Upgrade + Lip sync

Hi,
Has anyone got terrible lip sync issue since the upgrade??
Before it was milliseconds but now its hideously noticeable.

cliveabishop wrote:
Its across everything - freeview and on demand stuff.
Tried it all - i've even taken all cables out and put everything back just incase something went wrong there.
And totally seperate This morning aswell it did something bizarre - i was looking through epg then box freaked out and displayed a green screen then started rebooting itself??
Nightmare. I'd unplug it and your home hub, leave it for 5 minutes then plug in the hub and wait as long as you can (at least 15 minutes) before plugging in the Vision box again. If that doesn't help then maybe a factory reset's in order, but I don't know how to do that on New Look Vision.

Similar Messages

  • Lip Sync Problem AFTER LG Firmware Update on some HD Channels

    I have an LG HDTV, model number 47LH90, and I'm experiencing lip sync issues even after they gave me a firmware update to solve the problem.
    I've noticed the problem appears to be most prevalent on the History HD channel.  Most other channels seem fine now following the firmware update from LG.  Any reason why this is  happening?  I have a couple thoughts to add for Verizon personnel:
    1) The Motorola STB/DVR I have from Verizon let's me choose my output as 720p, 1080i, etc.  It would be nice if it would also allow a pass-through option to just be whatever input the feed is.  For example, sometimes I wonder if this issue is because the DVR is trying to take 1080i input to the STB and convert it to 720p output to the TV, which somehow changes data lengths and results in some lip sync issue.
    2) I have a PlayStation3 that I bought to use mainly as a Blu-Ray player.  The PlayStation Audio/Video to my TV using the HDMI cable works great, with no lip sync on Blu Rays, Hulu, games, etc.  I know this lip sync is sometimes more prevalent on LG TV's, but it would seem to me that if PlayStation's can produce lip sync-free content, surely FIOS can too.  Perhaps they could upgrade their hardware and use the latest standards.
    3) I'm using the same make/quality/length HDMI cables on my PlayStation3 and STB, HDMI 1.3a.
    I would love to see some updates that address this issue as soon as possible. 

    1CoolMom wrote:
    We frequently have a similar/same problem but do not have a HDTV or programming. We have a  QIP6416-2 hooked up to a 12 year old Sony large screen TV (we won't buy a HDTV until Verizon gets a better, higher capacity DVR or until out contract is up and we can move on).  Often when we are watching a taped show (we tape almost everything) the sound and picture will get out of sync.  Think bad Japanese movie!  It makes me crazy as I read lips but my husband, although bothered, doesn't want to kill the DVR after a few minutes. We have found, by trial and error, that if we exit the show and then resume play the sound and picture return to normal. It also happens when we rewind on a currently playing show.  It happens almost every time I rewind a long ways (I do this when I watch 2 shows at once).  It is harder to get back in sync when this happens but it sometimes works if I watch and jump forward to be close to live and then jump between shows and only have to rewind a short ways.  I used to routinely watch 2 shows at once but now the aggravation factor makes me either tape everything or just not watch some shows I like.  I posted to let you know that it may not be the LG update and may be the DVR.  Try out my tricks when it happens, and if they work, I would blame the DVR.
    Thanks for the suggestion.  My problem actually seems to go away when the show is recorded versus live, at least sometimes, but not always.  Although, I've found that stopping playback, then resuming, or similar behavior can help the problem as well.  I just want my TV to work without having to throw salt over my shoulder.

