Upgrade NW7.0(Java Only) to NW7.1 CE/NW7.2 CE

Hi,
Does anybody know if there are any tools(SAPINST,JUP, etc.,) available in SMP(service market place) for upgrading NW7.0(Java Only) to NW7.1 CE/NW7.2 CE?
Thanks, regards,
Krishna

Hi,
NW 7.0 Java and NW CE both are separate product. So, its not possible an upgrade from one product to other product.
Thanks
Sunny

Similar Messages

How to go from NW 7.0 (and 7.0 EhP1) to NW 7.0 EhP2 Java only.

Hi, I'm trying to figure out the correct way to go from NW 7.0 (and 7.0 EhP1) to NW 7.0 EhP2 on a single stack system (Java Only).
Some threads on the forum mention the use of SAPEHPI, however, when I go to see the SAPEHPI guide for Java (http://service.sap.com/instguides -> SAP NetWeaver 7.0 (2004s) -> Maintenance -> Enhancement Package Installation on Existing SAP Systems -> SAP Enhancement Package Installation on Java Systems (using SAPehpi) -> Windows), there are two statements on the constraints section:
- Do not use the SAP Enhancement Package Installer to only install Support Package stacks. This function is exclusively supported for ABAP-only systems.
- Do not use the SAP Enhancement Package Installer if you want to update only the Java stack of a dual-stack system. For this scenario you must use the Java Support Package Manager (JSPM).
That leaves me confused.
On the SP Stack application for NW 7.0, there is no EHP2 option on the target system drop down (as there is for EHP1, meaning you can use JSPM to move from 7.0 to 7.0 EhP1), also, on the SP Stack application for NW EhP2, on the source system, there is no option to select a a 7.0 nor 7.0 EhP1.
So, what is the correct way to upgrade/update from NW 7.0 or NW 7.0 EhP1 to NW 7.0 EhP2 (consider this is for a single stack system: Java AS with EP and EP Core)?
Thanks in advance!

Wat is the SPS level of your Solution Manager??
Regards,
Nirmal.K

PI 7.31 Java only stack (PI and Orchestration package) post installation

Hi,
Recently we installed PI 7.31 server, i searched in sdn but i couldn't get any post installation steps.
Could you please provide PI 7.31 Java only stack (PI and Orchestration package) post installation steps.
Thanks,
Venkata Ramesh

HI Venkata Ramesh,
Ref: UPGRADE TO SAP NETWEAVER PROCESS INTEGRATION 7.3
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/505374f4-9cbe-2e10-a6b9-c74a22924d26
Regards,

Java-only, Component based message alerting - loopback to sender system

Dear guys,
we are using the alert framework availbale on PI 7.11 to notify the sender system if there is an alert for specific interfaces. In that case a customer function module is called giving the message id of the request message (message is sent via ABAP proxy). As a result the according entry in customer table is updated.
The implemntation is based on the BADI ALERT_MODIFY_TEXT and uses the standard function module ALE_BAPI_GET_UNIQUE_RECEIVER to determine the system /rfc destination to send the alert notification.
This solution works fine so far.
As PI 7.11 dual stack is not the latest release, we are thinking of upgrading to current PI/PO release. In this context also shift to java-only installation is contemplated which will need an alternative solution for the described alert/error notification loopback.
Are there any possibilities analog to BADI to implement such a solution?
What are your approaches regarding this requirement in the context of java-only?
Any help/thoughts appreciated.
Best regards,
Jochen

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Install ABAB stack after a JAVA only install

Does anyone know if I can install the ABAB stack after allready doing a Java only install. We are in the porcess of upgrading our EP5 Portal to a NW04 portal version. In EP5, the unification technology for web-gui is on a separate server were-as in NW04 it is integrated into the ABAB stack during an Add-In" installtion. The problem is that I allready did a JAVA only install and I now need the the unifier capability in the portal.
Any suggestions ???

Hi Stephen and all the others in this message,
The only install options are:
Install Abap only
Install Java only
Install Abap+Java add-in
So it's not possible to add a Abap install to a Java only installation. SAPInst has no options for this. Also rewriting all the startup scripts and stuff will be more work than just doing a new install Abap+Java add-in.
Best regards,
Hay

Error in bootstrap within patching of NW PI 7.40 AEX (Java Only)

