Upgrade Muvo Tx to Muvo TX FM

Can i Use Muvo TX FM firmware on Muvo TX....so i can use Fm radio...because the hardware is the same...

tomtofriend wrote:
If you can
Are you really that bored that you have to go round posting meaningless replies in here?Hasn't Cat-CL already warned you about re-opening ages old threads?PB

Similar Messages

Upgrade MuVo TXFM to 1.22.03 the capacity changed from 241M to 235M. W

I've encounter the same problem when upgrade my MuVo TX FM to Firmware .22.03, when I play songs, sometimes, the playback stops, the time counter still change, but there is no sound.
Moreover, the capacity of my MuVo TX FM changed from 24M to 235M, Has anybody else have the same issue?
Can anyone give me some suggestion? I've formatted the player 5 times today. Must I Downgrade to the lower version of firmware?
I noticed that someone require the .9.0 FW, here is the official download link for it.
http://files.creative.com/manualdn/D...FW_LF__9_0.exe
Excuse for my poor English.
Thanks for everyone's help in advance.Message Edited by chaoxia on 07-05-2006 06:54 PM

I re-format the mp3 player with the windows explorer. using fat.
and the playback problem seems disappeared.
Maybe you can have a try.

Upgraded muvo tx...new PROBL

I posted earlier how i couldn't turn on my player. Well, creative support suggested that I upgrade my firmware which I just did. THough i can turn it on and stuff now, the new problem is that the volume levels are all messed up. For example, level volume is about level 8 level volume before the upgrade. Has anyone had this problem, and if so, how did you fix it's
thanks

You can only fix it by going back to a previous firmware version - Creative have changed the volume scales from 0-40 to 0-25 by chopping off the bottom 5 levels.
PB

