Upgrade NI-FBUS 3.2 and NI-Configurator 3.1

Is it possible to upgrade my NI-FBUS Communications Manager version 3.2 to Version 3.2.1 and also use NI-FBUS Configurator Version 3.1?
According to the install notes for NI-FBUS software Version 3.2.1 I must use Configurator Verison 3.2. Is NI forcing me to buy a new configurator to upgrade my Communications manager?

I am sorry that maybe our sales rep made some mistake. Configurator 3.1 and Configurator 3.2 use separate license. 
You do not need pay $1700 for a new Configurator 3.2. NI provides the upgrade package of Configurator 3.2 for customers that have already purchased earlier version. The price is much lower.
Please contact local sales rep for the upgrading. If there is any other question, please send us email to [email protected]
Feilian (Vince) Shen

Similar Messages

  • Upgrade SP09 to SP14 SLD and CMS configuration lost

    Hi all,
    I have upgraded the Java Infrastructure successfully, but I had to reconfigure the SLD (object server etc.) as well as the CMS track information in order to get the Infrastructure working again. Luckyly I only had a test track with test components set up otherwise I assume I would have lost my work.
    Is this supposed to happen? I can't imagine that this is the way an upgrade for a development infrastructure should work. Somehow the configuration data should be stored and reimported after the upgrade.
    Maybe I missed something during the upgrade regarding the preserving of the configuration data.
    Has anyone made the same/a better experience during the JDI upgrade?
    Any input is greatly appreciated.
    BR Helga

    Hi Helga,
    I did several updates of NWDI yet and never had such a problem.
    My updates
    Java & ABAP Stack: SP07 --> SP09
    Java Stack: SP09 --> SP11
    Java Stack: SP09 --> SP12
    Regards
    Helmut

  • My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

    My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

    a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
    The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

  • Push email (MS exchange) works intermittently after upgrade to ios 5.1 and ios 5.1.1

    I have an iphone 4 with my office email (MS exchange) account configured. Other accounts are Gmail & iCloud.
    Office email is configured as Push, Gmail as Fetch and iCloud as Push.
    Till ios 5.0.x everything was fine. Office emails were getting pushed and there were no issues.
    However after upgrading/restore to ios 5.1 & then 5.1.1 push email mostly does not work.
    Few observations :
    1. Push email works fine when I am at home on wi-fi.
    2. When I leave home for work (therefore on 3G), mails stop getting pushed. Sometimes they get pushed for a period of 1 to 2 hours. Then they stop
    3. Manually fetching office mails also does not work
    4. Strangle accessing the office webmail site in Safari https://mail.xxxxx.com does NOT work. While i can load other sites in safari, the mail site does not load.
    5. In office sometimes in the lift phone switches from 3G to Edge or no signal and then when out of the lift, suddenly mails get pushed, but then stop after some time.
    6. Moment I get onto wi-fi, push emails start working
    7. There is no issue with accessing gmail.
    8. Other push notifications work (gmail app, facebook notifications etc)
    9. There have been no changes to our MS exchange server
    10. I have tried the usual stuff of resetting network settings, rebooting the phone, killing the mail app, going to airplane mode, deleting the mail a/c and recreating etc etc. But no luck.
    Apart from upgrading/restoring to 5.1 and then 5.1.1, there have been no changes. The upgrades were done OTA, restore from 5.1.1.
    However both times I have not set the phone as new and have restored backups.
    Is anybody facing a similar issue ?
    Any suggestions ?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
    Final Cut Studio 2 (Including Final Cut Pro 6)
    • A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    • 1GB of RAM
    • An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    • A display with 1024-by-768 resolution or higher
    • Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
    • QuickTime 7.1.6 or later
    Additional Recommendations
    • 2GB of RAM when working with compressed HD and uncompressed SD sources
    • 4GB of RAM when working with uncompressed HD sources
    • A display with 1280 x 1024 resolution or higher
    Additional Requirements for Motion
    • A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
    • A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
    • For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
    Additional Requirements for Color
    • The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
    • ATI Mobility Radeon X1600
    • ATI Radeon X1600
    • NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
    • For 32-bit rendering: a graphics card with at least 256MB of VRAM.
    • A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
    • A three-button mouse for full functionality
    Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