Hi all,
we are suffering an error witin patching a NW PI 7.40 AEX (Java Only)
In SUM we get the following error when SUM wants to stop / start system in execution phase
FATAL: Critical shutdown with exit code [2150] was requested due to [AS
Java
cannot be started; core service [tc~lm~nzdm~crrsrv] failed to
start]
We already checked note http://service.sap.com/sap/support/notes/1713021 for this with no luck.
We are getting the following output in bootstrap
Starting to initialize database connection
Exception occurred for component [internal/unkown] of type [unkown]
com.sap.engine.bootstrap.SynchronizationException: Storage access initialization failed due to OpenSQL error.Check if your db driver file is avail
able on the file system or if the user has correct permissions for that file
        at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:146)
        at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
----------==[ Caused by: ]==----------
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
        at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.<init>(DBConnectionPoolImpl.java:171)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandlerImpl.<init>(PersistenceHandlerImpl.java:50)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationController.<init>(ConfigurationController.java:139)
        at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:309)
        at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:59)
        at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:138)
        at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: The check record (key "$internal/check") was not found in the sto
re although this store is encrypted..
        at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
        at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:143)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:143)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:115)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.<init>(DBConnectionPoolImpl.java:164)
        ... 12 more
Caused by: com.sap.security.core.server.secstorefs.FileInvalidException: The check record (key "$internal/check") was not found in the store altho
ugh this store is encrypted.
        at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:2048)
        at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:793)
        at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:784)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:128)
        ... 14 more
[Bootstrap]> Error during synchronization. More details: the previous log entries
Do you guys have any clue on this?
Any help would be greatly appreciated.
Many thanks
Jens

I'd like to share some updates on this:
We discovered, that the line having "$internal/check" within SecStore.properties was indeed commented out. However we did not do that manually. We removed the comment from that file manually (which might be a mistake) but in doing so we at least got some progress but having some other errors:
We find now following Messages in the dev-jstart-logfile:
* WARNING => SfCEventDispatcher::processQueue: rc 3 (invalid function argument) from SfCJavaProcHandler(server0)([mType=PROC_CMD, mRepl y=TRUE, pca=[cmd=GET_CALLSTACK, procId=2, arg=65], mpEvent= [mType=NODE_CMD, mReply=TRUE, nca=[cmd=GET_CALLSTACK, nodeId=2]]])
[sfxxevt.hpp 3152] F [Thr 01] *** WARNING => SfCNodeManager(server0)::onReply: command 2010 GET_CALLSTACK returned 3 invalid function argument.
Executing sapcontrol -GetProcessList you can see that all precesses are running but jstart is yellow (some processes are running). Checking the message Server logfile you can find:
[Thr 01] Wed Feb 26 14:32:03 2014 [Thr 01] LOGOUT: J2EE106864420 [10.6.1.174] (ENQ) [Thr 01] *** ERROR => MsSSend: NiBufSend (rc=NIECONN_BROKEN) to C1
(JC_rs174QSF_QSF_10) [msxxserv.c 13557] [Thr 01] *** ERROR => MsSSndInfo: cant send info request to C1
(JC_rs174QSF_QSF_10) [msxxserv.c 13778] [Thr 01] LOGOUT: JC_rs174QSF_QSF_10 [10.6.1.174] (DIA )
Any help would really be great.
Thanks and kind regards
Jens

Error while Installing NW701 EHP1 JAVA Only on AIX/DB2 UDB

Hi All,
While Installing NW701 EHP1 JAVA only on AIX/DB2 UDB platform I am getting below erron in Update Database Registry Step.
Previously system was installed with DB29.1 patch level 7 whiach was wrong. Then I have uninstalled SAP and cleaned all the mounted directories related to SID. After that I stsrted again and getting below error.
The step UpdateDB2Registry with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_UpdateDb2Registry|ind|ind|ind|ind|13|0|UpdateDB2Registry was executed with status ERROR .
Imediate response would highly appreciated and rewarded.
Best Regards
Devendra

Hi,
Check file system characteristics, it should be created with read and write only. Please make sure that file system should not be created with cio option.
Thanks
Sunny

How to get Test Utility for PI 7.3 Single Stack JAVA only.

Hi All,
We are having PI 7.31. Single Stack JAVA only.
we want to test some scenario. Can anybody tell me how can i test the scenario in PI 7.3
is there any test utility by which i can send some test messages to PI 7.3.
from where to download this utility.?
Regards,
Umesh

Hi,
The test message functionality is currently available in PI dual stack only..
Lets hope that in future releases this functionality may available in Single Stack also.
Regards,
Mastan vali

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

How to find Traces in SAP PI 7.3 java only stack

Hello Experts,
How to find the trace logs and pipeline steps in sap pi 7.31 java only stack, which we will get in below areas,
1. In sap pi dual stack , SXMB_MONI (abap stack) in window 1
2. In sap pi dual stack , monitoring--->integration engine--->message monitoring----> xml messages(data base)
I already found some blog related to the logging but i doesn't help to find the traces which we get in SXMB_MONI (window 1, trace)
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/09/18/tracing-in-sap-pi-731-single-stack
Your suggestions are highly appreciated.
Thanks & Regards,
Venkat

