Upgrade : Issue with Specical character being used in 4.6C ( Dynamic calls)

Hi ,
We are working on Upgrade from 4.6C to ECC6.0 . in SPAU phase we are facing an issue :
When we are trying to see the variants from the program, it says that the program contains Syntax Error
"In Unicode programs, the "&" character can not appear in names as it does here in the name 'op&xv0' "
The 'op&xv0' is a form. we tried changing the form name, but couldnt get the PERFORM stmt for the form and it might be a dynamic call. what can we do for this type of programs?
Please also suggest how we can identify the places where that particular Subroutine is being called.
Thanks & Regds
Teja

This is probably an operation defined in Tcode PE04. You can change the operation subroutine name and then modify the code accordingly in the report.
Go to PE04 and put in operation name, suposedly &xv0.
Instead of using standard name suggested by SAP use custom name (for example opYvx0) and then change in the report as well and it should be ok.

Similar Messages

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

Strange issue with rights of account, used by SSIS (Foreach Loop Container does not return file names without Admin rights on server)

Hello everyone.
Faced very strange issue with account, which is used to run SSIS package.
The specific package uses Foreach Loop Container to retrieve file names within the specified folder, and put them into Import file task.
The package is set up to run under specific service account. This service account is given all permissions (Full control) to the folder where source files reside.
So the issue is: SSIS package fails to execute this task (Foreach Loop Container and then Import), and shows that no files are found in the directory (although files ARE there).
Once we're adding the service account into local Administrators group on the SQL Server, it works! Removing - does not work again. We cannot leave the service account as SQL server's admin as it's prohibited by our IT policies, and is just a bad practice.
Any ideas, please?
MCP

Here's the real log output:
Date 16.04.2014 12:47:09
Log Job History (RU-BW: Update)
Step ID 1
Server Server
Job Name RU-BW: Update
Step Name bw_import_cust_master_data
Duration 00:00:02
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: service_account Microsoft (R) SQL Server Execute Package Utility Version 10.50.4286.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 12:47:09 Error: 2014-04-16 12:47:11.45
Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End Error Error:
2014-04-16 12:47:11.47 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid characters. End
Error Error: 2014-04-16 12:47:11.48 Code: 0xC0202070 Source: bw_import_cust_master_data Connection manager "Input" Description: The file name property is not valid. The file name is a device or contains invalid
characters. End Error Error: 2014-04-16 12:47:11.48 Code: 0xC020207E Source: Import file Flat File Source [1] Description: The file name is not valid. The file name is a device or contains invalid characters.
End Error Error: 2014-04-16 12:47:11.48 Code: 0xC004701A Source: Import file SSIS.Pipeline Description: component "Flat File Source" (1) failed the pre-execute phase and returned error code 0xC020207E.
End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:47:09 Finished: 12:47:11 Elapsed: 2.324 seconds. The package execution failed. The step failed.
MCP

I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

Hi miffyzoo,
If you are having bluetooth pairing issues with your iPhone and your Mac, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden

Can i revert back to the ios 5 maps on my pad. Im not quite satisfied with the maps being used on the ios 6 especially the street/ regular map

Can i revert back to the ios 5 maps on my pad. Im not quite satisfied with the maps being used on the ios 6 especially the street/ regular map. It looks good but some details like gas station, restaurants, sidestreets which are good references when travelling are not there anymore.

Load this map and save it on your Home Screen
https://maps.google.com/

Any issues with server 2008R2 being a backup AD when the Primary AD is a 2003 that was upgraded from NT

Someone recently told me if a customer has a Windows 2003 server that originally came from NT which was upgraded to Windows 2000, then upgraded to 2003 as their primary AD, if you add a 2008R2 server as a backup AD, it will upgrade the forest, but there
is an issue with the global catalog not properly replicating to the 2008R2 backup server and thus if the primary Windows 2003 server were to crash the backup 2008R2 server will not be able to authenticate users.
Can you tell me if this is true? It seems rather odd to me that if the 2008R2 is able to become a backup controller without any errors and does not report any AD or replication errors in the event log that it would not work if the primary AD failed.
Thoughts?

