Upgrade macbook pro Snow leopard v 10.6.8??

i want to upgrade my Macbook pro (10.6.8.) when the new Mountain Lion is released. My question is : Can i do it, without having to go to the 10.7x version, and if i do it, will i lose all my applications , like Iwork? and is the IWORK for free or u have to pay for it? Thank you so much for helping me.

As I said. If your version of iWorks is a PowerPC version it will not work on Lion or ML.
Sorry but I have never worked with iWorks, have no idea about the versions of iWorks and or if they are PPC apps or Intel based apps and what versions are what.
If it is a Intel based version it will work on Lion and ML.
If it is a PPC based version it will not work with Lion or ML.

Similar Messages

  • MacBook Pro (snow leopard) 2006 will not restart. Getting blank screen with folder (?)

    MacBook Pro (snow leopard) 2006 has begun to turn off attached Cinema Display over the last two days. Comes back on on restart. This morning, the MacBook screen also went blank white on restart. Tried to use Snow Leopard CD to restart but it was ejected and folder with ? is only thing that displays. Will not restart. Have replaced hard drive 6 months ago. Help! What's wrong? I need this computer for work.

    hawpotr wrote:
    1. replace my current internal HD and convert it to external HD for use as secondary boot drive,
    No.  That has no advantage for you.
    leave the internal HD alone and purchase an external HD that I can clone and use as boot drive in case of emergency?
    Yes.  I use Carbon Copy Cloner to make a boot drive and as a backup (in addition to Time Machine).  CCC allows one to make incremental changes as well as creating a copy of the recovery partition.  This means that if run on a proper schedule, you data will; be well protected and the MBP can be in operation very quickly if the internal HDD should fail.
    A clone should be a 2.5", 9 mm thick SATA HDD so that it will fit inside the MBP.  It can be powered from the USB port thus not requiring an AC outlet.  In my collection of HDDs, I favor HGST and Seagate products.  I principally use OWC enclosures that allow for USB, Firewire and eSATA connections.  These are expensive but one can use a more modest one as well of one can tolerate longer data transfer times.
    Here is a link showing some available SATA HDDs that will complement your MBP:
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    You can look for enclosures on the same web site.
    Ciao.

  • Macbook Pro Snow Leopard; WiFi keeps dropping, no IP Address

    Macbook Pro Snow Leopard; WiFi keeps dropping. Issue is Macbook is not getting an IP address from the wireless routers DHCP Server. Tried all options in the forums. Reboot, changing security, PRAM reset .. nothing. Problem keeps happening. No issues on XP laptops and Nokia phones.
    Even the iPhone, iPod and iPad seems to be fine. It is just the dang gam it Macbook pro and it is driving me crazy.
    All fixes tried, changing wireless mode, security, PRAM ... only thing left is to rebuild the mac which i was hoping I can avoid somehow.
    Any ideas to fix this would be great!
    RK

    Change your router channel.  Sometimes this all you will have to do.
    System Preferences/Internet & Network/Network
    Unlock the padlock
    Locations:  Automatic
    Highlight Airport
    Click the Assist Me button
    In the popup window click the Diagnostic button.
    System Preferences/Network- Unlock padlock.  Highlight Airport.  Network Name-select your name.  Click on the Advanced button.  Airport/Preferred Networks-delete all that is not your network.
    Place a check mark next to "Remember networks this computer has joined."  Click the OK button and lock the padlock.  Restart your computer.
    http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
    No internet connection (wireless)
    Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
    Delete all extra entries that you find.
    Place a check mark next to "Remember networks this computer has joined."
    How to diagnose and resolve Wi-Fi slow-downs

  • Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

    Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

    Well, you can try easing the shift key up with something thin but flexible (credit card sort of thing) but if the contacts below are stuck you may need to get it seen to by an authorised repairer.
    If you can borrow a keyboard (a PC one will probably work as long as the password is alpha-numeric with no special characters) you can at least get in to backup your HD before going for repair.

  • Printer says "sending data..." and doesn't print (photosmart c440 & macbook pro snow leopard)

    Hi, my photosmart C440 printer suddenly stopped working and wont print. The message says "Sending data..." forever but never prints. The printer is on but doesn't respond to what my computer says. I have a macbook pro snow leopard OS. This has never happened before, I didn't make any changes to the system. When the problem first appeared, I reinstalled the driver and was able to print once, then it stopped working. Then I installed snow leopard and it stil doesn't work.
    Thank you!
    This question was solved.
    View Solution.

    Let's reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have OSX 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD. Can someone please give instructions?