Creative MuVo TX FM Firmware Upgrade 1.18.02 - The End For Many Players - Par

This is part 2 of the story since you cannot post such a long message in one posting.
>>Dear >>>>in my first mail I wrote already:>>>>After installing the recovery driver I run the >>firmware update again. It says that it found a >>device in recovery mode and more (pretty quick >>message) and after this it searches for this >>device - and does not find any device connected >>to an USB port.>>>> From this statement you can see that I installed the recovery drivers
>>and put the player in recovery mode. Then the player is seen by your >>update software since it finds the player in recovery mode. But after >>this it cannot transfer the new firmware because suddenly it does not >>see the player anymore on an USB port...>>>>To be honest - if your support team would read the mails a bit more >>carefully we all could save a lot of time... And of course I did >exactly>>as described by you and in the update notes. And this all on two >>different computers with two different OS - XP and Win98 as I said in >my>>first mail already...>>>>Best Regards,>>>>Peter>>>>>>>>At 02:6 .0.05 +000, you wrote:>>>Dear xxxxxx>>>>>>Thank you for replying to us.>>>>>>In response to your email, kindly ensure that your player is used on >>the>>>minimum operating system requirement. When connecting your player >>>directly to the computer, was your player being recognized? I have >>>verified the firmware update.>>>>>>Kindly verify the below steps you have used to update the firmware for>>>>>your player: >>>. Download the MuVoTXFM_PCFW__8_02.exe file into your local hard >>>disk.>>>2. Connect your player to your computer.>>>3. Double-click the firmware upgrade file.>>>4. When prompted to set your player in Recovery mode, disconnect your
>>>player from your computer. Press and hold the Play button while >>>connecting your player to your computer's USB port. Continue to hold >>the>>>Play button for about 0 seconds after connecting your player to your
>>>computer. Release the Play button when the Find New Hardware dialog >box>>>>>>>appears on the computer screen. Did you encounter any issue?>>>5. Follow the instructions on the screen to install recovery drivers >>for>>>your player.>>>6. Double-click the firmware upgrade file and follow the instructions
>>on>>>the screen.>>>>>>Are you still encountering the same issue?>>>>>>Do email back on the status concerning the issue so that I can assist
>>>you further. Thank you. >>>>>>Best Regards>>>>>><name removed>>>>Technical Support>>>Creative Labs Asia>>>>>>To provide feedback on your "Creative Experience" please click on the
>>>following link:>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>========== >>>DISCLAIMER >>>========== >>>This email and any attachments may contain private, confidential and >>>privileged materials for the sole use of Creative's intended recipient>>>>>and is not to be forwarded or copied to others. Any review, copying >or>>>>>>>distribution of this email or any attachments by others is strictly >>>prohibited. If you are not Creative's intended recipient, please >>inform>>>Creative immediately by responding to this email and thereafter >>>permanently delete the original and any copies of this email together
>>>with any attachments. Thank you>>>>>>Original Message Follows:>>>------------------------>>>Thanks for your response. I am a bit confused since I answered many of>>>>>your questions in my last mail already. And I have been working with
>>>computers for more than 30 years and did many upgrades with THIS >player>>>>>>>already. Since other users have exactly the same problem - if you >check>>>>>>>the forum - it must be a problem with the player or your upgrade >>>software. Should I send the player to your company for repair? But in
>>>any case - you should warn the customers using this upgrade or take it>>>>>from your webpage. If you read my old mail - I tried the whole upgrade>>>>>on 2 different OS and 2 different Computers with your latest drivers.>>>>>>Best Regards,>>>>>>Peter>>>>>>>>>At 07:38 0.0.05 +000, you wrote:>>>>Dear xxxxxx>>>>>>>>Thank you for reaching us at Creative Technical Support; we >appreciate>>>>>>>>the opportunity to assist you.>>>>>>>>Based on the information you provided, may I know if are you using >the>>>>>>>>player on Windows XP>>>> or Windows 98? I would like to inform you that the player only >>support>>>>>>>>>>the below operating system:>>>>>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>>>>>You might like to consider the below factors when connecting your >>>player>>>>to the computer's USB port:>>>>>>>>. Make sure you have the latest drivers, especially USB, installed >>for>>>>your motherboard. If you're not sure, check with your motherboard >>>>manufacturer.>>>>>>>>2. Make sure your motherboard has USB v. ports, supplying at least
>>>>500mA to the USB ports. If you're not sure, check with your >>motherboard>>>>>>>>>>manufacturer.>>>>>>>>3. Try unplugging all other USB devices from the system.>>>>>>>>4. If you're using a hub, try connecting the product directly to the
>>>>onboard USB and vice versa.>>>>>>>>5. You might wish to verify the functionality of your product on >>>another>>>>computer.>>>>>>>>Do let me know the result.>>>>>>>>In case if you need any clarification, please do not hesitate to >>>contact>>>>us. Thank you.>>>>>>>>Best Regards>>>>>>>><name removed>>>>>Technical Support>>>>Creative Labs Asia>>>>>>>>To provide feedback on your "Creative Experience" please click on the>>>>>>following link:>>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>>>========== >>>>DISCLAIMER >>>>========== >>>>This email and any attachments may contain private, confidential and
>>>>privileged materials for the sole use of Creative's intended >recipient>>>>>>>>and is not to be forwarded or copied to others. Any review, copying
>>or>>>>>>>>>>distribution of this email or any attachments by others is strictly >>>>prohibited. If you are not Creative's intended recipient, please >>>inform>>>>Creative immediately by responding to this email and thereafter >>>>permanently delete the original and any copies of this email together>>>>>>with any attachments. Thank you>>>>>>>>Original Message Follows:>>>>------------------------>>>>=======================>>>>>>>>Subject: CLA (CTL) - Technical Support Request - (MuVo TX FM)>>>>Name: xxxxxx>>>>E-mail Address: [email][email protected]][email protected][/url]>>>>Country: Thailand>>>>Self Description: Advanced PC User>>>>------------------>>>>Support Inquiry: ID(3) My Creative hardware stopped functioning >>>>correctly >>>>Product: MuVo TX FM>>>>Serial Number: C6PF32477002804Z>>>>Date Of Purchase: /2/2005>>>>>>>>------------------>>>>Operating System: Windows XP>>>>Creative Model Number: MUVO TXFM 52 MB>>>>Computer Brand/Model: >>>>Processor/CPU: >>>>Memory: >>>>BIOS Type/Revision: >>>>System Board/Chipset: >>>>------------------>>>>>>>>Detailed Problem Description:>>>>I tried to update to the latest firmware >>>>MuVoTXFM_PCFW__8_02 since I stay in Thailand >>>>and need the Thai letters. I installed the >>>>recovery driver since the upgrade software >>>>required this and did exactly what is described. >>>>After installing the recovery driver I run the >>>>firmware update again. It says that it found a >>>>device in recovery mode and more (pretty quick >>>>message) and after this it searches for this >>>>device - and does not find any device connected >>>>to an USB port.>>>>>>>>I have tried this many times and even with the OS->>>>Win98. The upgrade software detects the device in >>>>recovery mode but after this nothing more >>>>happens - it does not find it on an USB-Port >>>>anymore. >>>>>>>>=======================
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:4 PM