This is not true & never heard/seen of anything as such. The AD database either on windows 2003 or 2008 R2 contains similar objects & attributes, but few groups are only created when you transfer PDC role to windows 2008 & above DC esp if you
are using RODC.Also, there is no concept of primary & secondary DC from windows 2000 & above. PDC & BDC concepts existed in windows NT not any more.
The DC with GC role have bit more information because it contains partial information of the objects in other domain too. So, i would be taking backup of the windows 2008 R2 DC. As long as DLF/FFL is not enhanced you can run windows 2003 & 2008 R2 DC
in coexistence.
My suggestion would be transfer FSMO role on the windows 2008 R2 DC becasue may be at some point of time you would get rid of windows 2003 DC to enjoy full features of windows 2008 R2 AD.
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Issues with UpdateAction and later using jbo:RowsetIterate

Hello -
I am putting together a BC4J/Struts web app and am having some issues
with using the oracle.jbo.html.struts11.actions.UpdateAction class.
I am trying to figure out the correct way to reset a row after validation exceptions
so that <jbo:RowsetIterate> doesn't blow up when it hits the row if the user doesn't fix the
data they entered in to pass validation.
Call the objects being update 'Accounts'.
Pass 1:
User changes account data in an edit page and submits.
Struts hands off control to an action that is a subclass of UpdateAction which invokes super.execute(...).
UpdateAction does its thing - catches the validation errors and sticks them in ActionErrors.
Control gets passed back to the edit page with the errors displayed.
This is expected. HOWEVER, if the user goes to a page that lists accounts (via <jbo:RowsetIterate>) it blows
up on the edited account because it tries to validate the row. So...
Pass 2:
After super.execute(...) check to see if any errors happened (by whether or not the forward returned indicated success).
If there were errors, refresh the row via:
BC4JContext context = BC4JContext.getContext(request);
Row row = context.getRow();
row.refresh(Row.REFRESH_WITH_DB_FORGET_CHANGES | Row.REFRESH_REMOVE_NEW_ROWS);
This works (not blowing up if user goes back to listing page) for emptying a mandatory field (JBO-27014)
but not for inserting too much data into a field (JBO-27010). I've tried this with REFRESH_UNDO_CHANGES as
well with the same results. So...
Pass 3:
Instead of refreshing the row in my update action, rollback the transaction via:
BC4JContext.getContext(request).getApplicationModule().getTransaction().rollback();
However this seems unnessary - I don't want to rollback the whole transaction just to undo changes to one row. Is there some better way to fix the issue?
Any suggestions?
Thanks,
-- Scott

I don't know why either, but I'd love to fix it. Please install one of the debug packages (this looks like x86_64?):
http://dev.archlinux.org/~dreisner/kmod … pkg.tar.xz
http://dev.archlinux.org/~dreisner/kmod … pkg.tar.xz
Run 'gdb --args depmod 3.2.2-1-ARCH'. When it crashes, type 'bt full'. Post all that output here (either in code tags or on a paste service)

7.1.2 Upgrade Issue with 2012 Chevrolet Tahoe

I upgraded my iPhone 5 to iOS 7.1.2 and now it will not work with my 2012 Tahoe via USB connection. Vehicle has Bose system with navigation. Previously the display worked with Spotify and any music apps on the phone. Phone has been rebooted mutiple times. Vehicle has also been turned off and on.
The strange thing is I also updated to 7.1.2 on my iPad Mini (non retina) and it connects and works as it should.

Hey ylwdogsc,
I have an article that may help you address this issue and contains some helpful troubleshooting tips for this type of issue:
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
Troubleshooting tips
Beginning playback and controlling music
Some car stereos may require that playback be started or controlled from either the device or the stereo. Ensure that your car stereo is set to the proper input for your device. If it is and you cannot hear sound from your car speakers, try switching to your radio and then back to the proper input.
When using adapters to connect to your car stereo, you may notice variations in audio quality. When possible, use a shorter connection to the car stereo or try a different cable or adapter.
Disconnect and restart
If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
Isolate the issue
Try to reproduce the issue with an identical or similar accessory, if one is available, or test with a second device.
Example: If you hear static coming from the left audio channel, try connecting a different device or try connecting to a different stereo or accessory that connects over the same interface (30-pin or Lightning connector, Bluetooth, or headphone jack).
Restore iPhone, iPad, or iPod touch
If you have isolated an issue to the device, restore iPhone, iPad, or iPod touch to its factory condition. You should rarely need to use this step with an accessory issue. If the issue affects only a third-party accessory, contact the accessory manufacturer before restoring your iOS device.
If the device does not update successfully, the issue may lie with the device and not with the accessory. See one of the following articles, depending on your device:
iPhone
iPad
iPod touch
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