  • Lip sync problems on Prisoner

    Has anyone had lip sync problems on the downloaded (to Apple TV) of episode 3 of Prisoner?
    I find that the speech is appx. 3 seconds ahead of the visuals. It's the same on the download to computer version also. Haven't contacted Apple support team yet as I first wanted to find out if it's a common problem.

    oldgroover wrote:
    They've refunded me for this episode, but not for the whole series which is now spoiled for me (and which I've canceled)
    That's the point really - it's a 6 part series and one messed up episode will ruin the whole experience and devalues the rest of the episodes.
    It's a shame they've not refunded all the episode costs to date to you or at the very least made some other kind of gesture of goodwill. What's worrying is an apparent lack of concern over all these itunes store issues that crop up - as a user you want confidence that when you're paying for what are in essence proprietary versions of DRM protected media that you can actually use and enjoy them properly.
    I have many music videos purchased in last few years which are now available DRM free with higher sound quality - I've upgraded may be 40% but a large proportion are not offered even though they are available - several reports to store support simply return a kind of stock along the lines of 'not all old purchases have been updated in the database yet as available for iTunes plus' - I mean it's gotta be over a year now since the store went iTunes Plus for music.
    I've resumed buying music video DVDs now - for the cost of 2 or 3 iTunes Plus music videos I can often get a DVD compilation fro the same artist cheaper.
    UK pricing is crazy, and I don't know if it's Apple or the media companies. I've mentioned the original Star Trek tv series that appeared on iTunes UK a few weeks ago - about 10 USD for series 1, but no £54 in the UK, and the previews show crap encoding with jaggies on edges everywhere.

  • Lip sync multi cam fcpx

    I use the latest version of FCPX. Used three cams and one audio track for a school musical registration.
    JVC HM100 - Sony VG20 - Panasonic GH2 - Zoon H2n
    In FCPX it seems to be lipsync. When exporting to quicktime or youtube/vimeo all is NOT lipsync.
    It already costed me 12 hours to make half of the registration now I discover FCPX really has issues to keep audio lip sync.
    Anyone any suggestions. I know next time I will try to use three identical cams...

    Both FCP-X and Premiere Pro now contain much of the functionality of Pluraleyes. I am not sure about AVID.
    harvestmedia wrote:
    FCPx is almost the same cost. I am thinking to upgrade my FCP is that's useful. I still have lots of uncompleted projects which I have half edited in FCP7. Will it be a problem to carry on working on those projects in FCPx?
    FCP-X is a completely different application that uses a completely new, unique and different editing paradigm. You need to download the free trial version to see what it is like. The only relation FCP-X has to FCP 7 is the name.  For some users of other editing platforms, the learning curve can be long and steep as the magnetic timeline in FCP-X has no equivalent  in other editing systems.
    You will not be able to directly migrate projects from FCP 7 to FCP-X. You can use a third party app called 7 to X to convert an XML of your project from FCP-7 to a format that FCP-X can understand (with some limitations).
    MtD

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar.  Totally stumped. Ideas anyone?

    After IOS8 upgrade IPhone5s syncs with exchange but IPad2 syncs ONLY Mail and Contacts, NOT Calendar.
    Also, my other tablet - Samsung TabS - has same issue - calendar wont sync. My IPhone and my desktop (windows) synch just fine.
    Google calendar syncs on all devices. Totally stumped. Ideas anyone?
    THANKS

    1.      Log onto Outlook Web Access
    2.      Top right hand part of the screen select "Options"
    3.     Select "See All Options"
    4.      Select "Phone" menu
    Check if you have 10 Devices registered.
    If you have, you need to delete one of them to add your new Smart Phone to Exchange for synching
    Check the "Last Sync Time" to indicate if this device is still active or not.

  • How do I get a lip sync flash frame sequence to encode properly

    I built a flash frame sequ
    ence in Premiere.  It is 2 seconds long with the
    first two frame white and the remaining time black
    frames. This is repeated for 1 minute.  If I encode it in non-compressed AVI it is correct.  If I use
    MPEG2 or H.264 to build a transport stream, I see two white frames
    as I would expect,then black frames for the rest of the sequence.  Over 15 seconds, I will start to see three frames, gray, white and gray again.  Eventually, the white or gray frame starts two frames later than it should.  I built this as a 720P/60 sequence with non-drop frame timecode.  I have tried all I frames and the same issue occurs.  The GOP structure does not seem to have an effect.  There is no audio in this stream.  It as if it cannot handle the quick and short transistion from white to black.  There are some advanced settings for MPEG 2 but I cannot see where they are explained in the Premier help document.  I need this stream to measure latency on a piece of video equipment.
    Thanks
    Ralph

