Upgrade Many CUE modules in the same time

Hello,
We have about 320 branches contain CUEwithout going to every module one by one? modules need to be upgraded from version 7.1.7 to 8.5.1. Is there a way to install all of the modules one shot without upgrading one by one (Please note that we dont have any cisco nms or managment software for such purpose).
Appreciate your help.
Thanks,
Amr Sherif

Cisco doesn't make such an application, so you would have to write it yourself, or engage a programmer that can do it for you.

Similar Messages

  • CS3 Camera Raw Too Many Files Open at the Same time alert!!!

    Please help me. I keep getting this error message in Camera Raw that says there are too many files open at the same time - but I only have 100 open:( Please help - I was getting this error with CS2 and thought upgrading to CS3 would fix it and it didn't!!!

    > "10 or 100 - you can quickly go through a stack of images in ACR and make any desired changes you want. Whether making the same or similar adjustment to similar files, or making radically different adjustments to different images as appropriate".
    I've done this with far more than 100! I think my maximum is 425 raw files, invoking ACR from Bridge without Photoshop even loaded, and it worked well. (I've also done 115 JPEGs in order to crop them under extreme time constraints).
    It can be very slick. For example, if I use a ColorChecker a number of times in a shoot, it is easy to select just the set (perhaps 100 or so) that a particular ColorChecker shot applies to and set the WB for all of them.
    Furthermore, in case people don't know, you can set ratings on raw images while many of them are open in ACR. (Just click under the thumbnail). It isn't as powerful as Lightroom, but it is not to be dismissed.
    I suspect that it is possible to apply sensor-dust-healing to lots of images in the same way, and certainly it is easy to apply presets based on various selections.
    Perhaps with AMG (Adobe Media Gallery) it will be sensible to use the above capability to process 100s of raw files, then create a set of web pages for the best of them, in not much more time than it would have taken in Lightroom. I judge that Lightroom is the "proper" tool for the job (perhaps after 1.1!), but Bridge+ACR can go a long way.

  • How you create a group to send many txt msg at the same time?

    How you create a group to send many txt msg at the same time?

    The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.

  • Upgrade and change plan at the same time

    My husband and I have phones on the old Family Talk plan. We want to upgrade to iphones and at the same time, switch to the More Everything plan. I can't seem to find a way to do this. When I start with the upgrades I am only given the option to add data to our current plan, not to change the plan completely. Do I change the plan first, then come back and upgrade or vice versa?

    Try voice chatting with a rep on Verizon's website. It's under contact toward bottom of page. I would think you need to change the plan first then the phones, but I would check with them.

  • How many EoIP tunnels at the same time? (One Anchor -- HA Pair )

    Hi Experts,
    With AP SSO, there should be two CAPWAP tunnels between an AP and the HA controller pair at the same time. Is it correct?
    Then how many EoIP tunnels between the internet anchor controller and the foreign controller HA pair at the same time?
    Thanks
    Cedar

    Hi Cedar,
    in AP SSO, only single CAPWAP tunnel maintan at a time & see the below reference for details.
    http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml
    There is only one CAPWAP tunnel maintained at a time between the APs and the WLC that is in an Active state. The overall goal for the addition of AP SSO support to the Cisco Unified Wireless LAN was to reduce major downtime in wireless networks due to failure conditions that may occur due to box failover or network failover.This allows the access point (AP) to establish a CAPWAP tunnel with the Active WLC and share a mirror copy of the AP database with the Standby WLC. The APs do not go into the Discovery state when the Active WLC fails and the Standby WLC takes over the network as the Active WLC.
    in the same sense, EoIP tunnel limitation will be 71 for a anchor controller. See below
    https://supportforums.cisco.com/thread/2123756
    HTH
    Rasika
    *** Pls rate all useful responses ****

  • Connectivity issues because of many users on at the same time.

