Upgrade iPad iOS 5.1.1 to iOS 6

My iPad is the original first generation. The OS is iOS 5.1.1. How can I get it upgraded to iOS 6?

Actually no. Officially the orignal; Samsung Galaxy S i9000 can only be upgraded to Gingerbread.
Android 4.0 and later
An official update to Android 4.0 was never released, as Samsung felt that the Galaxy S did not have enough memory (RAM) to run the TouchWiz interface on top of Android 4.0.[33] In lieu of Android 4.0, Samsung released a "Value Pack" update for the Galaxy S in March 2012 in South Korea, which maintains the 2.3 (Gingerbread) -based operating system, but includes new features from TouchWiz 4.0 (some of which backported from 4.0) such as face unlock, improvements to the launcher, the ability to take still photographs while recording video, and a redesigned photo editor.[34]
However, unaffiliated developers associated with Cyanogenmod produced unofficial updates based on Android 4.1 and 4.2 for the Galaxy S and its variants. These updates are developed from Android Open Source Projectcode.[35]
There are alternative ways not supported by Samsung to update yes but that's akin to jailbreaking the iPad and of course is not valid when comparing lifespans
With that said, There are still thousands of applications in the App store perfectly capable of running on an original iPad.
I've also owned an Android Samsung Galaxy Young, which was unupdateable past 2.3 Gingerbread right out of the box.

Similar Messages

  • How do I upgrade iPad iOS

    How do u upgrade iPad operating system to iOS 6
    I am using ios4 now. When I go to systems then to general, there is no button for software update

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you are on iOS 4 as your tagline suggests then you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    Your iPad will be updated to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change.

  • Apps don't work after upgrade ipad ios 5.1

    I have updated my ipad to ios 5.1.
    No apps work except native ones.
    Is there a way to fix this ?
    thanks

    Try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

  • Upgrade IPad IOS 5.01 to IOS 5.1

    How can I update my IPad2 3G to IOS 5.1 using ITunes? It is currently using 5.01?

    How to update your iPhone, iPad, or iPod touch

  • Cannot seem to upgrade ipad ios 3.2 to 4.3

    Backup function takes days and nothing seems to happen. Should I reset to factory?

    Simardypants-
    Something is definitely wrong.  When you Sync the iPad to iTunes, the backup should be complete in a few seconds.  You might have a bad cable, or perhaps swapped an iPad cable with an iPhone cable by mistake.
    I suggest you re-install iTunes.  You can download a fresh copy of the latest version from the Apple website.
    Fred
    Apple - iTunes - Download iTunes Now

  • After upgrade to IOS 8.3  iPad Air no longer connects to iTunes

    Today I upgraded my Macbook Air to Yosemite 10.3 and my iPad Air to IOS 8.3
    After upgrading the iPad I was asked to connect it via cable to iTunes in order to allow for wireless sync.
    When plugging the cable in, the iPad starts sending endless alert beeps and the top line of the screen is shaking. On iTunes the error message "iTunes could not connect to this iPhone. This device is no longer connected." appears with every alert beep from the iPAD. No matter how often the OK button is pressed, the message appears rightaway again.
    I made a full backup of the iPad Air before upgrading to IOS 8.3 but I am very reluctant to reset the iPad as the same error might come up when connecting the iPad after reset to iTunes and then I would not be able to restore it at all.
    Does anyone had a similar experience and/or is there any known workaround?
    Many Thanks for any suggestion.
    G.W

    Thanks for your further consideration, much apreciated. I tried a different cable, different port and did reboot and soft reset. I also did reset of settings on iPad, just in case.
    As  I can with no problems use the same USB cable and USB port with my iPhone to connect to iTunes, the issue must be somewhat with the iPad Air and iTunes on my Macbook Air. I also can connect the iPad with the same USB Cable to iTunes on a different Macbook with no issues.
    I think, best is to do a full backup on a different machine and then setting back the iPad to initial state, followed by a restore.
    This I can (hopefully successfully) do with iTunes on a different Macbook.
    Many thanks for you kind support.

