Upgrade iPhone2G (2.1) - 3G (2.0.2), but different OS's. Help
Hi all. Yesterday I upgraded from my 2G iPhone running OS 2.1.
The new 3G I bought had OS 2.0.2.
So I had dutifully synced and backed up my old phone before getting the new one, but upon plugging in the 3G it says "Sorry, you cannot restore from a backup because the backup has a newer OS" or something to that effect.
left with no choice, I had to set up as a new phone, and then sync everything and make the dozens of changes to stuff.
MY QUESTION is, I am getting my wife's phone upgraded today and I do not want that to happen again. What should I do? Should I initially plug it into some other computer to get the OS upgraded, and then plug into the primary machine and sync? I'm just not sure how to avoid that OS mismatch step.
This seems to be the problem....
Page 11 of Oracle® Database Application Express Installation Guide Release 3.0
Oracle Database Requirement
Oracle Application Express version 3.0 requires an Oracle database that is release 9.2
or higher.
Do not install this version of Oracle Application Express on
Oracle Database Express Edition (Oracle Database XE).
Justin
Similar Messages
-
I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 126) Please Help me!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99623) -
After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.
I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.
-
i have one iphone 3gs and i want it to upgrade my iso from 4.1 to 6 but now it dond wanna activate,what i can do?sorry for the language i am from romania so..
i am also having the same problem.....but there is no solution i am stil waiting for the responce of apple adviser.
-
hi ive upgraded my itouch to ios 6.1.3 but it keeps crashing ounce i put my passcode in is there a way i can fix this? one of my friends mentioed downgrading it but the only way isnt supported by apple so i dont feel safe with it so plzz help me.
it has worked fine no problems till i updated it i tried restoring itwith my old backup but it doesnt move the ios back so it just keeps on craching when i try to unlock itTry:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Downgrading the iOS is not supported by Apple -
I'm trying to import photos from my iphoto library, but keep getting a message saying I cant import from 7.1.5, that I need to upgrade to 7.1.5 or later. But I have version 8.1.2. I don't know what to do. I've been able to import in the past.
Sounds like an issue with the iPhoto Library
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I wish to upgrade my Macbook Pro to ML from SL but told the only way to do this is by downloading thru App store. Is it possible to copy ML on to a USB and upgrade that way. I would like to have a back up of the OS installation files just in case i have a problem later. Please help me!
You can create an install disc but you would have to download Mountain Lion to do so..
How to create an OS X 10.8 Mountain Lion install drive | MacFixIt - CNET Reviews
And make sure your Mac can upgrade to Mountain Lion.
See Step 1, 2, and 3, here > Apple - Upgrade your Mac to OS X Mountain Lion. -
Upgrading to Windows vista means itunes wont detect my ipod?? Help please.
Recently upgraded to windows Vista. Big whopdeedo.
But anyway, when I plug my ipod in, windows tries to update drivers for it, but of course failas horribly.
However, this is having a knock on effect that means itunes wont detect my ipod. So, while my ipod recharges, I cannot sync it. Thus I can't add new songs and what-not.
Please help.Yes my ipod is jailbroken, but this has never proved an issue before.
Its not just itunes that now wont recognise my ipod, my other software wont either, and they used to work with the jailbroken ipod.
This all started after i synced a nano, then connected my ipod and a screen came up saying ipod camera connected.
I click on the camera icon in mycomputer and properties tab then selected take no action in the events tab.
This hasnt resolved my issue, and the ipod still comes up as a camera in mycomputer, the only difference being im now not prompted to choose a program to view my photos with.
This is really getting up my nose, as for the second poster, sorry that article was no help at all.
Please someone help me -
Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse
Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering. -
I backed up my iphone 4 and did an upgrade and changed my Apple ID and password but my phone has not recognised the new ID to upgrade my apps via the iphone. How do I get rid of the old Apple ID when it comes to upgrading apps.
I have been into setting>store and signed out and signed back in and it still asks for old ID and password.Everything you've had up to now has been tied to your old Apple ID. You cannot switch it over to a new Apple ID. You should contact iTunes support to help you with this:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.
For Mac App Store: Mac App Store Customer Service.
For iTunes: Apple Support for iTunes - Contact Us -
I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!
You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive. -
I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP52.008E.B05
SMC Version (system): 1.42f4
Sudden Motion Sensor:
State: EnabledCheck to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2) -
Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine. This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.
Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Hi Mark,
I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
MickMoving this discussion to the Downloading, Installing, Setting Up forum.
Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased. You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html. -
I am trying to upgrade my Creative Suite 5 to Creative Cloud but am being told that I do not qualify for the upgrade, does anyone know why?
If you have the Education version you do not qualify due to the LARGE Education discount
Maybe you are looking for
-
InDesign to PDF (Not printing black
Hi, I created a document for a booklet I am putting together. I have exported it as a PDF in High Quality Print with all the crop marks on it. But when it is printed, it comes out as a cyan color which is not what I want. Can someone help me fix this
-
HT201412 video player just stopped working
video player does not play screen just goes black
-
My toolbar will only open when I press alt and then only the top line
the complete top toolbar is not visable on any web page. to use file print history or bookmark I have to press ALT. the top line then disapears when a website is chosen. I then have to repeat this for every bookmark choice.
-
Bootcamp installer not working on XP 64bit
Hello, So I installed XP sp2 64bit and all went smooth, but my probelm is when I enter the Mac OS X installation dvd and run the bootcamp installer I get, bootcamp requiers you to have windows xp sp2 or windows vista error msg. I am running xp sp2 so
-
i had created my apple id from apple's site and now when i am trying to sign in to itunes ,i m being taken to payment method page and there is no option as 'none' and i dont have a credit card.What to do?