Upgrade Ironport C170 to version 8.0.1-023
Hi, my environment has 01 C170 box with the version 7.5.1-102 and I bought 01 C380 to upgrade the infrastructure.
My question is, in order to I get the successful upgrade I have to upgrade the version from C170 to the same C380.
The C380 came with the release 8.0.1-023.
My question is: Does The C170 support upgrade till this version? How many upgrades I have to do to reach the version 8.0.1-023?
How is the best way to make a cluster with these 02 boxes?
Thank you.
Yes - the C170 can upgrade to 8.0.1-023. Upgrade path would be:
phoebe-7-5-1-102 --> phoebe-7-6-1-022 --> phoebe-8-0-1-023
The best way to cluster... the C380 should have the 'clusterconfig' command active, and you can request the license from our Global Licensing Operations for the C170, they should be able to provide a temp license, or full license...
Please contact our Global Licensing Operations team:
https://tools.cisco.com/SWIFT/LicensingUI/Home
Licensing FAQ
Phone: 1-800-553-2447, opt 3 (You may request to have a case opened for GLO/Licensing.)
Their email directly is: [email protected]
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)
Similar Messages
-
Ironport C170 Config file restore
Hi Team,
We have 2 clustered Ironport server with AsyncOS 7.5.2 with site 1 and now we are building new DR site for Exchange 2010 and buiding Ironport on DR site.
We have one ironport AsyncOS 7.6.2 for Cisco IronPort C170 build 201 at DR site.
We have to restore configuration file from Site 1 to DR site.
Can you please provide me the steps to restore the file from site 1 to DR site
I have removed the one node from ironport cluster from site 1 and taken the backup of the configuration file.
Regards,
PravinPravin -
You will need to upgrade all appliances to the same revision in order to have the configuration used from site 1 to the DR. Also, 7.5.2 and 7.6.2 are EOL, and you would be strongly suggested to upgrade to the minimum of 7.6.3-019 for all appliances.
After that - it would just be a matter of looking at this two ways - while upgrading the appliances at site 1, just save the configuration copy once upgraded as needed to 7.6.3-019. Make a copy and modify the Network Configuration section: Hostname, Interface <IP>, Routing Table... and then load that copy on the DR site.
Or - the other way to look at it would be to just join the DR site to the cluster. That way all configuration is shared among the three appliances.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!) -
Ironport C170 Central Management Feature...
We have a SINGLE Ironport C170 that was set up by an IT Services group here over 6 years ago- before I was hired. We have been getting the following message e-mailed to us recently:
The Warning message is:
Your "Centralized Management" key will expire in under 5 day(s). Please contact your authorized Cisco sales representative.
Our concern here is this:
We do not use "Centralized Management"- we only have one office, one E-mail Security appliance. Should we worry about this feature expiring? Is this a Feature Key that we will need to purchase a renewal for? I appreciate any insight into this issue.
Q.M. Quiney
Network Admin
Precision Payroll of AmericaCentralized management key was separate (non-free) feature key for connecting multiple appliances in the cluster. Now this license key is included in all newer SW versions in the base license.
If you're not using multiple appliances you don't need this feature and you can ignore this warning.
Just to be sure you're not using a single appliance in a cluster check cluster status with CLI->clusterconfig. -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
I have 3 laptops. On 2 of them I upgraded to the new version of Firefox recently when I was prompted to do so. Both of those laptops now have trouble with chat . My 3rd laptop I have not upgraded to latest version and the chat still works. Either fix this or I have to use a different browser. I need to chat for my work. I can't make money without chat feature!!!
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
I upgraded to the iPad Version of Pages
I just wanted to add my voice to the already swarming people about my utter disappointment in the "Upgrade" to Pages.
First of all, When I saw it was a Free Upgrade, I immediately became suspicious. Apple only ever gives Free Upgrades or Free products when it knows its not going to go over well. (Bumper Cases), etc. And it being free, they believe that they can defang the descenters.