    I have an OS X 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD.
    Can someone please give instructions?

    Welcome to the Apple Support Communities
    To restore the MacBook Pro to factory settings:
    1. Make a backup of your files because everything will be erased.
    2. Insert the Snow Leopard disc and press the C key while your Mac is starting to start from the DVD.
    3. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
    4. Close Disk Utility and install Mac OS X

  • Why does my macbook pro, snow leopard get so hot so quickly?

    why does my macbook pro, snow leopard get so hot so quickly?
    Can someone give helpful suggestions on solving this problem?
    Thanks!
    NELLY

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.

  • MacBook Pro Snow Leopard battery life

    Okay, I've been poring through the threads for days now to try to find a solution to this . . .
    I have two different MacBook Pros (a 15" 4,1 and and a 17" 1,2). I've upgraded both to Snow Leopard. Each is now running 10.6.6.
    After uprading, both started suffering extremely poor battery life, losing nearly 1% each minute, even when the Mac is sitting and doing nothing.
    I've done all the fixes I've found (recalibrating the battery, resetting PRAM, checking for rogue processes, etc.), and so far nothing has fixed the problem. I even bought a new battery for the older Mac, and that had absolutely no effect.
    Some of the threads I've seen here go back for more than two years.
    Has anyone solved this problem? I'm at the end of my rope!

    1% a minute?
    You're quite right - this problem has existed for years. Apple bases its power estimates on a device half intensity, using Energy Saver, and SL is supposed to have better battery performance than Lion.
    Something is causing your battery to die on you. Check off the following one by one to make sure there isn't another problem:
    1. Are you attached by USB? If you leave your MBP attached to a USB device or Firewire cable, you can lose battery power even if your computer sleeps. Disconnect all devices when you're not using them.
    2. Are you using Energy Saver? Your machine may be sapping energy by being at high intensity. Instead, opt for a monitor at half or three-quarters brightness.
    3. Losing battery even while sleeping? That problem can be addressed by going to System Preferences/Bluetooth and disabling Bluetooth.
    4. Are you losing battery through heat? You can lose battery capacity with a system that's hot all the time. Keep your machines as cool as possible, through energy management, getting a laptop cooler, or using free applications like Fan Control.
    5. Limit your losses. Use a power cord whenever convenient to increase your real-life battery time.
    6. Some applications, like Skype that are on all day, sap battery power. If one such application is on all day (or close to it), this may be part of the issue.
    7. Don't upgrade to Lion. This OS demands twice as much power as SL.
    I don't want to minimize the significance of the issue, but take a look at which processes are drawing power. You might want to go to Utilities/Activity Monitor at take a look at which applications are consuming your CPU.

  • Upgraded macbook to snow leopard & ipod does not connect

    I recently upgraded my macbook to snow leopard, now my ipod touch will not come up in itunes or on the desktop. I have tried the troubleshooting suggestions, but nothing has worked.
    How do I fix this?

    It would be very helpful if you told use what troubleshooting you have tried. Have you tried:
    http://support.apple.com/kb/TS3540
    (Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart)

  • Macbook pro snow leopard 10.6.8 with VMsoftware partition can i upgrade to Yosemite

    I have a MacBook Pro laptop bought in 2010 using Snow Leopard 10.6.8. 4 GB of Memory and 2.66GHZintel core i7.  I have also partitioned the drive with VMware to use a windows application.  If I have backed up all personal photos documents, music, movies etc and I don't mind if I lose all the info in the partition VMware, is it ok to 
    update to Yosemite. Is there anything special I need to do, like uninstall the VMware first?  Also do I need more than 8GB on my hard drive?
    Any one done anything similar and if so were there any issues?
    thanks for any help,
    musemhp

    VirusBarrier needs to be uninstalled using the original installer. That installer will have a button that allows you to uninstall the software. If you no longer have the original installer, you will need to re-download it.
    BitDefender must be removed using the uninstaller provided by the developer. That uninstaller is found on the .dmg file that also contained the original installer. If you no longer have that, you will need to re-download it.
    Do not try to locate and remove these items manually! They must be removed using the uninstaller!
    Note that it's a bad idea to have two anti-virus programs like these installed and active at the same time. That can easily cause all manner of problems, including serious performance problems. For more information about protecting yourself against malware, see my Mac Malware Guide.
    You also have SpeedIt installed, which is a badly outdated program that has been discontinued. The developer is no longer in business. I would be surprised if it wasn't causing problems. Unfortunately, because it is so old and the developer's site is gone, I cannot find any uninstaller or uninstallation instructions. See if you have a SpeedIt uninstaller somewhere. If you still have the SpeedIt installer somewhere, that may include the uninstaller.
    If removing those programs doesn't fix the problem, the only other third-party kernel extensions you have installed are:
    com.markspace.driver.Android.RNDIS    1.2
    com.roxio.BluRaySupport    1.1.6
    You'll need to remove those using the uninstaller provided by the developers (markspace.com and roxio.com).

