Upgrade NCS1.1.1.24 to PI 1.3.0.20

Hello Everyone,
This is a question regarding to the upgrade of NCS 1.1.1.24 ot PI 1.3.0.20, which is the latest version released on Cisco.com. We have been waiting for the PI 2.0, however, it seems that we have to be a little more patient.
We currently have to physical PRIME-NCS-APL appliances in our environment. They are HA configuration. Following are questions and steps I am thinking to follow during the upgrade. Please advise if I miss anything or anything wrong.
1. Disable HA before the upgrade;
2. Shutdown NCS, issue NCS stop command to stop NCS services on both Primary and Secondary appliances? or only the Primary box? .
3. Install the required patch file ncs_patch-1.1.1.24-upgrade-12.tar on Primary box, and then do the inline upgrade by using:
application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz xxxx(repo)
4. If everything is going WELL, the the PI installation/upgrade should be successful on the Primary box..
5. Question then come:
How the secondary box will be done? should the Secondary appliance be upgraded similar way from NCS 1.1.24 to PI 1.3.0.20 first before it is joined to HA again? Or Just start the HA and wait for it to be synchronized from The Primary PI1.3.0.20 box?
Thanks in advance for your help. Please don't hesitate to point out any mistakes or missed steps. To me, specifically I am confused with the step 5. I could not find any threads here mentioned that part?
Thanks,
Joey

Hi Richard,
Thank you for your help. I realize that in order to have HA configured, both boxes have to have the identical images/versions of software. I will do my upgrade shortly and will keep everybody posted if i run into any problem..

Similar Messages

Upgrade WCS 7.0 to PI 1.2 via NCS 1.1

Hello all,
we have started to do the upgrade from WCS 7.0 to PI12. In order to do that we first need to upgrade to NCS 1.1. We have ordered the following from Cisco:
R-W-PI12-M-K9
WCS 7.0 to Cisco Prime   Infrastructure 1.2 Migration
N/A
14 days
No
N/A
1
1.995,00
1.995,00
0
1.995,00
R-PI12-BASE-K9
Prime Infrastructure 1.2 Base   License and Software
N/A
14 days
Yes
N/A
1
0,00
0,00
0
0,00
L-PI12-LF-500-LIC
Prime Infrastructure 1.2 -   Lifecycle - 500 Device Lic PAK
N/A
14 days
Yes
N/A
1
0,00
0,00
0
0,00
L-PILMS42-500-M
Prime Infrastructure LMS 4.2 -   500 Device Upgrade Lic
N/A
14 days
Yes
N/A
1
0,00
0,00
0
0,00
L-PI12-LF-100-LIC
Prime Infrastructure 1.2 -   Lifecycle - 100 Device Lic PAK
N/A
14 days
Yes
N/A
3
0,00
0,00
0
0,00
L-PILMS42-100-M
Prime Infrastructure LMS 4.2 -   100 Device Upgrade Lic
N/A
14 days
Yes
N/A
3
0,00
0,00
0
0,00
L-W-PI12-500-M
WCS to Prime Infrastructure 1.2   Migration 500 Device
N/A
14 days
No
N/A
1
0,00
0,00
0
0,00
L-W-PI12-100-M
WCS to Prime Infrastructure 1.2   Migration 100 Device
N/A
14 days
No
N/A
3
0,00
0,00
0
0,00
I have done the upload of the XML File from our WCS 7.0 installation to get the License File. But on the NCS 1.1 installation the following License is needed first (Cisco Prime Network Control System 1.1 Config Guide):
NoteBefore adding the licenses that are migrated from your WCS installation, apply the L-WCS-NCS1-M-K9 license. The licenses migrated from WCS are generated as “ADD” licenses, and you cannot apply them unless you apply the L-WCS-NCS1-M-K9 license.
L-WCS-NCS1-M-K9 is the Product Number to do the upgrade from WCS 7.0 to NCS 1.0, R-WCS-PI11-M-K9 is the product number to dothe upgrade from WCS 7.0 to NCS/PI 1.1.
If I try to install just the License File I get from Cisco using the XML file from our WCS 7.0 installation, I get the error "Unable to add any license without an NCS (L-NCS-1.0-K9) license.".
But how do a get this license if I ordered R-W-PI12-M-K9 (WCS 7.0 to PI1.2 Upgrade License)? What is the step to get the right License?
Many thanks in advance for any help on that issue.
Best regards,
Hans