LightweightDispatcher issue with Applets in Browser using Java 7, not 6

Spent the last year at work setting up some GUI JApplets for demos our of code. The JApplets house a number of layers of JPanels and JComponents, but should have no heavyweight components as children. I've set up standalone applications that run one of the JApplets as a child of a JFrame, and those demos have no trouble. When I run the same demo but as a JApplet in a browser, I get errors. Please note that the demo is a JApplet but written like the demo that uses a JFrame, so the JApplet causing an issue is a child of the JApplet the browser knows about.
The issue is seen when the user mouses-over the child JApplet. The listener of the component being moused-over is trying to send an event that the LightweightDispatcher is erroring trying to retarget. It does not seem to find the component that should be receiving the event. For reference, the JApplet implements the mouse-listener interface and is set as the mouse-listener for all its children recursively. Here is the error that is seen:
Exception in thread "AWT-EventQueue-2" java.lang.AssertionError
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.trackMouseEnterExit(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
and it repeats that for every mouse event that tries to fire within the child JApplet.
Any thoughts on what this could be?
I had a similar issue with key strokes not finding the focused JComponent within the child JApplet, but I made my own KeyboardEventManager to handle that issue. Unfortunately there are no paths like that to override for the mouse listeners, not to mention that there is no focused object for the events erroring.
I do see that when I stop adding the mouse-listeners then the error does not appear, so I'm sure its related to that.
I suppose the most important note here though is that the JApplets were built using Java 6, but the error is seen when running the JApplet with the 1.7 JRE. Also, the JApplet is opened using a JNLP. When the JNLP is set to run at 1.6+ the demo runs fine, when set to 1.7+, the error is seen.
Please let me know if anyone has seen this or has a solution, or if I should report this as a bug to Oracle.

This shouldn't be the case. You did make sure you are pointing the applet at the plug in correct? That means you are using an <object> tag as opposed to the <applet> tag in the HTML file?
If not, run your HTML page through the HtmlConverter that comes with the plugin and try using the resulting HTML.
Bryan

Issue with Weblogic character encoding

I have struts2 based web application which works fine with tomcat server but when i deployed the application to weblogic 10.3 server it is creating following issue-
1) when i enter data in application forms with £ (pound sign), £ gets converted to ?
My Jsp Page is using ISO-8859-1 charset. please look at the snapshot from jsp page.
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
I have debug the application and came to know that this data (£ sign) is converted to ? before being assigned to corresponding property in action class.
this seems to be issue with encoding of characters with weblogic server.
I have also tried to fix this issue by defining the charset in weblogic.xml file in my application as follows but it does'nt solve this issue. please see the snapshot from weblogic.xml file.
<wls:weblogic-version>10.3</wls:weblogic-version>
<wls:context-root>APMApplication</wls:context-root>
<wls:charset-params>
<wls:input-charset>
<wls:resource-path>/*</wls:resource-path>
<wls:java-charset-name>ISO-8859-1</wls:java-charset-name>
</wls:input-charset>
</wls:charset-params>
Please suggest some solution to fix this issue. thanking you in advance.

"I can not change the charset in jsp pages i.e i have to use ISO-8859-1 in my jsp page which is a must have requirment."
You are right here as the pound sign is not included in UTF-8 (did not know that sorry).
Could you try setting the page directive of the JSP to
<%@ page contentType="text/html;charset=ISO-8859-1" language="java" %>or when you are working with jspx
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" xmlns="http://www.w3.org/1999/xhtml" version="2.0">
<jsp:directive.page contentType="text/html;charset=ISO-8859-1"/>
</jsp:root>

Iphone 4, ios5 upgraded, issues with iMessaging.....activation unsucessful, no associated telephone number, just email.

