Upgrade linux preview to SP13

I am trying to upgrade the linux preview of the WAS 6.40 and failing...
Could someone help me to understand the SAP upgrade process? I have downloaded and read the SP13 PDF but big questions remain open:
- The preview is SP7. Can I directly upgrade to SP13 or do I have to do each intermediate upgrade?
- When I do the upgrade of the ABAP part (directly to SP13) as stated in the PDF (unpack + move into exe/run dir) I am getting an error when logging in with the SAP Gui.
I am not that familiar with the update process in general but trying my best.

Hi Peter,
You need to upgrade to SP10 then SP11 .. SP13. You should move unpacked files to /usr/sap/trans before running SPAM transaction.
Cheers,
Sanjeev

Similar Messages

Upgrading linux-lqx with Aura

Hi,
I'm running into an issue upgrading linux-lqx with Aura..... please bare in mind though that I've just started using Aura so outside of simple pacman style commands I'm quite unfamiliar with it's more in-depth or advanced usage.
Basically the issue I'm running into is this:
patching file sound/usb/6fire/midi.h
patching file sound/usb/6fire/pcm.c
patching file sound/usb/6fire/pcm.h
patching file sound/usb/endpoint.c
patching file sound/usb/misc/ua101.c
patching file sound/usb/mixer.c
patching file sound/usb/usx2y/usbusx2yaudio.c
patching file tools/hv/hv_kvp_daemon.c
patching file tools/perf/config/utilities.mak
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --silentoldconfig Kconfig
* Restart config...
* DOS/FAT/NT Filesystems
MSDOS fs support (MSDOS_FS) [M/n/y/?] m
VFAT (Windows-95) fs support (VFAT_FS) [M/n/y/?] m
Default codepage for FAT (FAT_DEFAULT_CODEPAGE) [437] 437
Default iocharset for FAT (FAT_DEFAULT_IOCHARSET) [utf8] utf8
exFAT filesystem support (EXFAT_FS) [N/m/y/?] (NEW) aborted!
Console input/output is redirected. Run 'make oldconfig' to update configuration.
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_x32.h
SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_32.h
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
HOSTCC arch/x86/tools/relocs_common.o
HOSTLD arch/x86/tools/relocs
aura >>= Would you like to continue anyway? [Y/n] y
I've checked the PKGBUILD in /var/cache/aura/pkgbuilds and everything looks fine....
why is the input/output getting redirected and how do I solve this issue??
It seems to me that there are some new options which aren't in the previously configured pkgconfig, if this is the case how do I select the new options?
Of course I can build linux-lqx manually as I have done initially however, I would like to use Aura as it makes life much easier :-)
Thanks.

Using "makepkg" works no problem like I explained previously.... but that means manual download of the tar.gz file then compile and install.
I was really hoping for Aura to automate things to make life "sightly easier".
Aura is pretty good with everything else, including install/upgrade but just getting this to work.... if not then fine no worries but would be nice if it did work :-)
Last edited by JohnnySSH (2013-09-07 13:51:01)

Upgrading Linux OS with E-Business suite deployed

We have a Redhat Linux AS 2.1 with E-Buisness suite 11.5.9 deployed. We want to upgrade Linux to version 3 or 4. How can we do it?
Can we just stop the Apps services and upgrade the OS and restart the Apps services? or Will it work with cloning method?
Thanks in Advance

Definately relink everything.
As oracle, cd $ORACLE_HOME/bin
relink all
As applmgr,
cd $IAS_ORACLE_HOME/bin
./adlnkiAS.sh
cd $ORACLE_HOME/bin
./adlnk806.sh
adadmin
relink executables for all product groups
This is also a good time to upgrade to DST compliant JDK (5.0 is the latest).
Using J2SE Version 5.0 with Oracle E-Business Suite 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=304099.1