    Bill,
    Your answer gave me a hint to what was happening.  I'm fairly new to Premier and took for granted that the preset I chose at the begining of the program would carry through to the sequence, wrong!  I found another discussion that talked about resetting the properties of a sequence.  I expanded the project box a little and saw that it said my sequence was 59.94 frame rate not 60.  I followed the instructions on the other discussion.  File, new sequence, general, editing mode, and frame rate.  The frame rate was set to 59.94 not 60.  I reset it to 60, closed all the menues and deleted the original 59.94 sequence.  The new sequence I just created shows a 60 Hz frame rate.  I exported my lip sync project as an MPEG 2 transport stream and it was correct according to our MPEG analyzer.
    Thanks again for the help.
    Ralph

  • How to delay the audio to lip sync? (of the entire system)

    I`m using a LED 32" LG screen via hdmi, but the audio is outputing directly via usb to my Mbox Mini, and the image have a small delay (5 frames) but the audio not, so the result is out of sync videos.
    Of course there`s tons of apps that can solve the problem by compensating, like VLC and MPlayer X, but the problem is that i`m a video editor and use FCP and Motion all the time. For playbacking with these apps (after making the 5 frames compensation) turns into a perfect results, but during video editing it`s a pain to lip sync.
    Of course as i know that the delay is 5 frames, when i output i could delay the entire audio, but it would be a pain making this everytime and for internet streaming the videos would still off sync.
    There`s anyway i can delay the audio of the entire system?
    PS: I`m using Lion 10.7,

    > I wonder if there is any way to delay the opening of a
    MIAW. In particular i
    > have the following
    If you want other activity to take place, you could use a
    timeout object:
    dialogue = window().new("D_XML_Test (Greek2)")
    dialogue.filename = "path to file"
    t = timeout().new("mOpenWindow", 60000, #mOpenWindow,
    dialogue)
    -- #movie script:
    on mOpenWindow aWindow, aTimeout
    if ilk(aTimeout, #timeout) then aTimeout.forget()
    if ilk(aWindow, #window) then aWindow.open()
    end
    If you don't mind locking out activity, you could use the
    delay()
    function, but I wouldn't recommend that approach

  • SWF poor quality and poor lip sync?

    I normally use After Effects and today is my first time experimenting with Flash.
    I create virtual presenters that are filmed against a green chromakey screen. I use Keylight in AE to key the green and replace it with different backgrounds. These are then saves as .FLV files.
    In my current project the client really wants SWF files. I have tried to convince them to accept FLV's but they won't take them. So, my task is to basically convert my high quality FLV files created in After Effects to SWF's.
    I've imported the FLV into Flash and exported it again as an SWF. However, the quality is very very poor and the video is playing at half the speed of the audio, which throws the lip sync off.
    Can some please walk me through the correct process of importing the FLV and converting it to a high quality SWF file? As this is my first time with Flash it will need to be a 'take my hand'  walkthrough as Flash is very new to me and I am not at all familiar with the softwae interface etc.
    The poor quality SWF I created is attached, as well as the high quality FLV I am working from. My task is to create an SWF that replicates the quality of the FLV.
    Many thanks.

    I would take what Kglad has said a little further. Lyp syncing a live action video of a person with flash is impossible. You could probably do it with some kind of animated figure.
    The client is not always right. Unless they have a limitless budget and are willing to fund you and a team for a year or so, I would suggest that you all take a look at why they want a swf.
    If they think it is because swfs offer good quality, scalable raster graphics, in a small file size...well they are wrong. For this kind of video the file size will be just as large or larger than an FLV and it won't scale up without getting pixelated.
    If they think it is because the swf is easy to play back and an FLV isn't...well they are kind of correct. But in that case the answer is to create some kind of player that plays back the FLV.
    Those are the only two reasons that I can think of why someone would say, "Oh we have to have a swf."
    Maybe there are others?