Yet, I still held out hope that it would be an upgrade and ADD enhancements and streamline an already GREAT word processing program. I Stopped using MS Word years ago, because I liked Pages so much more. Once I got it installed, i found out, that I had upgraded to the iPad version of Pages.
Here is this revolutionary device, the iPad. Following the iPhone as the best new device in the History of Ever. AND IT WAS!... What made it GREAT is that in general, it ran REAL software. Not the nerf'd web browser of similar devices that really never worked. Steve Jobs made it part of the WOW when he said.. Here is this new Device. IT RUNS THE SAME SAFARI as on the Mac (same general capabilities). It Was Awesome.
Fast forward to now, I have had an iPad since the iPad ONE. Im an avid user of all apple devices. When they released Pages for the iPad, I forked over the $20USD to purchase it thinking HEY, it would be just like using it on the Mac. Well, it wasnt. It was a nerf'd version. But even still that was sorta understandable. A good word processor for a tablet even as advanced as the iPad, was sure to ge a difficult challenge. Subtle updates, and such to Pages on iPad helped, but I can honestly say, Pages for iPad never worked for me as THE PLACE i wanted to go to build complex, full feature documents.
So Apple in their thinking outside the box manner (which usually turns out good things), goes and "upgrades" the Mac, Full-Featured version of pages to resemble the iPad version which had never been a great word processor to begin with. What a mighty disappointment.
I understand that these days, Apple no longer innovates for the sake of innovation, their innovation is driven by the market. For such a great company, with such a great legacy, it is such a disappointment.
Sorry Apple, you got this one wrong...!When I checked out the on-line help for Pages, it distinctly mentions two types of document layouts: blank-template-based (like a simple letter) and placeholder-based (like a pamphlet).
With blank templates, you just type as if you're in a standard word processor (perhaps my use of the word "freeform" didn't help matters much).
With placeholder-based templates, you insert text boxes for where you want text to appear.
Here's some wording from Apple's own on-line help file:
If you’re using a blank template, just start typing to add text to the body of your document. If you’re using a template with placeholder text, first select the placeholder text; whatever you type replaces it. As you enter text, new pages are added automatically to accommodate it.
And as far as I can tell, new pages are NOT automatically added when using placeholder text. -
I have a Macbook Air with Mountain Lion..I upgraded to the latest version called mavericks ox now it crashes a lot...when I use the shift and Caps keys especially. I now have version 10.9. how can I get mountain lion back and get rid of this update?
all of my software was current before i upgraded to maverick....i don't know why this is going on...any help?
-
I recently upgraded to the latest version of FF and now when using a webmail client I am routinely logged out when I try to search e-mail. It works in IE, but I don't like or want to use IE.
== This happened ==
Every time Firefox opened
== TodayUnstable means it can vary in stability day by day as it can be crash prone to being stable. Features can be a work in progress for a while. The May 24 Nighty build was crash prone for a lot of testers for example.
-
Where did Google Earth go when I upgraded to the latest version of Firefox?
I clicked the popup that upgraded to the latest version of Firefox - and clicked to give it permission to make changes to my computer - and my Google Earth was no longer there. I restored my computer to before I had made the Firefox changes and my Google Earth was there but I got a blank page when I tried to open Firefox. Then I re-downloaded Firefox and Google Earth is gone. I would like to have both. If I have to do without one I would give up Firefox and use Internet Explorer until the problem gets fixed.
''andy_blunden [[#question-1057157|said]]''
<blockquote>
When I drag messages from the Inbox to another folder for archiving, they don't move. This problem has only arisen since I updated to the latest version of Thunderbird.
</blockquote>
I doubt it is a Norton Security problem. Maybe. I solved it by deleting the account and re-installing it. -
I can not delete my history and adding new bookmarks.
Upgrading to later Firefox versions and/or re-installing didn't rectify it either.
The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.
Also, I have noticed that every once in awhile you can not close tabs you've opened, either by pushing on the X button and/or clicking on the mouse to close it. Although closing the window and opening it again (without closing the Firefox application) seemed to rectify the problem in the short term, it's becoming quite annoying.
== This happened ==
Every time Firefox opened
== the Firefox is being usedI think I have a solution.
