Upgrade mountain lion to mac pro 2007

Have older Mac Pro, early 2007. Can I uprade to Mountain LIon . The online requirement says 2008 or later

If you are willing to endure the crushing complexity of it, there is a Hackintosh solution that allows the loading of EFI-64 work-alike software in RAM (rather than in firmware). This would allow the loading and running of 10.8 on your "too-old" Mac if this is exceptionally important to you.
• This solution may require additional RAM, which is quite expensive for these older Macs.
• If you have serious problems, there is no support available for such a set-up.

Similar Messages

Upgrade to mountain lion on mac pro

I have a Mac Pro, serial number CK******XZS. When I try to find out the production date on
https://selfsolve.apple.com/agreementWarrantyDynamic.do
I am only told that it is a Mac Pro, but no manufacturing date.
When I try to install Mountain Lion, I am told the the computer is not compatible
with Mountain Lion.
Can anybody tell me the reason? And are there any chances I will be able to upgrade later?
<Edited By Host>

never post serial number. allyou need is system profile and where it says "MacProX,1"
1=2006, 5=2010 and only 3,1 (2008) have 64-bit kernel support / 64-bit EFI needed to support ML on Mac Pro.

Unable to install Mountain Lion on Mac Pro 4,1

I originally wanted to do a Clean Install on my Mac Pro 4,1 (Early 2009 - Single Quad).
1ST BRICK WALL: After running Install OS X Mountain Lion.app in Lion, it reboots to a Grey Screen/Prohibitory (Circle Cross Line) Screen. Resetting PRAM did not resolve issue.
Ok, how about a USB Thumb Dive Install...
2ND BRICK WALL: After booting off a Mountain Lion Install USB drive, none of my internal hard drives show up in the "Select Destination Drive" (i.e. no drives mounted).
I tried both methods with 2 different hard drives (1 Solid State Crucial M4 and 1 Stock Platter Drive)
Anyone else have similar problems? Any suggestions?
P.S. I have a "Apple Store" ATI Radeon HD 5870 installed.

@Pete_B100, thank you for a different direction. I was able to start an install with the drive in an external USB bay. However, I could not get it to boot ML inside the internal bays. This got me thinking...
SOLUTION: This was an error on my part. I bought my MacPro 4,1 without the WiFi card in it. Around the time I bought it, I had a Mac Mini that I was using for parts. I took the WiFi card (Model No. AR5BXB6) out of the Mac Mini and put it in the Mac Pro. Worked like a champ for SL and Lion. While I was in there yanking out drives, I decided to yank that out. The hint was that the ML USB boot could not see my WiFi card. After I took it out, it was operating like it should. I was able to do a Clean Install of Mountain Lion on my Crucial M4 SSD with no problems.
Thank you all for your help and suggestions!

Cannot install Mountain Lion on Mac Pro 4,1 (2009) - can anyone help?

Hi All,
I have a 2009 Mac Pro - purchased 2nd hand in January. I am trying to install Mountain Lion and had the same issues as other Mac Pro 4,1 owners have had.
I've tried installing from the installer exactly as downloaded from the App Store - this results in a grey screen, and I have to re-install Snow Leopard to get the machine running again.
I've tried creating a bootable USB stick. This boots into the installer, but then I get the message "Mac OS X could not be installed. Try reinstalling." which is the most ridiculous error message I've ever read.
I've unplugged all peripherals except keyboard/mouse and one monitor. I've removed all extra drives from inside, except for the system drive. I've removed the wireless card. And I still can't install Mountain Lion. If it had cost more than £14 I've be rather upset at the moment.
Does anyone have any sage advice that will get me running ML?
I do have a full error log I'm happy to share, if that will help.
Thanks in advance!

Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/

Mountain lion on Mac Pro...after boot camp can't get back into OS x!!!!