[SOLVED] Upgrading Linux 3.0.7-1 - 3.1-4 Breaks Wicd

As the subject points out, upgrading Linux from 3.0.7-1 to 3.1-4 seems to break Wicd on my laptop. When I do this, no wireless networks show up and if I plug in ethernet, I cannot connect to it either. I solved the problem by blacklisting the wicd daemon, unblacklisting the network daemon, and uncommenting interface=eth0 in /etc/rc.conf, then rebooting, downloading the older kernel (3.0.7-1) which I had unfortunately deleted from /etc/pacman/pkg, and downgrading with pacman -U. I wonder if anyone else had similar trouble with this update....
Last edited by tony5429 (2012-04-05 07:43:37)

Can't connect to anything with Wicd anymore either.
Using testing with:
Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
Intel Corporation WiFi Link 5100
WLAN networks will still show up and apparently connect — LAN ones won't — but Wicd fails to retrieve a IP as all dhcp clients consistently time out.
Manual connection (dhcpcd for LAN + wpa_supplicant for WLAN) works just fine.
edit: Doesn't appear to be caused by that kernel update on my system, though.
edit2: Apparently Wicd's configuration files — which had worked perfectly for months — somehow turned insufficient. I had it create new ones and now it works again.
Last edited by misc (2011-11-13 10:42:49)

Upgrading Linux OS

Hello All,
I am trying to find some information on upgrading Red hat linux OS from 2.1 to 5 but i am not able to find any. But i am able to see information on upgrading from 2.1 to 4. Is upgrading Linux from 2.1 to 5 is supported? Any information or link on the same will help me much
Kindly suggest
Regards,
Anand

Hello,
upgrading directly from RHEL 2.1 to RHEL 5 is not supported by Red Hat. You could upgrade from RHEL 2.1 to 3 and from there to 4 and then to RHEL 5, but since each upgrade can cause inconsistencies we recommend against it.
Backing up the data on the system and then doing a fresh install of RHEL 5 and then recovering the data from the backup afterwards is the recommended approach.
Regards,
Frank
Red Hat Onsite Engineer @ SAP LinuxLab

[SOLVED] upgraded linux 3.15.8-1 to 3.16.1-1 but uname showing 3.15

I am hoping I am just missing something simple with this.
After upgrading my laptop today from 3.15 to 3.16 my network adapter and Xorg stopped working.
Network adapter is giving me the error:
timed out wating for device sys-subsytem-net-devices-ens5.sevice
And Xorg is giving me:
(EE) No devices detected
(EE) no screens found
Well I have been googling around and checking out the Arch forums and came across a thread with the same Xorg error. When I was typing my response to it I realized:
uname -a
Linux MacBook 3.15.8-1-ARCH #1 SMP PREEMPT Fri Aug 1 08:51:42 CEST 2014 x84_64 GNU/Linux
What did I miss that the new kernel is not loading?
I am using Grub2 as a boot loader.
Last edited by kramlegan (2014-08-15 14:42:00)

I am unable to mount the boot partition now.
I get the error
mount: unknown filesystem type 'vfat'
It looks like it has to do with running the incorrect kernel.
https://bbs.archlinux.org/viewtopic.php?id=28437
the key is that the kernel is updated ( e.g. from 2.23 -> 2.24 ).
the vfat kernel module reside in difference directory (/lib/modules/XXXx-2.24/)after update.
but the kernel version in /proc is the old one , until you reboot.
if you don't reboot, when load the vfat module, the insmod will search the /lib/modules/`uname -r` , which can found nothing to load. well, what you get is nothing but some string like
# modprobe vfat
Any other suggestions on how to fix this?