  • IPad app no long works after upgrading to iOS 7.1.1

    iPad app no long works after upgrading to iOS 7.1.1

    Did you try deleting then reinstalling the app?  Sometimes developers will need to update their apps for compatibility.  If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

  • Upgrading iPad 2 to iOS 8 Successfully

    I thought that I'd report on the method that I used to successfully upgrade my iPad 2 to iOS 8.  Although the following procedure did take me longer that just kicking off the standard over the air iOS update, I always think it worth extra effort when upgrading something that I rely on every day (such as my iPad, iPhone, Macs, PCs, etc.).   I think that the following procedure is very reasonable and worked well for me.  However, your results may differ so follow this procedure at your own risk.  Note that I also have a colleague that just did a simple over-the-air iOS 8 upgrade of his iPad 2 and it also worked great.  Therefore, you certainly don;t need to go to the lengths that I do below, but I think it's worth it to get a very clean install with as little "baggage" from prior installs as possible.
    I have now used my iPad 2 for two days and nights since upgrading to iOS 8 using the following method.  And, I am happy to say that my iPad 2 is working better than ever (iOS 7 prior), with no crashes of any kind, good performance, good battery life, and good WiFi and Safari performance.  Here are the steps that I personally took to install iOS 8.  I hope they help some of you that are having problems with your iPad 2s and iOS 8 and are looking for a solution.
    I'm certainly no iOS expert so I hope to see some suggested improvements to this method from the many knowledgable posters on this forum.  Here goes:
    Cleanup and Prepare
    Clean up your iPad including removing apps you do not use, clean up your photos and videos in your camera roll, and clean up the music and other content you sync to the iOS device.
    Make sure that you KNOW your AppleIDs and passwords.  Make sure you understand which Apple IDs that you are using for iCloud, iMessages, and the Apple Store.
    Make sure that you KNOW what your settings are for all of your other cloud/mail/calendar/contacts accounts (Google, Microsoft, DropBox,  etc...).
    If you are still using POP email in 2014 then understand that you are going to either lose your email or need to download it all again once your upgrade is done!
    If you use Google Authenticator app or a password manager then make sure that you understand the process of restoring these apps and their settings from a separate backup if something goes wrong during your iOS restore process
    Make sure that iTunes is set to encrypt your iOS backups.  Doing so allows iTunes to store and restore passwords that you have stored on the iOS device.
    Prepare your iOS Device
    iOS Settings > iCloud > Storage & Backup > Back Up Now (this will be a secondary backup just in case)
    iOS Settings > iCloud > Find My iPad > OFF
    iOS Settings > Mail, Contacts, Calendars > Accounts > and Delete Gmail, Exchange, and other "cloud" accounts that you can add back later
    iOS Settings > Wi-Fi > and "Forget" each remembered network
    From iTunes on a Mac/PC
    Make sure you have the latest iTunes version
    Connect device by cable to iTunes on Mac (turn on the sidebar if not displayed)
    iTunes > Sidebar > Right-click device > "Transfer Purchases"
    iTunes > Sidebar > Apps > "Update All Apps"
    iTunes > Sidebar > Right-click device > "Sync"
    iTunes > Sidebar > Right-click device > "Back Up"
    Identify iPad version from back of iPad and look up common name from Apple Site: http://support.apple.com/kb/HT5452
    Downloaded appropriate IPSW file directly from Apple: http://osxdaily.com/2014/09/17/ios-8-ipsw-download/
    Install appropriate IPSW file to iPad by holding "Option" key when initiating a "Restore iPad" from iTunes, select downloaded .ipsw file, confirm intention to restore iPad to iOS 8: http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/
    WAIT ... until the firmware install is completed
    WAIT ... until the iPad reboots itself and then ends on the "Hello" page
    Finally, swipe the "Slide to Setup", choose your language, region, and WiFi network, enable location services
    Then choose "Restore from iTunes Backup", then wait for iTunes to bring up the "Welcome to Your New iPad" screen
    Choose "Restore from this Backup" (check the date and time), click "continue"
    WAIT ... for restore to complete, for the device to reboot, and then for the iTunes "Sync" to complete
    Swipe, then click "continue", then type in the password for the iCloud account listed
    Agree to Terms and Conditions
    Agree to turn on Find My iPad
    Do NOT upgrade to iCloud drive yet (until Mac OS Yosemite is available and on your Macs)
    iOS Settings > Mail, Contacts, Calendars > Accounts > add back your cloud/mail/calendar/contacts accounts (Google, Microsoft, etc...)
    Enjoy your very clean iOS device
    LASTLY ... Go to iOS Settings and go through nearly every setting to get familiar with the features of your iOS device.  If you find a setting that you don't understand then Google it.  If you don't need a feature, then disable it for better security and better battery life.