    I notice this has been getting worse and worse, and last night my wife almost didn't get on in time to finish a college assignment.My wife noticed that there were about 7 or 8 people online at the same time. It seems anytime there are 5 or more we cannot connect at all.
     After a few hours we noticed there were only 2 people online, and what do you know we got on right away. Is it possible that over the years we have exceeded our bandwidth and now are just too overloaded? It sure seems that way, and was pretty much proven last night.
     Is there anything I can do about this? love to switch to FIOS ,but I'm afraid our mayor is in bed with Comcast (so to speak), so chances of getting FIOS here are pretty much nonexistant.

    Without knowing which router you have (Verizon has supplied several different DSL router/modems), it is hard to give specific directions for your specific router.
    1). You can determine your speed by connecting to your router (http://192.169.1.1) and logging in.
    Usually the user id is Admin and the password is passwd or password, but on some routers there is a sticker that identifies the password. If nothing works, try reseting the router. Once you are logged in, print out the 'transceiver stats', that will tell you what the speed on the link between you and the central office is. If you post that information, we can also tell you if your line can support a higher speed than you currently have.
    2). Once you are connected to the router, you can also check the wireless settings. If you have never set it up, it may be an unsecured network, in which case anyone can use it. You probably want to change that. While everyone says how wonderful WPA2 is, the reality is that any security, even WEP will very effectively discourage and effectively prevent others from using your wireless network.
    Good luck.

  • Entry of time sheets by many personnel numbers at the same time

    Hi
    I have a requirement from the client where time sheets to be entered by a group of employees at the same time.
    2.  The employee should enter the time sheet from any place out of office may be internet outside ie web enabled time sheet.
    Please suggest me how to perform the above two things in the CATS.
    waiting for your suggestions.
    Thanks
    Harish

    One of them.
    What about the statement in the docs isn't clear?
    atomic_refresh
    If this parameter is set to true, then the list of materialized views is refreshed in a single transaction. All of the refreshed materialized views are updated to a single point in time. If the refresh fails for any of the materialized views, none of the materialized views are updated.
    If this parameter is set to false, then each of the materialized views is refreshed in a separate transaction.Each one becomes a separate transaction. Some may run in parallel, some serially, you have no control. So it may well be one at a time. The bigger issue, if they are separate transactions, is that if someone queries one the corresponding data may not exist in the others. Is this what you want?

  • How to call more then one Function modules at the same time

    HI ,
    How to call more then one FM at the same time .
    Modertor Message: Interview-type Questions are not allowed.
    Edited by: kishan P on Jan 2, 2012 2:22 PM

    They are a few different models of the MacBook Pro ranging from 15.4" i7's to 17" i7's. I would use the same models together though when imaging them just like I do with PC's. For example I would Ghost 5 Lenovo T420 Thinkpads at the same time which all share the same exact specs and config. Looking to do the same with the MBP. I have .dmg image of OSX 10.8.1 on a firewire drive which I'm using. I image all my MBP's with this drive, the only downside is I have to do each MBP one at a time.
    Thanks

  • Upgrading Logic and Mac at the same time?

    Hey, I need a bit of help. I am curenttly running Logic 7 on a 2.0 dual core powermac G5. When Apple release the penryn chips I will sell my G5 and get a new mac book pro. I want to upgrade to Logic 8 (the UK upgrade price is about £130). However would I need to install logic 7 on the new mac to be able to use the upgrade? Sorry if this sounds stupid! I don't really wanna be installing old software on my new mac. Could someone explain how this would work. I would prefer to keep everything new and simple, for some reason I have an image of installing 7 and then upgrading to 8 is gonna eat all my memory and hardrive space and muck up the new machine?! Kinda wanted to start afresh with new computer, new software etc. There is nothing I need to bring over from my copy of Logic, no tracks or plug-in's or anything. Also another factor is I think I have 7 or 7.1, not sure that will even run on the new intels will it? If I remember I think 7.2 was the intel upgrade. If I had the money I would just buy it from scratch but I don't have the money and spent about £600 on it originally so would prefer to keep costs down!
    Cheers

    No, just install Logic 8 and have your XSkey handy.
    Logic 7 installation is not required (or even advisable.)