  • Upgrading from 7 to 9 and server monitor

    We just upgraded from cf7 to cf9 and are getting a message in the server monitor that is is unavailable in this version. Our server is Windows 2003 and IIS6 with the standard edition.
    It appears to be the issue covered by this tech note
    http://kb2.adobe.com/cps/527/cpsid_52797.html
    The files in the tech note though are for cf8, which we never had, so I'm not sure if it will work (and I'm a bit leery to experiment on a production server).
    Matt

    We did not do a 30 day trial install, if that is what you mean.
    We did make a clone of the production server (since it is a vm) and installed it. The server monitor was not something we looked it. Our configuration has some quirks in that we process htm and html requests thru cold fusion. So that was the main focus and debugging nature of our testing. We also had some data source issues.
    The server monitor is something we didn't have in 7, so I was just "checking it out" now that we are live on production.

  • Upgrade CS-MARS-20-K9 and licensing

    My CS-MARS-20-K9 version: 4.2.1 (2251). I want to upgade to lastest version 6.0.7.
    I see two way to upgrade:
    method 1. re-image using a 6.0.1 dvd recovery. and upgrade use other patch: 6.02, 6.03, 6.0.4, 6.0.5, 6.0.6, 6.0.7. I lose my database this way.
    Method 2. upgarde to 4.3.6 (upgrade around 15 patch from 4.2.1 to 4.3.6) so I can upgrade to 6.0.1 and upgrade use other patch: 6.02, 6.03, 6.0.4, 6.0.5, 6.0.6, 6.0.7. I wont lose database.
    Is this correct method?
    I know csmars v 4.x using license is 25 key string. And cs-mars use licence file recently. If I upgrade as above, I still can use  25 key string license?
    thank you

    Yes the two options you have mentioned are correct. The only difference being (as mentioned) in method 1 you will lose all the configuration while in method 2 you will be migrating the data from 4.3.6 to 6.0.1.
    "I know csmars v 4.x using license is 25 key string. And cs-mars use  licence file recently. If I upgrade as above, I still can use  25 key  string license?"
    The license format depends only on the  MARS appliance you have. For all MARS Gen1 appliances, the license is a 25 character string while for Gen2 appliances, it is a license file. So basically, the license format following the upgrade of your MARS will still be the 25 character string.
    All the best!!
    Thanks,
    Prapanch

  • UWL and POWL configuration

    Hi all,
    we recently upgraded our SRM 5.0 system to SRM 7.0.
    I'm working on the initial configuration of the system and need some inputs on UWL configuration.
    We are not using solution manager.
    Can someone send me the links for UWL and POWL configuration in SRM 7.0?
    Also whose responsibility is UWL and POWL configuration?

    Hi,
    UWL configuration is explained here http://wiki.sdn.sap.com/wiki/display/EP/Portal7.0andSRM6.0Integration(PartIII)
    Also you could use http://help.sap.com/saphelp_srm70/helpdata/en/48/56d4a5e2b61ed2e10000000a421937/frameset.htm
    No POWL configuration is needed.
    Regards,
    Nikhil
    Edited by: Nikhil RGupta on Aug 4, 2011 10:05 AM

  • Upgrade Ram, HD to SDD and New Battery for Macbook pro 2010 i7 15". (with price).

    Hi, i want to upgrade my Ram, Hard Disk and Battery of Macbook pro 2010 Model with i7 processor and 15" display.
    My current configuration:
    Ram: 2GB + 2GB (original with mbp purchase)
    Hard Disk: 500 GB (250 GB full)
    Battery: Cycles - 669 and Health - 87 % (As show by istat)
    New configuration I want:
    Ram: 8 Gb best of all (what to do with the previous 2GB + 2GB Ram)
    SSD:Minimum 128 Gb ( what to do with previous 500 GB

    I ignored the (with price) part. Sorry.
    Crucial m4 512GB SSD - from Amazon - $389.99.
    Crucial m4 256GB SSD - from Amazon - $203.84.
    Crucial m4 128GB SSD - from Amazon - $112.87.
    Crucial 8GB RAM for 2010 15" MacBook Pro - from Crucial - $47.99.
    What to do with your old RAM? Just trash it or label it and put it in an anti-static bag and put it in your 'parts' drawer. Or trash it. Or give it away. It's not worth anything.
    Good luck,
    Clinton