  • CC Audio plays out of lip sync from video - Version 6 plays fine.

    If I place a single DV NTSC video clip in a timeline in Premiere Pro CC (7.0.1 (105)) - the clip is out of lip sync. I have tried software/hardware rendering with no change.
    If I open the same DV clip in a timeline in Premiere Pro 6 - the clip plays fine.
    I of course cannot open the CC clip in version 6. All I am doing here is placing a single DV clip in the timeline to cut new start/end and export to MP4 - no effects, filters, nada. I noticed the MP4's were out of sync, then noticed the originals would not play right in the timeline.

    I cleaned the cache and re-opened the project - no difference.
    On all four of the clips I was working with the video was 5 frames early, so I ended up unlinking everything and shifting the audio 5 frames and exporting.
    I also noticed I am not seeing the closed caption display. I am going to uninstall/reinstall CC.

  • ITunes lip-syncing issues,

    Hi there, I was wondering if anyone can help me. I have recently bought a new laptop (inspiron 17R special edition) because of its supposed brilliance in media centre. However I have downloaded iTunes and my movies and the lip syncing is all out, I have tried restarting etc but that doesnt work, I am a bit of a computer novice so have read some of the other threads on here but got completely confused, if someone is able to help me and give me step by step instructions then that would be amazing!! Everything else on here works, quicktime and then on demand services and videos on youtube, it is literally just iTunes that has the problem. The movies start of fine but the drift out of sync, pausing helps for about 30s and then thats it. PLEASE PLEASE PLEASE HELP IF YOU CAN!!!! Thanks :-)
    system WINDOWS 8

    Welcome to the discussions,
    here are some more things to try, for example creating a new user account in windows: http://support.apple.com/kb/TS2830 or http://discussions.apple.com/thread.jspa?threadID=2358275

  • DVD Lip-Sync issues on HDTV playback

    Hi, was looking for info regarding lip-sync issues after burning a DVD in DVDSP. Playback on a monitor is grand, but playback on two HDTVs have shown the entire DVD, all tracks to be out of Sync by the same time. Is this anything to do with Progressive/interlaced fields? I know that HDTV and AV systems can have issues with the processing of Progressive streams and there can be a delay with the Video which can be adjusted in their system settings but i can't expect 1000+ people to all change their settings to accommodate my DVD! lol
    I shot on DSLR 25P, edited in Premiere in 25P, exported then i imported into Compressor and dropped the DVD: Best Quality 90min preset on it (MPEG-2 Video, 720 x 576 (1,048 x 576), Dolby Digital Pro 2.0 at 192kps). Then imported them into DVDSP and burned the DVD. I can't see in the preferences or anywhere in DVDSP whether this is a Progressive or Interlaced project so i don't know what my final output is onto DVD. Perhaps it just follows what is imported as an asset and im assuming at the moment to change that i have to change Progressive to Interlaced somewhere ealier in the workflow.
    Because I shot on DSLR 25P, edited in 25P i exported, after much trial and error, the files from Premiere as : Match Source HI-Bitrate:
    H.264 (as source)
    25P AVC Coding,
    1,920 x 1,080 AAC,
    Square Pixels (1.0)
    VBR 2 Pass
    48000 Hz, Stereo (L R),
    6.32 Mbit/s
    (For some reason when i tried to use Adobe Media Encoder for batch exporting nothing happened after it opened, so i chose all my settings from Premiere export and did all the files individually).
    So just to re-cap, why am i getting Lip Sync issues when burned to DVD and played back on an HDTV? and how can i correct this issue?
    Kind regards,
    Sai Kelly
    For anyone interested in the background:
    The reason i chose the above settings was because I was having severe issues in quality of the .M2V file for the green screen sequences during interviews, particularly with people's hair when i chose to export from Premiere or Media Encoder with any kind of DVD settings. I spent a few days trying different types of exporting, methods and presets. This was the best version and i stopped once i acheived this result. Might have been simpler to continue to try a 720p version of the above before importing to Compressor. Here is the issue, you can see the 'snowy' hair problem:
    some of the different settings i tried:
    Ignore 'Quality 50' below, i changed it to 80 or 100 after the screenshot and before i clicked Export.
    The "Match Source HI-Bitrate" gave me the best results (blue background re-added in After Effects):
    Kind regards,
    Sai Kelly