Hi,
In Single stack we go for ICO instead of classical configurations(Pipe line steps(SA,RA,RD,ID)).
Link you are referring is to find the display of traces that you put in your UDF or Java mapping or XSLT mapping .
If you want to see the traces/payloads of end to end flow ,then you can see the same either in your communication channel monitoring/receiver channel or via message monitoring/adapter engine-->message log
If you want to see payloads in the below steps .you can also do so by following the below link.
Message Staging and Logging Options in Advanced Adapter Engine of PI 7.3x
Processing Step
Description
AM
After mapping step, but before outbound schema validation
VO
After outbound schema validation
BI
After sender adapter processing, but before inbound schema validation
MS
Before mapping step
VI
Before scenario look-up step (check if scenario is local Advanced Adapter Engine based or dual-stack based involving Integration Engine)
Regards
Venkat

Requirement to be fulfilled using PI 7.3 Java only installation

Hi Experts,
We have a requirement depicted as below and need to confirm if the same is possible in PI 7.3 JAVA only
installation where there is no possibility of using ccBPM.
Step 1. System A sends web service request to PI,
Step 2. PI sends the request to System B which is a web service call
Step 3. System B sends response back to PI
Step 4. PI gets the response from System B, this response needs to transformed and mapped and sent to System C web service request.
Step 5. The response from System C needs to be sent back to System A which initiated the call.
Please give a thought based on your experience and expertise if this is possible; given the limitation of java only installation which is without ccBPM.
- Shripad

Hi Shripad,
For modeling with BPMN, refer the below guide:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c052052e-fbab-2b10-0d9a-9feed5463589
SOap look up in mapping from System B response to System A should solve your issue.
--Divyesh

How to handle dynamic receiver detemination in PI 7.3 java only

1. I'm doing the file to idoc scenario, i have to give the control record mandatory feilds dyanmically i.e at runtime. what are the steps i need to follow. plz share some relavant documents.
2. How the dynamic receiver detemination is worked in PI 7.3 java only, share relavant documents.

1. I'm doing the file to idoc scenario, i have to give the control record mandatory feilds dyanmically i.e at runtime. what are the steps i need to follow. plz share some relavant documents.
http://forums.sdn.sap.com/thread.jspa?threadID=1901278
2. How the dynamic receiver detemination is worked in PI 7.3 java only, share relavant documents.
does not work in 7.3 in ICO - only on dual stack 7.3 without ICO
and refer below blog
http://forums.sdn.sap.com/thread.jspa?threadID=2124493

Abap+java OR java only for EP6.0

abap+java OR java only for EP6.0

Hi charles,
you question is not clear.
If I correctly understood you are you asking the skills required to work on EP6.0?
If it is so I cam more java skills required and if you want to develop customized iview you may require bit of ABAP too.
Hope it helps.
Regards,
B.Guru Subramaian

Deploy MS SQL Driver in PI 7.4 Java Only

Hi Experts,
We have a requirement to use JDBC adapter to connect to MS SQL Server. For that jdbc driver should be deployed on PI.
For that i have downloaded .jar from MSDN - sqljdbc_4.1.5605.100_enu.exe
I have gone through several threads & SAP note 1138877 - How to Deploy External Drivers JDBC/JMS Adapters on SCN but not completely understood.
Please help me with this, how can i deploy it on PI 7.4 Java only?
It would be a great help and highly appreciated.
Thanks in advance.
Regards,
Dipen.

Hi Hareesh,
Thanks for a quick reply.
I have gone through those several blogs & threads but still i am running out of clue.
Should i do it with SUM or directly it is possible from NWA as per below link?
Configuring JDBC for SAP Enterprise Portal - Configuring the Portal for Initial Use - SAP Library
Please advice.

Table in PI JAVA only system & Report development in JAVA only system

Dear Experts ,
We are migrating from Dual to Single stack JAVA only PI system.
In Dual stack system all the message data are stored in ABAP table from which MONI pulls data .
But in JAVA only system how data is stored ..? and how to access those table ..?
we need a report to develop which will have these data .
Interface name
Date & time of run
Key Data (if possible would like to see key data from the run, for example po number, material number, part number, idoc number would all be considered key data)
Pass/Fail flag
Error Message (only required if the run failed)
How & where to write code to develop this report ...?
thanks
Shakif

Hi Shakif,
Look at this link:
Message details and AuditLog from Java Stack using Custom WebService
and this link about the Java Data Browser:
Open SQL Data Browser - Process Integration - SCN Wiki
Best Regards
Harald

Upgrade NW7.0(Java Only) to NW7.1 CE/NW7.2 CE

Similar Messages

Maybe you are looking for