This is part of the message since you cannot post such a long message in posting.
This should show how lost you might be with your warranty. If you install the Firmware Upgrade .8.02 your player might be useless. There is no way to make it work again. Not really. If you understand what Creative seems not to do. So dear user - buy a new player. If you want to know what the solution is to make your player work again post here. If there are enough postings I will explain it here. Too sad that Creative does not do it. It is their job not mine... But again - I am not talking about a problem what is nice to have it solved. I am talking about a player that does not work anymore. If you do not want to wait for my solution just send your player for repair - it was not your fault that it does not work anymore...
This story with the great support was a test of Creative and will be used in a review. So be not surprised to find it somewhere else.
Here the Creative support story. The first mail is at the bottom. I had to make part and part 2 since you cannot post such a long message here.
To: Creative Labs Asia Customer Support <[email][email protected]][email protected][/url]>Subject: Re: CLA (CTL) - Technical Support Request - (MuVo TX FM) (KMM7755874I6636L0KM)Dear,I know the solution long time already. I just wanted to test the support at Creative. The problem is real and forces owners of your players to buy a new one since their playes get useless after the upgrade. Not only that Creative puts a faulty upgrade on their homepage - their support is good for nothing. But this was a test of the Creative support. I hardly can believe that Creative is not in the position to solve a very simple problem caused by Creative - what has severe consequences for their customers. But this mail story confirms exactly this. So my advice to any customers - stay away from this company and their products - what is the final result of my test. If you want to know the solution for the problem please contact me again - I am glad to help such a poor company :-)))) For free? I am not so sure...since my player was not for free too...Best Regards,PeterPS: The product is still within the "police period" of my dealer. And I did not just buy the product. If you ever read what your system tells you (what I had to enter) - it was long time ago.
At 03:48 3.0.05 +000, you wroteear PeterBased on the information you provided, since you have just bought the product locally, you may like to contact and check with the dealer firstfor their purchase policy period and see if the product is still within their policy period. If they are unable to assist you, do contact us so that we can assist you promptly in your issue. Thank you. Best Regards<name removed>Technical SupportCreative Labs AsiaTo provide feedback on your "Creative Experience" please click on the following link:http://www.**bleep**.com/support/con...asp?r=CLA&d=TS========== DISCLAIMER ========== This email and any attachments may contain private, confidential and privileged materials for the sole use of Creative's intended recipient and is not to be forwarded or copied to others. Any review, copying or distribution of this email or any attachments by others is strictly prohibited. If you are not Creative's intended recipient, please informCreative immediately by responding to this email and thereafter permanently delete the original and any copies of this email together with any attachments. Thank youOriginal Message Follows:------------------------Dear .,I am a bit confused. What does my problem have to do with buying it on an oversea/business trip? This you really have to clarify. And why do you need my contact number/residential address if you have my contact email address already? You want to come to me and bring me a new player?Would be fine :-) But since there are many others with the same problem there must be a better solution.But in any case - I bought it were I li've and not on a business trip - the dealer is just around the corner - but I guess with more than 30 years almost daily IT experience I have a bit more knowledge than him. Igave you the serial number and the date of purchase. I bought it in Thailand where I li've now. Best Regards,PeterAt 09:28 2.0.05 +000, you wrote:>Dear Peter>>Regards to your issue, may I know is the unit purchase locally or during>Oversea/Business trip? If the unit is purchased during oversea/business