    Hi Ann,
    Thank you for your opinion, though i disagree.
    As i said above I did try exporting directly from Premiere as Mpeg2 in many versions when i was attempting to solve the issue by changing the Bit Rate. But to no avail. The above screen shots were attempts to export a 'highest quality option' for re-encoding with a software  designed specifically to compress. I don't like re-encoding as much as anyone else, but this was the only option left as Media Encoder didn't help and without beginning again and using Encore. The same would have had to happen with Encore anyway as there appears to be no Dynamic Link in Premiere Pro CC to Encore as there wasn't yet a version of Encore CC.....just checking there....After Effects and Premiere have new updates just released Media Encoder CC 7.1 which i will check out but still nothing from Encore.
    I don't think you can help me with this particular issue, Ann and i'd like to hear from some other voices. Unless you have any thoughts or suggestions that will help with the Lip-Sync issue.
    Thanks again,
    Sai

  • Lip-Synced Music Videos for YouTube?

    I have been creating music for 20 years (home studio), and would like to create videos for some of my original songs (currently on mp3 or wav files), then upload to YouTube.  I know virtually nothing about video or video editing.   I was wondering if Premiere Elements would be a good editing application for my purposes.  For each video, someone would film multiple video takes of me lip-syncing to a pre-recorded song.  Is Premiere Elements sophisticated or precise enough to allow excellent synchronization between separate video clips and an audio track for lip-syncing purposes?  Would you recommend something else (for PC)?  Thanks.
    Greg

    Greg,
    The ONLY advantage to PrPro in your stated need, is to do the Audio editing in Audio Units, but then as you are working in Audio already, you probably have a favorite DAW, and that will give you even more control. That is NOT to say that PrPro does not have other pluses, but just not that would likely apply here. Hey, one's gotta' get something for the extra $600, right?
    I'd get the trial of PrE 9.0, and test with it. There are a few limitations on certain formats, but it's pretty full-featured for a trial. Just know that it will place a watermark on the Exported/Shared footage, so you cannot deliver/upload that, and get clean, watermark-free footage.
    Unless I missed something (I do most of my editing in PrPro, so do not put my PrE through all of its paces), the operations will be almost identical.
    For syncing, just remember to work in Timeline View Mode (only way to work in PrPro), and turn Snap OFF (the S key togglesn Snap), otherwise, you will be trying to force little increments, and the Audio will jump about, and Snap onto cuts, etc. Just toggle it back on, when you go back to the Video editing, as it makes general alignment much easier.
    If one is doing any Speed change, PrPro might be a bit easier, and offer more control, but not THAT much.
    Now, if you do not have a DAW, that you love, then you might consider the CS5.5 Production Premium suite, with Audition included. One can easily do some pretty heavy-duty Audio work in that program. My workflow would be to edit the Video, and then Import the Audio and the Video into Audition, where I would tweak the Audio to perfectly (within that 1 Frame for Video), while watching the Video. Audition will offer the ability to work with Envelopes for the Audio, and adjust the Speed almost infinitely, while maintaining Pitch. However, that is not a cheap suite, and there will be a bit of a learning curve, if one has not used Audition, or a similar DAW before.
    Good luck, and let us know how the PrE trial works out.
    Hunt

