Upgrade of IDES system
Hi all,
Is it possible to upgrade a IDES system BW 3.1c system to BI 7.0..?
thank you,
Hi Lakshmi,
We practiced the upgrade (2.1 to 3.5) on our development system.
We did a refresh (copy production), practiced our upgrade, made a log and refeshed again.
Until we had a scenario that was perfect we kept on doing so.
The upgrade of production succeeded in the end within 3 days downtime for the users.
Udo
Similar Messages
-
I have intel mac 10.411, want to access iTunes, won't let me unless upgrade tp itunes 10, but it needs OSX 10.5. I just want to download some music, not upgrade my operating system. It's not THAT old. Ideas?
As long as you don't need all the bells and whistles of the iTunes Store such as Ping, and don't need to sync an iOS device running iOS 4.x, then iTunes 9.2.1 should work for you. It should be available via Software Update, but if not, you can still get it here:
http://support.apple.com/kb/DL1056
but it would be best to upgrade your Mac to Mac OS X 10.5 or 10.6, since it's probable that eventually the iTunes Store will no longer support iTunes 9.x.
Regards.
P.S. Mac OS X 10.4 was discontinued three and a half years ago, so yes, it's getting rather long in the tooth. Cheers. -
I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!
There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
everymac.com has a fair amount of information across many years of Apple computing hardware...
Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
• MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)
• MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)
• MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
*But according to MacTracker (free: download database) http://mactracker.ca
these MacBooks can use more RAM in aftermarket specs as much as:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
To get more information use a service such as this...
•identify by serial number:
http://www.powerbookmedic.com/identify-mac-serial.php
The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
Anyway, as you further verify the model build year and configuration specifications, report back.
Good luck & happy computing! -
I have Garageband version 4.1.2 (248.7) installed on my early 2008 IMAC 10.5.8. I have never upgraded. If I upgrade my operating system to the next level (10.6?) will my GB version still work? I have a LOT of projects involved and hope they will transfer. Can I (and should I) upgrade GB at the same time and how far should I go with that without causing a problem with my projects? What would I gain if I upgrade GB? Thanks!
Nancyfromeasttexas wrote:
I have Garageband version 4.1.2 (248.7) [...] If I upgrade my operating system to the next level (10.6?) will my GB version still work?
my copy of 4.1.2 appears to work under 10.6.8, though i have not done extensive tests
Nancyfromeasttexas wrote:
I have a LOT of projects involved and hope they will transfer.
they should
Nancyfromeasttexas wrote:
Can I (and should I) upgrade GB at the same time
sure
Nancyfromeasttexas wrote:
(and should I) upgrade GB at the same time
v4 is pretty lonh in the tooth now, and GB only costs $15, so I'd think it's a good idea
Nancyfromeasttexas wrote:
how far should I go with that without causing a problem with my projects?
the only version you can buy new is v6,a nd it should open older projects without issue ... however you could keep 4 around:
http://www.bulletsandbones.com/GB/GBFAQ.html#installnewkeepold
(Let the page FULLY load. The link to your answer is at the top of your screen)
Nancyfromeasttexas wrote:
What would I gain if I upgrade GB?
v5:
http://www.bulletsandbones.com/GB/GBFAQ.html#whatsnew09
(Let the page FULLY load. The link to your answer is at the top of your screen)
v6:
http://www.bulletsandbones.com/GB/GBFAQ.html#whatsnew11
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Data load delay after DB upgrade in source system
we have upgraded our source system DB to oracle 11g over the weekend. The first loads of our process chain the master data is taking huge time with the message as
I am getting message as
Data Package 000001: sent,not arrived
Info IDoc 2 : sent , not arrived ; Data passed to port OK
Info IDoc 1 : sent , not arrived ; Data passed to port OK
Info IDoc 3 : sent , not arrived ; Data passed to port OK
Info IDoc 4 : sent , not arrived ; Data passed to port OK
Request IDoc : Application document posted
processing (data packet) : No data
can anyone share ideas on this
thanks and regards
Edited by: AAL123 on Sep 26, 2011 7:17 AMHi,
Check the below given SAP Notes,
Note: 580869 ( RFC calls can be processed with report RSARFCEX) & 530997.
