Upgrade of gtk2-2.12.0 to gtk2-2.12.1 creates theme icon problems
Running pacman -Su caused gtk2 to be upgraded from 2.12.0 to 2.12.1. After the system update many of the button icons in Rhythmbox were missing. Running Rhythmbox from a console showed errors regarding an inability to access specific themed icons. Also, Nitrogen would not run, with the console showing the error:
terminate called after throwing an instance of 'Gtk::IconThemeError'
Aborted
I downgraded gtk2 back to 2.12.1. I also downgraded gtkmm (2.12.1 to 2.10.10) due to dependency on gtk2. This corrected both issues above.
You should do this steps after the upgrade , when you will run pre-upgrade check script (preupgrd.sql ) script , it will tell you what action is needed for DST as well other pre-requirements for upgrade.
If you have MOS access you can refer ti below document for more details:
Actions For DST Updates When Upgrading To Or Applying The 12.1.0.2 Patchset (Doc ID 1665676.1)
Regards
Sudhir
Similar Messages
-
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error
Did you check your security software settings? eliminating conflicts from third-party security software.
-
After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
BobOn the right of the To: field you will see a circled plus sign:
Click it. -
TS4002 Having upgraded to 10.8 some emails are disappearing before I can read them.
Having upgraded to 10.8 some emails are disappearing before I can read them.
They are present for about a second, display as notified, but are not going to junk or Trash.
The problem doesn't affect all emails and seems to be restricted to some senders.What ype of account is this (IMAP / POP)?
Perhaps it's setup on another system (computer, mobile, etc.) and downloading there, while removing from the server. You may also have email rules moving it automatically or marking as SPAM.
Changing your password may seem drastic but will ensure your current setup is the only one with access to downloading/archival of the email, and you can then eliminate other possibilities as mentioned above. -
Today I just update my iphone software to IOS5. I forgot to download pictures that were on my iphone and since the upgrade they are all gone. Is there a way to get them back?
The only restore I can find is from 2010.
-
I have recently upgraded my iPad 2 to iOS 7 and I have lost 3 app icons. The apps still appear in settings, so I can't reinstall the app as they're already there. I've tried uninstalling and reinstalling via an iTunes sync, but it hasn't helped. The 3 apps are bbc iplayer, itv player and sky go.
Can anyone help please?Have you checked to see if the Apps have been placed in an App folder?
Try swiping down from the middle of the screen so the search bar appears. Type the name of the App and if the App appears it is indeed on your phone.
You could also try restarting your device by holding the power and home button until the Apple logo appears. -
Since upgrade to kitkat, getting "312" calls on phone. How to stop them?
Since upgrade to kitkat, getting "312" calls on phone. How to stop them?
Lets put an end to these calls, Nitzie! Do the calls come from more than one number? Have you answered these calls to see what the purpose of the call is?
You can also block these numbers from calling you with our Call and Message Block. Here is how: http://vz.to/MqEgqB
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
help! I recently upgraded my iphone to the latest IOS but my GPS seems to have a problem... I am unable to get directions from one point to another ... how do I solve this problem?
If using the built-in Maps app, directions are not available everywhere. Read here:
http://www.apple.com/ios/feature-availability/#maps-directions
If that's your problem, download the Google Maps app. -
I Just upgraded to mountain lion os x to 10.8.1 and I have a problem with restart my computer.
Now my computer is stuk on restart and wont turn on.
Can somone help me with it?
Thanks.If Mende 1's suggestion doesn't solve it you might find the following useful:
I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Hope this helps -
I am using ArcGIS 10 and Firefox 6 on Windows XP.
After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). Any ideas of what could be causing this? I have also posted on the ArcGIS forum site for input from that side.
How can I downgrade to version 5? If that is the only option available.Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas? -
When I upgraded my iPhoto thumbnails, my photos disappeared. How do I recover them?
There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I recently upgraded to Lion and I had Adobe InDesign which is no longer supported. Problem is, I have several files I need but cannot open because it was PowerPC based. What do I need to do? Thanks in advance!
Assuming you registered your older version, you can retrieve the serial number by going to Adobe's site and go into your account. On this page, click the My products link in the right hand column of the first three. You'll be asked to enter your user account name and password. Once in, a list of all software you've purchased will be shown, along with their serial numbers.
That said, it really won't help you much. A PowerPC only version of InDesign means it's no newer than the original CS version, and won't be worth a cent towards an upgrade discount. To get CS6, you'd have to pay full price again. -
We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?
Check the Adobe website for compatibility.
Ciao. -
I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"? Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.
I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"? Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.
Maybe you are looking for
-
How can I set download restrictions on a web page ?
how can I set download restrictions on a web page ? I mean: to make a web site with text and pictures but in a way that the visitors cannot download the pictures or text ? Is it possible ? Thanks
-
How to use standard yahoo mail in Safari on my iPhone?
I try to get my mail through safari on my iphone using regular web-based yahoo mail. After I sign in, there is a toolbar at the bottom that has buttons like delete, compose mail etc. It was not there in the first place but I don't know what I pressed
-
I am trying to do left outer join in ODI for the source tables in SQLserver. I have created a join between 2 columns and made it left outer join by checking the box in join properties. It is not working as expected. In the query it just does T1.Col1=
-
Regarding Partner types LI and KU in WE20 transaction
Hi, I want to send a purchase order to a particular vendor through EDI. When ever I create a PO if the customer is CUST1(for example) and vendor is VEND1(for example) then only EDI should trigger. Pls give me the possible configuration steps. <b>Is i
-
Well, I got into DW quite a bit today. Spent lots of time figuring out how <br />to do things I do in GL.<br /><br />However, this one got me: I searched help to no avail. Does DW have a way to <br />automatically put the JS for the behaviors you use