1. upgraded to ios5
2. activated iMessaging
3. get message saying carrier may charge for activation texts - never received these - no matter how many times i try to activate
4. keeps saying activation unsuccesful
5. allows me tho, to sign in with apple id
6. recipients receive iMessages in their text inbox but from my email address
7. if i sign out of apple id cannot use iMessages
8. iMessages has defaulted to email address, not telephone number as it should
9. if i try to add another email adress it will alow me but there is nowhere anywhere at all for caller id
10. i cant delete that email adress as it is the primary one that im signed in with as my apple id
11. i have done a hard restore, ive turned all my notifications, imessaging, face time off then turned phone off and on again....
12. considering a restore thru itunes
13. also considering a DFU
14. and finally considering flushing the bloody thing!!
can anyone help?

iMessage is a strange one for me too...
When I first activated it, it would not show up texts I sent or rcvd on both my iPhone and iPad.. just iPhone... I played with this for a long time before changing the "Caller ID" setting from within iMessage settings... NOT the one in the phone settings...
After I chose to use the email (Apple ID) assigned to iMessage the syncing worked! this doesn't change the fact that my regular phone number shows up to non iOS5 devices I text... very strange for me too...
it does work however I had to change that setting in order to get it to work...
As for cant activate... I had that issue at first but after first day it worked fine...perhaps network lag or iMessage lag due to too many users in at once...

Issue with instant ringback when using sip trunk to SP

Hi all,
We use CUCM 8.0.2.
We have a SIP trunk to a SP connected via one of our Cisco 2911 routers configured as a CUBE.
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, RELEASE SOFTWARE (fc2)
c2900-universalk9-mz.SPA.150-1.M3.bin
Cisco CISCO2911/K9 (revision 1.0)
Technology Package License Information for Module:'c2900'
Technology Technology-package
                  Current       Type
ipbase        ipbasek9      Permanent
security      securityk9    Permanent
uc              uck9            Permanent
data           None            None
We also have several ISDN lines that run out via various Cisco routers configured as H323 gateways.
We use 7945 and CIPC for our phones.
We're having an issue with calls going via the SIP trunk where we hear ringing instantly after dialling - but before the actual device at the other end starts ringing (considerable difference).
Using the SIP trunk: If I make a call to my mobile phone - I hear ringing instantly - about 3 rings before my mobile phone actually starts ringing - undesireable.
Using H323 gateway: If I make a call to my mobile phone - I hear silence for a bit - then ringing when the mobile starts ringing - desired.
Using SIP trunk: If I make a call to a landline that is ready - it rings instantly for at least 1 ring - before the actual phone I'm calling starts ringing - undesireable.
Using H323 gateway: There is a momentary pause before hearing ringing on my phone and the phone I dialled - desired.
Using SIP trunk: If I make a call to a landline that is off-hook (with no call-waiting/etc.) - it rings once and then returns the busy signal (the worst issue) - undesireable.
Using H323 gateway: There is a momentary pause before hearing busy signal - desired.
Phone to phone internally (same network): Operates as expected (instantly rings locally and on the phone I'm calling). Between phones that utilise the SIP trunk and phones that utilise the H323 gateways within the same network - communication is instant and as expected.
Any ideas why this happens and how to stop it?
I want it to not ring until the situation is known and that it can provide the appropriate feedback (ringing/busy/etc.).
Some possibly relevant config (note that there is a known bug with this IOS that meant I had to declare the codec in each dial-peer as the voice class would not work):
voice service voip
address-hiding
mode border-element
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
header-passing error-passthru
early-offer forced
midcall-signaling passthru
interface GigabitEthernet0/0
ip address x.x.x.x 255.255.255.252
ip access-group acl.SIP-IN in
no ip redirects
no ip unreachables
ip verify unicast reverse-path
ip virtual-reassembly
duplex full
speed 100
no cdp enable
gateway
timer receive-rtp 1200
sip-ua
connection-reuse
gatekeeper
shutdown
dial-peer voice 1 voip
description *** INBOUND CALLS FROM CARRIER ***
translation-profile incoming SIPTRUNK-INCOMING
session protocol sipv2
incoming called-number #blah blah#
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 61 voip
description **** WA, SA AND NT NUMBERS ****
destination-pattern 0[8]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[8]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 81 voip
description **** MOBILE NUMBERS ****
destination-pattern 0[4]........
session protocol sipv2
session target ipv4:<MY SP's SIP SERVER>
incoming called-number 0[4]........
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
dial-peer voice 500 voip
description *** INBOUND SIP TRUNK TO CUCM PUB ***
translation-profile outgoing SIPTRUNK-CALLING-ADD-0
preference 1
destination-pattern 5[12]..
session protocol sipv2
session target ipv4:<OUR CUCM PUBLISHER IP>
dtmf-relay rtp-nte
codec g711alaw
ip qos dscp cs5 media
no vad
Any help or a point in the right direction would be greatly appreciated.
Cheers,
Brett