  • Performing targets discovery and agent configuration --- HANGS

    Hello,
    I'm running Grid Control 10.2.0.4 on windows2003 server. I have installed the agent on a number of systems with no problem.
    BUT, on one server the install seems to HANG during the:
    "Performing targets discovery and agent configuration" step.
    below is the last entry in my log file. So a couple questions:
    1. Any ideas what is going on?
    2. If I cancel it the install, can I restart it manually (agentca -d ???)
    3. What logs should I look at.
    I have tried installing it on this server several times with no luck. I also had problems upgrading from DB 10.2.0.1 to 10.2.0.3. The DBUA would say "thinks this is a Rerun operation" and recommend I remove some file that doesn't exist (but this is a seperate issue, just included it FYI).
    installActions2008-03-13_03-03-56PM.log
    Backing up files and inventory (not for auto-rollback) for the Oracle Home
    Backing up files affected by the patch '5961654' for restore. This might take a while...
    Backing up files affected by the patch '5961654' for rollback. This might take a while...
    Patching component oracle.oracore.rsf, 10.2.0.3.0...
    Copying file to "g:\oracle\agent10g\bin\oracore10.dll"
    Copying file to "g:\oracle\agent10g\rdbms\admin\oracore10.sym"
    Copying file to "g:\oracle\agent10g\
    lib\oracore10.lib"
    ApplySession adding interim patch '5961654' to inventory
    Verifying the update...
    Inventory check OK: Patch ID 5961654 is registered in Oracle Home inventory with proper meta-data.
    Files check OK: Files from Patch ID 5961654 are present in Oracle Home.
    The local system has been patched and can be restarted.
    OPatch succeeded.
    Finished one-offs apply...
    Deleting the files...
    Finished deleting the above files...
    INFO: Configuration assistant "Oneoff Patch Application" succeeded
    INFO: Command = oracle.sysman.emcp.agent.AgentPlugIn
    INFO: Install area Control created with access level 1
    Performing free port detection on host=gridTEST
    Securing the agent
    Performing targets discovery and agent configuration
    CfmLogger_2008-03-13_03-10-51-PM.log
    INFO: oracle.sysman.top.agent:Executing Command: g:\oracle\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe G:\oracle\agent10g\sysman\admin\discover\oracledb.pl G:\oracle\agent10g gridTEST

    I get:
    G:\>emctl status agent
    Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.4.0
    OMS Version : 10.2.0.4.0
    Protocol Version : 10.2.0.4.0
    Agent Home : g:\oracle\agent10g
    Agent binaries : g:\oracle\agent10g
    Agent Process ID : 3548
    Agent URL : ( I deleted this)
    Repository URL : ( I deleted this)
    Started at : 2008-03-13 17:21:11
    Started by user : SYSTEM
    Last Reload : 2008-03-13 17:21:11
    Last successful upload : 2008-03-13 17:21:56
    Total Megabytes of XML files uploaded so far : 0.30
    Number of XML files pending upload : 3
    Size of XML files pending upload(MB) : 0.17
    Available disk space on upload filesystem : 9.55%
    Last successful heartbeat to OMS : 2008-03-13 17:21:25
    Agent is Running and Ready
    G:\>emctl pingOMS
    Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    EMD pingOMS completed successfully
    Now I see the server in Grid Control. THANKS!!!!!!!!!!!!!!

  • Recently updated MBP and Apple Configurator. Since updating the Update iOS option for Apple Configurator forces me to update the iOS. Thoughts?

    I have a MacBook Pro (Retina, 15-inch, Late 2013)
    Processor: 2.3 Ghz Intel Core i7
    Memory: 8 GB 1600 MHz DDR3
    Graphics: Intel Iris Pro 1536 MB
    OS: OS X Yosemite Version 10.10.1
    Apple Configurator
    Version 1.7.1 (550)
    Since upgrading both the OS and Apple Configurator I can no longer select the option to not update the iOS when I prepare a device. It is currently selected as When update is available. Also the option appears to be grayed out. Any thoughts?

    Google maps is now available in the app store and the carrier update that your refering to was for cell data usage while on wifi. It is perfectly fine to do the update. No issues that i had from that update.

