Upgrade NI Configurator version from 3.2 to 3.2.3

Hello, I upgrated my NI Configurator version from 3.2 to 3.2.3. Now , when a FF device is coming through the bus which is imported per EDD the Configurator crashes. When the device is imported per a simple DD everything works fine. In Version 3.2 also EDD based devices work also fine. What is to do?How can I go back to version 3.2 because of the licensenumber?

Hello Peter,
Could you let me know the device model? NI-FBUS 3.2 and 3.2.3 use different DDS version. 3.2 support DDS 5.0 and 3.2.3 supports DDS 5.0.5.
It seems that the problem is on the different DDS version.
You can go back to 3.2 by simply removing 3.2.3 and install 3.2 again. 3.2.3 is a free upgrade, so these two version use the same license.
Feilian (Vince) Shen

Similar Messages

  • Steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.

    Can anyone help me with the steps to upgrade my Oracle version from 11.1.0.6 to 11.2.0.1 in windows.
    Thanks in advance.

    If you are going to upgrade, you should upgrade to the latest 11gR2 patchset (currently 11.2.0.4). At a high level -
    1. Install 11.2.0.4 into a new separate ORACLE_HOME - see MOS Doc 1562139.1 and Contents
    2. Apply the latest 11.2.0.4 PSU bundle available for Windows - see MOS Doc 1454618.1
    3. Use DBUA to perform the upgrade - MOS Doc 870814.1 and Contents
    Also see
    MOS Doc 1645862.1

  • Upgrading the report version from Crystal Reports 10 to Crystal Reports 11 without REDESIGN

    Post Author: Chakradhar
    CA Forum: Upgrade to XI 3.0
    HI All, Please provide a solution for this.. Is there any way to upgrade the version of a report without redesigning the report? If we upgrade the report without redesign, dont we lose the special features of the new version? Actually i want to the change the report version from Crystal Reports 10 to Crystal Reports 11. Thanks..

    Post Author: rodneyaz
    CA Forum: .NET
    I'm having the same issue.  Worked fine for me in XI, but stopped working when I upgraded XI to XI R2.
    Please post a follow-up if you get this resolved!  Thanks!
    RodneyAZ

  • HT4972 Upgrade iPhone software version from 4.3.4 to the latest available

    I am trying to upgrade my iPhone software version from 4.3.4 to the latest and keep getting this message whenever I hit <Update> or <Restore>.  "The iPhone software update server could not be contacted" - what should I do?

    Start by making sure you have disabled any firewall or antivirus programs.

  • Impact to Portal on upgrading the IE version from 6 to 8

    Hi,
    We are in a plan to upgrade our Internet Explorer version from 6 to 8.
    Can anybody let me know what will be the impact on Enterprise Portal iviews (WD iviews, BSP, Standard iviews)
    Regards,
    Pradeep

    Hi Pradeep,
    The official support comes with SPS20 for IE8 on Windows XP Professional and with SPS21 on Windows 7. You will find information within the PAM -  http://service.sap.com/pam
    Also, check this thread for more details - IE 8 Compatibility with Portal 7.0
    Regards,
    Sen

  • How to upgrade application server version from 10.1.2.0.2 to 10.1.2.3.0

    please tell the metalink exact link from where i can download patch to upgrade my app server.

    Here is the direct download link:
    http://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622
    Thanks
    Shail

  • I have an Iphone 3G and I can't upgrade my IOS version from 4.2.1 to a 4.3.

    Hi, I can't use some apps because my ios is not the latest but i cannot upgrade it further than 4.2. ¿Does anyone knows how can I fix this?

    Sorry, iOS 4.2.1 is the highest possible for an iPhone 3G.

  • Upgrading ORDS version from 2.0.9 to 2.0.10

    Hello ORDS Community,
    I am trying to upgrade the ORDS version from 2.0.9 to 2.0.10. The installation instructions tell me to unzip, copy the ords.war file and then configure the setup values. I did that (on Dev1 server), ords was upgraded to 2.0.10 and it works great.
    Now I have to do this on about 10 other servers. Is there a way that I can copy the files for ORDS version 2.0.10 (from server Dev1, which I just upgraded in the step above) and push it to all the other servers (for e.g. Dev2)? I copied the files from <Tomcat directory>webapps/ords folder from Dev1 to Dev2. This did not help. The APEX frontend on Dev2 still shows the listener version as 2.0.9.
    Can you tell me if there is a way to achieve this?
    Thanks!!