Regards,
Durgesh. -
How to move my Developments from One IDES to Another IDES system ?
Hi,
I have one requirement that, I need to copy/move my developers developments from One IDES System ( with erp 6 ehp5) to another IDES system which have upgraded configuration ( ERP 6 with EHP6).
Both systems have same SID - XYZ,
Could anyone please suggest solution to solve the issue?
regards,
chandrababu kattaHi,
BLOBs are a different kind of data, so they won't move along if you migrate the data. If there are a lot of BLOBS you can write a data migration, otherwise you can just upload them again in your new schema.
Regards,
Joni -
I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade
iCloud requires OS X 10.7.2.
-
IDES system copy ..error during IMPORT_ABAP..unable to create indexes
Hi all,
I am doing a IDES system copy. I ran the report SMIGR_CREATE_DLL , the export activities have been completed successfully as well on the source system. Now on the target system, during the import, I am getting the following error in the log file SAPDFACT.log.
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C06~P" ON "/BI0/E0RSTT_C06" ( "KEY_0RSTT_C06P" , "KEY_0RSTT_C06T" , "KEY_0RSTT_C06U" , "KEY_0RSTT_C061" , "KEY_0RSTT_C062" , "KEY_0RSTT_C063" , "KEY_0RSTT_C064" , "KEY_0RSTT_C065" , "KEY_0RSTT_C066" , "KEY_0RSTT_C067" , "KEY_0RSTT_C068" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
The owner for this table is SAPSR3. Some oracle forums suggested to drop the index before recreating it. But when i do "drop index SAPSR3."/BI0/E0RSTT_C06~P..it says.."the specified index does not exist". But when I go to recreate this index, it doesn get created successfully. After that when I re-run the import, it again fails. Suprisingly..now if i go to check if this index is present thru a sql querry:
select owner, object_name, object_type from dba_objects where object_name='SAPSR3."/BI0/E0RSTT_C06~P"', it tells "no rows selected". This is happening everytime, I create an index, where it gets created successfully, and the import again fails with the same error in SAPDFACT.log.
I found an SAP note 885441 named..common errors during migration..although mine isnt a migration..my both source and destination are Red hat 64 bit platform.
The note 1st asks to download the latest R3load..which I did and extracted in the kernel directory of the source..then it also asked to edit the .TSK file..in my case..SAPDFACT.TSK..where the lines:
I /BIC/E<Cubename>~<index> C err
to I /BIC/E<Cubename>~<index> C ign..
I did that..this time..the import again fails..but in the SAPDFACT.log..it complains about some other index..n the same gets generated in the .TSK file as well..the earlier index error is not again generated.
I am not sure..what is going wrong..my export went through successfully.i have done the prep steps for export as well..before that i ran the SMIGR_CREATE_DLL report as well..
Any inputs are highly appreciated..
Thanks,
AkshayHi,
Check SAP Note 1166589 - Table converter: DB error when creating secondary indexes
Thanks
Sunny -
SAPUSER is locked in ECC 6.0 IDES SYSTEM
Hi Everyone,
I installed ECC 6.0 IDES SYSTEM, but the username SAPUSER is locked, I tried with various passwords but was not successfull. Is there any other way I can logon into it with this username or any other super username. Please help.
thanks,
Prashant.Hi techno guys,
I have deleted the usr02 from sql table, and managed to logged in by Sap* and Password pass,
But when I try to do something I am getting a sql error message that I do not have access or something like that,
From SU01 also I couldnt create a username or unlock because same error page is coming..
plz tell me do i need to do something after deleting that usr02 row from the table?
plz advice me .. thanks -
HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. My question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this, such as using turning off the SMS preview under the "passcode lock", well that option no longer exists, or if it does, I'm somehow missing it.