  • Help! Have just upgraded my iphone5 to iOS7 and now I can't open my Spreadsheet.

    Help: I have just upgraded my iphone5 to iOS7 and now I can't open my Spreadsheets........

    That one is typically caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.) The following document may be of some assistance:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • Have a mbp late 2011 2.2Ghz original config with 4G of ram 1333mhz , have upgraded ram to 8G of 1600mhz than upgraded with 16G of 1333mhz and find it much slower, should i return to previous config ?

    Cheers everybody, new here...
    I know, despite the specs published 8Gmax and 1333mhz, for the macbook pro late 2011 2.2G i7 processor
    We can read here that its possible to go 16G ram, and also to 1600mhz.
    1-have a mbp late 2011 2.2Ghz i7 (original config with 4G of ram 1333mhz)
    2-last w/e have upgraded ram to 8G of 1600mhz found it seemed to work fine and it was fast
    3-than upgraded with 16G of 1333mhz and find it much slower
    Not sure of what to do from now :
    wondering if it could be that 8G 1600mhz is optimal ?
    I havent tried 16G of 1600mhz yet...

    Hi there !
    Update:
    Here are the last changes, as of this morning, of the configuration on my macbook pro late 2011 (2.2Ghz processor 15.4 screen).
    Now have 16 G (2x8) of Kingston RAM 1600mhz (12800 1.35V) that and a brand new 256G samsung 850 pro SSD.
    I KNOW...NOT QUITE THE SPECS SUPPLIED FROM APPLE/INTEL ... :/
    I was able to trade the 16G 1333mhz purchased RAM for 16G of 1600mhz , so i gave a shot...
    So im happy about the result and hope this will last and not fry in the next weeks...
    Honestly It's running quite well and fast too.
    Thanks everybody and good luck
    p.s.
    And Here, as promised, the answer from Intel :
    joe_intelIl y a 3 jours
    The document does not list all the processor models but it is the correct document for your processor family (http://ark.intel.com/products/family/59136/2nd-Generation-Intel-Core-i7-Processo rs#@Mobile). "1Gb, 2Gb, and 4Gb DDR3 DRAM technologies" refer to SDRAM density, it is not about capacity as it is usually expressed in GB (instead of Gb). SDRAM density depends on the total amount of memory chips on the stick and per side (SDRAM organization). Memory modules rated or sold as 1600 MHz may or may not run at 1600 MHz; this depends on the Serial Presence Detect. If the SPD is 1333 MHz it will run at 1333 MHz by default unless it is configured manually. If the memory runs at 1600 MHz (by SPD or set up manually), the memory controller might be running at a higher clock speed than what it was designed for, this may cause issues along the way.
    Recommandation1
    B BIl y a 10 heures
    Hi JoeThanks for the answer Im feeling optimistic...I installed 16G(2x8) ram on my late 2011 macbook pro this is 1600mhz 1.35v ram.Its working fine for now...Hope it lasts;)

  • Intranet DOWN!! Help, please!! I installed SP2010 SP2 and the Configuration Wizard Stopped at Step 5. I found errors 100 and 104 in the Event Viewer!

    Hi, 
    Help, please.
    Intranet DOWN!! Help, please!! I installed SP2010 SP2 and the Configuration Wizard Stopped at Step 5. I found errors 100 and 104 in the Event Viewer!
    Acording to these entries:
    http://blogs.technet.com/b/sbs/archive/2011/08/19/two-commands-you-should-always-run-first-when-troubleshooting-companyweb.aspx
    https://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http%3A%2F%2Fwww.techtask.com%2Fsharepoint2010%2Ffehlermeldungen-nach-sharepoint-2010-service-pack-1-installation%2F
    In order to fix this, I need to run:
    PSConfig.exe -cmd upgrade b2b -force -inplace -cmd application content -install -cmd install features
    But SP doesn’t recognize “b2b”.  is the the content or config db?
    Thanks in advanced

    Your Syntax is bad. b2b should follow -inplace, it doesn't make sense anywhere else in the command. Have a look here for more detail:
    https://technet.microsoft.com/en-us/library/cc263093%28v=office.14%29.aspx?f=255&MSPPError=-2147217396

  • I have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated

    i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
    i have also tried 4 different chargers both official apple and non official

    i have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means

Maybe you are looking for