>trip, kindly provide me with the information of the place of purchase, >your current location (residential address) and contact number so that I>will be able to provide you with the advice required promptly.>>Do email back on the status concerning the issue so that I can assist >you further. Thank you. >>Best Regards>><name removed>>Technical Support>Creative Labs Asia>>To provide feedback on your "Creative Experience" please click on the >following link:>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>========== >DISCLAIMER >========== >This email and any attachments may contain private, confidential and >privileged materials for the sole use of Creative's intended recipient >and is not to be forwarded or copied to others. Any review, copying or
>distribution of this email or any attachments by others is strictly >prohibited. If you are not Creative's intended recipient, please inform>Creative immediately by responding to this email and thereafter >permanently delete the original and any copies of this email together >with any attachments. Thank you>>Original Message Follows:>------------------------>Dear ,>>I was talking about Win98SE. I guess there is are not many people using
>Win98 anymore.>>The problem is that the player is in recovery mode already. When I plug
>it into the USB port it does not show up as a dri've anymore. But the OS>confirms that I have put in a device into the USB port when I plug it in>pressing the play button. Also when I run the upgrade software it says >that it has found a device in recovery mode but then it does not find it>anymore. But again - neither WinXP nor Win98SE allow me to format the >dri've since it does not show up as dri've at all.>>Sorry for all this. But realize that I and many others have a piece of >scrap as long as we cannot find a solution for this problem. In the >forum people write that they even bought a new player already since this>firmware upgrade made an end to their TX FM.>>Best Regards,>>Peter>>At 03:0 2.0.05 +000, you wrote:>>Dear Peter>>>>Based on the information you provided that you have verified the player>>>>on another computer with Windows 98. I would like to inform you that >the>>player and the updated firmware only support the below operating >system:>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>I understand that you are also using the player on a Windows XP >>computer. However, you might like to verify your player on another >>computer that meets the above mentioned minimum operating system. Do >let>>me know the result. >>>>If issue persists but when connecting your player directly to the >>computer the player is being recognized, format the player using the >FAT>>file system, and download and install the latest >>driver/firmware/application update available through the below link: >>>>(Note: All contents in the player will be removed when you format your
>>player, please backup the files) >>>>http://www.asia.creative.com/support/downloads/ >>>>. Insert your MuVo TX FM player into the USB port on your PC/Laptop, >>try a different USB port or hub if it is not detected. >>2. Open Windows Explorer. The player will be recognized as a Removable
>>Disk. >>3. Right-click on the player and choose Format. >>4. In the File system drop down menu, select FAT, and then click the >>Start button. Do not select FAT 32, though it is selected as default by>>>>Windows XP. >>>>After the formatting is complete, make sure that you stop your player >>before disconnecting it from your computer. (Please take note that stop>>>>your player before disconnecting it from your computer is a must. >>Otherwise it will cause damage to your player's memory >storage/Harddisk)>>>>>>To stop your player in Windows XP, Windows 2000 or Windows ME Click on
>>the Safely Remove Hardware icon on the Taskbar, click Safely remove USB>>>>mass Storage device, and disconnect your play when you are prompted to
>>do so. >>>>Make sure that the icon below appears on the LCD screen again for at >>least fi've seconds before disconnecting your player.>>>>Do let me know the result. >>>>In case if you need any clarification, please do not hesitate to >contact>>us. Thank you.>>>>Best Regards>>>><name removed>>>Technical Support>>Creative Labs Asia>>>>To provide feedback on your "Creative Experience" please click on the >>following link:>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>========== >>DISCLAIMER >>========== >>This email and any attachments may contain private, confidential and >>privileged materials for the sole use of Creative's intended recipient
>>and is not to be forwarded or copied to others. Any review, copying or>>>>distribution of this email or any attachments by others is strictly >>prohibited. If you are not Creative's intended recipient, please >inform>>Creative immediately by responding to this email and thereafter >>permanently delete the original and any copies of this email together >>with any attachments. Thank you>>>>Original Message Follows:>>------------------------
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:43 PM