Hello Joe,
no. The information in the deployment Guide (the link i proveded before) is wrong.
You still need to follow the upgrade path WCS 7.0 -> NCS 1.1 (here you have to use for example 1.1.1.24, because 1.1.2.12 cannot be upgraded to PI 1.2), then you can upgrade NCS 1.1 to PI 1.2 (if you upgraded the WCS to NCS 1.1.1.24 you need to install a patch ncs_patch-1.1.1.24-upgrade-12.gz, for other 1.1 releases you need a different patch).
The major problem was the licensing. Because with the order of the Upgrade Licenses from WCS 7.0 to PI 1.2 I got "normal licenses", for PI 1.2, a Base License and Lifecycle Licenses (the number of Lifecycle Licenses matches the number from the order).
Because we ordered the WCS 7.0 to PI 1.2 Upgrade Licenses I also ordered the NCS Appliance with the PI 1.2 (before I thought a direct upgrade from WCS 7.0 to PI 1.2 should be possibel, why not, if you can order the licenses with the description Upgrade License WCS 7.0 to PI 1.2 :-)). So I had to downgrade the NCS Appliance to NCS 1.1. After the downgrade the NCS Appliance came up without any licenses. So the major porblem was that I could not use the PI 1.2 licenses (they are not installable on NCS 1.1). So I got a demo/temporary license from Cisco for NCS 1.1 to do just the migration. After the final upgrade to PI 1.2 I installed the base and the lifecycle licenses and now everything is fine.
Best regards,
Hans

WCS and LMS to Cisco Prime Infrastructure 1.3 Upgrade

Hello,
Our customer is currently having WCS for 500 devices and LMS 3.2 for 1500 devices. We are planning to upgrade to Cisco Prime Infrastructure 1.3.
I want to check is the upgrade procedure that we have planned is ok or we have missed something.
Phase 1: WCS to CPI 1.3 upgrade
1. Check that WCS is at 7.0.230.0 version
2. Export WCS database
3. Install NCS 1.1.1.24 software
4. Contact cisco to obtain trial license for NCS software (L-WCS-NCS1-M-K9 license).
5. Migrate WCS license and import it in NCS software
6. Migrate WCS data to NCS software using ncs migrate command
7. Patch NCS software
8. Inline upgrade to CPI 1.3 software
9. Install proper licenses on CPI 1.3 (WCS and LMS device count)
My concern in this first phase is should I use NCS large image since our Cisco Prime Infrastructure 1.3 software should manage 2000 devices at the end.
Or is it better not to perform inline upgrade and insted go with exporting data from NCS and then importing them to CPI 1.3 that is going to be installed separately?
Phase 2: LMS 3.2 to CPI upgrade
1. Export LMS 3.2 database
2. Install LMS 4.2 software
3. Install license to LMS 4.2
4. Restore data from LMS 3.2 to LMS 4.2
5. Direct upgrade from LMS 4.2 to 4.2.2
6. Export the device list with credentials from LMS 4.2.2 and import it as a Bulk Import in CPI 1.3
At the end we will have CPI 1.3 and LMS 4.2.2 software running.
Is it possible to directly upgrade from LMS 4.2 to LMS 4.2.4 and then import data to CPI 1.3 or we need to go with 4.2.2 version?
Regards,
Jelena