Hey all,
Not sure what is going on?!?!? I sucessfully set up windows on bay 3 of my mac pro following the Apple documentaion....success! However, when I go and try to boot back into OS X, I can't. All I get is the chime, then a white screen and pause. If I let go of any of the key combos (see below), it boots right back into windows.
List of things I can't do on boot are :
- hold shift and go into safe mode
- hold Command + R and go into recovery mode
- hold alt and look for boot drived
The only thing that I have succesfully done is gone into target disk mode and checked the drives on my macbook pro. They seem fine in disk utility.
Please help! I don't want to be doomed to life with only windows 7 on my mac pro.
Much thanks
D

As an ammendment, on my macbook pro, I have succesfully mounted my MAC PRO boot drive (mac pro is in target disk mode). Everything looks fine. So summary is...
-Can't use any of the options to force a log in to my mac pro.
-I can mount my mac pro boot drive to my macbook pro and boot it there
-allways defaults to windows.
Any knowledge (even obvious) is much appreciated.

Since upgrade to lion on Mac pro the atv2 connection is extremely slow

I upgraded my macro to lion and since then it takes 3 min to pull up the library and times out when trying to down load the show. It worked fine under snow leopard. I have removed and redone the home sharing on both ATV2 and macro still have the same issues.

DSKELLY wrote:
My system operates flawlessly...
Which raises the question of why would you want to upgrade? Lion is largely cosmetic, and a lot of those cosmetic differences are not pretty
- removal of coloured icons in finder sidebar, making navigation more difficult
- no scroll bar arrows making navigation more difficult (essential if you need fine control of scrollling to move around in design progs like Illustrator/ Quark),
- autosave and versions, making everything more difficult through hideous beach balling on large photoimage files in preview or keynote if you make multiple and rapid minor changes
- dodgy compatibility with some versions of photoshop
- less control over where to keep your folder (apps have to be assiged to the app folder)
- less control over what information remains on your hard disk hidden from you (including versions of your personal files).
- if you use magic trackpad on your MP, you also loose the 4-finger swipe 'app switcher' gesture
On top of all these 'features' you get given:
- mission control, which is less configurable than spaces
- launchpad, which is effectively the same as having 'stacks' and 'grid' options set on your app folder in the dock, only lunchpad takes over your whole screen and is harder to navigate.
Now, that's all IMHO opinion, of course. As someone further up in this thread advised, whatever you do use Carbon Copy Cloner or SuperDuper to clone your current installation. If all is to your liking, you can always use that disk as a regular backup drive. If all is not, the way back to your flawless system is just a five-minute reboot away.

HT201342 How will this benefit me. I have a Mac computer that i upgraded to Mountain lion, a macbook pro and an iPhone 4s which has the latest software. all i want is simplicity and to have one email account which which will not duplicate everything 4 or

I have been asked to set up an Icloud account by Apple.
How will having another icloud email benefit me. I have my work email which is all i require, but had to set up a @me account to get email on my Macbook.
I have a Mac computer that i upgraded to Mountain lion, a macbook pro and an iPhone 4s which has the latest software. all i want is simplicity and to have one email account which which will not duplicate everything 4 or 5 times.
My notes are duplicated, i have to delete my emails individually on all devices so whenever i put my phone on, all the emails i have deleted at work re-appear on my phone and again the same thing happens on my Macbook pro. I seem to spend all my time deleting emails 3 times.
Is there something simple in the set up of these that i am missing?
Any help would be appreciated

I have been asked to set up an Icloud account by Apple.
How will having another icloud email benefit me. I have my work email which is all i require, but had to set up a @me account to get email on my Macbook.
I have a Mac computer that i upgraded to Mountain lion, a macbook pro and an iPhone 4s which has the latest software. all i want is simplicity and to have one email account which which will not duplicate everything 4 or 5 times.
My notes are duplicated, i have to delete my emails individually on all devices so whenever i put my phone on, all the emails i have deleted at work re-appear on my phone and again the same thing happens on my Macbook pro. I seem to spend all my time deleting emails 3 times.
Is there something simple in the set up of these that i am missing?
Any help would be appreciated

After upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load sec to open, never took that long.

after upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load

Apple made some changes to increase security that slowed the boot time.
Startup - Slow Boot
Startup - Slow Boot (2)
Startup - Slow Boot (3)

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

HT3728 After upgrading to mountain lion, my Mac no longer sees the Time Capsule. What am I doing wrong?