Using folders/subfolders with 1.17.04 firmware upgrade on MuVo TX

I just upgraded my firmware to version .7.04. Under the Added Features or Enhancements it states 'Supports up to three subfolder levels in the root directory.' I cannot get my player to recognize the subfolder levels.
I would like to organize my music files on my player in the following format: Genre/Artist/Album. For example, I would create a 'Rock' folder in the root directory. In that folder I would create a subfolder named 'Aerosmith'. In that subfolder I would create two subfolders named 'Greatest Hits' and 'Greatest Hits 2'. Each of those subfolders would contain the actual music (.mp3 or .wma) files.
I've tried doing that with Creative MediaSource Organizer, but when I play the music on my MuVo TX FM it only shows folders for each Album. Each Album folder contains the music files.
All of the play options appear to work correctly for the Album subfolders, such as shuffle all and shuffle folder. However, I would also like to be able to have these options for each of the folders and subfolders. For example, I would like to be able to shuffle play all music files in the Rock folder or in the Aerosmith subfolder, in addition to the normal play options.
Has anyone else run into this issue?
Any instructions/assistance would be greatly appreciated. Thank you in advance.

The player only shows folders that have actual music files in them so what you see is correct.
The 3 levels of sub-folders are to allow you to organize your files on the player and to sync with WMP 0 which uses a Music/Artist/Album structure.
To play all of the Rock genre you would have to put all of the files beneath this folder directly into it, not in sub-folders.
PB

Muvo TX FM 512MB: firmware upgrade failed. How to recov

Hi, I have a Muvo TX FM 52MB. The firmware version used to be .4.0x. I tried to upgrade it to the newest one, .7.04.
I did everything according to the Instructions on the Creative Download Website. I let the OS to choose the recovery driver for me. The firmware upgrade file correctedly found my player and executed the upgrade. However, there's no instruction that I should check the format data option during upgrade. So I didn't format the data during upgrade. After the upgrade, I couldn't start the player and the PC couldn't recognize it.
I tried to do the upgrade again. The PC correctly recognized the player as a recovery device. After I started the creative upgrade program, the program founds the recovery device, then started to find any device connected to the computer, finally said that "The device is not connected to the USB port".
How to solve it's Many thanks.
Alex

go to nomadworld.com and find the firmware... READ PROPERLY... it says that u must install a new driver before u upgrade the firmware... mine works... for now, to recover it, press and hold the play button on the player while connecting it and hold the button until a window appears to install the player recovery software... before that, install the new driver first. then let windows search for the driver. windows will clear everything up in ur player. NOW U CAN DO UR firmware update... it doesnt matter whether u want to format or not cause the firmware upgrade program will format your player even though u didnt want to do it. its not the formatting problem.. hope this hel
ps.
thanks for reading.

MUVO TX FM Firmware upgrade prob

I've downloaded MuVoTXFM_PCFW__24_02e_a file and began upgrading my player, when suddenly got an error, now I can't do anything with my MuVo - my PC doesn't see it, it doesn't turn on and I can't upgrade it.
Is there anything I can do with my player, exept for throwing it away?
How can I fix the problem?

I've downloaded MuVoTXFM_PCFW__24_02e_a file and began upgrading my player, when suddenly got an error, now I can't do anything with my MuVo - my PC doesn't see it, it doesn't turn on and I can't upgrade it.
Is there anything I can do with my player, exept for throwing it away?
How can I fix the problem?

Nomad Muvo TX 128 MB Firmware upgrade trou

Ok, for I can see the last version of the firmware for this player is the .4.02
Here's the link:
http://cl.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=&Product_Na me=MuVo+TX&Product_ID=9672&modelnumber=&driverlang =034&OS=0&drivertype=0&Image4.x=29&Image4.y=8
I have tried to update the firmware with no succes, but I succesfully updated the firmware to an older version .0.05
Well my problem is that with the older version I just clicked twice and the upgrade started, but with version .4.02 I had to enter in the player recovery mode but I can't...
So, what can I do to update the player to the last firmware version?

Ok, after some troubles I could get the device updated... But now I only see 8 MB of the 24 I used to see on it...
How can I recover the lost space? Because 6 MB's it's a big amount of space unused...

Problem with Muvo FM TX after upgrading firmware to 1.19

My GB Muvo FM TX had been working fine, but I saw the new firmware and decided to give it a try anyway. I upgraded to .9.0. Now the player plays only first 5 minute or so of each MP3 file. After about 5 minutes, it stops playing and skip to next file. Again it will only play the first 5 minutes before skipping to next file.
Could anyone give me some help?
Thank you.
yue

Well, I solved the problem. I downgraded firmware to .8 and then upgraded to .9.0 and the problem is gone. Also, this time I did not put the player into recovery mode.
Yue

New Muvo N200 - Should I upgrade firmwar

Just got a new Gb Muvo N200 and looking at the settings it is version ..0
Should I upgrade the firmware as I believe there is a newer version.
I havent experienced any pops or crackles yet but it is new and I havent listened to more than 5 minutes