Hello Marvin,
We have restored LMS 3.2 SP 1 database on LMs 4.2 and we have got some error messages during restore. Please see our restore output:
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/res
resolver.pl           restoreDBTableMig.pl restoreJRMMig.pl      restorebackup.pl
[kalms4/root-ade ~]# /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /opt/BKP/
Restore started at : 2013/12/05 14:11:58
Please see '/var/adm/CSCOpx/log/restorebackup.log' for status.
     USER ID is ..................................... : sysadmin
     OS of the backup archive is..................... : Windows
INFO:The backup archive is from a different OS. Your current Platform is: Soft Appliance .
You are attempting to perform a Cross Platform Restore..
Do you wish to continue (Y/N) [Y] :Y
     Generation to be restored is ................... : 0
     Backup taken from............................... : /opt/BKP/
     Common Services version in the backup data is... : 3.3.1
     Common Services is installed in................. : /opt/CSCOpx
     The temp folder for this restore program........ : /opt/CSCOpx/tempBackupData
     Applications installed on this machine ......... : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][cwportal][ipm][upm][cvw][cwlms]
     Applications in the backup archive ............. : [Common Services][Campus Manager][Resource Manager Essentials][Device Fault Manager][opsxml][cwportal][ipm][upm][cvw]
     WARNING: The list of applications installed on this CiscoWorks server does not match the list of
              applications in the backup archive. If you restore data from this backup archive,it may
              cause problems in the CiscoWorks applications.
              Do you want to continue the restore operation? (y-continue or n-quit, y/n)?Y
     Applications to be restored are................. : [Common Services] [Campus Manager] [Resource Manager Essentials] [Device Fault Manager] [cwportal] [ipm] [upm] [cvw]
     Available disk space in NMSROOT................. : 86451488 Kb
     Required disk space in NMSROOT.................. : 35906524 Kb
     (The temp and NMSROOT are on same device, therefore this required disk space includes temp space)
Copying the backup files to the temporary location [/opt/CSCOpx/tempBackupData]
preRestore of [Common Services] has started.
preRestore of [Common Services] has completed.
preRestore of [Campus Manager] has started.
preRestore of [Campus Manager] has completed.
preRestore of [Resource Manager Essentials] has started.
preRestore of [Resource Manager Essentials] has completed.
preRestore of [Device Fault Manager] has started.
preRestore of [Device Fault Manager] has completed.
preRestore of [cwportal] has started.
preRestore of [cwportal] has completed.
preRestore of [ipm] has started.
preRestore of [ipm] has completed.
preRestore of [upm] has started.
preRestore of [upm] has completed.
preRestore of [cvw] has started.
preRestore of [cvw] has completed.
doRestore of [Common Services] has started.
          Cross Platform Update started.
          Cross Platform Update completed.
          License check started.
             WARNING: The license details in the server are different from the backup data.
                      After restoring, please check the license available in the server.
             WARNING: Your current license count is lower than your earlier license count.
                      If you restore the data now, devices that exceed the current licence count
                      will be moved to Suspended state.
          License check completed.
          Restoring certificate.
             WARNING: Cannot evaluate the hostname, hence the certificate
                      may be from this host or another host.
                      [ Certificate not overwritten ]
          Restored Certificate.
          Restoring Common Services database.
          Restored Common Services database.
          Restoring CMIC data.
          Restored CMIC data.
          Restoring CMC data.
          Restored CMC data.
          Restoring Security Settings.
          Restored Security Settings.
          Restoring DCR data.
          Restored DCR data.
          Restoring Certificate key store.
          Restored Certificate key store.
Restoring DCNM CrossLaunch data.
          Restored DCNM CrossLaunch function.
          Restoring JAAS configuration.
          Restored JAAS configuration.
          JRM Job Migration started.
          JRM job Migration done.
doRestore of [Common Services] has completed.
doRestore of [Campus Manager] has started.
          Cross Platform Migration for Campus started.
Cross Platform update Starts for Campus
doRestore of [Campus Manager] has completed.
doRestore of [Resource Manager Essentials] has started.
10% of RME Restore completed
30% of RME Restore completed
50% of RME Restore completed
70% of RME Restore completed
100% of RME Restore completed