After I upgraded to Mountain Lion, my Mac cannot access the data disk on the Time Capsule. Who else is having this problem and have you been able to solve it?

Bonjour PanicRev16
   I use Grapher 2D 3D on my early 2006 iMac, but I tried it on my wife's Macbook Pro with Lion then Mountain Lion : no problem with Grapher 2.1 3D gcx files, Grapher 2.3 loves them !
   You can try the 3D Grapher 2.1 files from the website http://y.barois.free.fr/grapher/ and see the result on your Mac Mountain Lion.
   I updated Grapher documentation and bugs of this website on 15th december 2012 (Lion, then Mountain Lion).
Au revoir,
YB24

I have a mac pro 2007 model. It appears I have a corrupted sector on my the hadrive tha has my operating system. If I use the install disk that came with is (Tiger) can I still get my lion back.

I have mac pro 2007 model given to me, I updated it to lion about six months ago, and I do not have a time machine.
Lion stopped loading before I get to the login screen,
I tried all the tips, doing a option/shift/v. I noticed several fsk_dsk errors that it could not fix on my boot drive.
Restore would not work either. The only physical copy I have is the install disk that came with the mac. I think it is Tiger.
If I put this operating system on will I be abel to upgrade it to lion, and if so will I have to pay again?

The Lion Recovery Partition has its own index. Your Macintosh HD partition is the one with the troubles.
If Disk Utility cannot fix it, you may need to apply different Utilities, such as Disk Warrior.
Some readers suggest that the best disk repair is to erase the drive and restore it from your Backups.
This might be a good time to consider getting a new drive to have on hand. This would allow you flexibility in copying, fixing, and (if needed) replacing the drive with the problems.

Mac Pro 2007 can't upgrade to Yosemite

Hi
I am unable to upgrade to Yosemite. Is it possible or do I have to give away my Mac Pro 2007 and get a new one?
Please advice.
Thanks!

Start here:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
After download and before running do some housekeeping:
Make a Lion installer (this is for flash but I used a small partition on another disk drive to be faster)
http://liondiskmaker.com/
I recommend installing on another drive, formatted with Lion Installer.
Now would be an excellent time for an SSD. Other than using a 2.5" adapter don't feel there is anything special EXCEPT to install TRIM Enabler.
http://www.amazon.com/Icy-Dock-EZConvert-2-5-Inch-Converter/dp/B002Z2QDNE/
http://www.amazon.com/Samsung-2-5-Inch-Internal-MZ-75E250B-AM/dp/B00OAJ412U/
The SSD was the biggest improvement in 8 yrs. The XP941 would be faster and leave you with 4 drive bays.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820147366
Is the only PCI device that boots all Mac Pro models, does not use a 'controller' only an adapter to use M.2 style in PCIe (and unique to Mac Pro that it will boot while PCs X99 still have new BIOS our 8+ year old EFI works, something that cannot be said for Sonnet Tempo Pro SSD card and others).
Just a hint and push into the world of SSD
http://www.informationweek.com/how-to-upgrade-os-x-snow-leopard-to-os-x-lion/d/d -id/1099195

After upgrading to mountain lion my mac is very slow?

Hello
After upgrading to mountain lion my mac is very slow
It was starting in 10 seconds and shuting dow in 5 seconds and now it's taking more than one minute to start it or shut down it and everything is slow
why????????/
Thanks

First, back up all data immediately, as your boot drive might be failing.
Take these steps when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.

I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.

jimr.l wrote:
I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.
If you bought the MBP new 3 weeks ago, it should have come with Mountain Lion already installed. Did you update your MBP to the newly released 10.8.4 update? If not, what OS were you running before the upgrade, and what version of Mountain Lion do you have now?

I have mac osx 10.6.8 but i cannot update but win i upgriding osx mountain lion tha mac tell me (cheke network ???) I HAVE mac book pro 2011

I have mac osx 10.6.8 but i cannot update but win i upgriding osx mountain lion tha mac tell me (cheke network ???) I HAVE mac book pro 2011

Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

Upgrade mountain lion to mac pro 2007

Similar Messages

Maybe you are looking for