    Tim Snoots wrote:
    I thought that I'd report on the method that I used to successfully upgrade my iPad 2 to iOS 8. 
    It's always excellent to hear a successful update account, for an iPad 2 with iOS 8 ... since many people who have been posting think this is impossible. From accounts like yours and the many others I've heard, it's entirely possible, if one does it the right way!
    When someone is having trouble, though, after having already done the upgrade, I would recommend doing the following ...
    Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
    First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
    Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
    On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
    This is a troubleshooting methodology that you are going through. See it through to the end.
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
    https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

  • How to upgrade to iOS 8.1 on original iPAD

    I have an original iPad.  The current OS is 5.1.1.  When I try to upgrade using the latest version of iTunes on my PC using the "Check for Update" function, it says that "the version of the iPad software (5.1.1) is the current version" and doesn't offer me to upgrade.  Is it possible to ugrade to iOS 8 on the original iPad?

    asmith_ru wrote:
    Is it possible to ugrade to iOS 8 on the original iPad?
    No, it is only possible to upgrade to iOS 5.1.1 on the original iPad.

  • Unable to play some movie from Netflix on my iPad. When I click on a movie an error message comes up which says "cannot play movie. Please try again". Can anyone assist me? I just upgraded to iOS 7.1. Netflix not able to find problem.

    Unable to play some movies from Netflix on my iPad. When I click on a movie an error message comes up "Cannot play movie. Please try again later." I contacted Netflix but have not been able the help so I am wondering if it's my iPad. I didn't have a problem before but I have recently upgraded to iOS 7.1. Also is a certain amount of storage needed to play a movie? About how much is that?

    Hello all,
    I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
    So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
    So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
    Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
    Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

  • Upgraded to iOS 6; No WiFi on iPhone 4S and now iPad 3

    Upgraded to iOS 6 earlier today at work. Used their WiFi to update. Came home and now no WiFi. I've tried changing the SSID and changed from WEP to WPA and then back to WPA. After doing all those changes still not connecting.
    I know some topics have said to delete the Safari history or whatever. Tried that and that didn't work.
    I just updated my iPad 3 to iOS 6 and now it won't connect to my WiFi. I have a Netgear WGT624 v3 with the latest firmware. This is an older router but ALL my devices have worked with no issues until this update was released and install on 2 of my devices.
    I still have an iPad, iPad 2, 2 other iPhone 4's and a 3GS to update and I'm not doing that until I have my WiFi working on the iPhone 4S and iPad 3.
    What is the problem Apple? Its going to be weeks before they fix this issue.

    Found a solution to my problem.
    I'm using the Netgear WGT624 v3 router with the latest firmware. I searched online for Netgear issues with iOS 6 and found this link.
    http://www.davejackson.com/life/cant-access-wifi-with-ios-6-on-iphone-with-netge ar-wgt624v3-fix/
    Basicallt I downgraded the firmware of my router and now the WiFi works. Just a temp fix until Apple address the issue. Then I will try to upgrade back to the newest firmware.

