble, though, after having already done the upgrade, I would recommend doing the following ...
Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
This is a troubleshooting methodology that you are going through. See it through to the end.
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
I've used the digital AV Adapter (bought in Apple Store) nicely on iPad 2 with iOS 4.3.x.
After upgrading to iOS 5.0.1 the TV Out settings have disappeared from the General Settings menu (no matter if adapter is plugged in or not).
I thought that maybe it was time to do a full reset (just in case), so I did that, while the adapter was still plugged in.
When the iPad finished resetting I got a popup message on the lock screen saying:
"This Accessory is Not Supported by iPad"
The adapter sort of works, i.e. there is a picture on my TV, but I cannot control the TV output settings which I could in iOS 4.3.x.
The TV Out settings are completely missing from the General Settings menu (if they were moved in iOS 5.0.1 somewhere else, I could not find them).
The "TV Out" menu item is not there at all.
I cannot select between PAL/NTSC output anymore which is crucial for me as it seems that the iPad current setting is PAL, while I need to be it NTSC, otherwise video drop frames/stutters when played back over a TV.
What I would like to know if there is anybody out there who has iOS 5.0.1 and actually can see the "TV Out" settings under the General Settings (I think it should follow the "iTunes Wi-Fi Sync" directly), because no matter what I did I cannot the settings menu to be displayed (I've reset the device, plugged and unplugged the adaptor and HDMI cable multiple times, tried different TVs, etc)
Or, if the settings are in fact, gone by design, then how am I supposed to play 23.976 or 24 FPS media on a 1080p50 TV without stuttering (don't answer that, I know it is impossible, I am just frustrated). This is the first ever device I bought from Apple and I must say I am not that impressed by such turn of events.
I mean, what kind of update removes essential features and makes the officially produced accessory suddenly "not supported"? Did they even test their own official accessory?? Seems not to me.
This thread is talking about sort of similar issue (although it is about the VGA adapter):
https://discussions.apple.com/thread/2413622?start=0&tstart=0Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1). -
Just upgrade ipad 3 to ios 7.1.1 and i can't play videos on you tube using safari
Hello, i just upgrade my ipad 3 to ios 7.1.1 and i can't see most of the videos on you tube. I use Safari and I don't have the you tube app installed. Videos that used to play without problems, now the screen goes black and that's it, without any message. Any suggestions?
I reboot the ipad and it didn't work.IOS device do not support Flash; you may want to try the following browser.
However Skyfire, Photon, iSwifter, Browse2Go and Puffin Web Browser will provide limited Flash capability -
Hi,
I have iPad 2 with iOS 6.1.3 on board.
How I can upgrade on iOS 7.1.2 only?
ThksYou can't. You would have to upgrade to 8.0.2 at this point.
Sorry,
GB -
What should i do when I get 3259 error on upgrading ipad 2 to ios 5?
i cannot upgrade my ipad 2 to ios 5 using itunes on windows 7! error 3259! what should I do?
Try temporarily turning off all your firewall and antivirus software until the download has completed.
-
Problem when trying to upgrade ipad 2 to ios 5
I was attempting to upgrade my ipad 2 to ios 5. It went through the backup but then couldn't restore. Now itunes won't recognize the ipad and even after a soft reset the ipad is showing only the itunes logo and a photo of the usb cable. Help!!
See if putting it into recovery mode helps : http://support.apple.com/kb/ht4097
-
How to upgrade Ipad 1 to iOS 5.1.1
When trying to upgrade apps, get message to upgrade to iOS 5.1.1
How do I do thatIf you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
Just upgraded ipad 2 to ios 7.04. Now i can not put music or films on it.
I just upgraded my ipad 2 to ios 7.04. Now i can not put any music or films on it. by syngronising he goes to 6 of 6 but continues to work but ipad does nothing.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
Cheers, Tom -
HT4972 How to upgrade iPad software to iOS 5 step by step guide
How to upgrade iPad to iOS 5
Connect iPad to iTune (computer) and Check for Update.
http://i1224.photobucket.com/albums/ee374/Diavonex/a12310c6040505d18fbb03256ceb7 0de.jpg
Maybe you are looking for
-
can not sign in on my Ipad to ITunes Store, my pasword has not been working I have tried to change password but still unale to sign in.
-
Is there a generic XML parser written in PL/SQL that does not rely on java that will run against a 7.3.4 database? If please let me know where I can locate it. Thanks, Tim null
-
Dose j2se1.4 not support SQL JDBC driver?
My programme dosen't work at j2se1.4, but it is correct in j2se1.3.1? Counld anybody tell me the reason?
-
hi, just got a MacBook pro 2008 from a friend who bought it online. When it came we tested it and it was working. The person he wanted to supply changed his mind and my friend left the mac in the office cabinet since late last year. I decided to buy
-
Hi All, I am currently a very happy 11 year Arch / RHEL / fedora user but always looking for a new challenge. So I am thinking about switching my desktop pc / home server from Arch64 to FreeBSD. I read a lot of stories here about people switching to