When I go to the "messages" setting under settings on my phone, I still don't see an option of turning it off.
If I can just get the name of the person sending the message, as I had it before, I'd be happy.
Help!That option still exists in Settings > Notifications > Messages > Show Prview (OFF) and View in Lock Screen (ON). Here's how to configure your Notifications and Notification Center for iOS 5: http://iphone-and-i.blogspot.com/2012/01/how-to-customize-notification-center-in .html
-
Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?
Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/ -
How do I upgrade my operating system from 10.1.1 to 10.5.8?
How do I upgrade my operating system frin 10.1.1. to 10.5.8?
kadamdog wrote:
How do I upgrade my operating system frin 10.1.1. to 10.5.8?
You can't. Nothing that runs under v10.1.1 can run 10.5.8.
No MacBook Pro can run under v10.1.1.
So something in your post is wrong. -
Unable to login to IDES system after client copy
Hi guys
the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
The client copy failed due to a shortdump in the process.
Now i am unable to login to the client 800 as it says the user password is incorrect.
How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
i do have access to client 000.
please guide me what should i do? i need the client 800 back and should be able to login too.hi,
i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
anyways thanks for your inputs
Hi guys,
any idea?
Edited by: Workflow learner on Jun 2, 2008 10:48 AM -
TIME_OUT in VK13 / VK33 on IDES system
We are receiving the following timeout when running VK13 and VK33 on our IDES system. This is standard code, and there is no notes regarding this TIME_OUT.
The Termination occurred in the ABAP program "SAPLV12A" - i
"ACCESS_REPORT_GENERATE".
The main program was "SAPMV13A ".
The whole ST22 dump is as follows:
Runtime Errors TIME_OUT
Date and Time 18.08.2010 19:35:25
Short text
Time limit exceeded.
What happened?
Error analysis
If you have access to SAP Notes, carry out a search with the following
keywords:
"TIME_OUT" " "
"SAPLV12A" or "LV12AU07"
"ACCESS_REPORT_GENERATE"
System environment
SAP-Release 700
Application server... "sap6ides"
Network address...... "10.3.3.125"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "sapC10ides"
Database type..... "ADABAS D"
Database name..... "C10"
Database user ID.. "SAPC10"
Char.set.... "C"
SAP kernel....... 700
created (date)... "May 22 2007 00:12:17"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.0.035 CL 139084 "
Patch level. 111
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 2342912
MM Used. 4880016
MM Free. 3496816
User and Transaction
Client.............. 800
User................ "MEASLE"
Language key........ "E"
Transaction......... "VK13 "
Program............. "SAPLV12A"
Screen.............. "SAPMV13A 0100"
Screen line......... 24
Information on where terminated
Termination occurred in the ABAP program "SAPLV12A" - in
"ACCESS_REPORT_GENERATE".
The main program was "SAPMV13A ".
In the source code you have the termination point in line 177
of the (Include) program "LV12AU07".
Source Code Extract
Line SourceCde
147 dff_desc_ref_field = dd08v_tab-reffldname
148 EXCEPTIONS
149 OTHERS = 1.
150 IF sy-subrc NE 0.
151 CLEAR: dd08v_tab-txttabname,
152 dd08v_tab-reffldname,
153 dd08v_tab-txtfldname.
154 ENDIF.
155 * und aufnehmen
156 READ TABLE dd08v_tab WITH KEY tabname = dd08v_tab-tabname
157 fieldname = dd08v_tab-fieldname
158 TRANSPORTING NO FIELDS.
159 IF sy-subrc EQ 0.
160 MODIFY dd08v_tab INDEX sy-tabix
161 TRANSPORTING txttabname reffldname txtfldname
162 arbgb msgnr.
163 ELSE.
164 APPEND dd08v_tab.
165 ENDIF.
166 LOOP AT dd05m_tab WHERE
167 tabname = t681-kotab AND fieldname = xt681e_tab-sefeld.