BognorRocks,
The new firmware listed some fixs and added support for Audible audio. If your not having problem with the player and audible audio support is not needed at your end then it's not needed.
Jason

SUCCESS !!! Muvo TX 512MB Firmware Upgrade

My Muvo was toast. Same issues as others here. "No Music" message when Windows Explorer clearly showed mp3 files plus data files. I was even able to copy (backup) files to my laptop. I highly recommend this before you start anything!
After that, though, deleting files caused all sorts of problems. Most notably was the hanging or freezing every time windows explorer/windows format/(even)IE creative.com site autoupgrade tried to access the player. I formatted the dri've. After the first format (FAT not FAT32) I wasn't able to format the dri've again.
I finally decided to manually download the newest firmware (MuVoTX_PCFW_LF__22_03.exe). I've read that others have had problems with it. I removed the player from the usb port then (read somewhere here to do this) held the power button down while I reconnected it. I then ran the file above. It appeared to hang again. I also got the standard windows "new hardware detected" window and went ahead and clicked "let windows install new software (recommended)" (or something like that).
It took awhile but it finally completed. I noticed the player display was completely dead now though. Never happens when connected to the usb. I clicked on the "Safely Remove Hardware" (recommended in the manual before disconnecting). Sure enough, the player was completely dead. No power up or anything. I chuckled to myself cuz I had read this same problem over and over.
I connected it to the usb port again. Windows Explorer did not see it. I RERAN "MuVoTX_PCFW_LF__22_03.exe". The player was immediately detected! Second time around a dialog box appeared showing old firmware (0.00.0), new firmware (.22.03) and an option to format data area, which I took. Viola!!! SUCCESS !!! Upgrade completed!!!
I'm happy to report that I am now able to load mp3's on my Muvo TX. It's working fine so far. I'll report back if anything changes.
ps.
Tip - Keep in mind the "number of files" limitations on the player. Use folders! A folder with multiple mp3's is still considered one file in itself.

My Muvo was toast. Same issues as others here. "No Music" message when Windows Explorer clearly showed mp3 files plus data files. I was even able to copy (backup) files to my laptop. I highly recommend this before you start anything!
After that, though, deleting files caused all sorts of problems. Most notably was the hanging or freezing every time windows explorer/windows format/(even)IE creative.com site autoupgrade tried to access the player. I formatted the dri've. After the first format (FAT not FAT32) I wasn't able to format the dri've again.
I finally decided to manually download the newest firmware (MuVoTX_PCFW_LF__22_03.exe). I've read that others have had problems with it. I removed the player from the usb port then (read somewhere here to do this) held the power button down while I reconnected it. I then ran the file above. It appeared to hang again. I also got the standard windows "new hardware detected" window and went ahead and clicked "let windows install new software (recommended)" (or something like that).
It took awhile but it finally completed. I noticed the player display was completely dead now though. Never happens when connected to the usb. I clicked on the "Safely Remove Hardware" (recommended in the manual before disconnecting). Sure enough, the player was completely dead. No power up or anything. I chuckled to myself cuz I had read this same problem over and over.
I connected it to the usb port again. Windows Explorer did not see it. I RERAN "MuVoTX_PCFW_LF__22_03.exe". The player was immediately detected! Second time around a dialog box appeared showing old firmware (0.00.0), new firmware (.22.03) and an option to format data area, which I took. Viola!!! SUCCESS !!! Upgrade completed!!!
I'm happy to report that I am now able to load mp3's on my Muvo TX. It's working fine so far. I'll report back if anything changes.
ps.
Tip - Keep in mind the "number of files" limitations on the player. Use folders! A folder with multiple mp3's is still considered one file in itself.

Creative MuVo TX FM Firmware Upgrade 1.18.02 don't support thai correc

About new MuVo TX firmware. It show thai character for mp3 filename only.
Not for mp3 ID3 tag. Anyone has suggestion for correct this.

About new MuVo TX firmware. It show thai character for mp3 filename only.
Not for mp3 ID3 tag. Anyone has suggestion for correct this.