doRestore of [Resource Manager Essentials] has completed.
doRestore of [Device Fault Manager] has started.
10% of DFM Restore completed
30% of DFM Restore completed
50% of DFM Restore completed
80% of DFM Restore completed
Going to modify Eight PM report
Modified Sucessfully Eight PM report
100% of DFM Restore completed
doRestore of [Device Fault Manager] has completed.
doRestore of [cwportal] has started.
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.script ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.script
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db//portal.log ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/db/portal.log
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultUserCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultUserCommunity.properties
Src file : /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties//defaultCommunity.properties ,,, Destination file : /opt/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
File Copied: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
Error while coping the File: /opt/CSCOpx/tempBackupData/cwportal/CSCOpx/MDC/tomcat/webapps/cwportal/WEB-INF/classes/data/ciscoWorks/properties/defaultCommunity.properties
doRestore of [cwportal] has completed.
doRestore of [ipm] has started.
        10% of IPM Restore Completed
        30% of IPM Restore Completed
        50% of IPM Restore Completed
        60% of IPM Restore Completed
        70% of IPM Restore Completed
        100% of IPM Restore Completed
doRestore of [ipm] has completed.
doRestore of [upm] has started.
HUM database restore starts
INFO:STOP= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
SQL Anywhere Command File Hiding Utility Version 10.0.1.4239
INFO: Database Shutdown is in Progress..Please wait
INFO: Stop Engine Args= /opt/CSCOpx/objects/db/bin64/dbstop -q -y -c dsn=upm
INFO: After Database Shutdown RC= 2304
root=C:\PROGRA~2\CSCOpx\databases\upm\upm.db
DBUTILS: Inside Cross Platform
INFO: Current Database password does not match the password of Database being restored
INFO: Using the Password of the Database being restored
HUM database restore successfully completed.
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Threshold/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Custom/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Poller_Failure/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/TrendWatch/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPORTUtilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Memory_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_Availability/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Threshold_Violations/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/CPU_Utilization/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/PoEPSEConsumption/README.txt
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate
File :/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/Quick/Interface_ErrorRate/README.txt
Directory is reportsStarted changing property .
linux
Restored HUM configuration file successfully.
doRestore of [upm] has completed.
doRestore of [cvw] has started.
doRestore of [cvw] has completed.
postRestore of [Common Services] has started.
postRestore of [Common Services] has completed.
postRestore of [Campus Manager] has started.
postRestore of [Campus Manager] has completed.
postRestore of [Resource Manager Essentials] has started.
postRestore of [Resource Manager Essentials] has completed.
postRestore of [Device Fault Manager] has started.
postRestore of [Device Fault Manager] has completed.
postRestore of [cwportal] has started.
postRestore of [cwportal] has completed.
postRestore of [ipm] has started.
postRestore of [ipm] has completed.
postRestore of [upm] has started.
postRestore of [upm] has completed.
postRestore of [cvw] has started.
postRestore of [cvw] has completed.
Restored successfully.
Are this errors going to affect our LMS 4.2 operations?
Then we have upgraded to LMS 4.2.2 and exported data and credentiales for PI import.
On PI 1.3 we have installed WCS 500 devices upgrade license and LMS 1500 upgrade license and now we are having 2000 devices lifecycle license. We have successfully restored WCS data in PI and we have imported LMS devices as bulk import. What is strange is that we have this message in prime regarding licensing:
On LMS 3.2 our customer had saved unlimited number of configuration versioning. After upgrading to LMS 4.2 we can only see last 3 configurations regardless of unlimided number of configurations in previous LMS, so my question is where can we find older configurations in LMS 4.2?
We are planning to turn unlimited versioning on CPI 1.3 now, so our customer will again have feature that they need. Do you have some experiance regarding disk space when all device configurations are stored forever?
Thank you for your help.
Regards,
Jelena