168
169 READ TABLE dd03v_tab INDEX dd05m_tab-primpos.
170 IF sy-subrc = 0 AND dd03v_tab-datatype NE 'CLNT'.
171 MOVE-CORRESPONDING dd05m_tab TO dd05v_sel.
172 dd05v_sel-forfldname = dd03v_tab-fieldname.
173 IF dd08v_tab-reffldname IS INITIAL.
174 dd05v_sel-reffldname = dd03v_tab-fieldname.
175 ELSE.
176 TABLES dd05p.
>>>>> SELECT * FROM dd05p
178 WHERE tabname = dd08v_tab-txttabname
179 AND fieldname = dd08v_tab-reffldname
180 AND checktable = dd08v_tab-checktable
181 AND checkfield = dd03v_tab-fieldname.
182 dd05v_sel-reffldname = dd05p-forkey.
183 EXIT.
184 ENDSELECT.
185 IF sy-subrc = 4.
186 dd05v_sel-reffldname = dd08v_tab-reffldname.
187 ENDIF.
188 ENDIF.
189 APPEND dd05v_sel.
190 ENDIF.
191 ENDLOOP.
192 ENDIF.
193 IF NOT dd08v_tab-txttabname IS INITIAL AND
194 NOT dd08v_tab-txtfldname IS INITIAL.
195 * Fremdtabelle lesen (Text)
196 CALL FUNCTION 'RV_TABLE_READ'
2
0
0
0> Database version. "SQLDBC 7.6.0.035 CL 139084 "
You seem to use a VERY OLD MaxDB database software.
I suggest:
- Update your MaxDB to a recent release, the version you use is very old.
- Update your database statistics to make sure the access paths for the data is optimal
- check the database parameters against Note 814704 - MaxDB Version 7.6 parameter settings for OLTP/BW
If you still use the default settings that came with the installation then it's rather obvious why your system is so slow.
Markus -
Implementing UCES in SAP ISU- IDES system
Hi,
We are interested to implement UCES in SAP ISU - IDES system which we have for our internal competency and Customer POCs/Demos. ( ECC 6 with ISU)
Could any body please share their experience or knowledge on this, that would be of very helpfull.
Many Thanks
RajaHi,
There is something called UCES - Biller Direct where is there is an Interaction Between SAP Biller Direct and Contract Accounts Receivable and Payable.
Purpose:You should use SAP Biller Direct if you want to present information about customer accounts in your Internet portal and offer your customers the option of paying bills or of creating inquiries and complaints via the Internet.
Implementation Considerations : Your customer does not need to install any SAP software to be able to use SAP Biller Direct. All functions can be carried out using a standard Web browser.
Information on the necessary system requirements and the browsers supported by SAP Biller Direct can be found in the introductory sections of the installation guide.
SAP Biller Direct consists of an application based on JavaServer Pages. The accounting system runs on a standard application server and is used as the back end for SAP Biller Direct. The transfer of data between the front end and back end is done by RFC and is ensured using the SAP Java Connector (JCO), which you install as part of the SAP middleware.
Award points if this is found useful.
Maybe you are looking for
-
My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.
-
Unexpected Signal : 11 Error??? Help needed ASAP
hello All, I have been running tomcat with SDK 1.4 on a linux for around 6 months with no major problem. The other day though tomcat began to crash, now it will not stay up. As soon as you browse a JSP page it crashes with the following error. Any id
-
Need help related to Graphs/Charts in Labview
Hi, I need some info related to Graphs/Charts in Labview. Where I am facing problem is: User has to select from a ring control , type of graph/chart he wants i.e.,XY Graph,Waveform Graph,Waveform Chart... Based on his selection I need to create that
-
How do I display a dinamic page as a portlet?
I've created a dynamic page, to welcome the user, and I can't display it in the page! How do I do it?
-
Dear Experts When I am opening XML Form builder, both my form builder window and the EP window are closed. Appreciate your response. Regards Shanmukha Rao Banisetti