  • Starting multiple queries in different modules at the same time

    Hi @ all,
    i´ve built a forms mdi application with forms 10g (10.1.2.3).
    When I open a form (from the menu form) and start a database query the whole mdi application is blocked until the query finishes.
    Is there a way to avoid blocking the whole application so that i am able to start another form and do some work while the other running module is still querying (Maybe starting each module in its own (java) thread).
    Thank you,
    Thomas

    Non-blocking cannot be set programatically. Plus, it only gives you the option to cancel the query, not open another form. From the Help:
    Interaction Mode property
    Specifies the interaction mode for the form module. Interaction mode dictates how a user can interact with a form during a query. If Interaction Mode is set to Blocking, then users are prevented from resizing or otherwise interacting with the form until the records for a query are fetched from the database. If set to Non-Blocking, then end users can interact with the form while records are being fetched.
    Non-blocking interaction mode is useful if you expect the query will be time-consuming and you want the user to be able to interrupt or cancel the query. In this mode, the Forms runtime will display a dialog that allows the user to cancel the query.
    You cannot set the interaction mode programmatically, however, you can obtain the interaction mode programmatically using the GET_FORM_PROPERTY built-in.

  • Windows 7 desktop install - how many portal users at the same time?

    If I install spice works on a windows 7 desktop machine that is part of a network,  is there a limit to the number of machines that can simultaneously access the user portal and create a ticket ?
    thanks
    Dan
    This topic first appeared in the Spiceworks Community

    Please take a look at:
    https://wiki.mozilla.org/Enterprise
    The resources section at the bottom may have information you are interested in.

  • How to create many clip region in the same time?

    I want to create JIGSAW game?
    There are 9 clip in display.
    When player press any number, that number will appear.

    A very short look in the MIDP API docs (Graphics.class) and there would be the solution:
    "There is a single clip per Graphics object. The only pixels modified by graphics operations are those that lie within the clip. Pixels outside the clip are not modified by any graphics operations. "

  • Dbua upgrading multiple db at the same time

    hi
    in rac environment is it possible to run multiple dbua to upgrade 2 db's at the same time ? they both share the same rac db home.. i dnt think if its possible to run both from nodea but what if i run one from nodea and one from nodeb? will that work ?

    in rac environment is it possible to run multiple dbua to upgrade 2 db's at the same time ?Yes you can execute two binaries at the same time.
    they both share the same rac db home.. DBUA will upgrade database not ORACLE_HOME so if you are going to upgrade you will stop the database.
    i dnt think if its possible to run both from nodea but what if i run one from nodea and one from nodeb?It will happen because before upgrading you need to shutdown, so it is possible
    will that work ?Yes but very careful .. :)

  • Many videos zooming in slowly at the same time

    Hi, Just learning FCE and saw a video that displayed many different videos at the same time zooming out slowly and then zooming in slowly. Can this be done with Final Cut Express and how can it be done? Thanks.

    Welcome to the Forum!
    Set the Canvas window to Image+Wireframe mode. Layer the clips, each on it's own video track so they're stacked one above the other. Double-click the upper most clip to load it into the Viewer window. Click on the Motion tab and use the Scale and Center controls to resize and position the clip where needed ... or do it in the Canvas window with the Wireframe. Once you have it where you want it, move the playhead wherever you want the zoom to start and set a beginning keyframe for each parameter (Scale, Center, Roation, etc).
    Next move the playhead to where you want the zoom to end. Resize and reposition the clip as needed to complete the zoom. A new keyframe will be added automatically.
    Repeat for each clip.
    -DH

  • Can i use a bluetooth headphone and a bluetooth cycle computer at the same time on a 4s?

    I was wanting to get the wahoo bluetooth enabled cycle computer and heart rate monitor and use it at the same time as I use bluebird bluebuds bluetooth head phones. Does this many divices work at the same time?

    No, you can connect only one bluetooth device at a time.

Maybe you are looking for