IPod no longer works with car stereo since upgraded MBA & iTunes

My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
You can try to blow it clean, if you have a can of compressed air or gas.
Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
The Reset sequence may send a signal to the Car stereo to do the right thing

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Ipod touch can no longer connect to XP following Apple upgrade, HELP !

This is a nightmare. My son has an ipod touch (8gb)purchased a couple of months, and it's been fine until a couple of days ago. I downloaded some music for him, and just about to synch when Apple informed me on itunes of a software upgrade, so naturally I did this. However, it could not complete it saying there was a problem installing the hardware. The ipod then had a permanent picture of a usb cable pointing towards the itunes logo. Itunes no longer recognises this ipod or my own ipod as a device.
I'm not a techhie expert, but I generally know my way around computers, however I could not resolve this.
I called the Apple technical support desk, where I spent 1 hour 45 minutes with 2 different advisors who could not resolve this. We installed and re-installed various components from drivers to itunes to anti virus software, however nothing could change. There was simply no recognition of the ipod at all when connected.It does give a pop up message to restore the ipod, however you can't actually click on the restore button because to have to get rid of the pop up message first, then the screen with the restore facility disappears.
Windows xp is continually popping up a message saying " FOUND NEW HARDWARE WIZARD There was a problem installing this hardware. Apple Mobile USB driver. An error occured during the installation of the device. The system cannot find the file specified."
You then have to click on finish, however the message keeps coming back. We kept going round and round in circles with the technical support people, where it was left that I should start removing programmes on my computer to see if any of those are causing a problem. I have had the same spyware for the last 12 months now and never had a problem before, nor any other programmes.
I booked a genius appointment at my local Apple store today where the assistant reset the ipod to factory settings so it could at least work. I explained the situation, however 15 minutes was never going to be long enough to look into it, and a restore was all they did. Obviously all of my programmes were lost, however when I got home and plugged it back into the computer again, it could not be recognised by itunes and i got the same pop up message. Luckily we have not spent alot on downloads, however my son has lost his music now and it cannot be connected or upgraded. It's under guarantee however a software upgrade by Apple has totally messed my computer up. I really don't know who to turn to now as both the service support and store has not rectified this, something I feel has been caused by Apple.
Any advice is appreciated. Thanks

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Just upgraded HDD, now how do I get my data back??

I just upgraded my stock 60GB HD to a 120GB Seagate Momentus 5400 ($100). This is what I did:
1. Before removing the 60GB HD, i created a read-only disk image of my HD(with Disk Utility on the OSX install CD). I put this disk image on my USB external hard drive.
2. Physically replaced the 60GB with the 120GB.
3. Now, I boot up the computer to the OSX install CD (since it is a blank new HD). I open up Disk Utility on the install CD, and try to restore the image i created (on my external USB HD) to my new 120GB internal drive. I am able to select the image to restore, but cannot select my internal drive as the destination.
I have all sorts of music, movies, applications...etc. on my old HD that I want on my new drive.
I want to have my computer be identical to before I upgraded, just with a larger HD. Is this possible?
I have tons of external USB HD space to use if needed, and I also still have the old HD... if I need to create a different kind of disk image or something.
Please help!
Macbook 2.0GHz (White) Mac OS X (10.4.8)

I did this already. I failed to mention it in my first post. I have my HD "111.8 GB Seagate..." and underneath it: "Macintosh HD". Still can't restore an image to the "Macintosh HD" volume.

BSI Tax Factory Upgrade 8.0 to 9.0

Hi BSI,
We are upgrading our BSI tax Factory from 8.0 to 9.0. We are running:
Windows 2008 R2
SQL Server version 10.50.1777
I'm able to connect to the database using login TF90 through SQL Server Management Studio, the ODBC Data Source Administrator and the TaxFactory Client is connecting fine too.
But when running report RPUBTCU0 from the SAP system , its caught under ABAP dump-> SYSTEM FAILURE.
Looking at the error.txt.
=Running connect_db_taxfactory
BSI dataset -> 101
ConnectToDataSource... Starting
ConnectToDataSource...Succeeded
Connect to Dataset Error string = 101
ConnectToDataSet... Starting
ConnectToDataSet...failed
Error String -> 4020 - THERE IS NO VALID LICENSE INSTALLED FOR HOST HCA-MSAP68:UNKNOWN.
=RFC error
operation/code connect_db_payroll_tax_calc_us
key RFC_ERROR_SYSTEM_FAILURE
status
message See RFC trace file or SAP system log for more details
internal status .
The machine key is successfully installed.
Please guide what we are missing here.
Please contact me at +60123675076 (malaysia) at anytime.
Thanks.
Thava

We managed to solve this by changing tf90server.bat file.
from - I:
CD I:\BSI\Server9.0
tf90server.exe %*
To - I:\BSI\Server9.0\tf90server.exe %*
Now we could run report RPUBTCU0 without error.
Thanks.
Thava

Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcome

Hi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal

Lock-ups on MCS-7825 after after OS Upgrade to 2000.4.4aSR6

About 3 weeks ago, I upgraded some MCS-7825 & MCS-7835 servers to 2000.4.4aSR6. Since then, one of the 7825's has been rebooting on its own almost twice a day. The other 7825 and 7835s are operating fine.
Anybody else encountering a problem with this? I see in the release notes, some BIOS and firmware updates are included for the 7825, and am suspecting this is the problem.