  • MacBook Pro - Snow Leopard Upgrade issue

    Just installed Snow Leopard on a 2.53GHz MacBook Pro (summer '09). The machine continues the pinwheel at bootup forever, never actually doing anything. No error, no freezing….just endless.
    Any ideas of what this could be?

    Basically, I went from 10.5.8 for a friend, installed Snow Leopard on his MBP, and during reboot it just gets stuck.
    Repaired Permissions
    Repaired Disk
    Reset SMC
    Re-installed Snow Leopard.
    Now unsure what to do. Couldn't do an install of Leopard 10.5 except the Erase or Archive. The archive wouldn't allow me to check "Preserve users".
    Does that mean I will erase all his data like documents, etc? Either way, I'd rather not have to cross that road. There must be a reason it is just sitting there. I walked a mile to grab a pack of smokes, came back and it was still just spinning endlessly, failing to boot I suppose.

  • MacBook Pro Snow Leopard Software Upgrade Help!

    I recently upgraded to Yosenity, and noticed my computer lags a bit (spinning wheel thing). I downgraded back to Snow Leopard via cd. Now my iTunes will not read my iPhone and when I upgrade the software, it is stuck on that aura screen. What should I do if I want to stay in Snow Leopard?
    I assume I need to upgrade to the latest Snow Leopard to get my iTunes working properly. I think I would want to download iTunes 11 after I update Snow Leopard. Is it possible that since the updates need the internet that Apple does not support Snow leopard upgrades anymore?

    Ok so I solved it I think. I restarted my comp, hard restart and then only checked Snow Leopard and ITunes to be updated. Now that seems to be updating itself like normal.

  • MacBook pro, snow leopard, iPhone and Bluetooth PAN problems

    Short Version:
    I am having connectivity issues connecting my new MacBook Pro (MBP) to the Internet thru a Bluetooth PAN on my iPhone4. This has been working fine for a few days and then today it just stopped working responding that my iphone connection is not available, it's off, too far away or whatever. This is not the case. When I try to connect the iPhone to the MBP the iPhone is saying my MBP is not supported. I can pair the devices, but as soon as I try to connect to the Internet thru the iPhone via the MBP the connection fails.
    Long Version:
    I received a shiny new MacBook Pro only a few days ago and I am having Bluetooth Paired networking issues as of today, 2nd, March, 2011. The MacBook Pro is running Snow Leopard 10.6.4, and is brand spanking new, unmodified, factory defaults.
    The iPhone(s) I am using are iPhone 4's with iOS 4.1
    On the first day I paired the MBP with both iPhones with ease, it was so easy my grandparents could have done it. So point and click and it just worked....
    The iPhones are set up in iTunes with names similar to dave1 and dave2
    On the MBP I can select which device I want to connect to the Internet by going to the Bluetooth icon and connecting to whichever iPhone I have handy at the time. Since the plans are limited connectivity, I do load share between the two.
    Today, for no apparent reason, I have been unable to connect to my wife's phone just getting a basic "The Bluetooth network is unavailable" message telling me the iphone is out of range, not on, etc etc etc. Not true.
    No problem, I just connected to my phone instead. Occasionally I tried her phone again, but it just never worked. I eventually got her to reboot it, still no joy.
    Then, a couple of hours ago, while in the middle of reading my rss feeds, my Bluetooth connection dropped out. My phone is sitting right next to the MBP. So that's not the issue. No amount of reboots of either the MBP or the iPhone have fixed this. I have unpaired and repaired the devices (on both phones) countless times. I have removed the sim card and rebooted, I have disabled and reenabled Bluetooth on both, rebooting before doing this, and after and during, I have reset network settings. Nothing I try is working here.
    Pairing alone is an event, but here's an example of what's happening:
    I go thru the motions, the MBP shows me a number (eg, 451234) and the number is displayed on the iPhone. They see each other. The numbers are the same. Good. I click PAIR on the iPhone and MBP and everything appears good. But then if I go to connect to the iphone on the MBP I get the out of range error.
    I have made both discoverable, and tried to connect to the MBP from the iphone, and got a different error message altogether: Connection Unsuccessful - "{insert my name}'s MacBook Pro" is not supported. W-T-F? It was an hour ago? What has changed?
    Then, the only option on the iPhone is to "Forget Device". ok, forget it, and start again. Same same.
    Neither the iPhones nor the MBP have been upgraded or changed in anyway today, or even recently. In fact, as mentioned earlier, I was actively using the connection without any issues for a number of hours when it just stopped for no apparent reason.
    Not that these matter, but I am in Thailand (live here for the time being), I'm on the TrueMove network, which offers 3G coverage in my area (Patong Beach).
    This could easily have been filed under MacBook Pro, iPhone, OSX and possibly many other discussion headings, because the issue can be any or all of the OS, the MacBook Pro Bluetooth adapter, the iPhone Bluetooth, (iOS for that matter), or some other unforeseen conditions...
    My head is sore from pulling my hair out. I am open to any suggestions (reasonable or otherwise!)
    For further info (not that this post is long enough already, or anything, but), I thought it was interesting that the phones didn't fail at the same time, so I pulled out an old iPhone 3GS and set it up, but after pairing, the two can still not connect.
    I know its not an issue with the data plan on the iPhone since I'm here surfing now without an issue, so it's not a data problem.
    Open to ideas....
    If you've read this far and you're ever in Phuket, give me a call... I'll shout you a beer