  • I have a "company provided Ipad" now using IOS 6.1.3.  the company Will allow me to upgrade to IOS 7 but not to IOS 8.  Is that possible?

    I have a "company provided Ipad" now using IOS 6.1.3.  the company Will allow me to upgrade to IOS 7 but not to IOS 8.  Is that possible?

    No, since the iPad 2 is iOS 8 compatible it can only be updated to iOS 8.  Apple does not support upgrading to interim iOS versions, and removes those files from the servers when a new version is released.  The only path for that iPad 2 is iOS 8.0.2.

  • My iPad 2 was accidentally upgraded to IOS 7 from 5.1.1. I have a backup on my windows xp PC from last June 13 would this restore it back.

    Hello,
    From purchasing my iPad 2 which had IOS 4 installed at new I upgraded to IOS 5.1.1 and had no intention of upgrading further missing out on the IOS 6 and the reviews of IOS 7 was a definite no no to me.
    That was before my great-granddaughter age 8 was playing her games or colouring  because she has her own page did for some reason open up the settings app and the rest is history, when she said grandad there's something wrong and I went to look my heart sank and tried turning off both iPad and router but there's just no stopping it.
    Everybody say's that I am now stuck with IOS 7.0.4 but I am not convinced because I created a backup of my iPad last June 13 in iTunes with IOS 5.1.1 and wondered if I could restore back to that backup.
    Also while I am playing around with this new operating system what parts am I not able to run on iPad 2 that is in the full version of IOS 7.
    Regards
    Gadgetman21uk

    No, it will still stay as IOS 7.0.4

  • IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year

    IPad 1 Safari crashes frequently. I went to many Apple stores in different countries and each Apple staff member had their own different opinions with no help. I had upgraded my iOS to 5.1.1 and the Safari crashing started about one year after the upgrade and some Apple staff blame this- but this started one year later after the iOS upgrade. Recently at the Apple Store in Vancouver an Apple staff reset my computer (erased everything and sent to iCloud to reset the iPad) and I hoped this would fix the problem. IPad Safari still crashes. Short of booking an appointment for taking it for repair to Apple technicians which will cost me money can anyone help me to fix this Safari crashing.

    Hi,
    You might have a 3rd party plugin that isn't compatible with Safari 4.0.4. Go here for help...
    Safari add-ons can cause performance issues or other situations
    If you are using a USB hub, try disconnecting and restarting with just your keyboard and mouse connected.
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    from the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Mac OS: Web Browser Quits Unexpectedly or Stops Responding
    Also, you could download and install the 10.5.8 combo update (PowerPC) available here.
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    It contains fixes that might help. Then repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

Maybe you are looking for

  • IOS8 Continuity calling, o2, UK - How to turn it off

    Hi All, I've seen the suggestions about switching off cellular calls on an iPad to stop it ringing under continuity, however, my problem is different.  In my home there are 4 iPhones and 2 iPads.  I have a works and personal mobile, one for the wife

  • Illustrator CS6 - Converting to a 1 Colour Job

    I currently use Illustrator CS3 to process an SVG file into an EPS file via a particular method - I'm having a problem duplicating the results using CS6 and suspect it is to do with the Pantone + issue. If anyone could shed any light on this I would

  • How to set autoscroll function in docs delivered in PDF

    Hi I work regularly with PowerPoint slides which i sometimes deliver in PDF format to clients. And i would like to add the feature of autoscroll to the PDF itself so that when the user opens it the pages/slides start scrolling by themselves. Anybody

  • A change in apex 4.1?

    Hi, In my app, I have a process running after submit that prints out some javascript to close a modal popup, which worked pre 4.1 and now it doesnt. It only worked when there was no branches defined on the page. Now it doesnt work anymore, and it see

  • Implenting webdynpro search application using indexmanagement APIs withTREX

    Hi experts, Iam implementing a webdynpro aplication Using KM indexmanagent API's for searching with TREX. As part of my development i read all the documents and BLOGS, which are available on SDN and SAP. But in all those documents they have explained