My problems actually turned out to be hardware, I think. I reviewed the logs and found out it had been happening for several months.

Can I upgrade my laptop?

I have the Satellite X205-S7483 w/ 2gb ram.
Can I add more memory and can I possibly upgrade the video card? I have a Geoforce 8700m gt 256MB
Thanks!

You have a User's Manual right there on your desktop. Go to Start/All Programs/My Toshiba/User's Guide. Or you can click on Download at the top of this page, enter the model info requested and you'll find the User's Guide and lots of other info for your model.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Graphic Card Upgrade for HP-Pavilion dv6t-7000

Hello. I have the HP Pavlilion dv6t-7000 with the NVIDIA GT650M 1GB grpahics card. Now because of my work, i need to extends my graphic card memory. So I want to ask if my laptop is possible to upgrade to GT650M 2GB card.
My product number is A5F74AV. And my wannary is end on 8/24/2013.
And this laptop is a gift of my aunt from USA, and I'm living in Viet Nam now. So if yes, can HP Vietnam do the upgrade for me? My aunt's family is very busy so I can't resend my laptop and ask them to return to you.
Thank you very much!

Hi:
The only way to upgrade the video card in your notebook is to replace the entire motherboard which would cost as much as buying a new notebook with better graphics.
If you had HP do the upgrade, it would probably cost more than buying 2 notebooks with better graphics than yours.

Voice Memos Issues After IOS 8 Upgrade

After upgrading to IOS 8 on my iPhone 5s, the majority of my voice memos are missing and the ones that remain no longer have titles or even play back on my phone. Any ideas?
Thanks.

I was able to recover my voice memos, though the original titles are gone.
I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

NULL and Unspecified in Dashboard prompts after upgrading 10g to 11g OBIEE

Hi All,
We are working on OBI upgradation project from 10g to 11.1.1.6.5. We are facing one issue in Dashboard prompt level. If we can create Dashboard prompt on a column, its giving "NULL", "Unspecified" additionally. But, in 10g there are no extra values.
And the 10g, 11g instances are pointing to the same database and there are no NULL, Unspecified values in Database level.
Through some blogs and articles we found some solutions n are below.
To remove NULL:
-->Go to the Physical Column properties in Physical Layer and Disable the Nullable option by uncheck the box.
-->Go to the Database Features in Physical Layer and disable value to NULL_SUPPORTED.
-->Go to Edit Dashboard Prompt, in Choice List Values drop-down list select SQL Results.
To remove Unspecified:
-->Go to Edit Dashboard Prompt, in Choice List Values drop-down list select SQL Results, then write the SQL statements as columnname is not equals to "Unspecfied" ( In this way we can able to remove Null's also.)
-->Go to Content tab of LTS, in Where clause write an SQL query to restrict Unspecified values.
Note: CHeck with ETL, because if they maintains the Default value is Null when the Datatype is Character and they can maintain 9999 or #### if the datatype is Numeric. And check the Physical query and debug it carefully.
But, we have very big Repository and we have huge no.of Dashboard prompts. So, its not an easy thing to manage by using above solutions. Correct me if there are any mistakes in above.
Any ideas on this...?
Appreciate your help on this..!
Thanks in Advance,
Raghu Nagadasari

Hi Frnds,
As of now, i found the only solution for the above mentioned issue that how to avoid NULL in dashboard prompt level:
Go to the Physical Column properties in Physical Layer and Disable the Nullable option by uncheck the box.
We have done this manually for all tables.
Appreciate if u have any other ideas.!!
Thanks,
Raghu Nagadasari

I have upgraded from 3.5 to 4.1 , it downloads to the folder but still uses the 3.5

I'm getting an urgent to update on my screen so I have updated from 3.5 to 4.1 , it has down loaded to the firefox folder but still brings up the old firerfox.
I have downloaded it 3 times and rebooted around 6 times but still the same screen telling me to upgrade as the older version is not now protected.
Kind Regards
Dennis

It looks that the update wasn't successful because your "More system details" list still shows a Firefox 3.5.19 version.
If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Upgrade NCS1.1.1.24 to PI 1.3.0.20

Similar Messages

Maybe you are looking for