First, download the add-on SQManager. This should be included with FireFox, it is really good.
Look for the file '''moz_hosts''' in the folder '''places.sqlite'''.
Don't delete the file, just delete the information in the file. My file has over 3600 websites, which go back years!! I did not know they were there, but I was frustrated about not being able to get rid of them. They popped up every time I used the address bar. Clearing my history would not get rid of them.
This is where they are stored!! I found that by deleting the pesky web site from '''moz_hosts''', it does not appear in my address bar anymore!!!
I think that if I just delete all the websites in moz_hosts....
Wa-la...History Gone!!!
As long as you don't delete the file, just empty it, FireFox won't know the difference. It will just keep adding websites to it until you empty it again.
Why running "clear recent history" doesn't do this, I don't know. You are doing manually what "clear recent history" is not doing.
Please tell me if you see any flaw in this.
''I think it's the solution we've all been looking for!'' -
I initially set up my Sync account using an add-on for an older version of Firefox and have since upgraded to the latest version. But now my browser acts as if I don't have a sync account set up at all. When I attempt to create a new account, it says that my email address is already being used which tells me that my sync information is still on the the servers. So how do I retrieve my sync settings when settings are missing within my browser?
I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.
-
Upgrading from an older version of Photoshop
I was once told by someone on the Internet who was selling Photoshop that the version he was selling could not be upgraded. He said it was an OEM version. Is there such a thing as an OEM version of Photoshop, or a version that is not upgradable? I did not purchase his copy.
All legal versions of Photoshop can be upgraded.
All Pirate versions can't. -
Upgrading from an older version of Robohelp.
I have just sat on the telephone for over an hour with no response! The company I work for own an older version of Robohelp Office - Versions 9.0/9.2 and 2002, we have all the serial numbers, licence numbers etc, and we would like to know whether we can just purchase the upgrade to the new robohelp or whether we have to purchase the full licence. Any help would be great!
I'd be rather surprised if it was right. The product upgrade page says only version X5, 6 and 7 can be upgraded. Click here to see it.
Read the RoboColum(n). -
We are using Oracle ERP in our company which is a web based ERP system. I am using firefox to work in ERP for convinieince pf working and using internet at the same time. This requires a plugin provided by oracle oajinit.exe to be installed in Plugins it is a JAVA plugin which opens the ERP Screens. This works fine in versions prior to 3.6 version of firefox. However, after upgrading to 3.6 version the forms do not open and firefox crashes. Due to this i am not able to upgrade to the latest version else i'll have to operate the ERP in internet explorer and using firefox for browsing which i do not want. The plugin used for the ERP is "* JInitiator 1.3.1.18 for Netscape Navigator (DLL Helper)"
Firefox 3.6 needs the Java Second Generation Plugin which comes with newer versions than 1.6.0_03 - update Java, the latest version is 1.6.0_22
-
I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?
I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner
Maybe you are looking for
-
How can i replace user fonts folder with back-up?
I want to replace my user>library>fonts folder (which has somehow become corrupted and is incomplete) with a sound copy from a backup disk. When I try to do this, a dialogue box tells me that the "Fonts can't be modified or deleted because it is requ
-
Dear All, After I enter the advance amount into the travel request, may I know how to post it to FI in order to get the payment? Thanks!!
-
DMEE - creating new format tree
Hello, I have to define new format tree for my new company code. My problem is: how to check that I am in the first row of the file while processing payments. Format to define: 232145 1|<IBAN1>|<IBAN21>|<NAME1>|<ADDRESS1<|AMOUNT1>|<TITLE1>|DATE| 1|<I
-
Let me start with the basics: If you create an extension, the Stage Manager will create the container for you and load the swf into the container. This container can be one of three types: Panel, Model Dialog, or Modeless Dialog. Any one of these con
-
Which is best way to create a web Flip Book?
I am creating a spec book of about 200 pages and it used to print and go in a binder but now it needs to be on web as a flip book. Since I do all the production work in InDesign I hoped it could be an export. I have heard about http://page-flip.com/