  • Apple TV2/Netflix Lip-Sync Issues

    Although Netflix plays with no problems on my PC using the same wireless network that my Apple TV uses, I am experiencing severe lip-sync issues when viewing Netflix on my Apple TV2. Audio is around 400-500ms behind the video. I am connected to my TV via the HDMI out. Video and audio are perfect, just not in sync.
    Any thoughts?
    Thanks,
    Chuck

    I also assumed that it was the ATV2, but then i streamed a large h.264 file from itunes on my Mac, the Apple October event from the podcast section directly from Apple, and no issues, went back to NetFlix, loaded up another movie "Superman Doomsday", and no lip-sync issue, went back to the original file, "Rocky Horror Picture Show" and lip sync galore.
    I think its NetFlix creating a separate encode for ATV2 and those encodes are probably still underway, again, this is merely a guess, but its consistent with the YouTube experience, as certain videos that appear on YouTube do not appear in the Apple iteration of YouTube (iPhone, iPad, ATV2). A great example is Kanye West Runaway. It's a 30 minute long form film and appears on the YouTube, but does not appear in the YouTube IOS application.

  • Magpie or Papagayo Lip-Sync?

    Ok, I've just gotten through learning Anime Studio Pro. It's like Toon Boom. I've been wanting to learn how to do character animation for a while and Motion is not the perfect solution. Cool thing with Anime Studio is the "bone" structure so you can build and manipulate characters and design custom "actions" to do common things.
    Phenome Lip-Sync (exact mouth move matches) is done through an external program, either Magpie or Papagayo. Papagayo is free, but REALLY limited. But it basically makes a .dat file which consists of list of keyframe/frame positions and a corresponding "switch-layer." Makes it very easy to program lip moves quickly and send to Anime Studio Pro, or After Effects, Maya... etc.
    My question is this : This concept of a switch layer is really powerful: Is there a way to do this in Motion?
    FYI : A switch layer is like a group with a number of layers/drawings in it. Only one can be visible at a time. SO you can click on one and the others will all not be visible. Perfect for lip moves or expressions, hand positions, etc.
    Motion seems to be limited to having to keyframe the opacity of EVERY other layer to do this.
    Message was edited by: Adam - Trigger Studios

    Wow! Okay that is the problem with someone who has never used scripts trying out a script with thin documentation. I was looking for the script in the "Scripts" menu. I now see it under "Window". Thank you Paul.

Maybe you are looking for

  • Error -2147417846 in Word_Get_Range.vi in Report Generation Toolkit RGTK

    Hi, in my large app there's a need to report lots of text results to various positions in the report. I've created a template with roughly 200 bookmarks. And I've got a wrapper around 'Append Report Text Str.vi' that stores an array of strings at an

  • Iphoto seems to be gone..

    Clicked on the iphoto icon today and nothing happened, the program would not open. I tried again and a question mark appeared onto of the iphoto icon. then restarted the computer and the iphoto icon is not in the dock. I have all my photos in my phot

  • The disk you inserted was not readable by this computer-I KNOW!

    Hello Does anybody know how can I make the Finder ignore a certain volume and not prompt me to initialize it every time I plug it in? I have an external disk encrypted with a third-party utility (TrueCrypt) which means that OS X cannot mount it. The

  • Gmail note doesnt appear in my phone.

    hello, im using iphone 5 iso 7. my gmail on my PC has 30 notes, but when i check on my note app i only see 4 notes. i have already sync to itunes already, still nothing.  also when i open up gmail app, the note doesnt even appear in my gmail app.  ho

  • SQL LOG FILE SIZE INCREASING

    Hi DBA's SQL Log file size occupies more disk space on the server, the overall database size is 8GB How to decrease the SQL LDF file size on the server, please explain the suitable steps to perform Thanks DBA