[solved] After a full-system upgrade (Linux 3.15.8) = Wifi undetected

Hi, following this post, I'm seeking help concerning a big problem with my wifi.
In fact, it has been a few months since my wifi interface isn't recognized anymore. Yesterday, after a few tests, I found it was due to the kernel version, so I tried to reinstall my first ArchLinux (Linux 3.13.5-1-ARCH) : it worked, my wifi was back. The problem was that I couldn't reinstall all my stuffs : so I did a full-system upgrade (knowing I will lose my wifi) and now I just want to fix it once and for all (I'm done dealing with it).
So now, your help would be very appreciated. Does anyone have an idead? Or need more details about my config, my laptop, or whatever?
Last edited by nugetchar (2014-08-09 20:30:44)

Okay then, here we go :
When I do a
lspci
I have the following output :
[nugetchar@arch ~]$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
0c:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)
So, as you can see, the Network Controller is the following :
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
When I do a
ip link
this is what I obtain :
[nugetchar@arch ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether f0:1f:af:25:3b:13 brd ff:ff:ff:ff:ff:ff
6: enp0s20u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 6e:d6:2d:5c:29:bd brd ff:ff:ff:ff:ff:ff
I started reading this page but am not sure if it is relevant due to the fact it concerns the 3.8.2B version.
Finally, a
more /etc/modprobe.d/modprobe.conf
gives me the following output :
^C[nugetchar@arch ~]$ more /etc/modprobe.d/modprobe.conf
alias floppy off
blacklist fd0
blacklist floppy
blacklist ipv6
blacklist bcma
blacklist pcspkr
blacklist snd_pcsp
I think I need to unblacklist bcma ?
@ewaller : I just saw you reply, here is the output for ls /lib/modules
[nugetchar@arch ~]$ ls /lib/modules
3.15.8-1-ARCH extramodules-3.13-ARCH extramodules-3.15-ARCH
Thank you for your answers, I really appreciate it

Will Oracle 10.1.0.2 be ok after upgrading linux e3 kernel to 2.4.21-53.EL

Hi, all
I have an oracle 10g(10.1.0.2) database running on a linux server (RedHat Linux e3). The linux kernel is 2.4.21-20.ELsmp.
Because we need to upgrade the ASM to make the backup stuff run well, we have to upgrade the linux kernel. The latest linux e3 kernel is 2.4.21-53.ELsmp, but the latest ASMlib 2.0 driver is for 2.4.21-52.ELsmp.
Could I upgrade the ASM under the -53 kernel? Or we have to install the -52 kernel?
Thanks a lot!
Qian

Whether you can is far less important than whether you should.
Open an SR with Oracle Support.

Upgrading Linux java 1.4.2 AMD 64 bit edition with Daylight Saving Time

I am running 64 bit version of Java 1.4.2 It is the linux blackdown version because at the time Sun did not support a 64 bit version. Now I would like to upgrade java to fix the possible problems with the Daylight Savings Time change.
I have tried the tzupdater tool released by Sun but it did not work on my 64 bit machine, stating it could not find any tzone data to update.
Next I looked into updating the JRE itself but it appears that Sun still does not offer a AMD 64 bit version for 1.4.2 linux. They only seem to have support for 64 bit in Java 5 and 6.
Any ideas as to my best migration path? Should I consider taking the plunge and upgrading straight to Java 6 - although this will require updating Tomcat also and possibly breaking many of the 3rd party jar files we have in use.
Message was edited by:
Hatton

My OS configuration is identical to your (save for the graphics card) and I do not experience these issues at all. I run pop-up blockers, firewalls, etc., etc., myself, and even mess around extensively with my browser settings (for debugging my own development), and have only EVER experienced an apparent lock-up under one condition:
If an applet is signed, and pops up and dialog, OR if there is any other condition under which the PLUGIN displays a dialog box, and during this time your browser is no longer in focus, when you reactive the browser window, the dialog box does not appear in the front. What I'm saying is that there might be an active MODAL DIALOG box, but which is not being seen. These dialog boxes do not appear on the taskbar under windows (just like the calendar doesn't) but you can active it by using the Alt+Tab function of Windows. When I've experienced support calls regarding this sort of problem, I get the user to check Alt+Tab to check if there is a hidden dialog box (which is most often the case, since we used signed applets).
I'm also a little confused by your reference to http://www.giga-byte.com - this site doesn't even load an applet when I open it.

[SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
many modules such as wifi or psmouse are not loaded.
My PC is Asus Zenbook UX31E.
If I do by hand like
# modprobe ath9k
# modprobe psmouse
wifi and psmouse are OK,
but I want to set all necessary modules auto loaded.
* Output of lsmod of linux 3.9.5-1 was 87 rows
but lsmod of 3.11.6 (I attache below) is only 39 rows.
* Both
/etc/modprobe.d/
/etc/modules-load.d/
are empty on 3.9.5-1 and 3.11.6.
Please give me advice, thx.
Last edited by taro (2014-01-08 11:20:46)

Thx. The version numbers seem to be identical.
% uname -a [~]
Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
% pacman -Qi linux [~]
Name : linux
Version : 3.11.6-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.11.6
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64493.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 19 Oct 2013 06:25:12 AM JST
Install Date : Fri 08 Nov 2013 12:06:17 PM JST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : None
best regards.

OID 10.1.4.2.0 for Linux Preview Install

I am trying to install the preview. I am using example provided in OID-LinuxWorld-Demo-OAS_viewlet_swf.html.
Any insight on why this fails? see below...
[oracle@akaoradev-vm1 ~]$ su - root
Password:
[root@akaoradev-vm1 ~]# up2date oracle-oid
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching rpm headers...
Name Version Rel
The following packages you requested were not found:
oracle-oid
[root@akaoradev-vm1 ~]#

Yes, the linux is registered with Oracle ULN (Network only). This is a test VMWARE environment.
See below...
[root@akaoradev-vm1 ~]# date
Thu May 29 14:16:44 AKDT 2008
[root@akaoradev-vm1 ~]# uname -a
Linux akaoradev-vm1 2.6.18-53.1.21.0.1.el5 #1 SMP Tue May 20 15:36:52 EDT 2008 i686 i686 i386 GNU/Linux
[root@akaoradev-vm1 ~]# up2date --show-channels
el5_i386_latest
el5_i386_oracle
[root@akaoradev-vm1 ~]# up2date oracle-oid
Fetching Obsoletes list for channel: el5_i386_latest...
Fetching Obsoletes list for channel: el5_i386_oracle...
Fetching rpm headers...
Name Version Rel
The following packages you requested were not found:
oracle-oid
[root@akaoradev-vm1 ~]#

Upgrading linux 2 to linux 4 with 9.2.0.3

Hello,
I have a 9.2.0.3 on a node with linux 2. I want to duplicate the database to another box. This new box will have linux 4. What should be the strategy for doing this?
The database is not being backup and can be shut down during duplication. I am thinking of shutting it down cleanly. Do a backup control file to trace before shutting down. Install linux 2 on the new machine. Copy the datafiles from the old machine to the new machine. Edit the control file and init.ora on the new machine. Bring up the 9.2.0.3 on the new machine. Then upgrade the linux 2 to linux 4 on the new machine. But after this, what do I need to do with the 9203 on the new linux 4. Do I then do a relink? Are there documents showing how to do migration of 9i from one box to another box with the high os? Thank you.

Why not just install Linux4 on new box and install Oracle 9.2.0.3 on top of it,
after that you have good chance just copy over all the necessary files (control files, redolog, datafile, spfile/pfile etc), setup environment variables (ORACLE_HOME, ORACLE_SID etc) and bring up the database without any change.