Which CreativeLabs MP3 player to upgrade to? Muvo-NX can't rewind & can't select next

I'm pretty happy with my Muvo NX, but I'm frustrated that I can't rewind within an MP3 and the play-order is dictated by the alphanumeric name sort of the MP3 files. How far up in the Creative Labs MP3 player (flash memory or disk) line would I have to go to get these two features?
Thanks....LyleMessage Edited by lyle on 2-05-2004 04:6 AM

Jason,
I have the Creative Muvo N200 gb, just got it yesterday, latest firmware (I think, it is version: .0.02) but I tried the fast forward inside playing back a mp3 and it does not work. I am listening to a recorded am radio show (I am a paid subscriber, the file is a mp3 file), and want to resume where I left off but each time I come back to the file, it starts over at the beginning and I want to forward thru what I've heard already. Can you please be very detailed in how to use the forward? Does the Cue setting have to be on/off/cancel or what? Also, when you see the "On" in Cue, does that mean it is on now, or to press scroll-select to make it on? I also don't know how to cue/review other than toggle the setting, and I don't exactly know what cue/review does. Last, what is "skip section" that audible.com says the muvo n200 can do with this firmware version?
Thanks in advance.
Roleigh Martin
Edina MN

What should I do with my MuVo Sli

Hi There. Basically im trying to get some advice on what to do with my Creative Muvo Slim (52 MB) DAP. I originally bought it 02/09/05 but had to get it exchanged on 02/4/05 because the backlight would never turn off even with firmware upgrades.
So I got the new one and everything has been working great until about a week ago. One day, I turned on my player and didn't hear anything. Restarted and it worked, but then after about two songs it froze. Had to take out battery to restart then it worked fine for about an hour. Suddenly a song was playing that I wanted to play a little louder, but the player froze again, but was still playing the song until it froze completely at the end.
Finally I took out the battery and restarted again. But I didn't play anything. I hooked up the original earphones and hit play, and it worked fine. But all of a sudden I VERY LIGHTY ran my finger across the player and it froze again. Then after about 20 times of testing, it turns out that the player ALWAYS freezes when im touching it. If there is absolutely no movement, it plays fine. If im careful, I can change songs, volume, settings, etc. But the only way to do so is like a surgeon while placing the player on top of my palm.
Finally after about 2 days, I was listening to it when it finally just turned off. It didn't want to turn on anymore for the rest of the day. I tried the next day and it worked for a while, so I backed up my music (All MP3's) then it shut down after a few minutes.
Since the first thing I thought was maybe a bad battery. I got someone to lend me the one from theirs. But it unfortunately didn't turn on. And when mine turns on, the battery has a full three bars.
Since this is getting kind of long, Im thinking it might be something hardware related, but I have never once dropped or mistreated this DAP in any way. Not a single dent on it. Hell, I never took it out of it's black case Except for the battery change. And whenever im not using it, I put it in a padded drawer all by itself. Locked, of course.
I bought this at circuit city for $39.99 +Tax , and this "Protection Plan" for another $34.98 paying a total of $86.52 w/Tax . I called and they said that it doesn't qualify for a return because the damage was done "Accidentally" and that it was My Fault. I said it was BS, so now im kinda stuck here. So in short ( Heh )

I'd try Circuit City again. If they still give you the "accident" BS, try the Better Business Bureau, your state's Attorney General, arbitration, or small claims court. If you need repairs while your dispute is pending with Circuit City, contact Creative Customer Support; you should still be under at least the parts warranty, and will only have to pay $25 for labor (which Circuit City should be made to reimburse you for).

I need some help with updating my MUVO

Hi guys! I have gb muvo 200. At the moment the veersion of my firm ware is . 02. 0. I want to uggade it to a newer one (_05_02). I downloaded it but when I start it it says put you mp3 player in reocvery mode. I knew how to do that and I did it. But then when I sart the program is does not find my player! It is just searching for ages! So I cant update it((((((((((((((( Help please!)

Here's a step-by-step list of what to do to upgrade your player. Let me know which steps fail and why.
Download and install latest drivers file.</LI>
Download latest firmware for V200.</LI>
Press and hold Play button on V200 and then connect it to your USB port.</LI>
Run through Add Hardware Wizard (use Find Automatically method) to setup drivers for Recovery Mode.</LI>
Run firmware installer program.</LI>
PB

Upgrade Muvo Tx to Muvo TX FM

Similar Messages

Maybe you are looking for