    Hi,
    You don't need run whole configuration step if you upgrade.
    You can just tell to new war file where is your old config files, move new war to Tomcat webapps folder overwriting old war and restart Tomcat.
    Here is how you set configdir:
    Lets say your ORDS config files are in /tmp/apex or /tmp/ords folder
    Then run
    java -jar ords.war configdir /tmp/
    Regards,
    Jari

  • Why I can't import iMovie into Apple Configurator without asking me for more codes. If iMovie is free, and I upgraded the latest version and to Yosemite.

    Previously, our school bought a number of codes for iMovie. One of our MacAirs that supervises some iPads through Apple Configurator showed that it was free. However, another Mac Air did not saying that I needed to import more codes. I upgraded everything, software, iMovie in iTunes, and Apple Configurator. Everytime I upload iMovie into Configurator it shows I only have 2 codes, while on the other MacAir, it shows it as free.

    Can I import photos from iPhoto ('08; 7.1.5) into latest version of Aperture without upgrading my iPhoto to the iPhoto '11 version?
    To elaborate a bit on TD's answer:
    You can import only folders of images or selected image files that have been exported from older iPhoto libraries, not the libraries themself.
    Aperture 3.4.5 cannot work with iPhoto Libraries that have not been upgraded to iPhoto 9.4. or later at all:
    You cannot open them in Aperture:
    And you cannot import them as a library to create an Aperture library from the older iPhoto Library.
    Without upgrading to iPhoto '11 your only option would be to export your original images and the edited versions from iPhoto '08 and to import the folders of images into Aperture. That would be a lot of work, a waste of disk space, and break the lossless workflow.  You will clutter your Aperture library with duplicates (version and edite image) that are no proper original-version pairs.
    For a smooth transit from iPhoto to Aperture I strongly recommend to bite the bullet and to upgrade to iPhoto '11  to upgrade your iPhoto libraries to the new version 9.4.3 to preserve all the previous work - albums, books, ratings - you have done in iPhoto.
    Aperture 3.3: Using a unified photo library with iPhoto and Aperture
    Regards
    Léonie

  • I did an upgrade from 4.0 to the new 6.0 about 5 months ago. After the upgrade installed it said reboot system to apply upgrade. Now it wont open and keeps telling me that the older version needs to shut down the computer and upgrade the old version.

    Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

    Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

  • I had to erase my data to upgrade my iPhone software from an older version. I backed up first, but seem to have lost all my notes.   Does anyone know how retrieve my old notes?

    I had to erase my data to upgrade my iPhone software from an older version. I backed up first, but seem to have lost all my notes.   Does anyone know how retrieve my old notes?

    Is this the note you are referring to:
    Not sure if this can help you.
    I checked my notes. They are stored here:
    MacintosHD/Users/MYHOME/Library/Containers/com.apple.notes/Data/Library/CoreData /ExternalRecords/
    xxxxxserie.of.numbers.probably.yours.are.different/IMAPNote/_records/0/
    If I go tot this window on finder and enter Time Machine I can go back and find old notes...
    If so, am I doing this on my new hard drive on on the time machine? When I do this on the time machine, what is "my home"? Also, I am unable to find "containers".
    If I go to users/jeff/library, then I see components, compositions, contextual, etc, but not containers.
    Thanks

  • After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone help?

    After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone please help? I am not an advanced user and I would like my photos back, having had no idea I would lose iPhoto in the upgrade!

    Thanks petermac87...but for some reason, the only purchases showing are OS. So assuming iPhoto is in Mountain Lion, I was hoping to look under Hidden Items there as you suggested, but there is no option for that. Only option is to download Mountain Lion again, not iPhoto specifically. Any ideas welcome!

  • Upgraded to newest version of Firefox all the links were broken, it will not open in Safe Mode or anywhere else-before I uninstall it I'd like to access save my user names and and passwords from websites- can i access them without opening the browser

    i can not launch browser toget version info or anything else, when it upgraded to newest version it stopped working-i've tried launching in Safe Mode and have tried all icons

    You can save a copy of your passwords file, but I don't think you can open it without Firefox.
    Your passwords file is in your profile folder. You might want to make a backup copy of the whole folder. Info on locating the folder: [http://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help].
    You may want to try reinstalling Firefox 3.6. You can download the installer from http://www.mozilla.com/firefox/all-older

  • Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

    Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
    Rp

    1. in physical connections part can i use the same work schema
    2. Can i use same contexts created or do i need to create everything as new and then try?
    Thanks,
    Rp.
    Hi,
    As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
    Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
    And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

  • I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each like in version 10.6

    I recently upgraded to 10.8 from 10.6 and I would like to be able to see the folder/file size for each, like in version 10.6. It used to show the size at the bottom of the "window" for the selected folder,drive etc.

Maybe you are looking for