I ended up resolving this issue as follows:
In CUCM, under Device > Device Settings > SIP Profile.
I modifed the profile relevant to my SIP trunk, under the "Trunk Specific Configuration", I set "SIP Rel1XX Options" from "Disabled" to "Send PRACK if 1xx Contains SDP".
Now, I get the expected delay before hearing ringback.
Solved!

Any suggestions on how to fix installation issues with iPhoto & iMovie on used Mac mini?

I bought a used, mid 2011, mac min. The selller deauthorized all his applications and resotred it to factory settings for me. When I received it, I added myself as an administrator and deleted the dummy user the seller had created after restoring the OS. The first thing I wanted to do was install applications I already have on my iMac (also running OSX Lion). It would not install iPhoto or iMovie. It said these applications were assigned to a different apple id, the previous owner. I decided to erase the hard drive and reinstall Lion myself. I ran into some snags (due to my internet connection) and had to use recovery thumb drive, but it worked.
I successfully re-installed Lion on the newly formatted hard drive.
I still cannot install iPhoto and iMovie. It just give me an error now. Couriously, it installed Garage Band just fine. I haven't had any other issues with other applications I purchased on my other iMac.
Anyone have any suggestions, besides purchasing iPhoto and iMovie on the mac mini?

Ethernet cord connected to the router solved it. This is exactly what I had to do when I reinstalled the operating system. For some reason my wireless internet is highly inreliable. It drops out constantly. I've always had my iMac hard wired to the router, but I'll have to figure out a fix for this Mac mini. I can't have a 30ft ethernet cord running through the middle of my basement. Thanks.

Issues with iTunes Home Sharing using iPhone 6 Plus

Hi guys,
I'm having problems with streaming music and video on my iPhone 6 plus from my Macbook Pro (mid 2010 model) using iTunes' Home Sharing . I am able to stream without any issues using my iPhone 4S and my Apple TV, however.
I am using iTunes version 12.0.1.26, iOS 8.1.2, and OSX 10.9.5.
Using my 6 plus, I am able to connect to my iTunes library, both music and video. Album art shows up for music but no cover art for the videos. So, all in all, I am able to see the contents of my library.
However, when I try to play songs, a couple things may happen. First, nothing plays for about 10 seconds; then a second or two of the song plays followed by silence again, appearing as if it's buffering. Second thing that may happen is that a second or two plays immediately followed by silence. If I press next to play the next song, what usually happens is that nothing plays, although the song title does appear.
As seen in this video, I don't have any issues with my WIFI connection or internet speed, as demonstrated using the iPhone 4S and Apple TV.
I have no clue as to why this is happening.
Hopefully someone could shed some light with this issue. Please feel free to comment. I'm open to and appreciate any suggestions while Apple tries to find a solution. Thanks.

UPDATE
So, after working with the guys at Apple, they were able to provide a solution. Now I have no problems using Home Sharing with my iPhone 6 Plus!!!
(I should add that I have the Linksys Advanced Dual-Band N Router (E2500))
The issue was fixed by giving one of the wi-fi channels a different name, thus splitting the channels into 2.4 GHz and 5 GHz. Then, I connected my iPhone to one channel (2.4 GHz) and my MacBook Pro to the other channel (5GHz). In this configuration, I have had no issues streaming my music and video.
It seems that the problem is some kind of interference between both devices when using the same channel (i.e., when both the 2.4 GHz and 5 GHz channel share the same name).

Upgrade : Issue with Specical character being used in 4.6C ( Dynamic calls)

Similar Messages

Maybe you are looking for