    Ok, now I do wish I could edit....
    I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
    So, I kept playing, and playing some more...
    I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
    I didn't remove the Ethernet, Firewire or Airport Network devices.
    Now, I have done so. I REMOVED EVERYTHING
    No pairing, no network devices.
    Bluetooth was already turned off, and I rebooted.
    I turned off tethering and rebooted the iphone.
    I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
    I opened a web page, no go... d4mn, I was close...
    Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
    Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
    So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
    Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

  • Cannot install GoLive 8.01 0n new MacBook Pro/Snow leopard

    Purchased a brand new MacBook Pro (with the new Snow leopard) so I could leave my house and still work.
    The most important application I use is Adobe golive CS2 8.01.
    I have the 6.0 disk, and the upgrade registration number but they will not install in the MacBook Pro/Snowleaopard. I've tried 50 times. It will allow an install of the 6.0, but says my registration number is invalid for the upgrade.
    Adobe doesn't support the product anymore on any level. I'm beside myself. The laptop is worthless to me without that application.
    I've tried replacing the keylogin, prefs reinstalls etc... nothing.
    I'm desperate. If anyone has any ideas, please help.
    g
    Regards,
    George Edgar Joyce III
    JoyceMedia

    George Edgar Joyce III wrote:
    hang on a second...
    GL CS2 and ( both work on snow leopard. Matter of fact Adobe LiveMotion works on Snow leopard! Howe3ver, you cannot open your se\aved documents... still working on this too....
    but, GL works great with SL....on my desktop, golive was already installed when I upgraded to snow leaopard... works great...
    I doing a clean install on the laptop..that's where I'm stuck...
    wonder is you upgrade with GL INSTALLED ON YOUR LAPTOP...IT SHOULD STILL WORK...
    let me know if you try it..
    i'm thinking of downgrading the OS on the laptop, install GL and then upgrade back to SL... too much freakin work!
    g
    Downgrading, install GL, then upgrade sounds like a good move. Let me know if it works... if you do it. I understand the frustration of having to go to all this trouble. I've had my share of problems lately. First my MBP hard drive went bad. Had to reinstall everything. Then I took it on a trip so I could keep up with client work, and it died again. Took it to Apple in Portland, Maine. They had to ship it off for repairs again. This time the Logic Board and Video Display. Now my G5 is acting up again. Often too busy to deal with it.
    I'll follow along to see how things go for you. Keep us posted if you would.

  • MacBook Pro, Snow Leopard and Exchange Server

    My wife is considering a MacBook Pro for her business (we have one at home). At her work they have Exchange Server. With our home MacBook Pro I have been able to connect to her Exchange server through Entourage. (however I think her Exchange server is version 4 and not 7). Anyway, we are getting mail, contacts and her calendar through Exchange but we are not getting shared calendars and I don't know how to access her files on the Exchange server. I really want her to buy a MacBook but we need to make sure that shared calendars and file sharing works. Can someone inform me about this?
    Her company is upgrading to Exchange server 7 in December and I know that Snow Leopard allows Exchange to work through Mail, Address Book and iCal. Again, I need to know if calendar sharing and file sharing can work. Thanks.

    Hello,
    Wondering if you had any luck getting this issue resolved (I have the exact same question).
    Thanks,
    -Todd / Chicago

Maybe you are looking for