Upgrade of Devlopment box using CU&UC is done. How to verifiy?

Dear team,
We need your Advise at earliest possible as requested by our
Management.We have performed CUUC ( Combined Upgrade & Unicode
Conversion ) of our
Development System from 4.6C to ECC 6.0 on HP-UX 11i v3.
We are a bit concerned about the Unicode Conversion steps performed. Since we are not sure of the language assignments during upgrade if they were correct or not.
We opened a message with SAP and the reply was this is not a support issue but rather consulting.
How can we check/verify our system before proceeding to QA and production ?
Regards,,,

So yes - then this error is expected.
Someone entered that data apparently using an English login - and this is WRONG, one MUST NOT do that because the data is stored in the database with the logon language, thus the data is in ENGLISH ASCII characters.
If you do the same thing again (logon in English and display), then it's correctly displayed.
The Unicode conversion took the language key (which is is EN since the data was entered with an english logon) and converted it accordingly. Now it's corrupted due to this.
There's nothing you can do but correct it manually because the user did the mistake of entering that data with the wrong logon language.
Markus

Similar Messages

UPGRADE 4.6C to ECC 6.0 is done / how could I Start the Unicode

HI Guys,
we upgraded successfully our 4.6 C (MDMP) to ECC 6.0 (<b>NON Unicode</b>).
Could you please say if I had this understand right:
if I would like to start now the unicode conversion, I need this DVD "SAP NetWeaver 2004s Installation Export DVD" and there is "sapinst" that started the conversion to ECC 6.0 UNICODE.
Is that right ?
Of course if you have any documentations that could be helpful, I were very thankful.
My email is [email protected]
Regards,
Alessandro

Hello Alessandro,
Before you do anything, please find the documentation as in note 551344.
Read the complete Unicode Conversion Guide (UCG) before starting to
prepare the conversion procedure. You can download the applicable
document version from this Note or from SAP Service Marketplace at:
http:// service.sap.com/unicode@sap -> Unicode Library -> Unicode
Conversion Library. Here you will also find additional documentation,
overview presentations, other help material, Unicode-related SAP Notes
and useful links as well as information about current developments.

Im using Mac OS X 10.6.8 and want to upgrade to the new lion. Does it matter how i do it?

Im using Mac OS X 10.6.8 and want to upgrade to the new lion. Does it matter how i do it?

Does your computer meet the requirements:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Recommended process:
How to Install Lion Successfully - You must have Snow Leopard 10.6.7 or 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade to Lion:
Purchase the Lion Installer from the Mac App Store. The download will start quickly. Lion is nearly 4 GBs so a fast internet connection is essential. Download time could run upwards of 4 hours depending upon network conditions and server demands at the time.
Boot From The Lion Installer which is located in your Applications folder.
Follow instructions for installation.

The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

Hold down shift as you right-click > Get Info to get the old style dialog box.
tt2

Extension manager would not upgrade. Alert box states could not move old extension out of the way. Suggestions?

Extension manager would not upgrade. Alert box states could not move old extension out of the way. Suggestions?

What you said confused me. Which version of Extension Manager do you use? Could you please attach a screenshot?

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

HI Team, Recently One week back I bought a new iphone 5 from India. They have given me a used mobile which has a different IMEI number when compared to the IMEI number present on the box. Please let me know how to proceed further

When you went back to the place where you purchased this phone, & asked them, what did they say?
No one here can help you with this, nor can/will Apple. You need to take this up with whoever you purchased this phone from.

How can I automatically close a dialog box using Javascript after I click the OK button to submit it?

How can I automatically close a dialog box using Javascript after I click the OK button to submit it? I don't want to have to X out of the dialog box after I am done.
Thanks
Linda

JS can not interact with open dialogs in any way, unless it's a dialog
created in JS using the Dialog object.
On Thu, Jul 24, 2014 at 11:13 PM, lindaeliseruble <[email protected]>

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

I upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

Thank you. I followed the faq#14 (using setup wizard from the osx install disk). Everything went just as planned until I woke up this morning and noticed there was no progress on the "transferring documents" meter. It stopped about 1/4 of the way. I can hear the computer working and the bar is somewhat animated like it is advancing but it's not.
Should I cancel and restart or should I wait it out? It already been about 13 hours since I started the process. Do you think it is my time machine or my iMac? Maybe the time machine file is corrupt or something.
Anyway, any help is appreciated. Thanks.

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

How can I change the background color in text box using RGB format

Can some one tell me if Mac Pages (version 5.0) allows users to customize the background color of a text box using RGB color format? It appears that the text color can be changed using RGB but background color is limited to a few standard colors. Thanks

They are just sample swatches, use the Color Picker to choose anything you want.
Peter

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.

I have a white unibody macbook 6.1 running 10.6.8 and I would like to upgrade so I can use icloud. what is my best option? as it looks like its too old to run mountain lion? thanks!

I have a white unibody macbook 6.1 running 10.6.8 and I would like to upgrade so I can use icloud. what is my best option? as it looks like its too old to run mountain lion? thanks!

They are Safari bookmarks and Snow Leopard Safari will open in Mountain Lion, but won't give you a window?????
Here are the bookmarks, since I'm now in Snow Leopard:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
http://ihelpyourmac.com/wordpress/?p=23
http://hints.macworld.com/article.php?story=20111014102515403
http://hints.macworld.com/article.php?story=20111014102515403
Advance warning - Mail worked fine.
I had fits with the last link I posted. At first it worked fine, then all of a sudden, it quit working. I now have iCloud - iCal syncing, but iCal is read only. Not a real big deal since you can log onto iCloud using Safari and post a new event.
I finally gave up on Address Book because it kept creating multiple contacts, which if you tried to merge or delete the multiple contacts, the contacts were deleted. It also worked at first and then stopped working as it should.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help.

Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.

cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns.

Upgrade of Devlopment box using CU&UC is done. How to verifiy?

Similar Messages

Maybe you are looking for