After upgrade linux-firmware (20100606-1) lvm root will not be loaded

Hello,
I'm a newbie, although arch has been running for 2 years now on my server.
after I've upgraded the system today with linux-firmware (20100606-1) (from kernel26-firmware(2.6.33.4-1), coreutils (8.5-2), dri2proto (2.3-1) udev (157-1),initscripts (2010.06-2) and mkinitcpio (0.6.6-1), I did not see any errors and rebooted.
The result was an error that my LVM root could not be created.
I have a /boot that is outside lvm and then my root and home etc are in the lvm.
When looking closer at the creation of the kernel26.img I noticed that the usual usb, keymap and lvm2 were not created.
Why he did not make it now like before I do not know (maybe because of the upgrade of the mkinicpio?)
I've booted my system with sysresccd and edited the /etc/mkinitcpio.conf to include usb, keymap and lvm2 (in the order it normally is created)
Now the problem is that I do not have a clue how to solve how to build the new image, since I can not boot into my system to run the command:
/sbin/mkinitcpio -k 2.6.34-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
I've tried it with the lvm root and my boot mounted and then run an adjusted command but it does not work because it needs stuff from /sbin (like gen_init_cpio.
I've tried starting up from the arch2010.05 CD but after lvmdiskscan I get an error that the device-mapper driver is missing in the kernel.
(I've did a "modprobe md_mod" and "modeprobe -l | grep md-mod" shows kernel/drivers/md/md-mod.ko so I figure it is loaded.
How can I solve this?
Last edited by ruy_lopez (2010-06-21 19:49:10)

This is a part of the error message that is still remaining:
:: LRunning Hook [keymap]
:: Loading keymap... done.
:: Running Hook [lvm2]
Scanning logical volumes
Reading all physical volumes. This may take a while...
No volume groups found
Activating logical volumes...
No volume groups found
Waiting 10 seconds for device /dev/mapper/lvmroot ...
root device '/dev/mapper/lvmroot' doesn't exist.\Attempting to creat it.
ERROR: Unable to determine major/minor number of root device '/dev/mapper/lvmroot'.
You are being dropped to a recovery shell.
modprobe - l
kernel/drivers/md/dm-region-hash.ko
kernel/drivers/md/dm-log.ko
kernel/drivers/md/dm-snapshot.ko
kernel/drivers/md/dm-mod.ko
kernel/drivers/md/dm-mirror.ko
kernel/fs/reiserfs/reiserfs.ko
kernel/fs/jbd2/jbd2.ko
kernel/fs/jbd/jbd.ko
kernel/fs/ext3/ext3.ko
kernel/fs/ext2/ext2.ko
kernel/fs/ntfs/ntfs.ko
kernel/fs/mbcache.ko
kernel/fs/udf/udf.ko
kernel/fs/ext4/ext4.ko
kernel/lib/crc-itu-t.ko
kernel/lib/crc16.ko
So dm-mod is loaded and it seems he is processing the hook but he can not find the volumegroups.
With the rescue disk I can mount them so they are all right.
where should I look now? Any hints.
Last edited by ruy_lopez (2010-06-21 22:41:45)

Upgrading Linux OS on OMS server

Hi all-
Our group is in the midst of migrating our Linux servers from RHEL 4.5 to RHEL 5. I'd prefer to do a clean reinstall, rather than an upgrade. So, what's the best way to backup and restore Grid Control? Can I simply backup the database, reinstall Grid Control (including the database, OMS and the agent) after the OS upgrade, and recover the database and be back in business? Or are there configuration details buried in the EM directory structure I also need to worry about (i.e, are there things not stored in the database)?
Thanks!
Rob

take a backup of everything oms,db,agent once the os upgrade done
restore the backup and start all the service, if every thing is fine then don't do any additional thing and in case some problem is there then mightbe you need to some relinking to make everything up and running but try relinking only once it required otherwise no.

How to upgrade sneak preview NW 2004s from SP9 to SP12 ?

Hi Experts,
I've downloaded and using SAP Evaluation NW 7.0 (2004s) SP9 - Sneak preview.
Now wanted to upgrade from SP9 to SP12.
Can you please tell the process whether can we do this on sneak preview? If yes, then how to achieve it?
Thanks
Mohan Krishna

Hi Mohan,
Sneak preview is not meant to be patched, nor is it possible to patch it at all.
Regards,
Vinoth.M

Upgrade linux preview to SP13

Similar Messages

Maybe you are looking for